Database Develop

[SOLVED] Am I bricked? PLEASE help me :(

Hi guys. I'm quite a noob, but have a good experience on flashing without be bricked (CM9, CM10, Crash, Paranoid...), but I have a problem.
I will explain to you step-by-step what I've done with my Note, so I wish some of you could help me.
1) I was running JB Crash ROM with PhilZ kernel.
2) Some apps got Force Close too often, so I went on Rom Manager and, after a look into the "Fix permissions" description ("It will fix some force closes" or something like that), I decided to give it a try and I tapped on it.
3) After that, my homescreen became unusable, because "TouchWiz Home" got EVERY TIME force closed without reason. Everything else worked fine, so I deciced to boot into CWM recovery to restore a nandroid backup of the same ROM.
4) Instead of tapping "restore", I tapped "backup" (my fault) and it started without possibility of get back. I got something like 200 Mb of free space, so in every case it will never have had success. My Note stucked at this point, so I decided to reboot manually (vol up+home+power) into recovery. Finally I tried to "restore" but I get this message: "ERROR WHILE RESTORING /SYSTEM".
5) I tried to reboot my Note, but it stucks at "Samsung Galaxy Note GT-N7000" screen without going on.
The good news is that it can go without problems into recovery and into download mode. What can I do? Flashing from CWM, for example, CM9 can fix this?
Please help me thanks!

1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....

friedje said:
1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....
Click to expand...
Click to collapse
After formatting /system, can I try to restore my nandroid backup? Or I have to necessary reflash my ROM? In that case, it's the same thing make it via CWM or via ODIN PC? I'm still on PhilZ recovery, which is safe I guess!
Anyway, thanks for your help

Via CWM or Odin, depends if you have your rom in the zip or the md5.tar format.
I would reflash to be clean. It's a bit more work in restoring your apps and data
afterwards, but at least you don't restore any messed up files.

if you can still access CMW and Download Mode then you probably are not brick... try fresh install through pc odin.. safe method no need to worry about bricking by fullwiping on unsafe kernel or raising triagle or binary counter whatsoever.. if you wanna play safe then PC ODIN and after that you can root your rom

Thank you guys, now I'm on stock ICS flashed via PC Odin and everything works fine I knew I was 99% not-bricked (still recovery and download mode avaiable), but I was a little scared too.
Thank you again!

glad you solved it.. :good:

Where to start ?

Spent quite some time searching through the forum but I'd still like a few pointers on where to start particularly (in which order).
Like;
1) Root
2) CWM
3) ROM Manager
4) SuperUser
5) Odin
6) Data wipe
7) Binary count reset
8) Recovery Manager
9) Custom ROMS
(EVEN THOUGH I'VE NUMBERED THEM, IT'S NOT LIKE I KNOW THE ORDER, JUST IN CASE YOU'RE WONDERING)
So here are my main questions:
1) In which order do I install them ?
2) Is there any relationship between them? (i.e. I thought ROM Manager let you install CWM and with CWM you can get to Recovery manager or something...)
3) Do I need the Recovery manager for recovery or for installation of custom ROMS?
4) What is the point of getting custom ROMS when I get root ?
Phone: GT-I8190
Android: 4.1.1
Baseband/Build: I8190XXALJL
Thanks in advance, and apologies for asking same question if there is a thread around here about it.
I'd prefer ppl to explain rather than referring to other threads as that got me a little confused before. (you may still refer if that thread is clear enough)

Ok. The order is
1- Root (superuser comes with it)
2- CWM
3-see the right rom for u
4- wipe data, cache, and dalvic in advanced, to flash rom
5-reset counter when u flash anthing in odin u will have a yello triangle to remove u have to reset counter ( does not effect the phone
Press like if i helped u
Sent from my HTC One X

mhoss48 said:
Ok. The order is
1- Root (superuser comes with it)
2- CWM
3-see the right rom for u
4- wipe data, cache, and dalvic in advanced, to flash rom
5-reset counter when u flash anthing in odin u will have a yello triangle to remove u have to reset counter ( does not effect the phone
Press like if i helped u
Sent from my HTC One X
Click to expand...
Click to collapse
Could u explain 3 a bit more ?
Also is there any relationship between CWM, ROM manager, custom ROMS and Recovery Manager ?

Go to development forum, pick one of the pre rooted firmwares and flash via odin. Then install rommanager app from tbe play store and flash cwm recovery. Don't worry about binary count coz triangle away app works on our phone. If you want to wipe the phone reboot to recovery and wipe data. To boot into recovery use the quick boot app from play store.
Sent from my GT-I8190 using Tapatalk 2

...and most important.. Don't forget to make a full nandroid backup in recovery before you start to apply mods and other things
Might come in handy if the phone fails to boot!

Should note that after custom rom you can't get access software update through kies air. At least I can't :-\
Sent from my GT-I8190 using Tapatalk 2

Sv: Where to start ?
Who needs Kies when there is XDA?
Sent through time and space from my s3mini.

vonuzu said:
Go to development forum, pick one of the pre rooted firmwares and flash via odin. Then install rommanager app from tbe play store and flash cwm recovery. Don't worry about binary count coz triangle away app works on our phone. If you want to wipe the phone reboot to recovery and wipe data. To boot into recovery use the quick boot app from play store.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
So if I understand this the right way; CWM recovery has custom ROMS or am I getting the wrong idea ? - Why do I need it ?
(It's just that I've been a little confused because of the mass information available on XDA, so bear with me if I'm a bit annoying
tys0n said:
...and most important.. Don't forget to make a full nandroid backup in recovery before you start to apply mods and other things
Might come in handy if the phone fails to boot!
Click to expand...
Click to collapse
Which would you prefer; Nandroid or Titanium ?
Do I need "busybox" for anything ?

Do I need Kies to connect my phone to PC btw ?
Another question: There are two recovery images on the official site of CWM, do we need to choose the normal one or the touch and what about the ROMS, do I need to install those seperately ?

Mystique03 said:
So if I understand this the right way; CWM recovery has custom ROMS or am I getting the wrong idea ? - Why do I need it ?
(It's just that I've been a little confused because of the mass information available on XDA, so bear with me if I'm a bit annoying
Which would you prefer; Nandroid or Titanium ?
Do I need "busybox" for anything ?
Click to expand...
Click to collapse
With cwm or any other custom recovery you will be able to install zip files with mods, tweaks, roms, and so on. Simply put, non-samsung-signed-things + other functions as well.
You wont find many custom roms for s3mini yet wich it to be flashed through cwm. For now i think theres only BenzRom but I guess more will come
Nandroid or Titanium ? BOTH!
Nandroid for restore if something goes really bad, and remember to make sure you have a backup before you apply changes or mods. If you dont like it you can easily go back to previous state without flashing new firmware and have to install all your apps from scratch.
You will be just where you were at the time the nandroid was made.
Titanium backup to backup your apps and appdata. When installing new rom you can simply restore all your apps and appdata without downloading everything again. Do not restore systemdata. It often leads to alot of trouble.
Just make sure you save all your backups on your external sd, so it won't get wiped by mistake.
Busybox is needed if you want more than just root so go ahead and install.

tys0n said:
With cwm or any other custom recovery you will be able to install zip files with mods, tweaks, roms, and so on. Simply put, non-samsung-signed-things + other functions as well.
You wont find many custom roms for s3mini yet wich it to be flashed through cwm. For now i think theres only BenzRom but I guess more will come
Nandroid or Titanium ? BOTH!
Nandroid for restore if something goes really bad, and remember to make sure you have a backup before you apply changes or mods. If you dont like it you can easily go back to previous state without flashing new firmware and have to install all your apps from scratch.
You will be just where you were at the time the nandroid was made.
Titanium backup to backup your apps and appdata. When installing new rom you can simply restore all your apps and appdata without downloading everything again. Do not restore systemdata. It often leads to alot of trouble.
Just make sure you save all your backups on your external sd, so it won't get wiped by mistake.
Busybox is needed if you want more than just root so go ahead and install.
Click to expand...
Click to collapse
Last couple of questions for now (apologies ) ;
1)Do I need Kies to connect my phone to PC btw, cuz I read something about USB debugging mode to be turned on and ADB...
2)There are two recovery images on the official site of CWM, do we need to choose the normal one or the touch and what about the ROMS, do I need to install those seperately ?
3)So every time we flash another ROM it has a chance to brick or are we safe if we made a backup beforehand ?
4)What format should I format my card to ? - FAT32, NTFS, ext4 or ...?
5)Does data wipe erase all data on phone or phone and sd card ?
6)Given both CWM and Odin flash what would be more recommended ?

Mystique03 said:
Last couple of questions for now (apologies ) ;
1)Do I need Kies to connect my phone to PC btw, cuz I read something about USB debugging mode to be turned on and ADB...
2)There are two recovery images on the official site of CWM, do we need to choose the normal one or the touch and what about the ROMS, do I need to install those seperately ?
3)So every time we flash another ROM it has a chance to brick or are we safe if we made a backup beforehand ?
4)What format should I format my card to ? - FAT32, NTFS, ext4 or ...?
5)Does data wipe erase all data on phone or phone and sd card ?
6)Given both CWM and Odin flash what would be more recommended ?
Click to expand...
Click to collapse
No worries. Better be safe than sorry
1. No, you dont need keis unless you want to look for official updates.
For filetransfer I use Airdroid or box/dropdox/4shared. Official updates will be available to download anyway
Adb (Android Debug Bridge) is just a terminal. I won't go in to details here but you will find lots of threads on how to install and use it if you search xda.
2. They both do the same thing, but in touch-version you make your choices on touch screen while the other one is managed with phones physical buttons. I prefer the latest.
Roms for cwm are packed as .zip & are downloaded separately. As I said before there isn't much to chose from for our device yet.
3. Everything done after root is a risk. Even root can be dangerous if it's not done right.
Usually if something goes wrong it will just lead to a softbrick wich can be fixed in download mode or recovery.
Once rooted, make sure you do that cwm-backup to keep on your external sd. It's also a good idea to keep an odin flashable firmware on your computer, just to be sure.
4. Go for fat32. It can be changed later if you want to explore link2sd, sd-swap etc..
5. Factory reset will wipe all internal, but not your external sd.
6. cwm makes it possible to flash custom roms while odin can't. You need odin to flash official samsung firmware, but cwm to flash custom roms, mods, and so on. Can't really compare those two with each other, as they are used for different things.
:good:

Dated, but still very relevant.

tys0n said:
No worries. Better be safe than sorry
1. No, you dont need keis unless you want to look for official updates.
For filetransfer I use Airdroid or box/dropdox/4shared. Official updates will be available to download anyway
Adb (Android Debug Bridge) is just a terminal. I won't go in to details here but you will find lots of threads on how to install and use it if you search xda.
Click to expand...
Click to collapse
What should I do for wired transfers only, I mean.
Do I need to search for the phone specific driver for pc at Official Samsung site or is there no driver ?
Any other things I need to turn on except USB debugging mode when wired ?
Edit: Nvm, just got on the right track again

CWM Recovery Won't Install

I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?

synthecypher said:
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje

JJEgan said:
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
Click to expand...
Click to collapse
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1

synthecypher said:
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
Click to expand...
Click to collapse
All depends upon the package but most CWM are root and recovery .
TRYhttp://forum.xda-developers.com/showthread.php?t=2002953

Ended up using Auto-Root which seemed to work no problem.

synthecypher said:
Ended up using Auto-Root which seemed to work no problem.
Click to expand...
Click to collapse
I initially had a rooted stock ROM that i was using for ages then upgraded to a custome ROM but for personal reasons decided to go back to stock.
Loaded stock ROM with intention of rooting only to get rid of bloatware, but not one of the ODIN Flash recoveries work at all, not one, so like you ended up using CF Auto and that worked but now im still stuck with Stock Recovery. I dont understand why none of the recoveries flash when they did before.
Cheers

trouble with cwm/ twrp
Hi all. Yes I'm a noob and I wouldn't ask If hadn't tried a plethora of ways to install either cwm or twrp.
It took me a good hour to find this thread so hope I'm in the right place.
Ok I used odin to root and cwm didn't stick so still on stock rec. However I used framaroot to get super su working and titanium says I'm all rooted up. Other apps only for root also work.
I've since tried using goo manager and Rom manager to install cwm or twrp and both say unsupported.
I've searched these here threads and found a few with same problem namely when using odin cwm wont stick and android reinstalls stock recovery.
So I'm a bit stuck, I'm rooted but have no cwm or twrp.
Any help would he much appreciated.

Try Philz recovery .

I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305

thanks !
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
Click to expand...
Click to collapse
Thats exactly how I understood the cwm not sticking problem. I have tried rom manager and said not compatable with my device as did goo manager for twrp. I think odin is the only way I get it to stick. So il flash in odin and il try to get into cwm as it boots and wipe those two files you mentioned.
But then can I just boot up as normal ? or will android try to reflash its stock rom ? Damn my phone for being so difficult
I only ask because I haven't decided what CR to use yet (or even looked for any). I was gonna get it all ready first then learn how to install a CR - 1 thing at a time i thought.
Anyway thanks for your help :good:
JJEgan I found Philz thread to be helpful but something I feel Im just not ready for. Im new to this and although the updated cwm looked cool there were just to much going on, maybe for a later day.
Thanks all the same :good:

wiping data plus cache plus dalvick cache is done to prepare your phone for the custom rom that you are going to flash. the wiping is to clean those partitions because if they are not erased you will have problems. especially if you go from one android version to another or touchwiz to aosp. it is done so you get a clean install with minimal issues. if it is not done you will most likely bootloop. effectively it is a factory reset. all of your apps and app data will be gone so you do not want to do that unless you have backed up your apps . however sometimes google automatically installs them after you sign in.
I am not sure why clockwork mod does not stick but if you copy the rom you want to your phone install clockworkmod with odin and then use clockwork mod to flas the rom and gapps package then factory reset you will not have the stock recovery anymore. but this has to be done without booting into android stock . PLEASE FOLLOW THE FLASHING INSTRUCTIONS TO THE BEST OF YOUR ABILITY. AND UNDERSTAND ANYTIME YOU FLASH OR MODIFY YOUR PHONE YOU VOID YOUR WARRANTY AND POSSIBLY CAN CAUSE IRREPARABLE DAMAGE. BEST OF LUCK!
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
Also philz recovery is highly recommended
HERE IS SOME VERY GOOD READING http://forum.xda-developers.com/showthread.php?t=2362743&highlight=philz+recovery http://forum.xda-developers.com/showthread.php?t=2344125

think I got it lol
Ok that's sounds good. However I've just read the threads you linked and now I've got to back up my imei and NV files first or il loose them when flashing. The procedure is all there and seems doable for a noob but i read some peeps are having trouble just doing that. I really wanted to root/install a CR regardless of the troubles cos I want full access and more importantly want to learn all the ins and outs so I can get the best use from my phone so glad I found this forum cause I'm sure I would have bricked my phone otherwise.
Might I ask if I've got this right tho?
1: backup imei/NV files
2: use odin to get cwm to stick using your method
3: boot into cwm to wipe data/dalvick cache and gapps
4:use cwm to flash a CR
5:factory reset
I think that's right?

CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS

i had the same Problem before.
I Just disassembled the battery after a full-wipe for few minutes and it works... i don't know y, but that was the only way... ?!

brilliant thanks!
ashraf sharif said:
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
Am I backing up to ext SD card?
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
Are these seperate zips?
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
Click to expand...
Click to collapse
Thank-you for all that,I really appreciate it.
Can I ask the difference between the apps nandroid manager and titanium? I've backed up with both and wondered if i really needed to? The nandroid backup was nearly 3gb!
Also I was gona backup with qpst for imei and NV files but then read its only for US versions? Will the backup of efs folder include those?

honestly i really dont know what the differences are. l do not use custom recoveries or custom roms. i dont use titanium backup .Any rom I flash i get from sammobile.com. one reason i do not use custom roms is that none can support mhl. I use a monitor and bluetooth mouse and keyboard . without mhl I cant mirror my screen so i always stay with stock roms. i use Xposed framework for modifications.

ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone......
Click to expand...
Click to collapse
thx you so much. this was the secound s3 that had this issue. deactivating auto reboot did the job!!!!

[Q] Trying to unflash ROM - very overwhelmed!

Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.

YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
That firmware is a zipped odin-file. Can't be flashed in CWM.
Make a cwm nandroid backup of your "/data" to your external sd (that's your installed apps)
You can also backup your apps and appdata using titanium backup or similar, for later restore.
Just remember to never backup/restore systemapps.
Backup internal sd to computer just to be sure, if you in any situation have to make a factory reset. Make sure any kind of backup is on your external sd before you make factory reset, or it will be lost forever

YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
Backup your data in CWM, flash my ROM and restore your data with CWM.

Benzonat0r said:
Backup your data in CWM, flash my ROM and restore your data with CWM.
Click to expand...
Click to collapse
CWM has NO choice to backup/restore only parts of the device. Only a full backup is possible.
This is only in TWRP. Pity! I only use CWM because TWRP makes corrupted backups (three times) for me.
Or is it possible to pick out only DATA from the backup? And what is happen with the dalvik cache, which
consists of the byte-code for all installed apps, optimized for the ROM which created it?
"advanced restore and restore only /data". Is this the way in CWM that you mean @benz?
JackoMJ

Yes that's exactly what I meant, "advanced restore and restore only /data"
You don't have to worry about cache and dalvik because it's automatically created on the initial start.

thx for the information Benz (usefull in the future perhaps),
but i´ve decided to use Titanium Backup.
JackoMJ

[Q] i9305: Encrypted + no recovery access + boot freeze

Hello!
Device: i9305
ROM: sentinel v5.0
Recovery: TRWP 2.6.3.0
Timeline:
1.ROM flashed and everything working fine
2.Phone encrypted using Settings->Security->Encrypt and Exchange email account installed. (battery drain became very high)
3.Boot to recovery but TWRP not able to mount /data (says "password failed" even though it is the right pass.. I performed many system reboots and every time the phone decrypted and booted). Only recovery not doing it.
4. attempted full wipe, format data, etc.. but it always failed
5. attempted Restoring previous nandroid (made before encryption with TRWP of ROM Rremix 4.07). It seemed to work
Current Problem:
1. On boot phone asks for password to decrypt (the decrypting little green android image shows up) but it then freezes during ROM boot
2. Cannot access recovery (HOME+VOLUME UP+POWER)
EDIT 3. I can access download mode and connect to PC and Odin recognizes it
Question:
How can I simply format the internal memory to then re-flash a recovery and ROM?
Or any other suggestions on how to get the phone to work again?
Thank you for your help!
cheers

progress report
Hello!
I got the correct stock ROM for my phone from SamMobile (I9305XXBMD4) and Odin flashed it (PDA option).
Odin said PASS.
However, during boot it still asks for encryption password (and the right password is not accepted). Recovery is also still not accessible.
So, I need a away to get ODIN to really format the internal SD or similar to actually remove the encryption. So, here comes the question: will Re-partition do it (correct PIT file needed and instructions)? And I know using it is half-way towards a completely bricked phone... so I accept suggestions (flash count is not 1 so no warranty service options yet...)!!
thank you!
cheers

If you mess with partition or Pit you are likely to brick your phone with no warranty .
Its not just the rom counter that voids warranty .
Flashing Philz Recovery via Odin may allow you to format all .

It Worked!!!!
JJEgan said:
If you mess with partition or Pit you are likely to brick your phone with no warranty .
Its not just the rom counter that voids warranty .
Flashing Philz Recovery via Odin may allow you to format all .
Click to expand...
Click to collapse
Thanks for the idea JJEgan.
I did install the Philz recovery via Odin and was able to select "Mounts ans Storage"-> "format /data and /data/media". This one worked with no errors.
Tried "Wipe Data/factory" reset and it also worked (no errors on not being able to mount /data)!
Then Odin Flashed Stock ROM (taken from SamMobile), reboot and it again asked for password! Removed battery and this time I could access the stock recovery.
Did wipe data/ factory reset + wipe cache.
Reboot and it works!
Now I just need to Root and enjoy the phone again!
Thank you all for the help!

If you have encrypted the phone with stock based ROM, you can also decrypt it. TWRP is not able to mount partition encrypted with Samsung's proprietary way of doing it.
If you have encrypted the phone with AOSP based ROM, and TWRP is not able to mount it, then something went wrong.
Sent from my GT-I9305 using Tapatalk

!crazy said:
If you have encrypted the phone with stock based ROM, you can also decrypt it. TWRP is not able to mount partition encrypted with Samsung's proprietary way of doing it.
If you have encrypted the phone with AOSP based ROM, and TWRP is not able to mount it, then something went wrong.
Sent from my GT-I9305 using Tapatalk
Click to expand...
Click to collapse
@!crazy: I encrypted while using AOSP Sentinel v5 ROM (see OP). ROM wise the phone seemed to be ok but TRWP recovery simply could not mount /data. Indeed, something went wrong.
In any case I went back to a stock based ROM to have full encrypt/decrypt compatibility because of Exchange email accounts I need to use.