Any idea if screen protectors for the original Z tablet are going to fit on the Z2?
Go with Tempered Glass Protector!
adambig said:
Any idea if screen protectors for the original Z tablet are going to fit on the Z2?
Click to expand...
Click to collapse
I personally bought this from ebay: H1 Ultra Thin Clear Tempered Glass Film Protector F Sony Xperia Z2 10.1" Tablet
I have put it on my z2 and it looks great and I have the extra protection.
I actually didnt think these tempered glass were really what they say they are, but this weekend, my phone, z1s fell and had a crack on the screen. I was so upset! :crying: But when I inspected it closer, I noticed the crack was on the tempered glass I have on it!!!! :victory: so it really did work and absorb the break. So that $10 glass saved me a bunch of money!!
So if you dont have one, think about getting one. Well worth the $15 you pay for.
adambig said:
Any idea if screen protectors for the original Z tablet are going to fit on the Z2?
Click to expand...
Click to collapse
screen protectors for Xperia Z tablet works on Xperia Z2 tablet, im using it on mine atm. it fits perfectly if youre still wondering .
anyone got any suggestions for matte ones?
I bought an ebay cheapie. It works re: anti glare and has actually really helped the fingerprint magnet factor / made the surface 'slide' better, but it has a weird polarising effect that's clearly visible as a sort of strange colour/pattern overlay, so on the fence about whether it was the right move or not...
On the first Sony Tablet S there was an official screen protector that had all the anti glare properties but didn't show a funny pattern, I'm looking for basically that effect.
I bought this tempered glass screen protector from eBay: http://www.ebay.com/itm/191544717348?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Not too expensive and it arrived very fast from Hong Kong (1 week) and in a crazy overdone packaging. It was inside a large foam box, so no chance of it breaking in shipping
It comes with a wet and dry wipe and installation is like every other glass screen protector. It was a bit tricky to get it on, since it's so large, but I managed on my 2nd try. I'm pretty happy with it, no bubbles and no weird colors. I was hoping it would bring less fingerprints, but it seems to be about the same as without. The screen touch seems to be better though somehow.
Also keep in mind that the hole on the protector isn't for the front facing camera, but for the ambient light sensor! At first I thought I had received the wrong item
I recently changed from my normal plastic screen protector for a 0.3 MM glass screen protector and love it! Looks way better than plastic ones, resists scratches much better and I can slide my finger over it much more easily. Would definitely recommend a glass protector. Buy one for your phone to try it first if you're unsure as they do cost quite a bit more, but for phones aren't much more expensive than cheap plastic ones.
Related
I've installed the in the box screen protector, it will do its job but its cut the same size as the shatter protector so was a nightmare to align without it going off one side but not the other. The application was the hardest of any I've ever applied as the shatter protector attracts dust like a magnet! The edges are already picking up dust so I'm on the lookout for a replacement.
I've got some Terrapin ones from Amazon...anyone tried these yet?
I've a feeling a wet apply protector would be best for this screen, as I'd expect them to be big enough to overlap the edges of the shatter protector.
Sent from my Nexus 7 using Tapatalk 2
LadFromWales85 said:
I've installed the in the box screen protector, it will do its job but its cut the same size as the shatter protector so was a nightmare to align without it going off one side but not the other. The application was the hardest of any I've ever applied as the shatter protector attracts dust like a magnet! The edges are already picking up dust so I'm on the lookout for a replacement.
I've got some Terrapin ones from Amazon...anyone tried these yet?
I've a feeling a wet apply protector would be best for this screen, as I'd expect them to be big enough to overlap the edges of the shatter protector.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I got a pack of these..
http://www.ebay.co.uk/itm/180983297773?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
they are a like a foil and very hard to apply indeed. Ended up with a lot of bubbles but was able to get rid of most of them, only with few where the dust particles settled.
It is very clear and leaves the screen smooth to use. Also they only have the cut for the front cam and does cover the sensor areas whereas the terrapin ones seem not to cover the sensors as well. Ordered a terrapin pack too off Ebay as a comparison.
The Terrapin ones I ordered from Amazon just arrived today (I bought the 10-in-1 pack) and they seem very good so far - the screen no longer attracts dust like a moth to a flame. It was a bit difficult to apply at first (it took me 3 attempts) but I finally got it nice and smooth with only a few bubbles around the edges where I think it lost it's stickiness due to me trying to peel it off again to reapply.
At the price of 10 for £3.49 I'm quite happy with these,
I have too installed the in box screen protector (above the anti shattering film) on my T
Now i am looking for a fingerprint-proof film
Sony japan sell various films (glossy, matte, fingerprint, privacy) but unfortunately it's for their "GX" (same as TX) model
Any one heard about this brand ?
http://www.bodyguardz.com/screengua...-skins-films.html?dir=asc&order=sort_priority
I am more interrested by the figerprint-proof part and wouldnt like the screen to become fuzzy because of the Antiglare
Doesn't the phone come with a factory screen protector? Mine looks like it has one. I received a screen protector with my Incipio case, but didn't put it on since it looked like mine had one already. Didn't know if that would affect the screen sensitivity.
I think the phone come with a preinstalled anti-shattering film. (but it's a little confusing since there is no mention to that in the manual or box)
It can act as a screen protector too, but you can put another one above if you want to keep it in mint condition.
I have absolutely no sensitivity problem with the factory film + protection film
crmb said:
I have too installed the in box screen protector (above the anti shattering film) on my T
Now i am looking for a fingerprint-proof film
Sony japan sell various films (glossy, matte, fingerprint, privacy) but unfortunately it's for their "GX" (same as TX) model
Any one heard about this brand ?
http://www.bodyguardz.com/screengua...-skins-films.html?dir=asc&order=sort_priority
I am more interrested by the figerprint-proof part and wouldnt like the screen to become fuzzy because of the Antiglare
Click to expand...
Click to collapse
drew1129 said:
Doesn't the phone come with a factory screen protector? Mine looks like it has one. I received a screen protector with my Incipio case, but didn't put it on since it looked like mine had one already. Didn't know if that would affect the screen sensitivity.
Click to expand...
Click to collapse
crmb said:
I think the phone come with a preinstalled anti-shattering film. (but it's a little confusing since there is no mention to that in the manual or box)
It can act as a screen protector too, but you can put another one above if you want to keep it in mint condition.
I have absolutely no sensitivity problem
Click to expand...
Click to collapse
Yes, all xperia phones (Correct me if i am wrong) come with a factory fitted protector. And the first thing you should do is take it off and dont bother with them
IMO the protctors get sctatched very easilly and atract dust, whist the bare screen is very durable and looks cleaner.
I dont use a case and keep my phone in my pocket with car keys, house keys and loose change. The screen never gets scratched. And I have done that on my x10, my neo and now my T.
Disclaimer, if you take the protector off and then drop a working diamond tipped drill onto it and it scratches the screen, thats not my fault
So you think the factory installed "supposedly shatter-proof film" is meant to be removed before use (if you didnt like it) ?
like on my xperia s e my tablet s , i took it off on my XT and is so smooth ... the glass feel is 100times better then the plastic and the screen is sharper .. the screen protector preinstalled is so thick...
gregbradley said:
I dont use a case and keep my phone in my pocket with car keys, house keys and loose change. The screen never gets scratched. And I have done that on my x10, my neo and now my T.
Click to expand...
Click to collapse
I'm glad you mentioned this. Has your Xperia T attracted particles underneath the camera or the gap between the display and corners while in your pocket? It may be too early to tell, but it seems all phones are prone with the issue.
gregbradley said:
Yes, all xperia phones (Correct me if i am wrong) come with a factory fitted protector. And the first thing you should do is take it off and dont bother with them
Click to expand...
Click to collapse
so the issue I have is the feel of the screen with the think layer on it (not the free protector in the box or the other you can buy and apply).
So I too would be tempted to peel, but who else has done this.
Glass would indeed feel better.
HI there. Just ordered my Z1S and I'm really excited. Unfortunately it is new, limited to one carrier, and designed slightly differently than the international equivalent. So that means it's hard to find accessories.
I'm wondering if there are any manufacturers I should look out for that might produce a product I could use to protect the glass on the front and back. From what I've seen they are in fact pretty shatter-proof, but seem to scratch very easily.
I've never been the type to ever put a case on my phone, personally I think they detract from the beauty of the device, but I've seen some Nillkin glass screen protectors that don't look too bad.
I bought the Nilkin tempered glass for my Z1. Will never use any screen protector but tempered glass from now on. Really happy with it.
Couldn't get the link but search for this on eBay.
Nillkin H+ 9H Hardness Premium Tempered Glass Front + Crystal Clear Back Protector Films for Sony Xperia Z1 L39h
Tapatalk
Tillsats said:
I bought the Nilkin tempered glass for my Z1. Will never use any screen protector but tempered glass from now on. Really happy with it.
Couldn't get the link but search for this on eBay.
Nillkin H+ 9H Hardness Premium Tempered Glass Front + Crystal Clear Back Protector Films for Sony Xperia Z1 L39h
Tapatalk
Click to expand...
Click to collapse
I already contacted the seller on ebay to see if they could source it for the Z1S. I don't see why not. That stuff all comes from factories in Shenzen and Shanghai... they can pump out stuff so fast. They have accessories made long before a device is announced.
My understanding is that the phone comes with the factory screen protector already installed
Sent from my LG-D801 using Tapatalk
amorek13 said:
My understanding is that the phone comes with the factory screen protector already installed
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
And in my experience when something is shatterproof it tends to scratch easily. Just like when something doesn't break it bends. There's always a tradeoff when you want lightweight protection.
There's some nasty scratch tests on youtube with the z1. Some drop tests too. Didn't shatter, but it didn't look pretty after.
If I can put an additional layer of strong glass on the front and back protect the nice stuff underneath... worth it.
POMF2K said:
And in my experience when something is shatterproof it tends to scratch easily. Just like when something doesn't break it bends. There's always a tradeoff when you want lightweight protection.
There's some nasty scratch tests on youtube with the z1. Some drop tests too. Didn't shatter, but it didn't look pretty after.
If I can put an additional layer of strong glass on the front and back protect the nice stuff underneath... worth it.
Click to expand...
Click to collapse
Did you ever find a good screen protector? I got a scratch on the factory one and want to remove it to replace it. At least I hope the scratch is only on the protector...
Thanks
Check out xtreme guard, they have both wet and dry install screen protectors for Z1s. I got both but used wet first.
So far, our Z1s doesn't have a reliable glass protector. I'm waiting for spigen to have one.
Sent from my SGP312 using Tapatalk
Can anyone suggest a cheap screen protector maybe you have bought from eBay? If it is possible share a link to where I can purchase it. Please share only products you have tried. I don't want to buy something I don't know well and haven't seen a review of it! Thanks...
I got these tempered glass ones. Two in the package for $6.95. Put one on the phone back in early June still going strong. Hi proper cutout for the proximity sensor and ffc.
https://www.amazon.com/Protector-Hardness-Protector-Anti-Scratch-Anti-Fingerprint/dp/B01C1TVYVQ
http://www.ebay.com/itm/281828808760
Two tempered glass protectors with proximity cutouts, $4. Feels just like a normal screen.
Installation was easy, carefully clean the screen of all dust and residue then align the tempered glass carefully. Bubbles will dissapear as you press on them, and it's no rush, I had bubbles a few hours after that dissapeared when I applied pressure.
Definitely inspires confidence that it will protect the screen from impacts?
This screen protector from Amazon works great! I personally have this one and it was a perfect fit and saved my phone from a face down drop on cement.
Nexus 5X Screen Protector, PLESON LG (Google) Nexus 5X Tempered Glass Screen Protector [2015], 99% Clarity, 0.2mm, 9H Hardness, Bubble Free, Glass Screen Protector for Nexus 5X https://www.amazon.com/dp/B016CUS84Q/ref=cm_sw_r_cp_apa_xbsaybJFK359X
I had a tempered glass from Nillkin at first. Someday I droped it and the tampered glass did its job fine protecting the screen but broke. Then I thought that tempered glasses may break easier than the screen and thus every few drops I loose 10usd for nonreason (the screen never broke without protector, but the protector broke quite easily). So I ordered some tempered glasses from Aliexpress priced just under a dollar. The first one was probably defective and started to get off on one corner. But after that I got it off and applied another. Its perfect now, it feels just like naked screen (same as Nillkin). It broke on face down drop but maybe the exensive one would brake too.
Probably the expensive ones are tougher but they cost 10 times up or more. Does it really worth it?
johnannis said:
Probably the expensive ones are tougher but they cost 10 times up or more. Does it really worth it?
Click to expand...
Click to collapse
If you drop your phone that much, quantity is probably more worth it for you than quality
Its not that, but i think that cheap ones do the job so why to pay for an branded one?
Had a Pleson that lasted for the whole 11 months or so I had my first 5X but got this instead when I got my replacement:
[2-PACK]-Mr Shield For LG (Google) Nexus 5X 2015 Newest [Tempered Glass] Screen Protector with Lifetime Replacement Warranty https://www.amazon.com/dp/B01D9EMSGC/ref=cm_sw_r_cp_apa_MuseybGAD64PK
It's cheap, comes with 2, and installation was easy and bubble free.
Sent from my Nexus 5X using Tapatalk
johnannis said:
I had a tempered glass from Nillkin at first. Someday I droped it and the tampered glass did its job fine protecting the screen but broke. Then I thought that tempered glasses may break easier than the screen and thus every few drops I loose 10usd for nonreason (the screen never broke without protector, but the protector broke quite easily). So I ordered some tempered glasses from Aliexpress priced just under a dollar. The first one was probably defective and started to get off on one corner. But after that I got it off and applied another. Its perfect now, it feels just like naked screen (same as Nillkin). It broke on face down drop but maybe the exensive one would brake too.
Probably the expensive ones are tougher but they cost 10 times up or more. Does it really worth it?
Click to expand...
Click to collapse
How the hell do you drop your phone so much? Maybe invest in a Nokia 3310? The hell is wrong with you?
Sinistersky said:
How the hell do you drop your phone so much? Maybe invest in a Nokia 3310? The hell is wrong with you?
Click to expand...
Click to collapse
Ok you said your joke, now are you feeling smart?
http://www.ebay.com/itm/361471555021 ....... $3 for a 2 pack....
I've been thinking of getting something to protect my precious and the original plastic one has lots of scratches on it.
so Tempered glass or Hydrogel film?
I've been doing research on this question too. It's like a mixed reviews. But a commonly seen answer is that they regret getting the hydro gel version and stick to the conventional tempered glass as some buyers indicated after a few days, the edge came off peeling and trapping dust while some others has high static attracting dust and easily scratch.
I usually prefer Tempered glass.
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Anyone found a tempered glass protector that actually does not lift on the sides? Such a pity if one uses a glass that doesn't cover the whole display.. =(
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Cccmachins said:
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Click to expand...
Click to collapse
What brand did you get and does it cover the whole screen?
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Pictures
Cccmachins said:
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Click to expand...
Click to collapse
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Jevansent said:
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Darktitor said:
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Click to expand...
Click to collapse
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Sent from my ALP-L29 using Tapatalk
jounin052 said:
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Click to expand...
Click to collapse
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
otonieru said:
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
Click to expand...
Click to collapse
Thanks... Wanted to see the one that @Cccmachins has because I ended up ordering the same Ozero TP... Guess I'll have to wait till I get it to see and decide if that works or if I need to keep looking.
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
tuffluck said:
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
Click to expand...
Click to collapse
That sucks... The tempered glass screen protector manufacturers seem to have a hard time making them fit perfectly on these curve edge phones... It's either to small or not sticking on the edges...
Jevansent said:
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Click to expand...
Click to collapse
Even the stock screen protector doesnt fully cover the edges. Is the nillkin tg the same or worse than the original SP in covering the side? Do you think the UAG plasma case is compatible with the nillkin tg?
i prefer this protector 9h tempered glass, it cover all the front, very clear also in sunlight, anti fingerprint. i buy it from local market, very satisfied
pictures
scrumptyous said:
What brand did you get and does it cover the whole screen?
Click to expand...
Click to collapse
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen bigger and bigger, resolution values are higher also. It is so necessary to get a high quality screen protector to protect the high valued smart phones. And the meanwhile, the screen protector cannot affect the touch sensitivity of phone screen , cannot decrease the brightness of the phone screen. So really it is not an easy solution.
Anyhow, we used to struggle which one is better? Tempered glass or hydrogel screen protector? Tempered glass is more thickness to 0.33mm, while hydrogel usually under 0.2mm, tempered glass cannot be full screen protector, while hydrogel can be full screen protector. Which is such a pity tempered glass cannot be full screen. Still except this flaw, other aspects is much much better than hydrogel protector. So we stick to tempered glass screen protector for Huawei Mate 10.
Here is what we prepare for our clients.
Flos®Huawei Mate 10 Transparent Full Protection Tempered Glass Screen Protector HD Anti-Scratch-[2 Pcs]
And we offer express shipping to Europe/USA within 1 week at 2usd shipping fees.
Also we are on Amazon for Europe.
Flosmall.com said:
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen..........
Click to expand...
Click to collapse
You know,
Sometimes its hard to trust a manufacturer, who despite promise the fine quality of their product, yet still manage to slip a typo on their commercial material,
Your images misspelled "tempered" as "temepred" and it doesn't sound convincing at all for me :silly:
So can someone suggest a good case for either the single or dual screen setup? Also I need screen protectors for the dual screen setup and Amazon didn't seem to have anything for the dual screen that were reasonable in price? Thanks in advance. [emoji846]
Matthew 6:31-34
New Living Translation
31*“So don’t worry about these things, saying, ‘What will we eat? What will we drink? What will we wear?’*32*These things dominate the thoughts of unbelievers, but your heavenly Father already knows all your needs.*33*Seek the Kingdom of God[a]*above all else, and live righteously, and he will give you everything you need.
34*“So don’t worry about tomorrow, for tomorrow will bring its own worries. Today’s trouble is enough for today.
Sent from my LG-H932 using Tapatalk
I'm using these matt protectors for each screen
https://www.ebay.co.uk/itm/153992405865
I have the LG V60 from T-mobile this is what I got from Supcase on amazon, it has a built in screen protector. No need for tempered glass with this case, in my opinion. These cases won't work with it anyway, the tempered glass is too thick.
https://www.amazon.com/dp/B088WMMJ78/ref=cm_sw_r_cp_apa_i_P-UfFbTVXHS9X
atvcache said:
I have the LG V60 from T-mobile this is what I got from Supcase on amazon, it has a built in screen protector. No need for tempered glass with this case, in my opinion. These cases won't work with it anyway, the tempered glass is too thick.
https://www.amazon.com/dp/B088WMMJ78/ref=cm_sw_r_cp_apa_i_P-UfFbTVXHS9X
Click to expand...
Click to collapse
You don't get the clicky sound from the gap between protector and phone screen? Last phone I tried that with was flat but that miniscule gap would make a "tap tap" sound, so I ripped off the built in. This was years ago tho, when I was still on Samsung before they ruined their screens
Supcase Unicorn with Zagg glass user here. No glass screen protector I have tried goes all the way to the edge of the screen.
Enough of a gap that the Supcase frame perfectly fits along the outside glass without overlap anywhere.
D-Max Armor glass is hot trash of a protector. Thinnest of the glass I've tried. Cracked in two days. LK glass didn't have good adhesive. Removed it because of the massive edge bubbles drove me crazy.
This Zagg glass works nice, but is not worth the price. This time I didnt even take the phone out of the Supcase to apply the glass.
pre4speed said:
You don't get the clicky sound from the gap between protector and phone screen? Last phone I tried that with was flat but that miniscule gap would make a "tap tap" sound, so I ripped off the built in. This was years ago tho, when I was still on Samsung before they ruined their screens
Click to expand...
Click to collapse
No clicking sound at all, it fits perfect! Sorry about the delayed response
Ghostek case with supershieldz screen protector. no problems. even after dropping it a few times getting in and out of my truck.