Screen goes black but still turned on... - Motorola Atrix HD

Hi all,
I've replaced my Atrix HD twice now under warranty for the same issue. This is my third Atrix HD. This last time, it was a few weeks out of warranty before it started up again, so AT&T would not replace it. Wonderful.
I love the Atrix HD, with the exception of the horrible squealing during video and audio recordings that I have yet to figure out, and the screen flaking out on me. I would have the phone for a few months completely without issue, then it would start acting up. The screen would turn off randomly, or so I thought at first. I've had this problem so much, I've worked out how to make it happen and to temporarily fix it.
If I sort of flex my phone back from the top left corner to the bottom right corner, the screen will stay on and work. However, if I flex it between the bottom left and top right corner, the screen goes off pretty much immediately, and since this issue has been exactly the same on the last 3 phones I've had, it makes me wonder if this is a manufacturer defect or something. The screen is black, but still reacts normally to touch (I can hear and feel the unlock screen, or if I pull up a piano app I can still play it, still shows when connected via HDMI, etc.
I'm pretty gentle with my phone, especially since the last two times I've had to replace it. I've never dropped it, even on carpet. I don't have a case or anything and I keep it in my pocket, but it stays in pristine condition. I don't even load a lot of apps on it.
I'm not sure what to do. It's obviously a hardware issue. I've opened it up and reseated the ribbon cables to no effect. I'm not really sure what else to check, but I had reservations about messing with the LCD/Digitizer too much. I don't want to break it and have no phone at all! Anyone else have this issue before? Any advice?
Thanks in advance,
greyspot
P.S. I'm in IT, so I'm comfortable taking things apart and troubleshooting. I've just done all I can think to do aside form replacing the LCD.

I mean you could try replacing the LCD and digitizer and see what happens. I'm not sure how much they cost but if you really like our HD then it's probably worth it. Sounds like it's "fool me twice, shame on me" and you should get a different phone. I've had zero issues with mine even after installing the EB40 battery and cleaning dust from behind the glass and on the lcd. Maybe you're just unlucky?
People freak out about fixing the hardware but it's no bug deal at all. It's like slightly more functional and expensive Lego's.
Sent from my ATRIX HD using Tapatalk

The last few replacements were free, not that I didn't want to try another phone. Maybe I'll try to replace the LCD, but at this point I might just buy another phone and move on. Frustrated. Anyone else encounter this issue before?

This seems to be the same problem I was having. In my post from the 30th.
http://forum.xda-developers.com/showthread.php?t=2736888
[Q] Display backlight inop sometimes
Sent from my ATRIX HD using XDA Free mobile app

Weird that a battery mod would fix it. I think it's because the battery is a bit bigger, and pushes on whatever it is that is loose in our phones just right. Oh well, I've already given up. I may try to fix it after I get my new phone and keep it as backup, but I went ahead and got an Optimus G on Swappa. I just found out about Swappa. Liking it very much! Still haven't gotten the Optimus yet, but I've had the Optimus V on Virgin, and it was a very solid phone.
Oh well, thanks for the help from those that replied. I've seen this issue pop up on different forums as well, so I believe it is a common problem with the Atrix HD.

Related

Weird display/screen problem, warranty case, or simply tough luck?

Hi, my sister's boyfriend is having a screenproblem with his TyTN2. Yesterday, he took it out of his pocket, turned it on, and the screen was more or less white, with one blueish "wave" over the screen. Everything else seems to work, he can use the phone, without seeing anything of course.
Now the weird thing: The phone wasn't dropped, there is really no sign of a hit or something. It's pretty the same as this user already described some time earlier inhere (click).
As it obviously seems, this is a TyTN2-problem, and not due to hitting/dropping the device, so, is there a hope to get this replaced on warranty? I hoped to find more threads on the subject "broken screen", especially one matching exactly this case, but until now, I only found the one cited above, beside many others of course about users who caused the broken screen themselves. Am I perhaps overseeing a thread treating this special case?
What possibilities does he have, besides buying a new device, or sending it in to HTC for repair?
I read something about a "ribbon cable" that could be "uncorrectly seated" (click), how probable is it, that this could be the case? And if probable, what cable is this exactly? I looked at one dismantling guide, but there are several "candidates" that could be loose?!
So, I'd be very grateful for every helpful advice, he's convinced he didn't harm his TyTN2, and I believe this, because he always carries it in a protecting Alu-case...
Thx in advance,
Eric
I've also once broken a screen without dropping/hitting the device, but just by it being too "compressed" in my pocket, which bent the screen enough to crack it.
Some screens that don't appear cracked can actually be broken too, but just in a location you don't see (the screen is a bit bigger than the viewing area and the exterior part is where the control chip is).
What I'd do is get a screen on ebay (can find some for about $80) and replace it. That's after disassembleing the device, checking the connections and making sure the LCD is dead.
Well im having the same problem since i got my at&t tilt for just a week. First it became white-ish after turning on out of the standby mode, after 3 times it became total white and didnt get better since then. I got a new lcd from ebay 3 days ago, tried it, same white screen. Now i ordered a new ribbon cable thats the cable that sends the lcd signals to the mainboard.
This is how it looks and where you can order it on ebay:
http://cgi.ebay.com/HTC-TYTN-II-2-P4550-Kaiser-LCD-ribbon-flex-cable_W0QQitemZ110267363535QQihZ001QQcategoryZ14418QQrdZ1QQssPageNameZWD2VQQcmdZViewItemQQ_trksidZp1638Q2em122
It also has the micro sd connection, and the speaker at the ear connection on it.
I expect this item coming this week. I will hope this will fix it.
ok please report the results here, I think I'm going to check that cable in first place too
I sure will report the results.
better of selling it
i had the same problem... i found it easier and more convenient to sell the damaged phone on ebay ($250) and buy a new one from ebay as well ($400). basically, i fixed my screen for $150. think about it
phusio said:
Well im having the same problem since i got my at&t tilt for just a week. First it became white-ish after turning on out of the standby mode, after 3 times it became total white and didnt get better since then. I got a new lcd from ebay 3 days ago, tried it, same white screen. Now i ordered a new ribbon cable thats the cable that sends the lcd signals to the mainboard.
This is how it looks and where you can order it on ebay:
http://cgi.ebay.com/HTC-TYTN-II-2-P4550-Kaiser-LCD-ribbon-flex-cable_W0QQitemZ110267363535QQihZ001QQcategoryZ14418QQrdZ1QQssPageNameZWD2VQQcmdZViewItemQQ_trksidZp1638Q2em122
It also has the micro sd connection, and the speaker at the ear connection on it.
I expect this item coming this week. I will hope this will fix it.
Click to expand...
Click to collapse
As im typing now, the htc tytn2 works again. My problem was the flex cable. Got the new one installed and lcd works again. But take a look to this thread, theres a guy that has also the problem and said just a other lcd worked.
The thread: http://forum.xda-developers.com/showthread.php?t=352486

Does your Diamond feature Newton's rings?

I am currently really interested in a Diamond, however the thread Oily liquid underneath screen - from nowhere kinda make me reconsidering it. Because of that I contacted HTC and received a surprisingly quick reply, stating that nearly every device sent in had a physical damage
Dear Sir, I can confirm that this fault is normally caused by physical damage to the device. Nearly every single device we have repaired with this fault has had some form of physical damage that has led to the fault. Of course the few that haven't were repaired under warranty. I quote directly from our repair centre: This issue is caused by air/liquid entering the LCD layer, and is nearly always OOW (Out Of Warranty) as it can only be caused by excess pressure on the screen. As long as you look after the device, and take care of it, this issue is unlikely to affect you. We have numerous Touch Dimonds here in our support centre, around 3 or 4 for each language we support, and not one of them have displayed this issue.
Click to expand...
Click to collapse
Today I took a look at some models on display in several stores and except for one all showed the same effect described in this thread. However I have to admit that this might not be the perfect example for a comparison as those poor phones probably not get treated extremely well in stores.
So I hope to find out with this poll how many people really have got this issue, respectively how many of them can explain it with too much pressure.
Thanks everyone.
I had exactly the same problem. Just went back to T-Mobile Netherlands, and they admitted directly that this is a common issue. They repaired it under warranty conditions at no fee at all. They just replaced the entire screen and luckily I've never faced the problem again.
Also, when the oilish liquid was there, the screen alignment was always a little outlined, and when you tap the slylus on that spot you can hear a strange hard "click".
Thanks to all voters, so far all voted to have no problems, except for one, I suppose peponline.
More opinions/votes appreciated.
I've got it on my 7 month old diamond - screen works ok, but tapping it isn't soft like it used to be. Not a bad enough problem to send it back and be without a phone for a couple of weeks, or risk being charged for!
Thanks for your post Alpsp, did it happen for no reason or did you do touch the screen once too hard?
Those who voted the third option, are you definitely sure it couldnt have come from too much pressure - maybe unnoticed in the pockets?
More comments/votes appreciated.
Hi Lutent, I can honestly say I don't believe I've put any abnormal amount of pressure on the screen - I'm pretty careful with the phone, it doesn't have a single scratch on it yet.
What is strange though, is that I've just tried to take a photo of the liquid for you, but it has completely disapppeared!
The only reason I can think of for this is that it hasn't been in my pocket all morning so will be cooler than usual. Also it doesn't show up so much in daylight - I'll have a look later tonight and see if I can photograph it
Hi all
I have the same issue. mine covers 50 % of the screen.
Whats funny is that its exactly right smack in the middle of the screen
its like a zoom box of the screen.
It appeared suddenly and all my touch screen alignments runs as well.
didnt have time to send for warranty until recently.
have sent it in now currently waiting for repairs to complete.
so far no news about if its OOW
smudge
Had this problem for some short time, the touchscreen has become hard to handle, as it's not very precise in the area of the "liquid spot", covering 1/9 of the center of the screen. Have no clue of where it came from.
Just sent an mail to the store, demanding replacement refering to this as a common problem after doing some reseach at different forums online.
Waiting for reply. Will notify the results.
Same problem with my HTC Fuze. It looked perfect. Never dropped. Made call. Looked good. Pulled it out 5 minutes later...the square was there. (I had just flown from Atlanta to LAX...I wonder if atmosphere had anything to do with it???)
Definitly a defect in design.
PS...The letter they sent is BS. It's not the LCD but the touchscreen. The touchscreen is touching the LCD...in my case anyway.
You will probably also notice a slight curvature of the touchscreen down toward the LCD if you look closely.
The reason they don't want to repair them is because this is the most time consuming repair. The phone has to be completely disassembled to attach the cable.
I am really pissed. i had liquid under the display just two days after I bought it.
I am super careful with all my electronic devices and not once did I have to send in any device to get it repaired.
the D2 was also always in the leather pouch.
For some reason, initially the oily liquid disappeared and I could keep on using it, however not it is there permanently and when I called the warranty place, they said that most likely I will have to pay for the repair as displays are not covered by warranty.
I am really pissed and would recommend buying a different phone. Sooner or late I bet everyone will have this problem. It happened to me after just two days, I can not imagine it to last 2 years or so...
Sigh... same issue here. I just bought a TP from a good friend of mine who is exceptionally carefull with his phones and I've just noticed a big part of the screen (1/4) being full with the Newton Rings.

[Q] Screen cracked, touch not responding properly.

Hey everyone.
A few months ago I dropped my phone for the first time. It turned out that the screen had gotten a large crack down through the middle, running all the way from the top to the bottom. I tried using it, and the touch capabilities didn't seem to be affected, so basically it was just cosmetic at first.
But this afternoon, after having used it lightly since morning without issues, the phone suddenly started responding weird to touch. Whenever I touch the screen, it registers touches all over the screen, and I'm not even able to dial in my pin code after rebooting.
Does anyone have an idea what might have happened, what is broken, and how much it will set me back to fix it?
BTW, the phone arrived with a red pixel, I noticed it once when booting up, but thought it was just a bug or something. Later I found out that is actually a fault with the phone, and most companies have dead pixel policies, I'm wondering, is it possible to return the phone for a new because of the red pixel?
Thank you for your time.
I think it will be a little hard to prove that dead pixel after being cracked. If you have some skills, you can change it yourself, its not very hard and you can find the screen on the internet.
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
I think it will be a little hard to prove that dead pixel after being cracked. If you have some skills, you can change it yourself, its not very hard and you can find the screen on the internet.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
That does sound good, but aren't the glass (The outermost layer) and the touchscreen two different things entirely?
Thank you.
Well what do you know, it started working again! Well, atleast for now.
Thanks for the advice
SB93 said:
Does anyone have an idea what might have happened, what is broken,
Click to expand...
Click to collapse
...I'm going to go out on a limb here and say it's the huge crack down the middle of the screen? :good:
Seriously, though.. capacitive touch-screens measure changes in the resistance across a thin layer on top of the glass. So if you bend it somehow, or damage it (say, stretch it because the glass underneath cracks), then the resistance won't be picked up, or it will be registered inaccurately. So it might work for a while, or work reasonably well. Know a guy who smashed his iPhone.. sat on it, actually.. and it worked with "cracked" glass (that was held together by the layer on top of the glass, right) until he bought another iPhone. *shrug* He talked about it a lot, but it didn't seem to really make a difference on the actual phone.

[Q] Quick question about repairing my Atrix HD?

A few months ago I bought a broken Atrix HD from a friend of mine for $30 and I've finally decided I'd get around to fixing it. The reason he sold it to me so cheap is because he was in a car wreck and he said that when the air bag deployed it hit the phone which was in his hands at the time. It completely shattered the Digitizer and LCD panel. Earlier today I opened it up and disposed of the 2 broken parts. Upon looking the insides over several times, everything appears to be in its rightful place and nothing seems to be broken. However, when I started looking into parts to repair it my brother informed me that he thinks I'm taking a huge risk because for all I know it could have other internal problems from being hit by the air bag. So, I'd just like someone else's input on the situation. Am I really taking a huge risk if I buy the new Digitizer and LCD? Should I be worried about other possible internal problems that can't be found without a screen on the device? Or do you think that the insides of the device were protected well enough to be unaffected?
I would be wary because this little bugger is pretty tuff and it must have been a really good hit to break it.
RCon227 said:
A few months ago I bought a broken Atrix HD from a friend of mine for $30 and I've finally decided I'd get around to fixing it. The reason he sold it to me so cheap is because he was in a car wreck and he said that when the air bag deployed it hit the phone which was in his hands at the time. It completely shattered the Digitizer and LCD panel. Earlier today I opened it up and disposed of the 2 broken parts. Upon looking the insides over several times, everything appears to be in its rightful place and nothing seems to be broken. However, when I started looking into parts to repair it my brother informed me that he thinks I'm taking a huge risk because for all I know it could have other internal problems from being hit by the air bag. So, I'd just like someone else's input on the situation. Am I really taking a huge risk if I buy the new Digitizer and LCD? Should I be worried about other possible internal problems that can't be found without a screen on the device? Or do you think that the insides of the device were protected well enough to be unaffected?
Click to expand...
Click to collapse
Atrix HD is really good in its quality... Only the digitizer and LCD are fragile... So chance of internal damage is very very less.. I myself have broken it twice... Even on falling down from car, only these two broke.. Others were fine. .
Sent from my Atrix HD using xda app-developers app
frog1982 said:
I would be wary because this little bugger is pretty tuff and it must have been a really good hit to break it.
Click to expand...
Click to collapse
From my experience with my first Atrix HD I have to agree that it's an extremely sturdy device. But considering that the digitizer was made from the 1st Gen of Gorilla Glass I feel like it couldn't be too difficult to break. I've seen plenty of people break their phones from minor drops or just sitting the wrong way with it in their pockets. Maybe its different when it comes to the Atrix HD though. I haven't heard too many stories about people breaking their screens on the Atrix HD.
Aingaran said:
Atrix HD is really good in its quality... Only the digitizer and LCD are fragile... So chance of internal damage is very very less.. I myself have broken it twice... Even on falling down from car, only these two broke.. Others were fine. .
Sent from my Atrix HD using xda app-developers app
Click to expand...
Click to collapse
I'm really hoping that's the case. When I had my old Atrix HD I found myself accidentally dropping it alot and I even dropped it on my brothers phone one time and the only part I ever had break was the vibration motor. I guess I have about a 50/50 chance. Without replacing the Digitizer and LCD I'll never know whether it has any other problems or not. I suppose that it'd make more sense to do it now while I have the money to do so rather than wait around.
EDIT: I received all the parts I ordered in the mail today and put the phone together and it seems to be working flawlessly. The only thing that doesn't seem right is how much my Wi-Fi cuts off but I doubt that has anything to do with damage suffered from the screen being broken. Even so, I still think that the $140 I put into this phone was well worth it.
RCon227 said:
A few months ago I bought a broken Atrix HD from a friend of mine for $30 and I've finally decided I'd get around to fixing it. The reason he sold it to me so cheap is because he was in a car wreck and he said that when the air bag deployed it hit the phone which was in his hands at the time. It completely shattered the Digitizer and LCD panel. Earlier today I opened it up and disposed of the 2 broken parts. Upon looking the insides over several times, everything appears to be in its rightful place and nothing seems to be broken. However, when I started looking into parts to repair it my brother informed me that he thinks I'm taking a huge risk because for all I know it could have other internal problems from being hit by the air bag. So, I'd just like someone else's input on the situation. Am I really taking a huge risk if I buy the new Digitizer and LCD? Should I be worried about other possible internal problems that can't be found without a screen on the device? Or do you think that the insides of the device were protected well enough to be unaffected?
Click to expand...
Click to collapse
I wouldn't do it an airbag puts out a lot of force
Sent from my MB886 using xda app-developers app

anyone experience popping noise when pressing note 9 screen?

Hey!
Got a Note 9 last week and day after receiving it i noticed when holding the note 9 and pressing on screen in certain areas (near sides/corners/centre) it would make a popping noise, sounds like adhesive behind the screen not adhering properly or something like that. I got Samsung to replace with a brand new one and same thing with this one, it happens whether phone is on or off, it's definitely not rite as you can hear it very clearly, feels like some flex going on in screen when it happens as i can feel the screen kind of dip slightly when it makes the noise, but ok when it does not make the noise.
Curious to see if anyone else have had the same issue? gutted as loved it for the short while i had it but sending second one back now for refund as worried something will happen with screen further down the road and Samsung may not cover it. I know of at least 3 others who had this issue when buying same time as me.
Cheers.
Do you have a tempered glass installed?
Sent from my ONEPLUS A6003 using Tapatalk
daniel4653 said:
Do you have a tempered glass installed?
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
sorry should have said, no tempered glass or any screen protector applied.
have no problem with that.
only have that popping sound when using tempered glass before. changed to plastic screen protector and no sound anymore
ah ok thanks for replying, must have just been very unlucky. Cheers.
MatTechGuy said:
Hey!
Got a Note 9 last week and day after receiving it i noticed when holding the note 9 and pressing on screen in certain areas (near sides/corners/centre) it would make a popping noise, sounds like adhesive behind the screen not adhering properly or something like that. I got Samsung to replace with a brand new one and same thing with this one, it happens whether phone is on or off, it's definitely not rite as you can hear it very clearly, feels like some flex going on in screen when it happens as i can feel the screen kind of dip slightly when it makes the noise, but ok when it does not make the noise.
Curious to see if anyone else have had the same issue? gutted as loved it for the short while i had it but sending second one back now for refund as worried something will happen with screen further down the road and Samsung may not cover it. I know of at least 3 others who had this issue when buying same time as me.
Cheers.
Click to expand...
Click to collapse
Hey thanks for sharing that. This is the first link I got searching for this, I have it happen to mine note 9 too. It's such a bummer since I had it for only three days and will have to setup a new one from scratch if they have to replace it.
are you sure the s-pen isnt vibrating when you tap it on that side? remove the s-pen and tap it. i bet it goes away
Wow. No issues like that. I've had three Note 9s and all three have been perfect. I'd definitely return for a replacement. Weak or loose glue could seriously affect the water resistance, since it depends on a water tight seal between the screen and the frame. I'd never recommend using your phone in water anyway, but I at least like the assurance that if my phone takes an accidental dip. There's a good chance it will survive.
MeggaMortY said:
Hey thanks for sharing that. This is the first link I got searching for this, I have it happen to mine note 9 too. It's such a bummer since I had it for only three days and will have to setup a new one from scratch if they have to replace it.
Click to expand...
Click to collapse
Yep real shame, my replacement was the same to, it's on way back, getting a refund, not worth risking something going wrong with the screen later down the road, i mean manufacturers do anything to not accept responsibility specially when it comes to screens. First one started on second day, it was great for the first day, replacement was doing it from the moment i took it out of packaging and holding it, it was worse than the first one.
t3project said:
are you sure the s-pen isnt vibrating when you tap it on that side? remove the s-pen and tap it. i bet it goes away
Click to expand...
Click to collapse
It happened to me when turned off with no s-pen in, no screen protector, no case.
Mr. Orange 645 said:
Wow. No issues like that. I've had three Note 9s and all three have been perfect. I'd definitely return for a replacement. Weak or loose glue could seriously affect the water resistance, since it depends on a water tight seal between the screen and the frame. I'd never recommend using your phone in water anyway, but I at least like the assurance that if my phone takes an accidental dip. There's a good chance it will survive.
Click to expand...
Click to collapse
agreed.
After studying the noise a bit more, it is definitely an issue with the glue. It will not happen all the time I press the screen, but it happens more often when the phone is a bit warm to the touch (e.g. charging the battery). Also, it appears to be along the side where the battery resides - I wouldn't worry about the battery itself, it just makes sense that the glue will get loose where it heats up more often (in my case, I don't stress the phone all that often for the other side where the SoC is to play a role). Anyways I'll be returning it tomorrow once the shops here in Berlin open 'cause now it's christmas break.
One extra thing that might be interesting, the back-side also has some sort of a glass-separation issue, at least it looks like that. Notice the circular smudge around and right of the DUOS label - I tried cleaning it but it comes back, I think the glass is separated at that point too, but just a tiny bit. I've had the phone for four days and haven't dropped/hit/scratched it AFAIK.
https://photos.app.goo.gl/aeUcpLDau2Ypz6Go9
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
MatTechGuy said:
Yep real shame, my replacement was the same to, it's on way back, getting a refund, not worth risking something going wrong with the screen later down the road, i mean manufacturers do anything to not accept responsibility specially when it comes to screens. First one started on second day, it was great for the first day, replacement was doing it from the moment i took it out of packaging and holding it, it was worse than the first one.
It happened to me when turned off with no s-pen in, no screen protector, no case.
agreed.
Click to expand...
Click to collapse
I'm hoping to get a better one after a refund, mind sharing if you happen to live in Germany as well? I'm wondering if it's a bad batch or something.
MeggaMortY said:
After studying the noise a bit more, it is definitely an issue with the glue. It will not happen all the time I press the screen, but it happens more often when the phone is a bit warm to the touch (e.g. charging the battery). Also, it appears to be along the side where the battery resides - I wouldn't worry about the battery itself, it just makes sense that the glue will get loose where it heats up more often (in my case, I don't stress the phone all that often for the other side where the SoC is to play a role). Anyways I'll be returning it tomorrow once the shops here in Berlin open 'cause now it's christmas break.
One extra thing that might be interesting, the back-side also has some sort of a glass-separation issue, at least it looks like that. Notice the circular smudge around and right of the DUOS label - I tried cleaning it but it comes back, I think the glass is separated at that point too, but just a tiny bit. I've had the phone for four days and haven't dropped/hit/scratched it AFAIK.
https://photos.app.goo.gl/aeUcpLDau2Ypz6Go9
I'm hoping to get a better one after a refund, mind sharing if you happen to live in Germany as well? I'm wondering if it's a bad batch or something.
Click to expand...
Click to collapse
i agree with you, seems to be adhesive/glue issue, it did not happen all the time for me either but as you mention it, i noticed it more after recharging (when phone gets warm) so think you nailed the issue on the head to be honest.
I noticed it around the sides (edges) and the centre of screen, second one was even worse much more noticeable and was happening straight away after taking it out of box.
Something i noticed but never mentioned as wasn't sure but second one was the same, maybe it's normal but don't think it is, on the curved corners of the screen it appeared to me the screen looked slightly lifted not flush with the frame but only on corners.
I live in the UK btw. I was thinking a bad batch but seeing Samsung had a good deal on with cashback and discount i imagine they sold allot between the time i arranged to send mine back to getting the replacement which was a week so i imagine they would have been separate batches although i could be wrong.
MatTechGuy said:
i agree with you, seems to be adhesive/glue issue, it did not happen all the time for me either but as you mention it, i noticed it more after recharging (when phone gets warm) so think you nailed the issue on the head to be honest.
I noticed it around the sides (edges) and the centre of screen, second one was even worse much more noticeable and was happening straight away after taking it out of box.
Something i noticed but never mentioned as wasn't sure but second one was the same, maybe it's normal but don't think it is, on the curved corners of the screen it appeared to me the screen looked slightly lifted not flush with the frame but only on corners.
I live in the UK btw. I was thinking a bad batch but seeing Samsung had a good deal on with cashback and discount i imagine they sold allot between the time i arranged to send mine back to getting the replacement which was a week so i imagine they would have been separate batches although i could be wrong.
Click to expand...
Click to collapse
Cool, thanks for the info. It's too dark in the winter days so it's hard to say if the glass is a bit off on the corners, but nevertheless, I will write back when I (hopefully) get a replacement one.
One last thing - you did speak directly with Samsung support? Did you buy it from their store or you just didn't want to bother with the store you bought it from?
MeggaMortY said:
Cool, thanks for the info. It's too dark in the winter days so it's hard to say if the glass is a bit off on the corners, but nevertheless, I will write back when I (hopefully) get a replacement one.
One last thing - you did speak directly with Samsung support? Did you buy it from their store or you just didn't want to bother with the store you bought it from?
Click to expand...
Click to collapse
I bought it directly from the Samsung online uk store. There was a discount direct from Samsung for students/people who work in certain industries so it could be bought for £699 (£200 off), but also they were offering £150 cashback bringing total down to £549, plus cashback by going via a cashback website meant i would have had it for around £504, also they were doing trade in so people could get even more off up to another £150.00 bring cost down to £399, then people got the samsung game deal thingy, don't play games myself but people can get a Fornite theme by downloading Fornite playing 3 games then you get the free theme, kids going bonkers for the theme, people selling the theme upto £100. So people could have the phone at a bargain price.
So I got a replacement, and just as you said, the display had the same popping sound out of the box. It happens like once a day, but since there is really no substitute for this device right now (stylus + good DAC, besides all the other great features), I'll keep using it and if it gets worse contact Samsung down the line for warranty/replacement. Decided to leave this as information if some other person happens to have the same problem in the future.
MeggaMortY said:
So I got a replacement, and just as you said, the display had the same popping sound out of the box. It happens like once a day, but since there is really no substitute for this device right now (stylus + good DAC, besides all the other great features), I'll keep using it and if it gets worse contact Samsung down the line for warranty/replacement. Decided to leave this as information if some other person happens to have the same problem in the future.
Click to expand...
Click to collapse
feel for you, such a shame and disappointing to happen a second time, it's a great phone, i did not want to risk it so sent second one back too. Fingers crossed you won't have any issues. Mine was happening regularly so like you say just keep an eye on it.
I don't have that issue even with the tampered glass on my phone.
Sent from my SM-N960U using Tapatalk
i actually noticed it a few times.. like last night it was doimg it. sort of right above where the keyboard is in portrait mode..
it seems to happen when its really cold outside for me.. its not enough for me to have it replaced thankfuly
I can replicate this when I clean my screen with a microfibre cloth. It happens on pretty much all of the screen. I believe I can also see some light streaks in the screen when this happens. The popping sound happens regardless of the temperature of the phone. Will have to inspect it more to see if I can spot any other issues with the screen. I got mine in the UK just over a week ago. Apart from that I think the phone has been great so far. Not sure whether to replace it.
glad i sent mine back now to be honest, personally i would send back, as you say everything else is great apart from the screen popping sound. The worry for me is the screen might cause issues further down the road, screens are the biggest issue with mobile phones and manufacturers are quick to blame user and deny warranty.
elliwigy said:
i actually noticed it a few times.. like last night it was doimg it. sort of right above where the keyboard is in portrait mode..
it seems to happen when its really cold outside for me.. its not enough for me to have it replaced thankfuly
Click to expand...
Click to collapse
My Unlocked US Note 9 does it too. Mine mainly does it on the right side near the middle. It's not enough for me to warrant sending it back; it still works fine and I don't see any screen issues when pressing on the screen. Also I bought mine used so I'm guessing the screen was replaced. If it gets worse, I guess I'll fix it then.

Categories

Resources