I have a Samsung Exhibit t599n and installed Philz touch wiz and then pacman rom with the gapps. Now when I select reboot to the system it keeps returning to philz. I can get the phone to the download screen for odin. Anyone can help me get this phone up and running? Thanks
NaplesRabbit said:
I have a Samsung Exhibit t599n and installed Philz touch wiz and then pacman rom with the gapps. Now when I select reboot to the system it keeps returning to philz. I can get the phone to the download screen for odin. Anyone can help me get this phone up and running? Thanks
Click to expand...
Click to collapse
flash stock firmware via odin
Thanks. I was up early this morning and realized I was so frustrated and wasn't thinking clearly. It's up and running, but now time to figure out how to install pacman without killing my phone.
Sent from my SGH-T599N using XDA Free mobile app
NaplesRabbit said:
I have a Samsung Exhibit t599n and installed Philz touch wiz and then pacman rom with the gapps. Now when I select reboot to the system it keeps returning to philz. I can get the phone to the download screen for odin. Anyone can help me get this phone up and running? Thanks
Click to expand...
Click to collapse
Wrong forum. This forum is for the S3 mini, not the Exhibit T599N.
Related
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Wipe data and cache then reboot.
If not the try re-flasing the rom
If you still can't get it to boot then flash stock rom with odin(search xda for a guide)
Sent from the cracked screen of my GALAXY Ace.
As long as u see Samsung logo when it starts up I don't think its bricked. Can you still go into CWM?
Sent from my GT-S5830D using xda premium
atrotta said:
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Click to expand...
Click to collapse
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Flash the rom
Enjoy
[Q] Its ur ace 5830 ? Or its 5830 i/m?
Maybe thats the problem,check about phone and tell me
Sent from GALAXY Ace SGII v9~
Make sure it's S5830 not s5830i
Sent from my GT-S5830 using xda app-developers app
atrotta said:
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Click to expand...
Click to collapse
Blackstard said:
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Flash the rom
Enjoy
[Q] Its ur ace 5830 ? Or its 5830 i/m?
Maybe thats the problem,check about phone and tell me
Sent from GALAXY Ace SGII v9~
Click to expand...
Click to collapse
None of them. Its 5830B. I've already attempted to wipe cache/dalvik cache before posting my request of help . Anyway I will try it again. Thank you!
transilvanianhunger said:
As long as u see Samsung logo when it starts up I don't think its bricked. Can you still go into CWM?
Sent from my GT-S5830D using xda premium
Click to expand...
Click to collapse
Thank you for the good news (at least it is not bricked) . What do you mean with "go into CWM"?
Clock Work Mod recovery (CWM)
Manvendra05 said:
Clock Work Mod recovery (CWM)
Click to expand...
Click to collapse
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
atrotta said:
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
Click to expand...
Click to collapse
I dont know if 5830 B is compatonle with this rom,better flash a stock rom trough odim before u brick the pone.
regards~
Sent from GALAXY Ace SII v9~
atrotta said:
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
Click to expand...
Click to collapse
If you reflash the stock rom with Odin, it flashes the stock recovery back(you lose CWM).
What chipset does the s5830B have? What frequency did it have on the sticker?
Flash a rom for s5830B from Odin, and don't use a one package use the full one with separate files.
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
pjimbo said:
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
Click to expand...
Click to collapse
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks that worked just fine. Nearly bricked the phone using someone's restore to stock guide. But now this kernel has installed fine.
Unfortunately I am trying to flash cm10, it installs fine, but it just loads back up into recovery mode, and wont boot properly.
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
pjimbo said:
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
Click to expand...
Click to collapse
All sorted now, flashed it back to stock with a recovery pack from a post on here
Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!
asrivastava said:
Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!
Click to expand...
Click to collapse
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....
XDRdaniel said:
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....
Click to expand...
Click to collapse
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.
F4uzan said:
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.
Click to expand...
Click to collapse
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...
XDRdaniel said:
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...
Click to expand...
Click to collapse
that's right, CWM can only be installed via Stock Recovery and instead with ODIN ! Odin can only be used for flashing stock rom and Bootloader
Well, tbh, I just did what he said and flashed it on with Odin and it has worked normally since then.
Flashed a lower vresion of CWM with Odin first then through the recovery, upgraded it to the latest one.
Worked fine for me.
yes your suggestion reaaly work , been trying update cwm 4 to 5 through odin always get an error..
Right, to cut a lonnnnng first post story short, basically, rooted my phone yesterday, went well, installed some rooted apps and was having fun, one app, 3D something, from Google Play. it asked me to restart my phone after setting superuser (i thought this was quite weird) anyway i boot locked my phone - got the typical "Samsung GALAXY Note GT-N7000" and the phone woundnt move from there, i can gt into vol+ home and power and vol- home and power still. so after some research i found i had to flash therelivant stock ROM using odin - so i did. and it worked. then at somepoint today my phone got stuck in a boot loop consisting of the GT-N7000 screen then the samsung spash screen. when i do vol+ home power, i get in red text "E:/error%20in%20/data/recovery_last_kernal_log.txt" - what does this mean? and how(if at all) do i fix it?
i have curently re-flashed stock ROM and vol+ home power & "wipedata/factory reset" and so far so good......
any help or shed light would be a great help
Phone is Samsung GALAXY Note GT-N7000
Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
it was called "Chainfire3d" and could you write the bove in steps?
i currently have flashed stock JB rom... and its working for now, but i dont want to turn it off incase it loops again. so what should i do from here, its currently un-rooted...
thanks a million for your reply
1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
so put philz kernel on the ext sdcard
vol+ home power - and install
boot into cwm and choose clean before new rom install
reboot into download
and then flash stock rom?
one last question... will the lastest philz kernel work?
thanks again
i currently have PhilZ-cwm6-XXLT4-OXA-4.93.6-signed on my external sd.... will this do?
yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.
nokiamodeln91 said:
yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.
Click to expand...
Click to collapse
and then clean before new rom install?
xDEADFAMOUSx said:
and then clean before new rom install?
Click to expand...
Click to collapse
yes if you got the philz recovery installed.
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
Try to flash philz kernel via odin in download mode using the .tar file. If it succeeds try to reboot to recovery using volume up+power+home button.
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
When you flashed stock rom did you include repartition? Can you go to either download mode or recovery mode now?
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
Try to flash philz kerne
Kael ruch said:
Try to flash philz kerne
Click to expand...
Click to collapse
Go home Kael Ruch
Sent from my Nexus 5 using Tapatalk