Related
Magnetic Trick #1
Okay, so you are loving that you can sling a football game to your new NC while snacking in the kitchen, but your are stumped.....where can you safely mount your nook? If you purchased a Industriell Easel Cover, then your problem is solved. It turns out that the magnet, built to hold the clasp in place, is a very strong rare earth type. So strong in fact, that you can mount the entire thing on the refrigerator door. I know it seems risky, but the mount is surprisingly firm. Now, I not suggesting you attempt with house full of drunken Super Bowl buddies, or lot of active refrigerator friendly little ones about; but for breakfast news viewing you might find it handy.
****note: Any metal surface will work, you could for example use the side of the refrigerator if you find the door too risky. Please whatever you do, don't use the oven.
Magnetic Trick #2
Still not sold on this versatile NC cover? Then check out this second horizontal or vertical mounting option. Take a metal bookend holder, the old school library type, with the cork or felt protective base. Bend the vertical tab to your favorite viewing angle, then slide it between the flap and back cover. The magnets stick to the bookend, the mount is extremely stable ,and it looks nice to!
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
OP thanks for solidifying my choice. I was on the fence before this idea of yours.
gedster314 said:
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
Click to expand...
Click to collapse
They didn't... .
I did it all from my Nookie...
The old classics
gedster314 said:
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
Click to expand...
Click to collapse
It turns out that I have such a car, and old 66 mustang convertible, and I used to drive it, single bowl drum brakes and all, in Houston traffic! Yes, I was younger, yes I was very very, okay, extremely stupid, but the funny thing was the way other people reacted. I had driven an old 3/4 ton company truck and it was dog eat dog.....brutal Darwin style driving, but when I hit the road in the Mustang, the traffic parted like for the Red Sea for Moses. People would wave me in, if you've ever hazarded the Houston Interstate nightmare you can appreciate how incredible that is. It was an amazing experience. Hmmm, you've got me thinking now, I might have go see if that thing will stick to the dash...........
vizographic said:
Magnetic Trick #1
Okay, so you are loving that you can sling a football game to your new NC while snacking in the kitchen, but your are stumped.....where can you safely mount your nook? If you purchased a Industriell Easel Cover, then your problem is solved. It turns out that the magnet, built to hold the clasp in place, is a very strong rare earth type. So strong in fact, that you can mount the entire thing on the refrigerator door.
Click to expand...
Click to collapse
**** me, it works!
like magic
Croak said:
**** me, it works!
Click to expand...
Click to collapse
Yeah, that was my first reaction.
I told myself there was no way in hell I was spending 40 bucks on a case. And even though I have 0 plans to do what you mentioned, I still bought it.
OP, i hate you.
Glad to be of service
Main Target said:
I told myself there was no way in hell I was spending 40 bucks on a case. And even though I have 0 plans to do what you mentioned, I still bought it.
OP, i hate you.
Click to expand...
Click to collapse
Music to my ears
Very nice case! But how is this slinging of football games accomplished? Using a sling box?
Sent from my LogicPD Zoom2 using XDA App
slingbox
foethalove said:
Very nice case! But how is this slinging of football games accomplished? Using a sling box?
Sent from my LogicPD Zoom2 using XDA App
Click to expand...
Click to collapse
The Nook Color works well with my slingbox, I think I have an AV model. I can also confirm that it tethers to my captivate (froyo 2.2 rom) and slings over cell network.
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Hardrive Havoc
dawynkoop said:
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Click to expand...
Click to collapse
I'm kinda glad, the Nook Color doesn't have a compass.
dawynkoop said:
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Click to expand...
Click to collapse
I thought the same thing! until I noticed that It was sticking to the top of my car at an impossible angle. Then I realized that I had been setting it on top of my laptop to transport. My first thought "Oh crap!"
no damage, but I'll be more careful now. lol.
Times are a changing.
vizographic said:
I'm kinda glad, the Nook Color doesn't have a compass.
Click to expand...
Click to collapse
10equals2 said:
I thought the same thing! until I noticed that It was sticking to the top of my car at an impossible angle. Then I realized that I had been setting it on top of my laptop to transport. My first thought "Oh crap!"
no damage, but I'll be more careful now. lol.
Click to expand...
Click to collapse
Well, solid state drives are getting cheaper and faster every day. For that matter, I haven't used my venerable old laptop much since I fell in love rooting some nookie. If the recent breakthroughs in Bluetooth plays out I might have to retire the old girl.
Wow! I wonder how early BN opens...
very darn cool...I was trying to stomach getting the Lautner case, as I wanted it to look half descent but want portrait and landscape positions (landscape for airplane flights)...I may go with this...
Thanks to the OP...
I got my nook a week before my wife went into labor. When we were leaving the hospital I forgot my nook on the rook of our car. Our house is about 9 turns and 4 miles away with speeds from 40-60 mph. I got to about 1 mile away from home going 60 mph and I heard a thump. I looked in the rear view mirror and saw my nook on the spoiler. I stopped and everything was fine. I am betting the magnet helped the nook stay on top of our car and I am so thankful I got the case.
Bouncing Baby
Nice magnetic nook save and a new baby to boot. Heck a new baby is almost as nice as getting a new phone, even better because the baby will get continuous free upgrades for life. Samsung and HTC can't match that. All joking aside though,can you imagine how sad and primitive all Dads' hot technology will look to that little one twenty years hence? Well my best wishes to mommy, the little one......and congratulations to the new Dad!
I was planning on going to BN this morning to buy this case and use it with the book-end mod for landscape viewing, but then I found (and ordered) this:
It's under $20 and has 17 5-star reviews and 3 4-star reviews (out of 20 total reviews). There are also a couple of customer-contributed images of a Nook Color in a case sitting in it, in both portrait and landscape.
Hi jason, I saw that stand too and at the time I thought it might make a nice bedside stand. I went with the mag cover for the portability, the protective cover it would provide and, because of my poor impulse control..., the old "I have to have it right now". Its best feature, the magnetic component, was an unexpected bonus.
I'm still interested in how your stand performs, stability wise or, any such observations you might wish to share, once you take the plunge and get some user experiance.
Sent from my LogicPD Zoom2 using XDA App
Dilemma, I have a nook color and the kids are bugging me to watch movies in the backseat of the car with it. I am looking for a mount that can strap to the two front seats headrests and basically allow the NC to hang in the open space between the seats. Has anyone seen such an item for the NC yet? I have three kids back there so middle location mounting for the NC is a must.
Yea, I was thinking about the same thing. I'm going on a trip in two weeks and would love to get some ideas from people. I was thinking of rigging something up with bungie cords.
Ebay is your friend... This looks to be a universal dock for Ipad and Galaxy tab, so we should fit being in the middle of the two devices.
http://cgi.ebay.com/Car-Headrest-Mo...ultDomain_0&hash=item255d934bd8#ht_1864wt_831
Not sure about the middle placement, but this is what I did in my infiniti.. (kind of a hack, but no drilling or cutting was required)
Thanks for the tip on the eBay item; I will keep that in mind for rear mounting to one headrest. I am going to keep on the search for something I can do between the two seats so I don’t have kids attacking each other back there trying to see the movie!!
I am considering getting a cheap silicone sleeve for it and then super glue some sort of strap to the back of the sleeve, to hang between the two seats. Likely will not look pretty but may serve its purpose if I can’t locate a "true" device to meet my needs.
PS- your hack looks pretty darn good for GPS usage!
norkoastal said:
Ebay is your friend... This looks to be a universal dock for Ipad and Galaxy tab, so we should fit being in the middle of the two devices.
Not sure about the middle placement, but this is what I did in my infiniti.. (kind of a hack, but no drilling or cutting was required)
Click to expand...
Click to collapse
dvcbwvfans said:
Thanks for the tip on the eBay item; I will keep that in mind for rear mounting to one headrest. I am going to keep on the search for something I can do between the two seats so I don’t have kids attacking each other back there trying to see the movie!!
I am considering getting a cheap silicone sleeve for it and then super glue some sort of strap to the back of the sleeve, to hang between the two seats. Likely will not look pretty but may serve its purpose if I can’t locate a "true" device to meet my needs.
PS- your hack looks pretty darn good for GPS usage!
Click to expand...
Click to collapse
Jeez man, you hit the brakes hard and that will act as a sling shot shooting the nC back into your kid's faces. I would try to find something that will hard attach to the center console if you have one. Don't use bungy cords or anything like that unless you budget some dental work to go with it.
bobzdar said:
Jeez man, you hit the brakes hard and that will act as a sling shot shooting the nC back into your kid's faces. I would try to find something that will hard attach to the center console if you have one. Don't use bungy cords or anything like that unless you budget some dental work to go with it.
Click to expand...
Click to collapse
Yeah point taken! I guess I typed my last comment faster than my mind was processing it. I will consider the kids safety first with my design- if I ever get around to building this. I think I will look at those dvd bags they sell at the store for portable dvd players that mount between two seats and get some ideas from one of those.
I'm looking for a way to attach the Nexus 7 to my fridge or to my kitchen wall, to be used with cooking apps, kitchen timers, etc, without taking up precious counter space.
I found a product called Hedgie:
http://www.ebay.com/itm/HEDGIE-Univ...905?pt=LH_DefaultDomain_3&hash=item43b2aaadd9
But $17 for a piece of Velcro seems exaggerated. Anyone know of a better solution?
Get the cheapest TPU case you can buy and attach adessive velcro on the back and on the fridge. Easy as pie.
Or... you can buy a sheet of magnet plastic and glue it to the case and then you don't have to glue anything to your fridge.
I agree with the above post. I always buy a few tpu cases to use for special projects around the house. One word of advice though... Before you adhere a magnet to the Nexus 7 make sure you know where the auto off-on feature is located. If you accidentally glue a magnet under it it will effect you nexus 7 turning on and off.
Sent from my Nexus 7 using xda app-developers app
If you have a glass splashback, you could use a car mount and attach it to the glass. Just tried this with my exomount and Galaxy Nexus, assume it would work the same with the N7.
Sent from my Nexus 7 using Tapatalk 2
MistaBishi said:
If you have a glass splashback, you could use a car mount and attach it to the glass. Just tried this with my exomount and Galaxy Nexus, assume it would work the same with the N7.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
That should work well on the undersides of cupboards and large enough tiles too, depending their surface. I'd say a car mount would the best idea.
manocheese said:
That should work well on the undersides of cupboards and large enough tiles too, depending their surface. I'd say a car mount would the best idea.
Click to expand...
Click to collapse
Yeah, that would work too! Give it a shot.
Sent from my Nexus 7 using Tapatalk 2
Thanks. I'll try your suggestions and post back with pictures...
I was kinda hoping for a result that'll look something like this (check out the fridge picture):
http://www.belkin.com/au/IWCatProductPage.process?Product_Id=577760
http://www.amazon.com/Kitchen-Cabinet-Mount-iPad-2/dp/B005NHR6KM
I got one of those from my wife for her birthday last year, we love it. Holds her 8.9 inch LG G Slate, removes quickly.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
moryoav said:
I'm looking for a way to attach the Nexus 7 to my fridge or to my kitchen wall, to be used with cooking apps, kitchen timers, etc, without taking up precious counter space.
I found a product called Hedgie:
http://www.ebay.com/itm/HEDGIE-Univ...905?pt=LH_DefaultDomain_3&hash=item43b2aaadd9
But $17 for a piece of Velcro seems exaggerated. Anyone know of a better solution?
Click to expand...
Click to collapse
If you have an old 20GB hard drive lying around, the magnets in the old 3.5" drives are really strong.
You might want to try what I did with my phone, to attach it to the bottom of my monitor when I'm at my desk.
Take the magnet and the piece of metal that it's attached to and bluetack this to your fridge. Then cut the bottom flat piece out of a tin can and bluetack this to the inside of the Nexus's back cover (I am guessing that there is a suitable flat area).
If you want it attached for the long term than use something else more permanent than bluetack on the fridge.
OP - I am also looking to wall-mount my Nexus 7.
So far, the best options I have seen are:
1) TPU Case with PadTab (Link to PadTab HERE)
2) Wall-Mounted Tablet Dock (link HERE).
Did you already decide how to mount your N7?
Kind of a dead thread, but if anyone else is looking for a wall mounting idea, I'm looking at a couple of these: http://www.amazon.com/gp/product/B004Z88WSK/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A29AY3J0MGBUKJ
jpmi23 said:
Kind of a dead thread, but if anyone else is looking for a wall mounting idea, I'm looking at a couple of these: http://www.amazon.com/gp/product/B004Z88WSK/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A29AY3J0MGBUKJ
Click to expand...
Click to collapse
I got 2 sets of these when they first came out on some special intro deal and paid $20 delivered. For what they are, they work well enough. Just realize that is simply a pair of cheap plastic holders you glue to whatever surface you want. You only get 1 orientation and size depending on placement. Installing them level and at the correct width is up to the installer
The pad tab from the previous post to your stuck on a TPU case would give more options albeit at about twice the cost, 15 vs 20 + 8 (or more) for TPU case.
Sent from my Nexus 7 using Tapatalk 2
Know anyone with a 3D Printer or CNC Router?
http://www.thingiverse.com/thing:37213
fangthorn said:
If you have an old 20GB hard drive lying around, the magnets in the old 3.5" drives are really strong.
You might want to try what I did with my phone, to attach it to the bottom of my monitor when I'm at my desk.
Take the magnet and the piece of metal that it's attached to and bluetack this to your fridge. Then cut the bottom flat piece out of a tin can and bluetack this to the inside of the Nexus's back cover (I am guessing that there is a suitable flat area).
If you want it attached for the long term than use something else more permanent than bluetack on the fridge.
Click to expand...
Click to collapse
lmao. I use HDD magnets too. Guys are crazy strong and thin = perfect. I used 2 for a LCD drawing note clip board thing and it almost pulls the fridge over (not quite but you know what I mean).
For the Nexus, I would use 1. Glue it to a TPU case and done.
This probably the one you are looking for, it's a specific kitchen mount for Nexus 7, i got it on Independence Day, it's doing 20% discount promo again now, good time to get one.
http://www.wanpool.com/prod-Kitchen_Mount-Nexus_7/item291.html
Use it to choose between crushed or cubed ice.
Sent from my fridge using xda app-developers app
I do an awful lot of traveling, which means an awful lot of rental cars. At home I use a Pro-Clip system for my Note 2, but haven't found anything that is easily packed and easily transferable from rental car to rental car. I would rather have a vent mount solution than a "windshield suction cup" or a "weighted bean bag that rests on the dash".
Anyone have experience with a solid, small, easily-packed vent mount/clip that will accommodate the Note 2?
Thanks in advance.
I have one that mounts into my CD player slot. Universal and works wonderfully. About $30 on Amazon
Sent from my VZW Note II
Just ordered the CD one for 17 bucks. Won't ship til 21st though. I tried a vent mount from Radio Shack that was on clearence but didn't work right with my vents.
http://forum.xda-developers.com/showthread.php?t=2028500
Sent from my SPH-L900 using xda app-developers app
Cool. I used to use ProClip mounts but I switch phones so frequently that I had to stop doing that. I've been using one for about 6 months and it's been great
Sent from my VZW Note II
Looks good, but a little bit bulkier than I'd like. Ideally it would be something that fits easily into the outside pocket of my computer bag with minimal fuss. I hadn't thought about a CD-slot holder, thanks for the pointer. I'm not sure it's a workable solution for me, though, as not all my rentals have a CD slot in the dash. I'm almost tempted to grab a couple of design engineers and put up a Kickstarter for something sturdy that folds credit-card thin and hooks into the vents. =)
URPREY said:
I have one that mounts into my CD player slot. Universal and works wonderfully. About $30 on Amazon
Sent from my VZW Note II
Click to expand...
Click to collapse
Pics? And is that a T/A or a Firehawk? Hard to tell from your avatar but the nostrils look bigger.
flaring afro said:
Pics? And is that a T/A or a Firehawk? Hard to tell from your avatar but the nostrils look bigger.
Click to expand...
Click to collapse
Sure I'll grab some. It's a Firehawk. I'm glad somebody knows the difference!
Sent from my VZW Note II
URPREY said:
Sure I'll grab some. It's a Firehawk. I'm glad somebody knows the difference!
Click to expand...
Click to collapse
Alright thanks. And I have a red '98 Trans Am (not a WS6) with the 6 speed. I'm jealous. imo the WS6 hood should have looked like the Firehawk's as it fits the curves of the car better.
Here are a couple pics I snapped this morning.
Sent from my T-Mo SGS3
URPREY said:
Here are a couple pics I snapped this morning.
Sent from my T-Mo SGS3
Click to expand...
Click to collapse
I use this mount as well and love it. No vibrations, and it fits the phone with my flip case on it. Also holds the Note 2 in landscape as well. The price is perfect but I would have paid twice as much for it.
http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
So I received this today, it was selling for local sellers for $15+ but I found it from this seller for under $3 (inc shipping!), I couldn't justify the outrageous markup, and ordered from HK, came in 2 weeks. It comes with a plastic adhesive disk you can use to mount it to your dashboard. The phone holder part is connected to the mount using a really sturdy ball joint which basically allows quite a bit of freedom when adjusting the position of the phone.
I was hesitant because I've purchased other mounts before that were more expensive, and they either didn't stick as well as I liked, or were too loose, or didn't give me the flexability I wanted. For under $3 I'd figure I'd try it, and I'm glad I did. It is IMO the best mount I've used. It really sticks! On glass I had a hard time taking it off, and using the sticky disc on my dash, it's pretty much stuck there. Very low profile too! You are able to position it so I have the phone coming down over the vents.
It's very stable, I've taken it over speed bumps,and I do not have a soft riding car, and it's stuck, even some of these bumps causes my Garmin GPS mount to fall off the windshield sometimes!
I'll have to take some pictures, probably take some tomorrow and post them up.
[edit]Pictures are up
They are not the best pictures, it's really early in the morning here, taken from my garage, in my car, from the driver's seat using an DSLR and a large flash...very cumbersome...I adjusted the settings to have the flash bounce off everything as minimal as possible.
I positioned the mount so where the phone sits is in front of vents for VERY easy access to the phone, (putting it on the windshield makes it too far to use), useful for navigating, or passenger music selection. The holder (where the phone sits) can be rotated 360 degrees, so I could have the phone in portrait instead of landscape. To be able to place the phone in front of the vents was the major reason for buying this mount, it's where I want my phone to be. Oh and it doesn't block the vents (at least that much) as you can still position them, potentially an issue for passengers in the rear though...
I wonder if they have improved it. my experience with this mount in the past was it wouldn't hold the weigjt of the phone.
glad to know it's working!
Sent from my SPH-L900 using xda app-developers app
Without the adhesive disk, the mount won't really hold to the dashboard or a wooden desk with the note 2...but will attach to glass and hold and hold and hold. It holds on to the adhesive disk the same as it holds onto glass.
thank you for sharing..
Tried one of these (DIFFERENT SUCTION CUP TYPE CAR MOUNT) with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!
one80oneday said:
Tried one of these with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!
Click to expand...
Click to collapse
I don't think this mount can even hold the size of the N7..pretty much the width of the Note 2 is the largest you can go with this mount...not even sure how you got a nexus 7 on it.
Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app
alterstill said:
Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.
one80oneday said:
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.
Click to expand...
Click to collapse
Lol @ nikes.
I didn't like suction cup mounts either (esp because the OEM garmin one I have falls off regularly...and I've tried others that have failed as well...and I don't like the vent ones because 1) they don't like my vents 2) they prevent the vent from being adjusted...this is the only one I've used that really works (YMMV) but for under $3 it's not much of a gamble.
would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
right now I am using a igrip (you can get them oem for $13) the nice german made ones.
its positive release (bad) but it holds nicely and the note ii in case is so wide it BECOMES a positive hold since you have to force the note ii into it to make it fit but the result is its VERY secure and I love the arm and mount.
Here is the igrip in the minivan
would love to see some pics of your note II in this holder you linked too !
Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Sent from my SCH-I605 using Tapatalk 2
nerys71 said:
would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
would love to see some pics of your note II in this holder you linked too !
Click to expand...
Click to collapse
Not sure what you mean about positive hold or positive release...but it's a spring loaded clamp and you have to pull on it to fit the note 2 in, and it clamps on the note 2, I have a TPU case (S-curve, which is another under $3 you can find on ebay, and IMO it's the best plain TPU case i've used as well, and I've spent lots of money on cases in the past, it's got good grip, more rigid than other TPU cases, and is soft enough to absorb shocks...back on topic)
Dakota0206 said:
Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Click to expand...
Click to collapse
I've used plenty of expensive mounts in the past, and I live in Australia a country where stores have very poor return policies and seriously I love this mount the most because of the ways you can position it, but I only have it in one position because that's where actually want it.
Pictures are in the first post as attachments
Dakota. OFF the caffeine. Now go sit in the corner dill the DT's wear off and come back when your normal again and its not about the price its about the 3 weeks shipping time to "find out" when a couple questions can possibly save me 3 weeks waiting
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!
nerys71 said:
D
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!
Click to expand...
Click to collapse
Oh I just posted the pictures! Lol! You didn't miss anything
And yes it is Positive hold, very strong hold.
I will test the mount more thoroughly later and report back.
Looks good, and at least I know it will fit nicely in my Subaru
Sent from my GT-N7100 using xda app-developers app
ahh good thought I was going whacky there
good, strong hold is very good be sure to see how much more "room" it has for something bigger (if thats not already the max) ie can it go half inch biggger etc..
the problem with expensive mounts is they are actually $3 mounts designed well with good quality control.
SO if you can find the cheap mount with the same good design .....
problem with my igrip I pictures is that you have to FORCE the note II into the mount with case. with plastic style cases not an issue but lately I am loving the wood bamboo cases I got. the igrip scratches them (them arm wings have plastic LIPS that you have to "get past" to put it in and take it out. this is good since that keeps the phone from falling out forward. but since I am slightly over what its designed to hold these lips TOUCH the case in insertion and remove with some force ie scratching the wood.
so I am looking for alternatives
Daemos said:
http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
Click to expand...
Click to collapse
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.
The bad thing about the vent mounts is that, depending on the design, the phone usually blocks airflow to the driver or passenger and if the heat is on this heats up the phone generally depending on whether or not the vent can be completely shut off.
Shady Gambino said:
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.
Click to expand...
Click to collapse
I'm 100% sure it's not a iottie design, as I've seen this exact same mount sold under different brand names (BBM in South Korea). There are times (many times esp for low cost items) where Chinese factories design the mounts/products, pitch them to different clients, who then apply their own branding for their specific market/region.
So...in the end they pay even less than what you'd pay on ebay...but charge you way more. So if you are happy getting ripped off by companies who charge lots of money for very little innovation...go for it.
To answer questions:
The width of the note 2 + my case seems to be the mounts physical limit for opening.
In portrait it holds just as good as landscape.
However, I have found if you use the mount as shown in the iottie, it seems firm, but not as stable as the position I have, but I don't plan to use it that way as the other way works better for me.