Database Develop

Problem wit galaxy note after change of the DPI

Hi All,
Hope I am in the good place to present my problem (i'm new in the forum and I'm just learning the "how to").
Yesterday I've rooted my Gnote (GTN7000 XXLPT - ICS just installed from OTA update). It was the paradise before i decide to instal "DPI change" ...
I set the DPI from 160 to 240 and then save + reboot ... Till that moment, my GNote stuck on the launching logo (Samsung Galaxy Note N7000).
I'm not an expert of Android (the proof ...) and I'm looking for the safest and easiest (step by step) solution to revive my GNote.
I know that XDA is an expert forum and therefore I please every of you that will see my request to help me ...
Ps: A part from the root I have applied no other manipulation on the phone (even the setup of the debuger mode).
Your kind help with this will be saving for me, given that there is no repair / after sale service available in my country.

Flash a safe kernel (speedmod),enter recovery and wipe data.

tibosee said:
Flash a safe kernel (speedmod),enter recovery and wipe data.
Click to expand...
Click to collapse
Thank you for your reply Tibosee,
However, I wonder how I can flash the kernel (a little step by step tutorial will be welcome).
Please help with this.
Regards.

I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Kernel Installation
Install either through CWM or PC/Mobile ODIN in the usual manner. Wiping Cache and Dalvik Cache is unnecessary and wont make any difference. Flash only with 25% or more charge on the phone
Click to expand...
Click to collapse

If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.

evilspyre said:
If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.
Click to expand...
Click to collapse
Don't be to hard on him its not stupid to think that an app on market will work as advertised
Sent from my GT-N7000 using xda premium

Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2

Chillz88 said:
Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Rom toolbox works if you don't want to mess with build prop but evilspyre already mentioned that
Sent from my GT-N7000 using xda premium

Rivan_92 said:
I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Click to expand...
Click to collapse
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards

PatrickNkamgnia said:
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards
Click to expand...
Click to collapse
You only use one of the two applications; Mobile Odin or PC Odin. You don't have to use them together. Since your phone doesn't boot, then I assume Mobile Odin is out of the question. I'm gonna write a quick guide to use PC Odin.
1- Download PC Odin from this link: http://ul.to/xt4607xx (you can search the forum, you will find many download links for Odin 1.85)
EDIT: Here's another link, the 1st one doesn't want to work anymore. http://k0nane.info/rom/odin-185.zip You can google "odin 1.85" and open the first link (it should be an xda forums attachment)
2- Download the standard tar file of the Hydracore 3.5 kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1749863
3- Open PC Odin and click on PDA and choose your kernel tar file downloaded from step 2.
4- Remove all check marks and leave only Auto Reboot and F. Reset Time CHECKED.
5- Turn your phone off and remove the battery and reinsert it.
6- Turn your phone on by pressing and holding the Power button + Menu button + Volume Down button (to get into Download mode).
7- Connect the phone to the USB cable and connect it to the computer. Odin should show a yellow box.
8- Press Start in PC Odin. The yellow box will turn green which means a successful flash.
9- Now you can wipe data safely (never wipe data using stock ICS kernel btw).

How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.

" 9- Now you can wipe data safely (never wipe data using stock ICS kernel btw). :)" [/QUOTE said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse

chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.

If your build.prop is corrupted/broken, flashing a new kernel won't fix it because it won't replace your build.prop.
As Chas said, the easiest fix would be to flash a custom ROM, as this will replace your build.prop.
Regards,
Dave
Sent from my GT-N7000 using Tapatalk 2

chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Well, to flash a new ROM, he needs to be on a safe kernel...
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
PatrickNkamgnia said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse
Well, from what I read, most (if not all) Samsung stock ICS kernels have a bug which would corrupt the data partition when you wipe on any of them. The problem would appear when you wipe ON them, and not wipe them.
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
I would wait till he replies to be on the safe side. In the meantime, try to burn some time and read some of the threads in the Note's android development section.
Sent from my GT-N7000 using xda app-developers app

Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)

joey_oggie said:
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
Click to expand...
Click to collapse
Wiping /data won't touch /system where build.prop is
Sent from my GT-N7000 using xda premium
---------- Post added at 09:04 AM ---------- Previous post was at 08:55 AM ----------
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
Xda is full of instructions on how to use odin search it. Flashing a kernel won't fix your problem. Best to do as previously advised and flash a new rom, stock or custom either will do
AND DON'T PANIC take it slow and don't do anything before you understand the process your phone is currently in no danger what so ever but a faulty flash can definitely brick it
Sent from my GT-N7000 using xda premium

apurvapatel said:
Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)
Click to expand...
Click to collapse
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.

PatrickNkamgnia said:
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
Very sorry to say buddy, your Note most likely is bricked. I hope I am wrong.
Try installing a stock ROM, preferrably Ginger Bread ROM via PC ODIN. If it fails, most likely, at FactoryFS write, then your phone is surely bricked.
Let us know how it goes, we can guide you further accordingly.

PatrickNkamgnia said:
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
see if you can still go to download mode and reflash a stock GB on your device. If it's successful then your good to go... if not, then look for the thread here to revive a brick phone.. note down the errors your getting (if there are any errors at all) when your going to reflash it again.

Help! stuck on SAMSUNG screen.

Hello today i downloaded application called Anim Mod and then i installed it and then i opened the Anim Mod application and pressed Blur button then it downloaded something and then i had to boot my phone. wel i did boot but its now stuck in this samsung logo screen. my phone was rooted
i didnt know what to do so i just went to recovery mode and set it to factory settings and booted and its still stuck on this samsung logo...

what rom are you on ?

Im not sure :/ i have only rooted my galaxy note nothing else but if it helps its running 4.0.4 ICS

so your recovery: was that the CWM or stock recovery ? If it is recovery 3e.. stop doing a factory reset.
download http://www.mediafire.com/download.php?3cnf2ax9apsebef and place it on external SD. then boot into recovery and choose apply update from ext storage
choose the zip you downloaded and flash it.
once done. power off and boot into recovery again
then do a factory reset, wipe cache, advanced> wipe dalvik cache. then reboot

Ummm i did flash that thing and i wiped data :/ i did all what you told me and its still stuck

Ok then boot into download mode and flash a stock rom using pc odin. This will take you to factory form. Start from there.

nokiamodeln91 said:
Ok then boot into download mode and flash a stock rom using pc odin. This will take you to factory form. Start from there.
Click to expand...
Click to collapse
Can you give me some kind of tutorial link? or something im new doing this

http://forum.xda-developers.com/showthread.php?t=1424997

nokiamodeln91 said:
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
¨¨
what stock rom i could pick? i live in finland

You could choose any. Germany for instance.

nokiamodeln91 said:
You could choose any. Germany for instance.
Click to expand...
Click to collapse
Okay one question. Can i totally **** up my phone doing this? bricking it?

Tomza2211 said:
Okay one question. Can i totally **** up my phone doing this? bricking it?
Click to expand...
Click to collapse
If not done correctly. Do not perform any kind of wipe on stock ics kernels. Install philz kernel for wipes. Otherwise this method is considered pretty safe.

nokiamodeln91 said:
If not done correctly. Do not perform any kind of wipe on stock ics kernels. Install philz kernel for wipes. Otherwise this method is considered pretty safe.
Click to expand...
Click to collapse
How long this will take to put this stock rom? it has been installing it now for 10 min

6 mins approx. Where is it in the Odin? Stuck somewhere? Is the bar progressing in odin and on the phone?

nokiamodeln91 said:
6 mins approx. Where is it in the Odin? Stuck somewhere? Is the bar progressing in odin and on the phone?
Click to expand...
Click to collapse
no, there is no any bars at all :/ my phone shows me android robot and Downloading... Do not turn off target !! and odin shows some messages nothing about that its done or it have failed
Umm now i got error (Can't open the serial(COM) port)

You need to have Samsung uab drivers installed. Install kies first. That will install the required drivers. Them close kies and use odin again.

nokiamodeln91 said:
You need to have Samsung uab drivers installed. Install kies first. That will install the required drivers. Them close kies and use odin again.
Click to expand...
Click to collapse
i have done that but might this be the problem? i download 4.0.3 stock rom :/ my phone was on 4.0.4

That does not matter. You can install even 2.3.6

nokiamodeln91 said:
That does not matter. You can install even 2.3.6
Click to expand...
Click to collapse
Well... what could i do? omg my phone is fcked
I need some serius help now! plz guys i dont wanna lose my brand new phone

had the same problem, fix it restoring a previous rom

[Q] How to UnBrick galaxy n7000

Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards

ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?

what rom were you on? if JB, try a factory reset.

nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck

lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?

ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?

nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?

http://forum.xda-developers.com/showthread.php?t=1901191

nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?

So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.

nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.

i cannot help you in this case if there is no efs backup.. so.. you on your own..

nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.

This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.

Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.

You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.

nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.

PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.

ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet

(Solved) i9070 jellybean can't start

hi all
i have samsung gt-i9070
i was on jellybean stock rom
i tried to install Cm 10.1 but it didn't start i did something wrong but it isn't the problem
i wanted to return to stock jellybean i falshed it by odin but the setup wizard crashed several times and "blahblah.gapps failed to start"
i tried several copies of the stock rom and every time i wiped cashe and reset everything using Cwm
I9070JVBMD1_I9070OJVBMD1_XSG
I9070XXLQG_I9070ITVLQ3_ITV
it all crashed
so i managed to downgrade to Gingerbread but i can't return to jelly bean any more
note:in Cwm : "efs can't be mounted" & "failed to load efs" in red
please help >>>>>>>>.thanks all
note:there was a solution didn;t work for me in forum
it is
install stock jelly-root-wipe system and preload-mount-install stock jelly
finally it is solved from this topic
http://forum.xda-developers.com/showthread.php?t=2353293

try to installing FULL (3 files cont., by Odin) GB
after reboot just flash single-file JB
Sent from SGSA using Tapatalk 4

pawelarc said:
try to installing FULL (3 files cont., by Odin) GB
after reboot just flash single-file JB
Sent from SGSA using Tapatalk 4
Click to expand...
Click to collapse
i did that before and i'm on Ginger now
but ican't return to jelly it crashed all times

up
please help

* Use Odin 3.07 for JB not 1.85,
* Download THIS firmware and extract from zip,
* Make sure you installed drivers (ODIN should say "Added" when you connect your phone in download mode)
* Open ODIN and give the tar file (you extracted) to PDA section,
* Close the device then go into download mode and connect device to PC, (and again ODIN should say "Added")
* Flash
- after flashing phone probably go into bootlop so remove the battery and go to the recovery mode (VolUp-Home-Power) choose WIPE DATA / FACTORY RESET (This one wipe your apps not internal storage)

it can't help
i did that and the wizard crashed again no change

up up please hellllllllp
i will burn this mobile

Install JB, go to recovery ,do a factory reset.

Sh0m1 said:
Install JB, go to recovery ,do a factory reset.
Click to expand...
Click to collapse
i did that more than 10 times no change
i did it by the original recover and custom recover cwm

amr diab said:
i did that more than 10 times no change
i did it by the original recover and custom recover cwm
Click to expand...
Click to collapse
What cwm did you used? Temp one?
Try this: put some JB stock based ROM on your sd, open CWM and do factory reset and wipe everything you see (cache, dalvik, system, preload...). After that install ROM.
Sent from my GT-I9070 using Tapatalk

shut_down said:
What cwm did you used? Temp one?
Try this: put some JB stock based ROM on your sd, open CWM and do factory reset and wipe everything you see (cache, dalvik, system, preload...). After that install ROM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
yes temp one
i did that and i installed harshjelly
there is no wizard and it opened normally but no apps can start
and there is no call-camera everything not appeared

amr diab said:
yes temp one
i did that and i installed harshjelly
there is no wizard and it opened normally but no apps can start
and there is no call-camera everything not appeared
Click to expand...
Click to collapse
Try to mount prelaod in recovery, and flash it again. If that do not help, download gapps for 4.1.2 and flash it. Maybe it is because of wrong gapps, left from CM.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Try to mount prelaod in recovery, and flash it again. If that do not help, download gapps for 4.1.2 and flash it. Maybe it is because of wrong gapps, left from CM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
didn't help man
i also format system and preload then mount but no help too
but i think this problem because of efs can't be mounted in recovery ?
and there is an option on odin clear efs i tricked it but not help
thanks for your replies

up

use the search:
http://forum.xda-developers.com/showthread.php?t=2548933
Exactly the same case, with solution.
EDIT: my second link was wrong: it is actually a previous thread about same case.
http://forum.xda-developers.com/showthread.php?t=2546728

alete89 said:
use the search:
http://forum.xda-developers.com/showthread.php?t=2548933
http://forum.xda-developers.com/showthread.php?t=2667579
Exactly the same case, with solution.
Click to expand...
Click to collapse
Thanks God
there is a hope
but i'm sorry i can't understand this
On another device (same model and region) I did:
dd if=/dev/block/mmcblk0p2 of=/sdcard/modemfs.img.md5
Copied generated file to my sdcard and did:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
Reboot and it's done.
how i use this codes and which one i must use
and is it in terminal program ?
my baseband is oK and 3G is oK how i do that solution ?
sorry for bad english

Make all wipes including fix permissions in cwm temporaly in 4.1.2, a counter going to start after fix permissions... so extract the battery, and then flash a stock jb via odin...
Sorry for my bad english

amr diab said:
Thanks God
there is a hope
but i'm sorry i can't understand this
On another device (same model and region) I did:
dd if=/dev/block/mmcblk0p2 of=/sdcard/modemfs.img.md5
Copied generated file to my sdcard and did:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
Reboot and it's done.
how i use this codes and which one i must use
and is it in terminal program ?
my baseband is oK and 3G is oK how i do that solution ?
sorry for bad english
Click to expand...
Click to collapse
If you don't have any baseband or 3g problem the steps should be:
1)downgrade to GB 2.3.6, you can try downgrading with ODIN 1.85 with 3 files (PDA, PIT, CSC) and checking the "re-partition" option (be carefull, this will erase the "sdcard0" internal phone memory!, make a backup if you have personal stuff there). If EVERYTHING works well, (even 3g and baseband) continue to:
2) flash JB 4.1.2 stock with odin (a newer one if you have it) only with PDA (without checking re-partition!) and that should work well.
If you have back ups made with CWM or TWPR: flash your custom recovery from stock recovery and then root.
Good luck!

alete89 said:
If you don't have any baseband or 3g problem the steps should be:
1)downgrade to GB 2.3.6, you can try downgrading with ODIN 1.85 with 3 files (PDA, PIT, CSC) and checking the "re-partition" option (be carefull, this will erase the "sdcard0" internal phone memory!, make a backup if you have personal stuff there). If EVERYTHING works well, (even 3g and baseband) continue to:
2) flash JB 4.1.2 stock with odin (a newer one if you have it) only with PDA (without checking re-partition!) and that should work well.
If you have back ups made with CWM or TWPR: flash your custom recovery from stock recovery and then root.
Good luck!
Click to expand...
Click to collapse
i did these things before a lot of times and i'm now on GB and everything is fine
i ca't start jellybean any more because the wizard crashes and i tried harshjelly but came without any programs like you
but your baseband was xxxx and u solved it with the modem file and everything is ok ? am i right ?
i don't have this problem how can i fix the jellybean problem ?

amr diab said:
i did these things before a lot of times and i'm now on GB and everything is fine
i ca't start jellybean any more because the wizard crashes and i tried harshjelly but came without any programs like you
but your baseband was xxxx and u solved it with the modem file and everything is ok ? am i right ?
i don't have this problem how can i fix the jellybean problem ?
Click to expand...
Click to collapse
Well. When I had that problem I wasn't sure if wizard and baseband problem was related, but both things fixed when I replaced my modemfs with one from my friend.
If you want to try the same (at your own risk), you have to:
1) have a rooted GB (there are guides all over the internet)
2) download the file: goo.gl/DzAjza (it is from company: Claro, Argentina, UBLD1, I'm sure it is not "device specific" but I'm not sure if it is "carrier specific") and put it in your phone.
3) install any Terminal app from playstore
4) in terminal write:
"su" (to get super user privileges)
and then:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
assuming that you put the file in your sdcard. (write carefully!!! you can mess it up hard if you misstype here)
then reboot and check if everything work properly, if yes, try flashing JB with Odin again and cross fingers.
Good luck!

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data

shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.

thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????

shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk

Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app

Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.

Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.

shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.

Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?

shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.

Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.

shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge

Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.

shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge

Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.

Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.