Database Develop

Should I Go Back To GB ???

Hi everyone as you can see i am a noob and have learnt everything within a month from these forums i started off by rooting my note and then i flashed the now famous repack from china and from there i have been 99% of the time using stunner but also liquid smooth. Before i flashed the chinese repack i did a backup in clockwork after all this came out about the emmc problems with the repack i used that clockwork backup to go back to gingerbread and then flashed a rootable firmware through pc odin when i checked about phone i found everything was back to normally including baseband version is back to N7000XXLB2. I managed 2 days with gb then thourght stuff this and reflashed the repack and went back to stunner( i carnt live without tablet mode 160 dpi ) and still on stunner my baseband version has not changed its still N7000XXLB2 ? My question is in my situation would you go back to gb or stay with stunner ?? Also i have bourght a jig which i have used twice to remove yellow triangle. What would you do ?

Sonic1981 said:
My question is in my situation would you go back to gb or stay with stunner ??
Click to expand...
Click to collapse
I did neither when faced with the same dilemma.
I went back to rooted GB and immediately flashed CM9, which is safe, because it is not based on the infamous Repack.
Your modem hasn't changed because not a single custom Rom contains its own radio.
You jig will do fuq all for your Note if, God forbid, it comes to the worst, i.e. hardbrick.
Not even JTag would help you then.

Thanks for the reply is there a noob style instuctions on how to install cm9 and link please lol as i will do it now ! Also i have heard ppl saying that once u have flashed the repack it changes your bootloader and theres no way to change it back is that correct ?

HELP
I have just flashed back to stock gb using pc odin and now ive got bootloop what di i do ?????

Sonic1981 said:
I have just flashed back to stock gb using pc odin and now ive got bootloop what di i do ?????
Click to expand...
Click to collapse
Try wipe data, wipe cache, wipe battery, and wipe dalvik. That works for me when I downgrade to GB too.

PeterGChan said:
Try wipe data, wipe cache, wipe battery, and wipe dalvik. That works for me when I downgrade to GB too.
Click to expand...
Click to collapse
Nobody ever says how, but one way is via stock recovery mode: Vol up, home + power at boot up. Then select wipe / factory reset.

Of course you should revert back to gingerbread unless you want to join the party with this guy: http://forum.xda-developers.com/showthread.php?p=25730932

Data corrupted

I did go back to GB and i updated to newest GB nordic and i had my phone like that in hours without root or anything...and just like that i couldnt make call and when i went to setting it says baseband "unknown" so i asked around and ppl said wipe would fix the problem, when i made the wipe i got this error " E:failed to mount /efs (Invalid argument) " so i was thinkin maybe ill make a new flash in odin and i did that after that i couldnt start the phone, its turning on but i get only on samsung logo, i can go to download mode or CWM and i can use adb from pc to the phone but i cant do anything..so i check DATAFS and tested it and its corrupted, it goes to 5 % and then its stops.
So what can i do ? Please help..

wrong threads mate...this is devt...

wrong thread n you will not get answer here

It sounds like your EFS is corrupted, Do you by any chance have a back up of it ?
Check your IMEI number, I assume it will be Samsung generic 0044xxxxxxxxxxx something like that.
This happened to me a few times on the SGS1. I tried flashing GB via ODIN, with EFS clear ticked, It worked for me but i would advise you not to do this unless you have no other solutions.

When i check my IMEI *#06# then i dont get any IMEI, its empty and now when i try to flash gb stock or ICS then i cant start the phone..i get only to logo and when i try to wipe its gettin freezed

So is the phone booting at the moment ? Can you access recovery by any chance ?
Flashing a clean stock ODIN firmware usually fixes this issue.

azzledazzle said:
So is the phone booting at the moment ? Can you access recovery by any chance ?
Click to expand...
Click to collapse
I can access download mode and "CMW" without a problem and i can use the adb too but then i cant do anything else

ok, You definitely dont have an efs backup on your sd card or PC anywhere ? I have one on mine, I didnt create it, Some ROM or kernel created it but i cant recall which one.

azzledazzle said:
ok, You definitely dont have an efs backup on your sd card or PC anywhere ? I have one on mine, I didnt create it, Some ROM or kernel created it but i cant recall which one.
Click to expand...
Click to collapse
No sorry i dont have the efs backuped up, im new on this, everything happened without any reason, i didnt do anything...but i think the data is corrupted too cuz i cant do anything, i mean before i did the first time wipe i could go in the phone but i couldnt make call but now i cant do anything then download mode, recovery mode.

Ok, Well try this:
Go into CWM recovery, Wipe Cache partition and Dalvik Cache, DO NOT DO A FULL WIPE UNLESS YOUR KERNEL IS SAFE
then,
Flash stock GB via odin, After the flash, Reboot into recovery (will be stock android recovery) and do a full factory reset.
Then reboot, The phone should boot up normally, and hopefully EFS will be restored. If the phone doesnt boot, We can explore some other options.
The EFS corruption wont be preventing the phone from booting.

azzledazzle said:
Ok, Well try this:
Go into CWM recovery, Wipe Cache partition and Dalvik Cache, DO NOT DO A FULL WIPE UNLESS YOUR KERNEL IS SAFE
then,
Flash stock GB via odin, After the flash, Reboot into recovery (will be stock android recovery) and do a full factory reset.
Then reboot, The phone should boot up normally, and hopefully EFS will be restored. If the phone doesnt boot, We can explore some other options.
The EFS corruption wont be preventing the phone from booting.
Click to expand...
Click to collapse
Thanks ill try that and ill come back to u again, one question where can i get the fixed .pit files? cuz i had before mmc problem and i need special .pit files that someone modded here.. dont remember the link..do u ?

So your note is bricked ? or do you just think it could be ?
The pit files are on this thread http://forum.xda-developers.com/showthread.php?t=1667886
Only use them if you need to and are 100% sure your phone is bricked

azzledazzle said:
So your note is bricked ? or do you just think it could be ?
The pit files are on this thread http://forum.xda-developers.com/showthread.php?t=1667886
Only use them if you need to and are 100% sure your phone is bricked
Click to expand...
Click to collapse
This brick thing was long time ago and i fixed it with flashing pit...now after 3-4 week this happened with the radio but i was on stock GB nordic and didnt have root or anything and that happened...
Edit: btw can u give me safe KERNEL

Hmm i cant format /data, its gettin freezed.
Edit: now it says data wipe complete but it still get freezed, do you think i got problems with my /data ?

Right ok, Well Im not sure how flashing the pit files work, Luckily ive never had this issue, I assume you will flash them via ODIN combined with a firmware too ?
If thats the case, use GB as its always a safe option to go back to.
Or, I heard somewhere, that you could flash the NON patched pit files and this will put your phone back into the bricked state, Then you could send it out for warranty.
Anyway, this is the end of the line for me, I dont know what to do next im afraid But let me know how you get on

azzledazzle said:
Right ok, Well Im not sure how flashing the pit files work, Luckily ive never had this issue, I assume you will flash them via ODIN combined with a firmware too ?
If thats the case, use GB as its always a safe option to go back to.
Or, I heard somewhere, that you could flash the NON patched pit files and this will put your phone back into the bricked state, Then you could send it out for warranty.
Anyway, this is the end of the line for me, I dont know what to do next im afraid But let me know how you get on
Click to expand...
Click to collapse
When i made wipe in recovery mode, the phone got freezed but then it said its complete and it took time then i clicked to restart and now it take time to restart...i get to the samsung galaxy note gt n7000 and it get freezed for a bit then the phone restart again

Im confused, Is this happening before or after you flashed the patched pit files ?
Look here for a reference http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12

Is there a way to remove the counts in adb or cmw or something if there is then i can go to service and go with my garanti.

azzledazzle said:
Im confused, Is this happening before or after you flashed the patched pit files ?
Look here for a reference http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
ive flashed with odin with stock and pit and the phone complete it and then after when it starts i get errors IU something...i do wipe and it freeze a bit then it complete then i reboot the phone and it gets freezed to logo

right i see,
So the phone is now completely stock right ? Including stock recovery also ?
if so, You can use a USB JIG to remove the yellow triangle and binary count, Thus resulting in a clean stock faulty phone of which you should get fixed under warranty.
Here's the guide on removing the binary count and triangle, you can make your own jig or buy one online. http://www.google.co.uk/url?sa=t&rc...vuz_Bg&usg=AFQjCNE_p2cZdwEpNAhP2QNPUyFYWAfmzQ
However Flashing stock firmware should have reset the binary count and removed the triangle.

[Q] Help Needed Phone stuck on N7000 screen

Phone won't boot past Galaxy Note Boot image
Phone will go in download mode by pressing Vol-Home Power buttons
Phone will go in recovery menu by pressing Vol+Home Power buttons but if i try to flash anything it shows verification error.
Anything flashed with Odin, goes successfully without any errors, but phone still won't boot past Galaxy Note boot image. When connected to PC in Odin mode USB recognised, when connected to PC with Galaxy Note boot image, USB not recognised (malfunctioning error appears)
I tried flashing ics/gb stock roms, kernels, pit files, and nothing helps
Please help
lastly
HAVE FLASHED N7000DDLC1_N7000ODDLC1_N7000DDLC1_HOME.tar.md5 using pc odin 3.04 and still stuck on gnote boot image
and lastly updated with :: N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.. but to no avail..
please help

do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom

anubis1126 said:
do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom
Click to expand...
Click to collapse
actually was on the stock ics and tried to install kingdroid by CWM.zip
and wiped data and cache from touch/temporary cwm..
then after install it got stuck on the first screen...
since then have tried to flash stock ics / gb firmwares but not getting past the first screen

first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...

it can take 5 to 10 mins after install to start however if it still goes no further and you can get into recovery can you flash any custom kernal,if you can do so then wipe and try to reflash if not i would ask dr ketan as he is awesome and may be able to help

^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!

letters_to_cleo said:
first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...
Click to expand...
Click to collapse
i was using the temp cwm used to gain root to flash .. very stupid i know..
my recovery and download modes are accessible so is my phone toast..
and if yes it is toast .. how to recover ??

letters_to_cleo said:
^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!
Click to expand...
Click to collapse
since i do have warranty on my phone left for another 2 months should i give it to the samsung repair center ?? what will they repair and how much time is expected it to repair ??

I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method

letters_to_cleo said:
I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method
Click to expand...
Click to collapse
but sadly the stock recovery is not accessing my memory card files and only internal sd and it has no option to mount storage ..
how to access the files i put in my memory card.. or should i flash some other ics stock rom as they have more options in stock recovery ??

no need to aggravate the problem by flashing another ICS... your Note's been bitten already.. don't let it bite twice...

Your last rom flashed is KL3 then have you wipe cache and data from recovery?
If not then do it, it should boot then.
Make sure last rom was flashed correctly and u are currently on KL3
If you have to press home button in recovery to enter your choice then it should be gb (kl3)rom (on ics you need to press power to select)
If wiping cache and data also not work, then flash wipe version of gb rom. If it stuck at data.img then yu have got damaged and should send to service Centre, without doing anything
Sent from my GT-N7000 using xda premium

[Q] Caught in Bootscreen loop - i9305 LTE have access to CWM! [SOLVED]

My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.

likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7

PHP:
MaHo_66 said:
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7
Click to expand...
Click to collapse
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?

likeasir said:
PHP:
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?
Click to expand...
Click to collapse
Hmm... Good question. I understand your issue here but im afraid i cant answer this.. While it was working what firmware was running on it? What baseband? If you have any kind of info of the working firmware, analyze it with firmwares on those sites and try to find the one you need.
Sent from my GT-I9305 using XDA Premium 4 mobile app

likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
Click to expand...
Click to collapse
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days

likeasir said:
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days
Click to expand...
Click to collapse
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.

likeasir said:
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.
Click to expand...
Click to collapse
Cheers on getting ur phone fixed but after wiping all directories a stock rom flash would have cleared all the problems

lol i just did this to my phone, time to find a stock firmware.

[Q] GT-I9295 Int'l wifi fails after flashing stock rom

Hi,
Here's what I did so far:
Some time ago I've installed CWM and Cyanogen 11 on my GT-I9295 Int'l.
A few days ago I flashed I9295XXUCNI1_I9295OXXCNI1_ROM (stock 4.4.2 for Romania) via Odin.All went well with the exception that Wifi can't be enabled anymore.Instead I get a security notification in the notif. drawer saying that a the action was prevented.
I flashed 9295XXUBMK3_I9295OXXBMK3_ROM.zip(stock 4.2.2 for Romania) . Issue still persists,unable to enable WiFi but there's no security notification anymore
Update:
I've also tried:
Phone factory reset
CWM factory reset
CWM clear cache
Flash stock 4.4.2
WIFI still can't be enabled,security warning shown.
Phone factory reset
CWM factory reset
CWM clear cache
Flash stock 4.2.2
WIFI still can't be enabled
With stock 4.4.2
Flashed CF-Auto-Root-jactivelte-jactiveltexx-gti9295.tar.md5
Disabled Knox - At this point I checked if WIFI can be enabled,it could not.
Installed TriangleAway and reset counter and status
Phone factory reset
Flashed stock 4.4.2
Result: Still can't enable WIFI
BASEBAND:I9295XXUCNE5
Any thoughts on what I might do next or where does this problem comes from ?
Hopefully you'll point me in the right direction on how to get back to a fully functional stock 4.4.2.
Thanks

rluncasu said:
Hi,
Here's what I did so far:
Some time ago I've installed CWM and Cyanogen 11 on my GT-I9295 Int'l.
A few days ago I flashed I9295XXUCNI1_I9295OXXCNI1_ROM (stock 4.4.2 for Romania) via Odin.All went well with the exception that Wifi can't be enabled anymore.Instead I get a security notification in the notif. drawer saying that a the action was prevented.
I flashed 9295XXUBMK3_I9295OXXBMK3_ROM.zip(stock 4.2.2 for Romania) . Issue still persists,unable to enable WiFi but there's no security notification anymore
Hopefully you'll point me in the right direction on how to get back to a fully functional stock 4.4.2.
Thanks
Click to expand...
Click to collapse
You could do a factory data reset from settings within the phone and reflash the firmware (remember to backup your internal sdcard before doing this as it will erase your internal storage). This is known to reset the phone and resolve any firmware / modem related issues.

JASONRR said:
You could do a factory data reset from settings within the phone and reflash the firmware (remember to backup your internal sdcard before doing this as it will erase your internal storage). This is known to reset the phone and resolve any firmware / modem related issues.
Click to expand...
Click to collapse
I did factory reset it and cleared the cache from CWM. Is the factory data reset from the phone any different ?
Best Regards

rluncasu said:
I did factory reset it and cleared the cache from CWM. Is the factory data reset from the phone any different ?
Best Regards
Click to expand...
Click to collapse
Yes, factory reset from within phone is different. CWM only wipes data and cache partitions while from within the phone it resets all partitions and firmware therefore it even wipes your internal storage. You could reflash the firmware after doing a factory reset and check.

JASONRR said:
Yes, factory reset from within phone is different. CWM only wipes data and cache partitions while from within the phone it resets all partitions and firmware therefore it even wipes your internal storage. You could reflash the firmware after doing a factory reset and check.
Click to expand...
Click to collapse
Thanks Jason,I'll do that later on today,see if it takes care of the issue.

JASONRR said:
Yes, factory reset from within phone is different. CWM only wipes data and cache partitions while from within the phone it resets all partitions and firmware therefore it even wipes your internal storage. You could reflash the firmware after doing a factory reset and check.
Click to expand...
Click to collapse
Unfortunately after
Phone factory reset
CWM factoy reset
CWM cache clear
Re-flash stock 4.4.2
Wifi still can't be enabled.

rluncasu said:
Unfortunately after
Phone factory reset
CWM factoy reset
CWM cache clear
Re-flash stock 4.4.2
Wifi still can't be enabled.
Click to expand...
Click to collapse
Recommend that you flash only any one entire firmware. (Once you flash entire firmware you will have stock recovery and not CWM)
Power off phone and go to download mode with power + volume down button
Flash firmware 4.4.2 through odin
Boot normally
Reboot.. & do a phone factory reset
Power off phone and go to download mode with power + volume down button
Flash firmware 4.4.2 again through odin
Reboot
Now you should have working wifi. If this does not work then maybe a hardware issue

JASONRR said:
Recommend that you flash only any one entire firmware. (Once you flash entire firmware you will have stock recovery and not CWM)
Power off phone and go to download mode with power + volume down button
Flash firmware 4.4.2 through odin
Boot normally
Reboot.. & do a phone factory reset
Power off phone and go to download mode with power + volume down button
Flash firmware 4.4.2 again through odin
Reboot
Now you should have working wifi. If this does not work then maybe a hardware issue
Click to expand...
Click to collapse
Oh,I feel so silly .
I just realized that I was using stock Roms with the wrong baseband. I had UCNE5 due to a previous install of the first 4.4.2 stock (PHN) back in may. Now was trying to install UCNE1 which is the stock rom for Romania region.
Problem solved,just flashed the proper stock 4.4.2 (...UCNE5) and everything works just fine.
Thanks a lot for all your help.
Best

rluncasu said:
Oh,I feel so silly .
I just realized that I was using stock Roms with the wrong baseband. I had UCNE5 due to a previous install of the first 4.4.2 stock (PHN) back in may. Now was trying to install UCNE1 which is the stock rom for Romania region.
Problem solved,just flashed the proper stock 4.4.2 (...UCNE5) and everything works just fine.
Thanks a lot for all your help.
Best
Click to expand...
Click to collapse
2x flashing stock TW ROM to repair?
Never seen that before as a solution.
Hard to follow when NE1 was flashed. You started in OP with NI1.
I bet you had a mismatch between bootloader and LTE-modem. The file name of LTE modem is NON-HLOS.bin and must be flashed using Odin or Heimdall.
The i9295 is responding like the i9505 when you mess with LTE modem - WiFi or sound will fail. The i9295 community is small and has no dedicated modem thread but head over to the i9505 community and gain knowledge. Start reading my post and continue with the referenced post by a acknowledged contributor:
http://forum.xda-developers.com/showthread.php?p=57200308
And please don't try to flash any of the i9505 modem or bootloaders from that thread on your i9295 - learn the boundaries, download from trusted source, and Always Power OFF before Download Mode (never use lazy reboot) .