Database Develop

[Q] Samsung Galaksy S i9000 BIG PROBLEM

Hello,
I have galaksy S and i had firmware 2.3.3 updated throuh KIES. Everything worked fine until couple days ago. When i turned on phone it said that i have to clear cache and EVERY PROGRAM HAD AN ERROR ...process has stopped working etc. etc. I cant do anything with it. I Flashed it with 2.3.5 SAME THING i flashed it with almost all firmwares SAME THING. I did master reset and hard reset couple of times in 3 different ways and after rebooting phone ALL APPS STYS AND ALL DATA STAYS FROM BEFORE ofcourse non of the apps work. I have to go to service and use waranty for it but is there any help?! I googled the problem found a lot of topics which had totaly the same problem and the guys didnt know what to do. I did everything but nothing worked. I appreciate any help. Thanks for the answers you are my last chance!
Greets
Alen

This may sound stupid but you didnt say athing about it.... Did you actually clear cache?
Start the phone with 3 button combo (vol up + home + power) you will enter recovery menu, select wipe cahe there

Yes i did all of the above. I tried clearing the cache wiping data/factoriy reset over recovery mode. I tried factori reset through OPTIONS/PRIVACY and i tried factory reset through keycode *# etc....

Did you flash through Odin? What settings did you use?

ro4sho said:
Did you flash through Odin? What settings did you use?
Click to expand...
Click to collapse
Yes. I flashed through the Odin a couple of times with couple of settings. Settings were mostly RE-PARTITION checked, AUTO REBOOT CHECKED AND F. RESET TIME checked. That is it.PDA, PHONE and CSC files includeed in firmware afcourse. With pit file. One question. What is the difference between pit 512 and 803? Which pit did i have when i bought the phone?

I personally would remove sd card and sim card ( MAKE SURE YOU DO AS IT WILL WIPE THEM), boot to recovery using the 3 button method, mounts and storage, format/sdcard then wipe cache, factory wipe then pull the battery off, boot to download connect to odin and do a new flash using a pit 512, PDA,PHONE and CSC. This should stick your phone back to almost factory depending on what version of android you flash. If you want a good customizable rom with fantastic battery life, then I recommend the galaxydroid 3.3, (not the 4.0 as you lose half of the toys)
Follow this:-
http://forum.xda-developers.com/showthread.php?t=1344489
Give that a bash and report if it helps, cheers bud

buttwad said:
I personally would remove sd card and sim card ( MAKE SURE YOU DO AS IT WILL WIPE THEM), boot to recovery using the 3 button method, mounts and storage, format/sdcard then wipe cache, factory wipe then pull the battery off, boot to download connect to odin and do a new flash using a pit 512, PDA,PHONE and CSC. This should stick your phone back to almost factory depending on what version of android you flash. If you want a good customizable rom with fantastic battery life, then I recommend the galaxydroid 3.3, (not the 4.0 as you lose half of the toys)
Follow this:-
http://forum.xda-developers.com/showthread.php?t=1344489
Give that a bash and report if it helps, cheers bud
Click to expand...
Click to collapse
Thanks man. I will report tomorrow. I hope it works! Thanks again!!!!!!!!

Sasmung123 said:
Thanks man. I will report tomorrow. I hope it works! Thanks again!!!!!!!!
Click to expand...
Click to collapse
One more question. If i do what you told me to do and i revert to Firmware 2.1 will i be able to use waranty nad told them that i didn't touch the phone firmware or am i in deep s**t?!

resolve
Did you resolve your problem?
If not, did you try to flash it via ODIN or heimdall?

NOT SURE
Hi, I want to ask you all if i do all of the above firmware flashing etc.. will i be able to use waranty after that if flashing doesn't works for me?

Well if you flash a stock firmware for your region they won't be able to tell any difference.

You made mi day man! Greets bud!

Stuck at "touch the android to begin"

This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.

I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!

It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc

Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?

Just wipe both cash and user data, and reboot.

reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did

Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks

liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics

I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy

But its not wroking for me

[Q] Please Help

I upgraded to ICS with mobile ODIN method described in development forum and everything went OK, ICS was there and working OK. Then i did factory reset and that also went ok, then i did backup with clockwork mod an decided to restore my old gingerbread ROM because I haven't got tim to play with ICS today. Then everything went wrong. While restoring Gingerbread ROM my note just reseted itself and could not boot pass galaxy note letters. Then tried to get him in download mode and succeded to flash it with factory KJ1 rom, but when it booted, it's just not working. It's stuck in Welcome to GT-N7000 (touch the android icon to begin) screen, and just inform me that some of the services could not be started. When i touch android icon nothing happens. Is there a way to repair this an can anibody tell me what happened?

Take your battery out, wait for 1 minute.
Put it back in, boot into CWM (Volume up + Home + Power)
Do a factory reset.
Reboot.

I don't have cwm anymore because i flashed factory kj1 rom with odin from my PC

imagio1 said:
I don't have cwm anymore because i flashed factory kj1 rom with odin from my PC
Click to expand...
Click to collapse
You will still have stock android recovery. Go wipe cache and format data there and reboot.

Thanks very much, it did work, I really am a noob

I9305t 4.3 wont boot

HI all,
Today I decide to update my i9305t to the 4.3 rom. I unrooted my phone and reset the custom counter and all was good. I flashed the telstra rom and all was good. Because of the locked dock Icons I thought I would flash a different unbranded rom. During the installation (via odin) it went skew if and froze. It sat there for ages but I ended up having to do a battery pull.
When I went to the download menu on the phone, knox had been tripped and there was 47 instances. Any way I reflashed the telstra firmware. It passed but now the phone gets stuck on the Samsung logo.
OK now I have already.....
Pulled the battery.
Removed all cards sim and sd.
Restored different firmwares.
factory reset, clear cahce etc.
Installed custom recovery and cleared devalk cache.
Googled for similar events.
Nothing I have read has worked.
I cant think of what else to do. When I restore a firmware via odin everything is OK, it passes but on the reboot it just stops at Samsung logo and goes no further.
I gather that because the phone can still get into recovery and download mode there must be something can sort this out.
Thanks in advance.

flash the original firmware from samsung.....the 4.3 since you updated it...
after it finishes and reboots it will enter a boot loop....IT'S NORMAL.....pull out the battery and start the phone in recovery mode(stock one) and do a wipe data - factory reset and wipe cache partition...it should work without a problem...did this many times...
after you updated to 4.3 you should have done a full wipe...

spiderman07 said:
flash the original firmware from samsung.....the 4.3 since you updated it...
after it finishes and reboots it will enter a boot loop....IT'S NORMAL.....pull out the battery and start the phone in recovery mode(stock one) and do a wipe data - factory reset and wipe cache partition...it should work without a problem...did this many times...
after you updated to 4.3 you should have done a full wipe...
Click to expand...
Click to collapse
Yeah I have done that. I have tried it about 10 times. Im going to give it another bash today as I am stuck using my wife's old Iphone and its horrendous.

try installing your firmware with a .PIT file and check repartition box...search for the pit file....
if this doesn't work i suggest going to local repair shop and let them have a look...
maybe something got broke when you flashed the unbranded firmware...

spiderman07 said:
try installing your firmware with a .PIT file and check repartition box...search for the pit file....
if this doesn't work i suggest going to local repair shop and let them have a look...
maybe something got broke when you flashed the unbranded firmware...
Click to expand...
Click to collapse
Thanks for the info. Im unsure what a PIT file is. Are they phone specific or just model specific.
Cheers
Pat

Filipiak said:
Thanks for the info. Im unsure what a PIT file is. Are they phone specific or just model specific.
Cheers
Pat
Click to expand...
Click to collapse
Found the pit file and read up on it. Tried to use it but it fails as soon as it starts.

Best of luck
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
Click to expand...
Click to collapse
Knox was tripped when the firmware install crashed. So knox tripping is no issue. Thanks for the information. I will have a go tommorrow.
I did manage to restore a cm9 backup but my IMEI is now gone and I cant get to the menu to restore my back up. Seems like Samsung has done a number on my phone. In all the years ive been fingering phones with custom firmware and modding I have never had anything stuff up this bad. Its rather amusing that it has happened flashing a stock rom that belongs to my phone.

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
Click to expand...
Click to collapse
AMoizK you are the ****en man. Worked. The part that worked for me was the format everything. IMEI restored as well. Phone is perfect. Now i dont need to use my wifes crappy old iphone.
WOOT!!!!

Filipiak said:
AMoizK you are the ****en man. Worked. The part that worked for me was the format everything. IMEI restored as well. Phone is perfect. Now i dont need to use my wifes crappy old iphone.
WOOT!!!!
Click to expand...
Click to collapse
Cheers

Filipiak said:
HI all,
Today I decide to update my i9305t to the 4.3 rom. I unrooted my phone and reset the custom counter and all was good. I flashed the telstra rom and all was good. Because of the locked dock Icons I thought I would flash a different unbranded rom. During the installation (via odin) it went skew if and froze. It sat there for ages but I ended up having to do a battery pull.
When I went to the download menu on the phone, knox had been tripped and there was 47 instances. Any way I reflashed the telstra firmware. It passed but now the phone gets stuck on the Samsung logo.
OK now I have already.....
Pulled the battery.
Removed all cards sim and sd.
Restored different firmwares.
factory reset, clear cahce etc.
Installed custom recovery and cleared devalk cache.
Googled for similar events.
Nothing I have read has worked.
I cant think of what else to do. When I restore a firmware via odin everything is OK, it passes but on the reboot it just stops at Samsung logo and goes no further.
I gather that because the phone can still get into recovery and download mode there must be something can sort this out.
Thanks in advance.
Click to expand...
Click to collapse
It happened to me once, i found that 4.3 won't boot if baseband and imei are unknown. when you were trying to flash with odin and your phone got stuck it probably has damaged or ( erased ) your imei partition. try flashing 4.1.1 ( the package file without bootloader files ) it will definitely work for you. the reason is simple , Samsung's stock 4.3 never boots if the imei is corrupt or unknown (baseband is then usually too ) so, flash 4.1.1 , root your phone and install Persus kernel +any modem / baseband file, this is the only solution as i dont know how but does repair your imei , but you will be stuck at 4.1.1.

[Q] Caught in Bootscreen loop - i9305 LTE have access to CWM! [SOLVED]

My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.

likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7

PHP:
MaHo_66 said:
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7
Click to expand...
Click to collapse
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?

likeasir said:
PHP:
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?
Click to expand...
Click to collapse
Hmm... Good question. I understand your issue here but im afraid i cant answer this.. While it was working what firmware was running on it? What baseband? If you have any kind of info of the working firmware, analyze it with firmwares on those sites and try to find the one you need.
Sent from my GT-I9305 using XDA Premium 4 mobile app

likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
Click to expand...
Click to collapse
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days

likeasir said:
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days
Click to expand...
Click to collapse
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.

likeasir said:
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.
Click to expand...
Click to collapse
Cheers on getting ur phone fixed but after wiping all directories a stock rom flash would have cleared all the problems

lol i just did this to my phone, time to find a stock firmware.