Related
Hi everybody, new to the forums and new to droid - I recently upgraded from the Propel to the Captivate and so far I am loving it. With all the reviews and forums I read before deciding to buy most of my answers have been answered, but not all.
My phone was loaded with 2.2 and when I registered it with Samsung it showed a build date of feb/11 so I'm hoping that my phone has alot of the big fixes already loaded. I have noticed that the gps code listed on this thread
http://forum.xda-developers.com/showthread.php?t=732030
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
I don't plan on rooting or flashing my phone for a while... yes yes I know, stock sucks, but like I said I was using the Samsung Propel a couple days ago and now the Captivate - I've got alot to learn and alot to get used to before I switch things around. Yes, one day I do want to switch off of stock software just not right now, thanks for the suggestion though. lol
Model SGHI897
Firmware 2.2
Baseband I897UCKB1
Kernel 2.6.32.9
froyo.uckb1
thanks in advance for the help and advice, now it's time to finish reading through the app thread and hit up the store...
psynonamous said:
Hi everybody, new to the forums and new to droid - I recently upgraded from the Propel to the Captivate and so far I am loving it. With all the reviews and forums I read before deciding to buy most of my answers have been answered, but not all.
My phone was loaded with 2.2 and when I registered it with Samsung it showed a build date of feb/11 so I'm hoping that my phone has alot of the big fixes already loaded. I have noticed that the gps code listed on this thread
http://forum.xda-developers.com/showthread.php?t=732030
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
I don't plan on rooting or flashing my phone for a while... yes yes I know, stock sucks, but like I said I was using the Samsung Propel a couple days ago and now the Captivate - I've got alot to learn and alot to get used to before I switch things around. Yes, one day I do want to switch off of stock software just not right now, thanks for the suggestion though. lol
Model SGHI897
Firmware 2.2
Baseband I897UCKB1
Kernel 2.6.32.9
froyo.uckb1
thanks in advance for the help and advice, now it's time to finish reading through the app thread and hit up the store...
Click to expand...
Click to collapse
As for needing a GPS on without using Data there are a few but to be honest if you need it for reliable GPS, then you got the wrong device. The captivate is known for having terrible GPS and it is unrelible at best. Good enough to help you learn a new town but not good enough to get you where you need to go on time everytime. The led are the light sensors. No led Notifications with the captivte at all unless you rom a custom rom and get BLN from the app store that will light up your 4 bottom keys when you have a message.
I do have a stand alone gps, I was just hoping I'd be able to free up some pocket space with the phone - so far, it just shows a blank screen with a blue indicator and says it's accurate 'within 10 meters'. I was hoping I could find a app that provided maps and maybe help tune it a bit. Next time I'm on the network I'll play around with it and see what kind of readings it gives - even if the gps is low end, I'm still liking this phone so far... a whole lot better than the propel.
Thanks for the update, zelendel
google "android app navigation preloaded maps"
psynonamous said:
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Click to expand...
Click to collapse
Try using *#*#3214789650#*#* for the dialer code.
psynonamous said:
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
Click to expand...
Click to collapse
One is a proximity sensor and one is a light sensor.
Thanks for the info, I got a couple gps test apps I'm going to mess around with in a while but, I found a new problem that is driving me crazy...
I bought a usb wifi adapter - Asus n13 (b/g/n), in the hopes of using my internet for data and my phone will not connect to wifi. Even driving around town to places that offer free open wifi, my phone will not connect. It finds the wifi hotspots, pulls up the ssid, says connecting, then gets to 'assigning ip' and freezes. On my pc wifi setup, it shows a new connection and 2 seconds later disconnect.
In the phone wifi settings, it keeps showing wifi -connecting....disconnected, back to scanning, connecting in an endless loop - but it never connects. It has the ssid remembered but I cannot delete it or reset it. WPS failed to connect from either end.
Sleep Policy is off
Use Static IP is off
This is a big issue for me since I'm on the cheap att data plan.. I've tried various settings on the pc side of things, all with the same results, I've browsed the internet and done a bit of troubleshooting (ie, different usb ports, different drivers, turning on/off services, etc etc) - I think the problem is on the phone since it does not access any wifi... maybe I missed a setting somewhere?
For now I'm going to dig through the user manual again...
OK, playing around with some of windows wireless settings I've hit a new roadblock... my phone says connecting... Obtaining IP address... Disconnecting... Scanning...
That is one small step closer I think, because it wasnt trying to get an ip address earlier, it was just connecting/disconnecting.
finally! I figured it out!!!
Just for future note.... You have to go into your windows network settings, highlight your broadband AND wifi together - select bridge... restart your pc wifi software and then connect your phone, it should start right up!
psynonamous said:
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Click to expand...
Click to collapse
You say you do not want to root the phone. But try Launcher Pro anyways to access the LbsTestMode.
1. Sign up/in to the market.
2. Download and install Launcher Pro (it says Pro but there is a FREE version, so dont worry).
3. After install, go to home screen. Long press and choose "Shortcuts"
4. In menu, choose "Activities" (yellow icon).
5. Scroll down and expand the menu "LbsTestMode". Under this is a submenu. Choose the first "LbsTestMode" under this. Yes the main menu and submenu have same name.
6. Choose Ok or whatever, and the icon will be on your Home screen.
7. If you get this far, then you are good.
Open LbstestMode:
1. At the moment you probably should just leave Application Settings to default.
2. Under "Supl/CP settings". And change as follows:
Server: supl.google.com (no "www.")
Server Port: 7276
Secure Socket: OFF
AGPS Mode : SUPL
3. Return to previous menu.
4. DELETE GPS DATA just to clear all previous data.
5. Run "Get Position Test" on top of menu.....
Good Luck !!
psynonamous said:
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Click to expand...
Click to collapse
Yeah, Google Maps requires a network connection.....BUT when you go into Navigation mode - via the Directions menu and turning on navigation, you get navigation. YOU NEED TO DOWNLOAD VOICE SYNTHESIS from the market to get voice guidance. This a good first try, IF YOUR GPS WORKS !!
Or try NAVIGON for Android ....you can buy it but also check here www.mobilism.org (ahem..ahem). I use daily, and I think it is the best routing....
EDIT: Well...about google maps, I think you need a data connection jsut to open the damn software, so you will need Navigon, Igo primo or similar...I AM ASSUMING YOU WANT ROUTING DIRECTIONS and not hiking type positioning. Then take a look at this http://www.backcountrynavigator.com/content/android-gps-software AND here http://www.backcountrynavigator.com/
Thanks again for the updates, but it seems like either Samsung or ATT has locked out the Lbs Test mode feature, both of the codes have the same result - after entering the last character it clears it out. I did get LauncherPro and am really digging it so far, but even the lbs tests dont do anything, it goes to a blank screen and just sits there... I have the status bar at the top and a totally blank screen. I even set my phone down on a box out in the yard for 30+ minutes and nothing ever came up - using the google and stock settings for the test. I'm guessing if/when I root my phone the tests will work
I started using GPS Test from Chartcross Limited and GPS Status from EclipSim - both show that my gps is accurate between 16.4 and 32.8 feet - depending on which the way the wind is blowing. I've been browsing some of the other gps/map apps but for now I'll just carry around my standard gps when I need it.
Even with the gps issues, I'm really liking this phone alot. I havent really ran into any other problems yet
Unfortunately since I installed GB stock rom my GPS apps don't find satellites at all. Anybody knows a fiy for this? it worked perfectly on froyo.
Sent from my LG-P990 using XDA Premium App
For me "GPS status" (market) helps in these situations (topogigi says the following in the FAQ of his thread, but it should work for you as well):
"If you want a quick fix, you have to sit down in an open space with a large slice of visible sky above you. You should have already installed on your phone a really valuable app called "GPS Status". You haven't got it? Fire up the Market, search it and install it: it's free for everyone. Then turn off wifi and turn on wireless data. Ephemeris data download and position data based on cell triangulation are available only with wireless data enabled and they are inhibited by a special setting in the gps configuration file when wifi is on. Tap the app icon, then look at the status bar: is there a small icon radar-shaped blinking on the status bar (upper part of the screen)?
CASE 1) Yes, I see it! It's blinking continuously!
CASE 2) No, nothing changed.
If your fall in CASE 2, there is really something wrong with GPS on your phone. You can try the following workaround, but if it doesn't work there's no remedy other than filing a bug alert in the thread and patiently wait until the bug will be solved.
WORKAROUND:
- Enter Hidden menu typing 1809#*990# on the phone pad
- Select "GPS Test"
- Go to "SULP Settings" and create a new SLP Server with the following parameters:
name: Nokia
slp address: supl.nokia.com
port: 7275
leave certification file and TLS settings as blank
- go back, and flag "SLP Auto provision" as enabled
- select your APN for SLP from "APN Settings"
- go back 2 times and select "Get position"
- select menu-> start
- at this point, you could notice that no satellite appear. Dont't worry, carry on....
- select menu-> Settings then change some parameters as "Session Type" and "Oper Mode"
- go back and select Stop and Start again
- repeat the last three steps until you get a fix and the gps icon in the status bar remains steady after the fix.
If you fall into CASE 1), look at the yellow bars indicating the number and the signal level of each satellite. When the bars will be more than 4 and the length of each bar will be enough to get a fix (the longer the bars, the stronger the signal), the bars will turn into green and you have got the first fix (how lucky you are, huh?). The time it will take is not fixed, though: it depends on weather, correct download of ephemeris data, radio interferences and so on. So, the bottom line is: BE PATIENT! There is no rule of thumb for measuring the time a fix will take. In some conditions, you will get it in a few seconds, in other conditions it will take minutes. Now that you've got a fix, try to move a little bit around. The radar-shaped icon should be steady now and the bars should remain green. If you see the icon disappearing after the fix, you are falling into CASE 2). Try the workaround mentioned before and if it fails, file a complaint into the thread.
DO NOT FILE A BUG ALERT ON GPS WITHOUT HAVING ALREADY TRIED ALL THE PROCEDURES LISTED ABOVE! It will be simply ignored."
Your device is rooted? Then you could try this with CWM: http://forum.xda-developers.com/showthread.php?t=1066933
Ive had this problem too, on Stock GB ROM.
what I did was installed the 2.1.6 MIUI ROM and edited the GPS settings from there.
The settings I copied was from a Nexus ONE MIUI ROM.
Now it works like a dream.
Thanks for the answers I'll try gps status
Sent from my LG-P990 using XDA Premium App
And no surprise I have got this issue to, since I updated the stock rom (oh joy, thank you so much LG). However, it would get a lock, then drop the lock (within seconds) then search again for a few minutes.. get a lock maybe.. then drop it within seconds.
Now today in the open air, I cannot get a lock.
So.. I downloaded "GPS Status & Toolbox" and because I cannot stand adverts.. I donated the small amount for the program patch to remove adverts ('GPS Status Donation').
I'm now just running this on my phone (but by a window.. to try and get a lock).
Hopefully I can get it working
Many thanks for the tip, I'll let you know either way #
EDIT: Well... it seems I may have been hasty, as I just turned off the wifi and I think that was stopping the GPS from working lol. But anyway.. is there a hack to get the wifi and GPS working together?
hi
I had the same problems as you, with GPS (and some other) issues - I have always been on stock Rom.
then I got fed up with this and decided to try Temasaks Cyanogenmod7 Kang ROM last week - and have not looked back since!
GPS is working within seconds, new cool lock screen, and everything is running much more fluently! Other problems I had are also gone.
battery time is equal or better, as stock!
/René
Well... I don't know what I've done... some fiddling with the GPS options in the hidden menu, and now it is working flawlessly.
Also... I'm on the google supl, and not the nokia one... and it still works fine.
I have made some other changes anyway.. but regardless it basically just seem to take some fiddling with it to get it to work. I now get locks within about 5 to 10 secs even indoors (10 sats seen, 6-8 locked INDOORS!). Hopefully that won't change if I reset the phone.
My settings are:
GPS session type: 'Tracking' (not single fix)
Oper Mode: MS-Based (to help with initial lock, but then use GPS completely)
Horizontal Accuracy: 30 (Stock was 50.. I think this is in metres)
SLP Auto Provision: Enabled (I don't even know what this means!!? lol)
SLP Server Setting: OPEN(Google) (Although I added the nokia one as well)
Auto Cold Start: Disabled
UPDATE: You know what... I thought it was working... so I reset my device with GPS off. When it came on, I tested GPS, and it showed that it was working and see's the satellites. BUT.. in GPS Status Tool, I see that the GPS symbol dissappears, and the 'update' time does not update. So basically.. it's relying on the cell towers rather than the GPS towers. I turned the phone off with GPS enabled... turned on again, and now it's working correctly with GPS doing it's thang. AFter my experiences in being in an office with a terrible signal... I reckon that there is a setting in the code somewhere that doesn't allow the GPS to be used, or it's forcing it to only use tower's and wifi as a means of location, and ignoring the GPS. Very odd. But it works now, as everyone has seen, it's just a shame that what really is quite a fundamental feature of the phone, LG decided not to fix.
It works,thanks. It is wery cloudy but i got gps in 15sec
Sent from my LG-P990 using XDA App
try this too,
turn on your GPS.
reboot your phone (with GPS ON)
try again. see if it can lock faster.
sigelopisan said:
try this too,
turn on your GPS.
reboot your phone (with GPS ON)
try again. see if it can lock faster.
Click to expand...
Click to collapse
That's what I suggested in the update. It's obviously a flaw in the code (thanks LG) that you have to turn the phone on with the GPS enabled for it to work. Now major issue really to leave it enabled anyway, hardly takes any power when not in use, I just wish I knew why this was the case, that you have to have it enabled at power on time. Bizarre.
It's not about being able to 'get a lock', it's about it working at all. If you use GPS status, you will see that it can see satellites and attempt to get your position.. but I reckon what it thinks are sat's are actually the cell towers (When you haven't enabled GPS at boot time).
I was using stock V10G rooted, with nova kernel and GPS Fix.
everything was fine but that rom was a bit slow, so i was testing sometimes marvel since v5, only for a few hours just to see performance differences.
When marvel v8 came out, i installed it among with all my new applications from scratch.
I did not use viber and skype yet, so i was closing/opening wifi just to see how far i can go with my battery.
When i found out that battery life was good enough for my needs, i chose in wifi settings to "never" turn off when screen is locked... having all the time my wifi enabled.
The issue appeared, when i was going from home to my office.
At home, my cellphone was connected all the time even when screen off, viber/skype calls incoming anytime... but when i was going to my office, phone wasnt connecting automatically on the new router...!!
Everytime im going from home to work or from work to home, i have to turn on my screen, wait a few seconds and it connects. Sometimes it doesnt connect but only does it when i open wifi settings. Just open settings without touching anything!
Noticed that everytime that happens, it has the old location wifi signals aqquired... and when i open settings after 1 - 2 seconds it refreshes back to the new location and connects.
Anybody has a clue about what's going on?
I've tried stock ROMs / Zeus rom / Marvel rom without success.
Does the secret menu has any settings that might help?
Does it have to do with hardware failure? (no other problems, works like a charm!)
How can i give a logcat to someone who wills to help?
First of all I think this is a question thread so it should go to q&a subforum
You should select "turn off wifi when screen off" setting. Its better for your battery, I've never had that problem when I select that setting but I'm using cm7 the only time it was when the driver had a problem but after the fix now everything is good.
about logcat you can use alogcat app in play store.
FDN
apologies for wrong category posting
My head was about to explode from whole day's work + this frustration
I know that wifi policy to turn off when the screen does, saves battery, but i'd rather charge it everyday and have viber / msn open almost all the time. Let's overlook that though, because i'm in need to have wifi always on and connected when able to (that's the reason of this topic)
I'm gonna try to capture a log and post it... if that helps
are you sure it is not router related? have you tried the same "always ON" option, while in connection with other routers?
Yes of course i have the "always ON" policy of wireless settings menu.
It's not router related, because in the past, 2.2 stock rom, was working flawlessly.
Besides, since then there are no router settings changed! (Both have the same settings since installed)
The thing is, that under Menu -> connectivity -> wifi , the list is not updated if phone is in sleep mode with locked screen.
When i change my location in example and go to my office, it doesnt connect and ONLY does it when i navigate at wifi settings, while the menu refreshes at that exact time it's list with available access points.
Okay, some feedback about this
(i dont see anyone having this issue? Or noone didnt bother about checking it? :S)
I've done many times a factory reset, rom change, etc... that didnt solve my problem.
"Played" with any configuration file regarding power saving settings, wifi settings, etc.
Let my cellphone chill the f*ck out, without battery in for a day LOL
Finally, i rollbacked, at 2.2 official unrooted (V10G).
Changed ALL possible combinations of my 3 routers having stored in wifi settings!
n o t h i n g c h a n g e d !
When phone is in sleep and changes location, doesnt auto-connect in any of those wireless routers! It only does when i get to wireless settings which refreshes the list, or wait with screen on randomly from a few seconds or till infinite (never).
So, last week, 1st June 2012 i've spoken with LG customer care, arranged a courier transfer for service (not in my city) and waited till 6th june when they sent back my phone.
The authorised service, which does the job for LG phones in Greece reported:
"Wifi turns off when screen off, due to power saving policy"
O, RLY you idiots??? Dont you think i dont know it, or i didnt mentioned that on that f*ckin A4 sized page i've typed out to explain CLEARLY my problem?
Or you think im a retard??
Of course, wifi policy is set to "Never"
LG authorized service center (3rd party company) is totally crap.
I'm going to send the phone again tomorrow.
If they still dont fix the issue, then i'll demand a sure fix the hard way!
So I've searched around a bit and not really found anyone else having this issue... Is it just me or is no one complaining?
The Bluetooth connection shows to be solid on the phone "connected, running sync loop" shows in the notification bar and the little connection lost cloud is not displayed on the watch.
However, notifications will not push and if I try to initiate a voice command it spins for while and then tells me that it is "unable to reach the Google server" turning Bluetooth on and then back off will rectify the issue temporarily. And... To make things more complicated it will randomly happen a lot one day and hardly at all another day ( of course it always acts up when someone starts asking questions about the watch and wants a demo, which in turn makes you look like a gullable early adopting fool.)
I'm currently using a gear live with a nexus 5 running the latest stable build of cm11. Ive also tested with and without WiFi enabled, because I thought I noticed a correlation but there seems to be none.
Is it me? Am I doing something wrong?
mstrpeter said:
So I've searched around a bit and not really found anyone else having this issue... Is it just me or is no one complaining?
The Bluetooth connection shows to be solid on the phone "connected, running sync loop" shows in the notification bar and the little connection lost cloud is not displayed on the watch.
However, notifications will not push and if I try to initiate a voice command it spins for while and then tells me that it is "unable to reach the Google server" turning Bluetooth on and then back off will rectify the issue temporarily. And... To make things more complicated it will randomly happen a lot one day and hardly at all another day ( of course it always acts up when someone starts asking questions about the watch and wants a demo, which in turn makes you look like a gullable early adopting fool.)
I'm currently using a gear live with a nexus 5 running the latest stable build of cm11. Ive also tested with and without WiFi enabled, because I thought I noticed a correlation but there seems to be none.
Is it me? Am I doing something wrong?
Click to expand...
Click to collapse
All righty then, I guess its me
mstrpeter said:
So I've searched around a bit and not really found anyone else having this issue... Is it just me or is no one complaining?
The Bluetooth connection shows to be solid on the phone "connected, running sync loop" shows in the notification bar and the little connection lost cloud is not displayed on the watch.
However, notifications will not push and if I try to initiate a voice command it spins for while and then tells me that it is "unable to reach the Google server" turning Bluetooth on and then back off will rectify the issue temporarily. And... To make things more complicated it will randomly happen a lot one day and hardly at all another day ( of course it always acts up when someone starts asking questions about the watch and wants a demo, which in turn makes you look like a gullable early adopting fool.)
I'm currently using a gear live with a nexus 5 running the latest stable build of cm11. Ive also tested with and without WiFi enabled, because I thought I noticed a correlation but there seems to be none.
Is it me? Am I doing something wrong?
Click to expand...
Click to collapse
That happened to me a couple of times too, but the watch usually had the cloud connection symbol thing while my phone said "connected, running sync loop." Turning bluetooth on and off and/or hitting the connect/disconnect button in the android wear app fixed the problem, but it seems to happen again whenever I leave the phone away from the watch and the BT connection is lost. It's doesn't seem to regain the connection on its own.
Is this is a CM11 problem, though? I also have CM11 (nightlies and milestones) and I had the same issue with my pebble watch. I'm thinking of going stock to see if it fixes the problem.
Komodo Rogue said:
That happened to me a couple of times too, but the watch usually had the cloud connection symbol thing while my phone said "connected, running sync loop." Turning bluetooth on and off and/or hitting the connect/disconnect button in the android wear app fixed the problem, but it seems to happen again whenever I leave the phone away from the watch and the BT connection is lost. It's doesn't seem to regain the connection on its own.
Is this is a CM11 problem, though? I also have CM11 (nightlies and milestones) and I had the same issue with my pebble watch. I'm thinking of going stock to see if it fixes the problem.
Click to expand...
Click to collapse
The thing that gets me is how inconsistent it appears to be. My phone is always in my pocket, and the cloud "disconnected" icon never appears.
however the link is clearly broken. I may do a wipe and install AOSP. I hope that is not the issue, ive really been enjoying the theme engine in cm11 along with all of the other customizability features
mstrpeter said:
The thing that gets me is how inconsistent it appears to be. My phone is always in my pocket, and the cloud "disconnected" icon never appears.
however the link is clearly broken. I may do a wipe and install AOSP. I hope that is not the issue, ive really been enjoying the theme engine in cm11 along with all of the other customizability features
Click to expand...
Click to collapse
I had the same issue with my nexus 5 running CM11. Two or three times throughout the day my watch would just stop receiving notifications, but it would still say it was connected. Often I noticed it because when I went to give it a voice command it would not register and then say it was disconnected until I swiped away the notification. I've just flashed over to Omni ROM to see if that fares better, since I'm pretty sure the issue was mainly with CM11 on this phone.
freekyfrogy said:
I had the same issue with my nexus 5 running CM11. Two or three times throughout the day my watch would just stop receiving notifications, but it would still say it was connected. Often I noticed it because when I went to give it a voice command it would not register and then say it was disconnected until I swiped away the notification. I've just flashed over to Omni ROM to see if that fares better, since I'm pretty sure the issue was mainly with CM11 on this phone.
Click to expand...
Click to collapse
Well I swapped to omnirom as well and sure enough, operation has been perfect. I also noticed while looking at obd2 apps that one had mentioned bluetooth connectivity issues on CM...
so i'd say, SOLVED.
My io2014 Samsung gear live won't connect to a new nexus 7 WiFi running 4.4.4 stock ROM.
Worked forma while, then flaky, nowmseems like zero connectivity.
Reset everything (on the watch and AR app), now it just won't pair.
jeffcrilly said:
My io2014 Samsung gear live won't connect to a new nexus 7 WiFi running 4.4.4 stock ROM.
Worked forma while, then flaky, nowmseems like zero connectivity.
Reset everything (on the watch and AR app), now it just won't pair.
Click to expand...
Click to collapse
The same exact thing is happening to me, just one day started to get in a "Pairing Loop" continually asking me to pair the watch to my phone. Upon pairing successfully and syncing some notifications the connection gets broken and immediately a new parigin code appears.
UPDATE:
I'm back on cm11 and everything is working properly. The problem is not the ROM, its the Kernel that comes baked in. Currently using elementalX Kernel and no issues.
Hello all!
I must say, this watch is a very nice toy to play with and very handy in meetings! I have used the watch for a few days now, but I (only) have 2 issues to be solved which I cannot seem to find the answer yet:
1. The watch is connected to my phone OK (all notifications come through all the time). However, when I say "OK google" and then for instance "show me my steps" or "show me the weather", it will go to a screen saying me the connection is offline (white logo on blue background on the top of the screen). When I dismiss that message, I see that my connection is still OK! Weird .... this happens to me practically 80-90% of the times .... on a very rare occasion it succeeds to show me the info I want. By the way, my internet connection is OK at that time.
2. I have my phone also connected with BT to my Volvo V40 (2013). However, with the watch also on BT, the carkit of my Volvo is now almost useless as the voice is completely messed up (from the caller to me, and from me to the caller), sounds very intermittend or something. It seems like the BT connection is not happy with having 2 devices to be connected at the same time. My phone is an iNew V3 ... could it be something with BT profiles or versions?
I have already tried to reset the watch, re-install wear on my phone, deleted the dalvik cache (phone), un-installed apps, but no luck. Anybody have a clue on the above?
Maybe your Wifi/3G connexion is in sleeping mode and is too long to unsleep ? the watch can not connect so quickly ?
You sound like having BT reception issues on the phone. This behaviour might be triggered by the bluetooth interface itself (on the phone - bad design) or by bad drivers (also on the phone) or by interferences from the wifi module. Is your wifi on all the time?
Regular wifi is on 2.4GHz, the same frequency as BT. Wifi, however, uses more Rx/Tx power compared to BT so, under certain bad antenna designs, WiFi can just mess-up BT.
On my phone (Z1C) is the other way around: having BT ON will cause bad performance on 2.4GHz WiFi .... so I just stopped using the 2.4 band for WiFi.
Give it a try, Worst case scenario: use another phone.
Hi guys,
Thanks for the reply. About the first idea ... well if I have my phone on the charger and already switched on, it still happens. So there I assume the 3G / wifi connection is already on and this issue will not be due to the delay of switching the data connection on. Am I right?
Second option: my wifi is switched on all the time, you are right. I will try to experiment a little bit with it, let's see if that will make a difference. And, changing the phone ... hmmm well that would be a very high impact of course. My iNew V3 actually works very well ...
I am still a bit struggling with accepting it is my phone causing this issue ... only with the voice regocognition I have this issue ... with all other commands and apps the connection is OK! Only with the "OK google" option it says "offline" ... and immediately (I do not see the colored circle). To me it looks more like a but in the software or something, but after 3 resets of the device I also cannot believe that ...
Any more options? Thanks!
Troxelke said:
Hi guys,
Thanks for the reply. About the first idea ... well if I have my phone on the charger and already switched on, it still happens. So there I assume the 3G / wifi connection is already on and this issue will not be due to the delay of switching the data connection on. Am I right?
Second option: my wifi is switched on all the time, you are right. I will try to experiment a little bit with it, let's see if that will make a difference. And, changing the phone ... hmmm well that would be a very high impact of course. My iNew V3 actually works very well ...
I am still a bit struggling with accepting it is my phone causing this issue ... only with the voice regocognition I have this issue ... with all other commands and apps the connection is OK! Only with the "OK google" option it says "offline" ... and immediately (I do not see the colored circle). To me it looks more like a but in the software or something, but after 3 resets of the device I also cannot believe that ...
Any more options? Thanks!
Click to expand...
Click to collapse
Update: i tried several things with the WIFI / BT settings and on/off, but no luck. I have forwarded the above issues to Google, maybe they can help me out. I will keep you informed ... in the meantime anybody else some useful tips? Thanks!!!
Troxelke said:
Hello all!
I must say, this watch is a very nice toy to play with and very handy in meetings! I have used the watch for a few days now, but I (only) have 2 issues to be solved which I cannot seem to find the answer yet:
1. The watch is connected to my phone OK (all notifications come through all the time). However, when I say "OK google" and then for instance "show me my steps" or "show me the weather", it will go to a screen saying me the connection is offline (white logo on blue background on the top of the screen). When I dismiss that message, I see that my connection is still OK! Weird .... this happens to me practically 80-90% of the times .... on a very rare occasion it succeeds to show me the info I want. By the way, my internet connection is OK at that time.
2. I have my phone also connected with BT to my Volvo V40 (2013). However, with the watch also on BT, the carkit of my Volvo is now almost useless as the voice is completely messed up (from the caller to me, and from me to the caller), sounds very intermittend or something. It seems like the BT connection is not happy with having 2 devices to be connected at the same time. My phone is an iNew V3 ... could it be something with BT profiles or versions?
I have already tried to reset the watch, re-install wear on my phone, deleted the dalvik cache (phone), un-installed apps, but no luck. Anybody have a clue on the above?
Click to expand...
Click to collapse
which phone are you using? are you on custom rom or kernel?
doki81 said:
which phone are you using? are you on custom rom or kernel?
Click to expand...
Click to collapse
I am using a iNew V3 on KitKat with the 1.13 official version (however from needrom). Would that be the issue?
Troxelke said:
I am using a iNew V3 on KitKat with the 1.13 official version (however from needrom). Would that be the issue?
Click to expand...
Click to collapse
try to pair your watch with your friend phone and to check this is not a problem coming from your phone. sometimes certain kernel do have issue with some of the bluetooth device.
Hello everyone. Sorry for my English, because I am using a translator. I decided to write this post, because it happened to me the same trouble and I found her cause. In anticipation of its Nexus 6, I decided to temporarily buy fairly cheap option LG G60 (X135). When watch came to me, I noticed the same problem. I then tried to connect them to the Moto G (1st generation), and there is the same. but by chance, in the evening, in my hands was LG G90 and I connected watch to this phone. Everything works without any problem. it turns out that despite the declared characteristics (Bluetooth 4.0) in all devices, it works quite differently everywhere. I hope with Nexus no problems.
Hi all, after opening this thread I tried several things and have some new insights:
- new update (5.0.1) solved my issue with going "offline" after a voice command. Now it works perfectly! But only if I am not connected to my carkit.
- if my watch is connected and try to use the carkit the sound is still bad. So I would like to have my watch disconnected if my carkit connects:
-- this could be done by only allowing 1 device to pair with my phone and prioritize carkit to be first and watch to be second.
-- this could be done by actively unpairing the watch if I receive a call (and connect when call is over).
The first option would be the most reliable and most simple. I tried to find an app that restricts only having 1 pairing and having a prioritize option ... but I cannot find such app. People any options?
Thanks!
Hi guys, in response of the above, the app TRIGGER might do the job, but it seems closing the Android Wear app or disconnect via Bluetooth does NOT disconnect your watch! Has anybody succeeded in using TRIGGER to disconnect / connect the watch with a automatic job?