I've got an annoying problem with Bluetooth on my Kaiser. I'm currently using Motorola S9 headphones, I paired them with Kaiser for the first time and everything was working perfectly but whenever I turn Bluetooth on my phone off or pair the headphones to another device I cannot connect to tytn again. I have to delete partnership with headphones on TYTNII and then pair them again to be able to use the headphones. Everything is all right when I turn off the headphones and then turn them on again...connection is established automatically. The problem occurs only when Bluetooth on tytn was turned off or the headphones were used with another device. Is there a solution to this problem?
I've had some BT connecton problems too. I have the SonyDR-BT21Gs and if I pair them with something else, the only way I can get them to connect again is to initiate a phone call. Not sure why, but once the Hands Free protocol connects, the Wireless Stereo protocol also starts working. May or may not help you, though. FWIW, I also have the S9s and have had no problems with them, but I use them only with the phone while working out, so they may fall suffer under the same scenario as I described for the Sonys
Hello to all, I am having an issues with my AT&T Tilt. I have flashed to sleuths WM6.1 rom and I am having Bluetooth headset issues. I'm using the LG HBS-110 Stereo headset. After paring the device with my phone the headset works great for listening to music. However when attempting to make or receive a call the headset disconnects and the phone call is heard on the ear piece of the phone. Ive tried searching but could not seem to find any solutions to this problem. Can anyone give me any suggestions to get the headset working?
Thank you for your time.
I've paired my fuze to my 09 prius, but when incoming calls come in, I'm unable to hear the caller (they can hear me). Outgoing calls work fine (I can here them, and they can hear me) - it's just when I answer the phone using the Prius bluetooth handsfree.
I've had this phone paired to a motorola T505, and jawbone without issue. I've also paired an iPhone to the Prius, and it works fine, so it seems to be a specific combination of incoming calls and the fuze. I did delete the pairing and re-paired, which didn't work.
Stock ROM installed, google didn't return anything useful. Any suggestions would be greatly appreciated.
Thanks
Don
BT No sound on incoming calls
I hope that someone would anser this question!
I started having the same problem with my Bluetooth "Handsfree" Cardo-S800on my Fuze phone. When I call other people - everything works fine, but when I get an incoming call and answer from my BT or Phone - I cannot hear people but they hear me!.
If I use "Menu - Disable HandsFree then Enable HandsFree again" - I get the sound back!
It is definitely some setting in my phone that got "broken", becuase I had my car BT "Uconnect" working fine, but then it got th esame problem - no sound on incoming calls.
Anyone got a clue?
A hard reset solved the problem with my Fuze with the Toyota bluetooth in the Prius.
Don
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
tOz666 said:
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
Click to expand...
Click to collapse
Here, use BTAUDIO to solve it
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
tOz666 said:
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
Click to expand...
Click to collapse
okay then try to follow these instructions :
1. Install BTAUDIO .cab to your phone
2. Activate your bluetooth headset, and put it in "find" mode
3. Goto your phones comm manager and turn Blueooth on
4. Now pair your headset with your phone
5. Start BTAUDIO
6. Follow the instructions on the screen and BAM, you are done!
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.