[Q] EU version used in the UK - One (M7) Q&A, Help & Troubleshooting

I've just got a new HTC One which when setting up did not have English UK language as an option. The setup defaulted to English German and I've since found out that the phone is an EU version. Is this going to give me any issues in getting system updates and running apps? If the phone is not a specific UK model I'm worried I may not get certain updates. Will the language also influence the way apps run? Should I send it back?

Shouldn't be an issue if you're able to set it to English. The updates you receive will be specific to the software version you're running, which can be changed.
If you go to Settings>About>Software Information, what is the software version? Ideally you'd be looking for x.xx.401.x which is the WWE (world-wide English) version, or x.xx.1540.x which is the US Developer Edition, which should be equally suitable for EU usage. Only real difference between the two is the Dev Edition receives updates well before the others.
If your software version is not one of those, you can do some searching here on how to S-Off your phone and flash one of those versions to your phone. The short version is to register at HTCDev.com, follow the instructions on how to unlock your bootloader, then use Rumrunner to make your phone S-Off. After that, the doors start to open on allowing you to switch your phone's operating system. Just do some searching if this is the route you want to take. It sounds complicated, but once you've done it, it's not too bad. The next barrier would come only if your phone's model ID is different from the one the software you want to flash is for. I'm going to assume your phone is PN0710000 which would mean the 401 software would be an easy transition. To use the 1540 software, you'd have to change the model ID to PN0712000, which requires some extra steps.
Last thing if you decide to go this route is you will trip over the words "custom recovery" over and over again. Don't worry about it. Unless you have a specific need for one, I always advise against it since it will prevent you from receiving updates and has great potential to brick your phone if you don't know what you're doing.

Related

[Q] I Need some help here

Hello there
I am Abdallah from EGYPT, I have bought HTC HD7 t-mobile used phone and i am interested in knowing some information about it, so i am going to ask some questions if some one would like to help me answering them
Info. about my phone
HTC HD7 T-Mobile / Unlocked
Firmware : 2250.09.12001.531
Rom : 1.20.531.01
Radio : 5.51.09.11a_22.31.50.09U
1- is this firmware the latest version ? if not, how can i update it ? and which ROM is suitable for my phone ?
2- is there any way to install apps/games from PC to Phone instead of using the market place ?
3- what is meant by phone brand and how can i get mine ?
4- what is meant by branded roms and unbranded roms and which is better in case i want to implement one to my phone?
5- is there any way to have HTC sense in HD7 like Hd2 ?
6- what do tmous, telstra ,Schubert, CID, and RUU mean?
thanks in advance
khashabawy said:
Hello there
I am Abdallah from EGYPT, I have bought HTC HD7 t-mobile used phone and i am interested in knowing some information about it, so i am going to ask some questions if some one would like to help me answering them
Info. about my phone
HTC HD7 T-Mobile / Unlocked
Firmware : 2250.09.12001.531
Rom : 1.20.531.01
Radio : 5.51.09.11a_22.31.50.09U
1- is this firmware the latest version ? if not, how can i update it ? and which ROM is suitable for my phone ?
2- is there any way to install apps/games from PC to Phone instead of using the market place ?
3- what is meant by phone brand and how can i get mine ?
4- what is meant by branded roms and unbranded roms and which is better in case i want to implement one to my phone?
5- is there any way to have HTC sense in HD7 like Hd2 ?
6- what do tmous, telstra ,Schubert, CID, and RUU mean?
thanks in advance
Click to expand...
Click to collapse
1. If you are not careful, you could flash a new firmware and brick your phone. Not all firmwares work on all phones. New firmwares will be made available via official microsoft updates. I`d recommend you don`t try and flash new firmwares yourself manually unless you know exactly what youre doing.
2. Not without jailbreaking your phone. Look at Chevron WP7.
3. Phones are "branded" with their carriers logo i.e. tmobile. You`ll see that in the splash screen when you reboot your phone. Its completley normal.
4. See 3. If you buy a sim free phone (i.e. not via a carrier) then it will be unbranded. they function in exactly the same way as branded phones, just without the carriers splash screen at bootup.
5. No. Wp7 doesn`t allow the shell to be replaced like in WM 6.5
6. tmous=keyboard layout, telstra=carrier ,Schubert=code name for HD7, CID (carrier id?).
you sound like someone who likes to "play". Be careful and remember that if it aint broke, don`t fix it. Flashing new firmwares can be dangerous and potentially kill your phone. You are much better off waiting for official MS updates.
1.Not sure about it, I use T-Mobile in Asia with flash unbrand rom (Europe 1.60.401.01 - Radio 5.52.09.16 22.33a.50.10U) it's work like charm and os can be update to 7.0.7008.
2.Use Tom XAP Installer or Windows Phone deployment with Chevron unlock tool.
3.Brand mean that phone is come from carrier with carrier operator logo.
4.Brand rom will be customize something like radio channel frequency to made it compatible with their carrier.
5.MS not allow any OEM to customize their OS ,so.. we can't see sense on HD7 right now yet.
6.Go to visit HD7 Windows Phone 7 Development section ,that's good for you to start.
thanks to you my friends

[Q] Asia_HK 4.2.2 Update?

My apologies if this question has been posted already, I have however searched/read here as well as the internet and my eyes are ready to pop out!
I am in Canada on the Bell network with an unlocked HTC One phone purchased from pdaplaza.ca, here are the specs:
HTC One 801s
Model: PN0714000
CID: HTC_622
Version: M7_UL_JB_50
Android ver: 4.1.2
Rom/Software ver: 1.29.708.16
Build: htc_asia_hk/m7/m7:4.1.2
I would just like to get confirmation from anyone else with same phone whether or not they have received the OTA update of Android 4.2.2? From what I've read, the updates have rolled out to Asian markets, UK, Europe etc etc and I don't find anyone from Hong Kong *****ing about "no update" yet, which leads me to believe it has. If so then maybe their is something wrong with my phone. I am contemplating S-OFF, change model ID and CID etc, but would prefer to avoid any potential headaches.
While I'm here, has there been any confirmation on this variant having the 700MHz LTE band and if so being able to unlock and activate? Perhaps having LTE speeds may be worth the potential headaches!
Thanks, any clarification would be greatly appreciated!
Same phone model, same CID and still no update yet. Using the phone in China mainly.
flying dutchman said:
Same phone model, same CID and still no update yet. Using the phone in China mainly.
Click to expand...
Click to collapse
OK thanks Mr. Dutchman, I guess I'll keep waiting a bit longer......one of the downsides of owning an HTC, always freakin' waiting waiting for updates!!!
I have just bought the Same version of htc one just like yours 801s from 2 days ago and yes i received the 4.2.2 ota and updated:crying: and it updated my hboot also to 1.54 which doesnt have s-off till now ... So if you want s-off just s-off now on hboot 1.44 than update ota
But i dont know anything about the lte ?!
Mine is exact the same model as OP's phone, no updates yet. Just checked with and without VPN connection, both say no updates yet. I am not too concerned about it yet but it would be nice if we know when we are going to get what. My phone is working just fine as it is right now but not knowing if and when we get what is not really what I expected from HTC but who know, maybe we skip 4.2.2 entirely? patience I guess.....
An update or roll-out plan + schedule who is getting what and when would be the way to go, not knowing what is going on is not but as I said, my phone is working fine - no issues right now after 2 factory resets due to music player not seeing added music files and Wi-Fi connection problems. It's all good now.
Finally HERE!!!
Happy to report that I just pinged server for update and it is FINALLY here (downloading now). As others have stated, small pre-curser update before main update which is software version: 2.24.708.4 (427.18MB). Please note this is with my stock phone (specs at beginning of post), I have not made any CID etc alterations. Will follow up if anything weird happens.
Thanks for input ya'll.
Got it too just now, all OK and no issues at all. If any issues later on I will follow up here.
Should have started this thread way earlier.....LOL

How to turn my European HTC One to a Thai HTC One?

Hello,
I bought a new HTC One (M7) in Switzerland for a Thai friend. When I turn on the phone, I can select a language in the list of the pull-down menu. The Thai language is missing in this list and I would to add this language.
1. Can I get the Thai language if I flash the phone with a firmware using ODIN?
2.a Which firmware should I use to get the Thai language, and where to download it? I would like to use the HTC official firmware, this one pre-installed in HTC One sold in Thailand.
2.b Same question for the Samsung Galaxy S4.
3. If I understood the guide below, a hard-reset* will not reset the phone to the original HTC firmware pre-installed on the phone when I bought it. Isn't it?
* After flashing the phone with another firmware.
http://www.addictivetips.com/mobile/what-is-meant-by-firmware-stock-custom-roms-and-flashing-guide/
Thanks in advance and regards.
ODIN? Is not that for Samsung? Not working with HTC.
But flashing a different ROM will solve your issue.
Point 3 is correct.
Though i don't think that official firmware for a different region can be flashed without modifying a couple of things in the phone. AFAIK you need S-OFF because of the CID and change it to a different one than current or to SuperCID.
CID stands for Customer ID. HTC implemented this check to prevent flashing other region firmwares. For example, if you have a phone which CID belongs to Singapore, you normally can't update ROM from other region like EURO/USA/CHINA etc. You've to use same region firmware. Remeber that, SIMLOCK is not related to CID, if you sim unlock a phone still you may not be able to flash other region ROM. But unlocking tools like XTC, HXC etc does CID unlock too as well as SIM unlock. To Determine your phone's CID I've made a small script. Download getcid.rar from attachment, extract, connect the phone to Computer in Fastboot Mode, run getcid.bat. It'll show phone's current CID.
Click to expand...
Click to collapse
In my opinion it's better to unlock the phone, flash custom recovery and flash a stock custom ROM (official).
I think WWE ROMs have Thai (see screenshot), if I'm correct.

What's the difference between the engineer firmware and the official

Anyone know
Read OP http://forum.xda-developers.com/sprint-note-7/how-to/root-super-leaky-bros-sprint-galaxy-t3447202
That doesn't say what the difference is
If you're looking for official list i doubt you find one for leaked FW, but it would be nice, if people who have loaded this, posted comments about features that don't work or are missing.
Official firmware has all the bloat that comes with your carrier phone and may be locked down. Eng firmware is a basic firmware, unlocked, no bloat. This is usually the 1st firmware that is made to get the phone up and running, then they work off of this firmware to make the final production firmware.

Flashing firmware from a different region

Hi all, I'm new to modding in general so there's many things I don't quite understand, hoping somebody can help.
I bought an S10 from a site which was supposed to just send me a refurbed (italian) S10, instead they sent me the US version, (G973U) and I believe it is carrier locked since it's stuck with Android 9 and doesn't find any update.
I have tried searching to no avail what I should flash to simply unbrand it, and allow it to receive OTA updates without tripping Knox.
The build version is the following: PPR1.180610.011.G973USQU2ASGC and the CRC is XAA/XAA/ATT
Thanks in advance.
You shall call them.
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
CSC (not CRC).
XAA is a multi-region USA ROM, so I don't think it will change over properly for you in Italy. There are threads here for how you reflash a different ROM. The one I used for my S10+ was this one: https://forum.xda-developers.com/t/...e-links-and-flashing-discussion-here.3905897/ but I am sure there is one like that for your S10 non-plus... find it, follow the instructions, and you should be all set.
Thanks! I'm a newbie, what does it mean it wouldn't change properly? No OTAs? Tripping KNOX?
I have found this which seems to be the equivalent of the link you posted.
So, I should flash the U1 version right? However I see only a file "SAU - 1 - ....", and my build number doesn't end in that, furthermore I don't know which bootloader version I'm at.
lrzfc said:
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
Click to expand...
Click to collapse
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
FardinIslam said:
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
Click to expand...
Click to collapse
No problem. I'm aware of the mode I have to enter to flash, as above I'm trying to figure out which stock rom I should flash to avoid tripping knox, and to receive OTAs. What won't work seamlessly?
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Watch this video
lrzfc said:
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Click to expand...
Click to collapse
Hello, I'm in more or less same situation. When you flashed, which files did you use? All of them or just the AP_*** file?
Never mind. Flashed it anyway, now I don't see the AT&T startup screen anymore which is promising. Firmware version is now Android 11 (SM-G973U1 and not SM-G973U) on XAA CSC. Will see if I get any firmware updates later.

Categories

Resources