Database Develop

[Q] why i can't root my x8

why i can't root my fon??
i try so many time but the result still same..
the superoneclick just go over and over until it jammed..
i have follow the instruction.
bydaway, my fon was root before,then it get hardbrick
i use the pcc to repair it, ok..but cant root

Make sure you have USB Debugging turned on and unmount the sd card.

do you have usb debugging enabled?
btw do you have DroidExplorer installed on your PC?

already did...still not working...

badutKU said:
already did...still not working...
Click to expand...
Click to collapse
do u hav phone drivers installed?

kirmada said:
do u hav phone drivers installed?
Click to expand...
Click to collapse
i got the driver installed.debugging mode on, and i also unmount the sd..

badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS

try with other PC.

badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
wen i first rooted,i read on some thread dat i need to hav microsoft net framework(latest) installed too and yeah i rooted with superoneclick too,jus giv a try

kirmada said:
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS
Click to expand...
Click to collapse
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??

Try running SuperOneClick as administrator
Sent from my X8 using xda premium

badutKU said:
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??
Click to expand...
Click to collapse
if u root with superoneclick,it will install busybox and chargemon automatically while rooting it
then install xrecovery

are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general

do you have a exploit list on your soc? if you do choose psneuter and click root! thats the way I did it!
sorry if my english is bad

wilbso said:
are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general
Click to expand...
Click to collapse
it not a latest version...but i use it when i 1st try to root my fon..that time it was ok.

why??????????
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................

badutKU said:
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................
Click to expand...
Click to collapse
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100

Here is the lates superoneclick : http://forum.xda-developers.com/showthread.php?t=803682
I haved the same problem when my phone came back from se(bricked)
Have downloaded the lates superoneclick and it works!
And trie a reboot,after enabling usb debuging..
Good luck!

elderduke said:
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
Click to expand...
Click to collapse
+1. Its a great little program.
Sent from my E15i using XDA App

I have a problem with rooting my x8...
When i wat to root it, it goes all well till it comes to rooting device..
Then goes failed, and i get this screen(in attachment)
When i first got this phone, i rooted it normally... And I bricked it.
So, after I bricked it, i got that... Every time... I tried to factory reset it, but nothing...
I don't have any idea...
Any help?

[Q] Hard Bricked phone after Busybox update

Hi everybody, this is my first post here, I am very happy to be here, joining in this community.
When I tried to update the busybox binary to the latest version 1.19X (FroyoPro 2.5) I hard bricked my phone.
The Rom loads up but after that my phone doesn't work (an endless number of error messages appears).
I cannot even start the phone in ClockworkMod or Xrecovery.
I tried to recover my phone using SEUS and FlashTool but (If I didn't do anything wrong) it still doesn't work.
Now I don't know what to do. The phone is still under warranty but it is going to expire shortly, if I ask them to fix my phone, they surely won't accept my SE because it's clear I rooted it.
Can you suggest me any solutions - a good solution would also be to make it dead - maybe with a strong power supply...
Thanks in advance.

http://forum.xda-developers.com/showthread.php?t=1650174

Superuser_ said:
http://forum.xda-developers.com/showthread.php?t=1650174
Click to expand...
Click to collapse
Thanks, I'll try this. If it works (I hope so), I'll let you know.

Hi. It's my first time here to post too. Same thing happened to my w8. Installed busybox 1.19.3 (wanted to try supercharger), but when I rebooted I got stuck in the SE logo. Seus seems to not work anymore. Have you tried PCC? I simply flashed back to stock rom using flashtool myself. Try double checking. First time i tried i didn't install the drivers from flashtool's folder.

cascabel said:
Hi. It's my first time here to post too. Same thing happened to my w8. Installed busybox 1.19.3 (wanted to try supercharger), but when I rebooted I got stuck in the SE logo. Seus seems to not work anymore. Have you tried PCC? I simply flashed back to stock rom using flashtool myself. Try double checking. First time i tried i didn't install the drivers from flashtool's folder.
Click to expand...
Click to collapse
I think the first time I used FlashTool I didn't install the drivers. :banghead:
Today I'll try this way.

It worked, the first time I didn't install the drivers before using FlashTool.
Thank you very much.

Eeem, just reflash it with seus or if u can unlock bootloader then do that and flash custom kernel cuz custom kernels have cwm recovery built in what means u can flash many many fine roms. Hit thanx if i helped.

glad that worked.
are you still gonna update busybox? if you are pls let me know how you did it successfully without bricking! thank!

cascabel said:
glad that worked.
are you still gonna update busybox? if you are pls let me know how you did it successfully without bricking! thank!
Click to expand...
Click to collapse
At the moment I'm not going to update the busybox, if I'll succeed I'll post something on XDA or let you know via PM.

samsung xcover bricks after install busybox
everytime i run busybox free & i even bought pro it bricks my phone after reboot so i have to reflash the rom. its the latest official europe. samsung xcover gt-s5690. driving me mad. anyone any idea solution?? thanks

chuckens said:
everytime i run busybox free & i even bought pro it bricks my phone after reboot so i have to reflash the rom. its the latest official europe. samsung xcover gt-s5690. driving me mad. anyone any idea solution?? thanks
Click to expand...
Click to collapse
Dont update busybox..
Your kernel dont support it
Sent from my E15i

Gogeta said:
Dont update busybox..
Your kernel dont support it
Sent from my E15i
Click to expand...
Click to collapse
thanks for reply. on google play there are 3 different versions. 1.Robert Nediyakalaparambil 2. BusyBox ProStephen (Stericson) they both install 100% and work till i reboot and actually its not all the time i reboot... the third is BusyBox Installer JRummy Apps Inc. this one doesnt install it tells me wrong kernal.
it did not brick till i recently wipe partition&cache. it's running gingerbread on android 2.3.6. Headreck:crying:

chuckens said:
thanks for reply. on google play there are 3 different versions. 1.Robert Nediyakalaparambil 2. BusyBox ProStephen (Stericson) they both install 100% and work till i reboot and actually its not all the time i reboot... the third is BusyBox Installer JRummy Apps Inc. this one doesnt install it tells me wrong kernal.
it did not brick till i recently wipe partition&cache. it's running gingerbread on android 2.3.6. Headreck:crying:
Click to expand...
Click to collapse
Use custom kernels for your device.

[Q] Galaxy Note Bricked After A wrong PIT flash

Hello,
Earlier my GNote went to downloadmod and CWM :good: but when I flash any firmware it stucked at "factoryfs", :crying:
I tried to flash a pit file and I have flashed "N7000_16GB_Q1_20110914--patched--brick-between-1174-and-12985-MB--DATAFS-moved-by-11264-MiB.pit" while the flashing it stucked.:crying:..
I DON'T KNOW WHY...
I unplug the cable from the phone and tried to turn it in to download mod again, It wont turn on..
I plug it to the PC, It wont turn on or recognize :crying::crying::crying:
Please help me with this...... I want my GNote Back..
Thank you....!!!

amjiffy70 said:
it stucked at "factoryfs"
Click to expand...
Click to collapse
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
Haha +1 gotta love your sarcasm... xD... "Bricked your device successfully" ~
Tapatalking on my n7000

Take a look here and here..

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
I have searched and read a lot of forums I think the only way to fix this is JTAG method right? and no any other way to fix this... :crying::crying:

andreaonelove said:
Take a look here and here..
Click to expand...
Click to collapse
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/

amjiffy70 said:
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
Click to expand...
Click to collapse
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7

chasmodo said:
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7
Click to expand...
Click to collapse
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:

amjiffy70 said:
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:
Click to expand...
Click to collapse
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000

msedek said:
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000
Click to expand...
Click to collapse
hmm so is there anyway to fix this?

amjiffy70 said:
hmm so is there anyway to fix this?
Click to expand...
Click to collapse
There's no fix.. If you have warranty use it if not then pay for a mobo replacement
Tapatalking on my n7000

Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!

turn on
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at
factoryfs.img
Click to expand...
Click to collapse
..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the
AbyssNotekernel42RedTouchCustomLogo
Click to expand...
Click to collapse
and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms
XXLA4_CheckromRevo_NoteHD_V5, CriskeloRomNOTE.vICS-V11.2-MD5-7FEDC9597F42C0E9CA2AE4673E84798B
Click to expand...
Click to collapse
but after installed a rom and restart the phone it wont go to the system.. it stucked at
Samsung GALAXY Note GT-N7000
Click to expand...
Click to collapse
and keep restarting.. :crying:
is there any solution for this situation?

andreaonelove said:
Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!
Click to expand...
Click to collapse
friend I dont have warranty for my GNote .. thats why I want your help guys...

amjiffy70 said:
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at ..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms but after installed a rom and restart the phone it wont go to the system.. it stucked at and keep restarting.. :crying:
is there any solution for this situation?
Click to expand...
Click to collapse
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium

cousiver said:
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yep bro... do you know any solution for this?

have you tried with the right pit file?

nokiamodeln91 said:
have you tried with the right pit file?
Click to expand...
Click to collapse
yep I tried with and wothout
Q1_20110914_16GB.pit
Click to expand...
Click to collapse
still the same problem.. :crying:
for these firmwares;
N7000DDLP8_N7000ODDLP5_SLK
N7000DDLR6_N7000ODDLR2_SLK
N7000XXLA3_N7000OXALA3_OXA
Samsung-Updates.com-GT-N7000_INU_1_20120514221949_hbznmf1h8e

You said you tried to install XXLA4_CheckromRevo_NoteHD_V5.
was this successful using CWM?, if yes then after the installation, did you do a factory wipe?

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
hey bro now
I UNBRICKED MY GNOTE SUCCESSFULLY..
Click to expand...
Click to collapse

after the update...

Hello there,
After i updated with NUTS release, the update pops up again even tho i updated it. What could possibly be the problem?
Any help is greatly appreciate it. Thanks in advance

samircali said:
Hello there,
After i updated with NUTS release, the update pops up again even tho i updated it. What could possibly be the problem?
Any help is greatly appreciate it. Thanks in advance
Click to expand...
Click to collapse
is your bootloader unlocked???
if its thats the problem if not just reflash the newest firmware available for your device

TheHunk_2 said:
is your bootloader unlocked???
if its thats the problem if not just reflash the newest firmware available for your device
Click to expand...
Click to collapse
No, my boatloader is not unlocked. It shows that i have the 4.4.4 installed in my setings. Do i have to flash the ftf file again. I dunno what to do.

samircali said:
No, my boatloader is not unlocked. It shows that i have the 4.4.4 installed in my setings. Do i have to flash the ftf file again. I dunno what to do.
Click to expand...
Click to collapse
what is your device model number?
c6903 ,c6902 or what?

TheHunk_2 said:
what is your device model number?
c6903 ,c6902 or what?
Click to expand...
Click to collapse
My device mobile number is C6903. Is there hope to fix this. Maybe NUT uploaded the wrong ftf or the flashible zip.

samircali said:
My device mobile number is C6903. Is there hope to fix this. Maybe NUT uploaded the wrong ftf or the flashible zip.
Click to expand...
Click to collapse
Every problem can be solved.BUT DEATH :laugh:
Im c6903 too. im not having this problem im on this firmware http://dfiles.ru/files/tqsgjp29m
download it check your pc for the drivers and stuff and flash it .Don't forget to wipe the appslog cache and data
if still having the same problem then this is your best shot http://www.xperiablog.net/2014/08/0...rtified-for-xperia-z1-z-ultra-and-z1-compact/

TheHunk_2 said:
Every problem can be solved.BUT DEATH :laugh:
Im c6903 too. im not having this problem im on this firmware http://dfiles.ru/files/tqsgjp29m
download it check your pc for the drivers and stuff and flash it .Don't forget to wipe the appslog cache and data
if still having the same problem then this is your best shot http://www.xperiablog.net/2014/08/0...rtified-for-xperia-z1-z-ultra-and-z1-compact/
Click to expand...
Click to collapse
Is it with root or without root

You don't need root to flash the firmware just search abour it in Google you'll find everything you need.

TheHunk_2 said:
You don't need root to flash the firmware just search abour it in Google you'll find everything you need.
Click to expand...
Click to collapse
Yes, but I dont want to lose root. My phone is rooted with NUTS version since the beginning. This is the first time Im getting this problem.
Thanks anyway

samircali said:
Yes, but I dont want to lose root. My phone is rooted with NUTS version since the beginning. This is the first time Im getting this problem.
Thanks anyway
Click to expand...
Click to collapse
flash the firmware then root it with easyrooting kit and towlroot

[Q] SuperSu binary update failed

I flashed cm12 on my phone and now the super su doesnt work. It say needs binanry updated ..when i say ok it fails ...what do in ed to od to make it work . Please help

darshilshah87 said:
I flashed cm12 on my phone and now the super su doesnt work. It say needs binanry updated ..when i say ok it fails ...what do in ed to od to make it work . Please help
Click to expand...
Click to collapse
which version of supersu did you flash? i believe v2.44 is the latest http://download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip

I am pretty new to this. I just downloaded the app.... online .. isnt that what i am supposed to do... I am sorry but i am dumbo with android(rooting and flasing and stuff)

darshilshah87 said:
I am pretty new to this. I just downloaded the app.... online .. isnt that what i am supposed to do... I am sorry but i am dumbo with android(rooting and flasing and stuff)
Click to expand...
Click to collapse
yes, but you can download old versions online. some old versions are way too old for lollipop. try flashing the one in the link i provided. download it via your phone, boot into recovery after its downloaded, then flash it and reboot

Thanks brother

darshilshah87 said:
Thanks brother
Click to expand...
Click to collapse
youre welcome!
flash it, let me know if you are ok, and ask any other questions you might have(ill probably answer them)

simms22 said:
youre welcome!
flash it, let me know if you are ok, and ask any other questions you might have(ill probably answer them)
Click to expand...
Click to collapse
IT WORKS DUDE ........ YOU THE MAN !!! I thought i ****ed up my phone man.... its like when i write java code and **** wont work cuz i havent imported the damn class

darshilshah87 said:
IT WORKS DUDE ........ YOU THE MAN !!! I thought i ****ed up my phone man.... its like when i write java code and **** wont work cuz i havent imported the damn class
Click to expand...
Click to collapse
CM has root disabled by default I believe. If you download the SuperSU app when you're not rooted, you cannot install the binaries because the binaries go in /system which needs root to modify and its the binaries that make root possible. Kind of a catch ²²
When you flash the binaries from recovery to /system, you don't need root because root is only applicable to android, which isn't running when you're in recovery.
Hope this helps