Database Develop

Red triangle!!!! pls HElp

I need all of your help pls .my kindle fire hd 7" suddenly asking me for kindle fire system recovery after i restart my kindle .there is a red triangle with exclamation mark on it and there is just 2 options to choose from either you reboot or reset to factory defaults.i tried both of the options but its getting back to this red triangle every time it reboots .pls help anyone me to fix it.any advice,software,threads that will guide me thru this.sorry for the bad english.
i tried http://forum.xda-developers.com/showpost.php?p=32636163&postcount=1 but my pc no recognizes my kindle fire hd 7"; i have good driver cuz i put music from pc to kindle last week. i used original usb cable data.

Just hit reboot that happened to me to
sent from my minecraft world

Visit my friends over on the Kindle Fire First Aide thread if you haven't resolved this issue.
Sent from my KFHD using xda premium

Raymond199483 said:
Just hit reboot that happened to me to
sent from my minecraft world
Click to expand...
Click to collapse
He said he tried both of those and it comes back to that screen. That is just a recovery bootloop. First get your KFFirstAide on your computer. Then read from this page on to fix your problem. http://forum.xda-developers.com/showthread.php?t=2096888&page=140 (Look for posts starte by "Bdeatha" and "AmrBanawan". It starts on this page Post number 1396. You won't need a factory fastboot cable, so when you restore you should say "yes" to it asking you to reboot into fastboot mode.
Good Luck!

Any news?
Sent from my KFTT using xda app-developers app

Red triangle
miztah1999z said:
Any news?
Sent from my KFTT using xda app-developers app
Click to expand...
Click to collapse
I think that is necesary usb factory cable. cuz i tried with original usb cable of KFhd and no work, my pc no recognize my Kindle fire.
a problem is i´m from colombia and dunno where buy usb factory cable.

Kevlar-Bull said:
I think that is necesary usb factory cable. cuz i tried with original usb cable of KFhd and no work, my pc no recognize my Kindle fire.
a problem is i´m from colombia and dunno where buy usb factory cable.
Click to expand...
Click to collapse
NO check your devices manager, see if there is a kindle there in "portable devices" and then check device and printer to seee if kindle is in unspecified devices. You should be able to boot KFHD into fastboot without factory cable. To buy a factory cable if you need it you can Private message this guy. http://forum.xda-developers.com/member.php?u=4435645

miztah1999z said:
NO check your devices manager, see if there is a kindle there in "portable devices" and then check device and printer to seee if kindle is in unspecified devices. You should be able to boot KFHD into fastboot without factory cable. To buy a factory cable if you need it you can Private message this guy. http://forum.xda-developers.com/member.php?u=4435645
Click to expand...
Click to collapse
thank´s recovery my KFhd thank you. NOW. i need to fix one error my KFhd show 12gb /12gb and is 16gb /16gb . i will look for one tutorial for fix it.
thank you men. GOD bless you

There is no way to fix 12gb that's how much space there is
sent from my minecraft world

[Q] Bricked Kindle Fire HD 7" and PC cannot recognize device

I ordered a Kindle Fire HD 7" from Amazon few days ago. I rooted it by using Qemu tool then I did something wrong in /system/app. After rebooting, I cannot turn on my Kindle and its stuck on the kindle fire screen (Kindle Fire logo appears for a minute then it disappears).
I used a factory cable and put the kindle to fastboot successfully, but the problem is PC doesn't recognize it (windows said "unknown device"). I tried many methods in xda forum but they didn't work anyway. I reinstalled many time and tried in win 32, win 64 bit and even in linux but it still doesn't work.
Are there any solution for me? please help!
I was wondering if Amazon could replace it under warranty ? is it possible?

I thought I read you only use fast boot cable to get into fast boot, then normal cable to do the rest. See if that helps if not u can always try forcing the driver but idk if that's the best idea since it is saying unknown device instead of driver not found for kindle adb device or something like that.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
I thought I read you only use fast boot cable to get into fast boot, then normal cable to do the rest. See if that helps if not u can always try forcing the driver but idk if that's the best idea since it is saying unknown device instead of driver not found for kindle adb device or something like that.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I used fastboot cable to get into fastboot mode and then change to normal cable at you said, but the same situation -- Unknown device and device not found. Please see attached figure.
I also tried to forcing the driver many times and it still doesn't work at I said before.

I am going to say this now, windows 8 doesn't always work to well with us doing things to droid devices, or at least kindles, mainly because of drivers. Don't know if that's the case here because that device I don't think i have the right info, post the info on the details tab when u choose hardware id's from the drop down menu.
Also adb commands don't work in fast boot mode, a command u would want to try is fastboot -i 0x1949 getvar product
It should return something about Tate.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
I am going to say this now, windows 8 doesn't always work to well with us doing things to droid devices, or at least kindles, mainly because of drivers. Don't know if that's the case here because that device I don't think i have the right info, post the info on the details tab when u choose hardware id's from the drop down menu.
Also adb commands don't work in fast boot mode, a command u would want to try is fastboot -i 0x1949 getvar product
It should return something about Tate.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thank you for you helps. I tried fastboot -i 0x1949 getvar product on Win 7 PC and it didn't work also. It ended with <waiting for device>. Do you have any other idea to solve the problem?. Please help me . I feel stuck right now.
Ps: I read somewhere that it may work if the battery battery drain out, so i am waiting to try this method.

What's the device manager in windows 7 say? Also I won't respond for a few hours I'm about to goto bed but I figured I'd reply once more before doing so.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

One more thing, the error code show up in device manager is code 43

I've just borrowed an unrooted KF HD 7 from my friend and tried to connect to PC with normal and factory cable. It worked perfectly with no problem in both cables. So I think there is nothing wrong with the driver on PC.
Is my KF hard bricked and no way to restore it anymore

I don't know if its hard bricked, I still need the screen shot or just the text will do of what's in the device manager on that unknown device's details tab under the hardware id's choice on the drop down menu. If I recognize the vid in the details then I may be able to help.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
I don't know if its hard bricked, I still need the screen shot or just the text will do of what's in the device manager on that unknown device's details tab under the hardware id's choice on the drop down menu. If I recognize the vid in the details then I may be able to help.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Actually, It doesn't show any VID under hardware id. I gave up already and going to call amazon
Thank you for your response, stunts513!

Oop I bumped the thanks button on my kindle... When I said that you i was in the midst of technical babble, you wouldn't recognize the vid, its in that stuff that I asked for, its not literally labeled... Just the stuff in that area alone would be what I'm looking for.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

bump! any solution?

just solved an error

Help please...
I installed Xposed Installer and rebooted and now:
Now my pc
Is not recognizing with adb
In device manager it shows that it is a portable device.
Take a look at the photo.
I do not have a factor cable either
I have chameleon rom
I can get to the lockscreen but no further than that

If you have a ROM installed then it should be a easy fix, reboot into recovery and remove the exposed framework from an adb shell, if an adb device is not present in the device manager while in recovery but a portable device is, uninstall it and let it search for new devices and it should pick it up.
Sent from my Amazon Kindle Fire HD using Tapatalk

stunts513 said:
If you have a ROM installed then it should be a easy fix, reboot into recovery and remove the exposed framework from an adb shell, if an adb device is not present in the device manager while in recovery but a portable device is, uninstall it and let it search for new devices and it should pick it up.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
I think you missed the part when I said ADB doesn't recognize the device is plugged in. So how would I get it into Recovery? I do do not have a factory cable.
Take a look at this
https://db.tt/Hg46tGg0

Recovery = turn device off, turn on, hold down volume up as soon as you see orange kf logo, keep holding it even once it turns blue, should eventually say twrp, let go of button. Hope that helps.
Sent from my Amazon Kindle Fire HD using Tapatalk

stunts513 said:
Recovery = turn device off, turn on, hold down volume up as soon as you see orange kf logo, keep holding it even once it turns blue, should eventually say twrp, let go of button. Hope that helps.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
thank you

khoale said:
Actually, It doesn't show any VID under hardware id. I gave up already and going to call amazon
Thank you for your response, stunts513!
Click to expand...
Click to collapse
np, and wow i'm a moron, i originally posted this (with other text) thinking i was replying to something on the first page not realizing i was on the first page... woops.

stunts513 said:
I don't know if its hard bricked, I still need the screen shot or just the text will do of what's in the device manager on that unknown device's details tab under the hardware id's choice on the drop down menu. If I recognize the vid in the details then I may be able to help.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I attempted to use TWRP to reset the device and once it rebooted, the orange KINDLE FIRE HD screen will appear for a second, then the screen goes black, the the image appears again and then then screen goes black without end. Hard reset doesn't work. I tried pushing adb commands through but i get "waiting on device" and nothing else. Device manager doesn't recognize device either, it doesn't even appear on the device manager when I plug it in. Any ideas? I know I'm out. Based on other threads, I don't think that the factory cable will work either, although I don't currently have one even if it would. Any help will be greatly appreciated.

[Q] Kindle Fire HD Bicked and Message ''Unknown Device''

First, sorry for my English, I'm Spanish. The problem I have is that my kindle is bricked I used factory cable and put into fastboot mode then connect to pc but does not recognize the device. Get a message saying'''' Unknown Device. I have installed drivers 10 times and nothing .. Any solutions?
Thank You!!

Try updating the drivers with the ones in my signature and see what happens.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
Try updating the drivers with the ones in my signature and see what happens.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
You can explain me how to install your drivers please?

OK if I understand this correctly, I'm assuming if you open the device manager , there is a device called something like "tate-pvt" probably with an triangle next to it. Right click it and hit update driver, tell it to search the folder you extracted my driver to, it should install them from there. On another note, after you use the fastboot cable to put your device into fastboot, make sure you switch back to using a normal cable once the kindle says "fastboot" on the screen.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
OK if I understand this correctly, I'm assuming if you open the device manager , there is a device called something like "tate-pvt" probably with an triangle next to it. Right click it and hit update driver, tell it to search the folder you extracted my driver to, it should install them from there. On another note, after you use the fastboot cable to put your device into fastboot, make sure you switch back to using a normal cable once the kindle says "fastboot" on the screen.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I've done everything you've told me and nothing. When I install the driver from the device manager tells me the driver is updated and if I put normal cable after entering fastboot mode.

So what exactly is it doing now, or what is saying unknown device, you should be able to see if its working by running the fastboot command like this ”fastboot -i 0x1949 getvar product", it should report something back, if it does your ready to fix your kindle, otherwise if it hangs on waiting for device, something weird might be going on that needs more looking into.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
So what exactly is it doing now, or what is saying unknown device, you should be able to see if its working by running the fastboot command like this ”fastboot -i 0x1949 getvar product", it should report something back, if it does your ready to fix your kindle, otherwise if it hangs on waiting for device, something weird might be going on that needs more looking into.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
ya mine isnt detecting my kindle either. im on fastboot and using regular cable

Did u get your computer to detect your kindle?
Sent from my SGH-T999 using XDA Premium 4 mobile app

[Q] Help With Bricked 2012 HD7's

I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance

Shunloc said:
I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance
Click to expand...
Click to collapse
There's a hundred topics on this if you just use the search engine.

Thanks for that thought, i have looked, I do have the most up to date kindle usb drivers i can get but still can not get windows to reconize the kindle in fastboot, I just want to clairify that the issue with the hd7 that can "fast boot" is that i cant get my computer to reconize it

Plug it in with a normal cable once it's in fastboot, then try my drivers in my signature on the device in the device manager that should say something like tate-pvt or jem-pvt if it is a 8.9" model.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Shunloc said:
I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance
Click to expand...
Click to collapse
Ok have done some reading and it is possable that it doesn't go into fastboot all the way. All it does is stop on the fastboot logo haven't seen a red triangle at all

Shunloc said:
Ok have done some reading and it is possable that it doesn't go into fastboot all the way. All it does is stop on the fastboot logo haven't seen a red triangle at all
Click to expand...
Click to collapse
I only stated that because so many times we have posted lengthy responses to this question and it takes a lot to type it all up on a tablet.
You stated you have 2 7" tablets. So stick with Tate.
So in fastboot , that's what you should see, fastboot. You won't see a red triangle and adb will not be recognized. Download the system restore tool here http://forum.xda-developers.com/showthread.php?p=33156486 follow the OP.
Edit: If a fastest cord does nothing to energize your tablet, that's a hard brick.
Edit 2: Update link to proper one.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app

stunts513 said:
Plug it in with a normal cable once it's in fastboot, then try my drivers in my signature on the device in the device manager that should say something like tate-pvt or jem-pvt if it is a 8.9" model.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
The only thing i can get on device manager is "unknown device, no drivers installed"

"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized

Shunloc said:
"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized
Click to expand...
Click to collapse
To all still reading i wish to appoliigize for the gruffness and to thank all for the help i have recivied.

Shunloc said:
"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized
Click to expand...
Click to collapse
What that means is if adb is recognized then you can use a command to get into fastboot with a standard USB. This does not apply to you because you're looking. You want to restore your tablet, I have shown you how to.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app

Follow this link http://forum.xda-developers.com/showthread.php?t=2551661

[Q] Need help with kindle fire hd 7

my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or the fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????

starman99 said:
my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or the fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????
Click to expand...
Click to collapse
Can you boot into recovery..........u have the option of adb side load then..........make sure u have proper drivers ........
Sent from my Amazon Tate using XDA Premium 4 mobile app

thecoolster said:
Can you boot into recovery..........u have the option of adb side load then..........make sure u have proper drivers ........
Sent from my Amazon Tate using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no it boots to orange kindle fire screen for about 2 seconds then reboots and goes back to orange kindle fire screen. the blue kindle fire screen dosent come on. :crying:

starman99 said:
my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????
Click to expand...
Click to collapse
Have u tried kindle fire unbrick utility??????
Try using a computer which already has the drivers correctly installed...:thumbup:hope it helps :what:
Sent from my Amazon Tate using XDA Premium 4 mobile app

Yeah I tried it m8. Just sits at waiting for device cause PC doesn't recognise device..I have ordered a new fast boot cable cause the one I was using is a homemade one so gonna see if an official one is any more successful

starman99 said:
Yeah I tried it m8. Just sits at waiting for device cause PC doesn't recognise device..I have ordered a new fast boot cable cause the one I was using is a homemade one so gonna see if an official one is any more successful
Click to expand...
Click to collapse
Yes, use a factory/Flashboot cable and use SRT 1.3.5. With that cable the Kindle will go into fastboot as soon as you connect it to a PC/Laptop which has Fastboot drivers loaded. When you are in the fastboot mode, you can confirm that that teh ADB driver is being used by going to Devices--->Kindle

Use Kindle Fire first aide
You should Kindle Fire First Aide at this link to unbrick your Kindle after fixing drivers.
http://forum.xda-developers.com/showthread.php?t=2096888