Database Develop

Samsung Galaxy s3 4g (GT-I9305T)

hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:

Do you mean the Telstra GSIII LTE?
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse

This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app

NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:

awesome, thats great to know.
i was also doing some searching on the internet earlier today and realized that my s3 ( GT-I9305T) was only running the 4.1.1 version of android and that the GT-I9300 was updatable to 4.1.2, i then went on to check for an update which came back unsuccessful saying that i had the latest version of firmware, i understand that they are releasing it model by model but does anyone have any idea on whether the GT-I9305T will get the update? and also any estimate on when?

MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
Where did you get the stock telstra firmware? cheers

bretto_aus said:
Where did you get the stock telstra firmware? cheers
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3&model=GT-I9305T&pcode=TEL&os=1&type=1#firmware
there's the 4.1.1 stock telstra firmware.
cheers

txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
im wondering can istill root my devise its the gt-i9305t but it runs kitkat 4.44

just quickly hat do u mean by i9305t modem i dont understand
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
thought id repeat myself since i dont know where to write my reply.i dont understand what you mean by using "i9305t modem". i always just thought a modem was a modem nessassary for internet?
---------- Post added at 08:18 AM ---------- Previous post was at 08:12 AM ----------
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
ZachariahZ said:
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
Click to expand...
Click to collapse
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?

binga517 said:
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?
Click to expand...
Click to collapse
Gt-i930[5] = lte(4g)
gt-i930[0] = regular 3g model

Reply and question
Hey m8 thanks for reply could u point direction to how to root my phne

https://forum.xda-developers.com/ga...msung-galaxy-s3-unified-toolkit-v8-0-t1703488
Search the XDA forums all the information you want is there already. Also remember to do a Nandroid backup.

question
MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP

binga517 said:
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP
Click to expand...
Click to collapse
Have you tried this search?
https://www.google.de/search?hl=de&...0...1.1j2.64.psy-ab..0.2.341....0.hub_oipjIe0
I guess you will find help in one of the search results

First of all download Samsung USB Drivers: https://drive.google.com/open?id=1I3ilHBfl1lSvkqQwHZTEOE6usggQqQGb
Download TWRP for GT-I9305T: https://drive.google.com/open?id=1kmpXSVGdd_XR2WojWqAe8rd_Xm7gZ8Lj (its an old version of twrp but it should work)
After downloading twrp download Odin3: https://drive.google.com/open?id=10CLH6TqF6PLiqnMnjqY5IgsfU5KjX-F-
Extract it od desktop
Now power off your s3 and boot into download mode holding Power Button + Volume Down + Home Button
You will see that screen turned on and press Volume up to continue into Download mode
Connect your s3 into your pc via usb cable. Open Odin3 and you will see on the left side message that says Added!!
Now click od the AP button and select twrp that you downloaded
Go to options tab and make sure that Re-Partition is unticked, Auto-Reboot and F. Reset Time keep ticked
Finally click Start button and the twrp should flash, you will see green text saying PASS!
After flashing twrp the phone should automatically reboot, download SuperSU: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Turn off the phone again and hold Power Button + Volume Up + Home Button and it should boot into twrp, swipe to allow system modifications, and select install and find the supersu.zip file, select it and swipe to confirm flash.
After reboot your s3 should be rooted. You will have SuperSU app in the menu.

Samsung galaxy s3 GT-I9305t rooting need help please

Hey guys I'm new to rooting devices and got one about a month ago mine is a Samsung galaxy s3 GT-1903T on Telstra 4G. I have done a lot of searching over the web and have only found one thing, the Samsung galaxy s3 toolkit but I don't know if it works for my phone so if anyone could help a noob out that would be really great thanks

80 views still no reply please someone

Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2

apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
But can u at least answer this for me is the GT 19305T the same as I9305? If so i already have toolkit but the first thing asks me for my build which could be 11,12,13,14. idk which one cant find the last letters in system info

Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2

apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
apsmiles said:
Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Thank you

The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app

Obagleyfreer said:
The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Hi all,
I have a question about rooting, i followed the ausdim rooting guide and installed triangleaway but system still shows modified. Anyway, Is there a ways not to use CWM recovery and use stock recovery? how can i flash stock recovery and keep root? and if i want to update to 4.1.2, can i do OTA without losing root? Thanking you in advance

Jro03c.i9305xxalk5
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway

Jro03c.i9305xxalk5
awaeraas said:
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway
Click to expand...
Click to collapse
Ok, so I rooted my device yesterday after reading through like 10 more threads...just took a chance, thought to myself "guts and glory" and went for it..went well =) I chose option 14 the build was the same as mine and it worked like a charm.
I am still left with a few quesitons though...might not be relevant to the thread anymore...
Does the rooting share the same build-match requirement as the flashing of a new operatingsystem?
How do I uninstall apps that were preinstalled on an operatorlocked phone?
Anders - Norway

I think you should look for app in app store, Root App delete or something like that. Then search for you operator apps/files and remove.

Hey guys
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick

NickVHD said:
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick
Click to expand...
Click to collapse
1. Bootloader is allready unlocked
2.For how to root look here http://forum.xda-developers.com/showthread.php?t=2255190&highlight=how+to+root
3. Flash custom recovery, would advice this one http://www.youtube.com/watch?v=lxZf39vI0Lc. Download the .tar.md5 and flash with Odin in PDA.
4. Go to the CM thread and download the latest nightly and Gapps (Google apps) and place on the sdcard.
5. Go in recovery and wipe cache, dalvik cache, format system and data factory reset and then flash the CM rom and Gapps right after another without rebooting, reboot and you`re done.

hi
hello does it matter that it's a different usb cable, its of htc because the one i got with the phone doesnt seem recognise my phone on the pc
thanks

Is it better to update (to current) android version?
Or is there ANY practical sense to ROOT at lower level android v. Then apply OS mainframe.. YDVTY

[Q] I9305 Kernel to SGH-035

Could somebody help me or re-direct me where i could find info on how to make modifications to a kernel? i've unpacked it already but i don't know what i'm looking for.
My phone is an SC-03E (Japanese S3) it has the same specs as the note 2; 2gb ram, Exynos 4412 Quad [email protected], and LTE
i've gotten many ROMs for the I9305 to run on my phone by simply replacing the kernel in them with mine. However, there aren't any kernels for this phone that support overclocking.

XDA forum Android development and hacking may help.
jje

[Q] New S3 LTE, Do I flash this Rom

Picked up a Titanium Grey S3 LTE today after trading mine in.. Only paid an extra £40 for a BNIB one.. dont think they knew what they were selling hehe
Anyway, am I right in thinking that I flash these roms now?
http://www.sammobile.com/firmwares/1...ode=0#firmware
But flash it in the same way as a 9300, with ODIN 304 and samsung drivers.
Thanks

Just checked up, It is exactly the same process.. an S3 LTE is just an S3 with an added 4G circuit and antenna and 2GB of ram.. so yeah.. its flashed through ODIN the same.

NightOrchid said:
Just checked up, It is exactly the same process.. an S3 LTE is just an S3 with an added 4G circuit and antenna and 2GB of ram.. so yeah.. its flashed through ODIN the same.
Click to expand...
Click to collapse
Just don't flash the wrong firmware (NO I9300 firmware , ONLY LTE ones), and be sure you got a I9305 and not I9305N or I9305T.

fotbal5 said:
Just don't flash the wrong firmware (NO I9300 firmware , ONLY LTE ones), and be sure you got a I9305 and not I9305N or I9305T.
Click to expand...
Click to collapse
I flashed an EE UK modem.bin this morning after extracting it from the Orange UK LTE rom, so you gotto really watch for that.. or its a one way trip to brick, but thats something I make a point of when Im looking on here or samfirmware, so thanks for the reminder. Appreciated
Cheers

flashing a wrong modem isn't a "one way trip to brick", relax. the only things that can lead to it are flashing a wrong bootloader, recovery, or losing EFS

Just out of curiosity and maybe to help others be more aware...
When I checked I thought there was only one variant of the S3 LTE, didnt realise there was the T and the N.. but are these region differences such as N-North america or T-Thailand
So a 9305N or 9305T rom would brick a I9305 International device.

[Q] Flash G900F Rom on G900A?

Hello,
I have a G900A S5 and looking for flash the G900F on my phone. Is it possible? Or gonna brick the phone?
Thank you

You should search before you post. It isn't possible at this time due to locked bootloader
Sent from my SAMSUNG-SM-G900A using xda app-developers app

nbrent1007 said:
You should search before you post. It isn't possible at this time due to locked bootloader
Sent from my SAMSUNG-SM-G900A using xda app-developers app
Click to expand...
Click to collapse
Correct. But doesn't Stok G900F ROM come signed from Samsung? Does G900A bootloader accept only its ROM and no others with valid signature?

yoonus said:
Correct. But doesn't Stok G900F ROM come signed from Samsung? Does G900A bootloader accept only its ROM and no others with valid signature?
Click to expand...
Click to collapse
Search xda and you will find your answer also search google

have fun bricking your phone. please take pictures as you go.

Can I get iOS 7 on my G900A???? Samsung and AT&T locked it down like an iPhone so why not

The g900a has a locked bootloader and no exploit as of yet to install a custom recovery so you will brick if you try to do it.
Sent from my At&t Galaxy S4

I was actually just thinking about this.
What if with an ATT S5 you switched carriers to t-mobile, but you were experiencing compatibility issues with the ATT firmware?
I did a live chat on the samsung website and the computer/samsung rep told me if I took my phone to best buy to one of the samsung care locations that they could switch the firmware.
I wonder if this means they have the capability to remove the lock on hand.
-Not sure if I'm going to try it out seen as I'm not actually switching I don't want things to get weird but maybe someone who is going to return their att handset for a t-mobile one could try this before hand?

anyone tested? are the same settings ..

Omfg ... how hard is it to understand that no root no flashing ??? Plz do research before u ask dumb questions
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

I already tried this, it bricked my phone, I put it up on a page, it won't let me Flash a tmo rom or custom recovery, it went to the screen where it says "this firmware is not recognized by att..." etc I had to put it on download mode and push the original firmware by Odin. And I wasn't able to enter my recover after that until I got the att update not to long ago

Funny....but what if...oh wait, what if I try this? But, but....NO, quit trying before you PERMANENTLY brick your device lol
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app

Alarand said:
I was actually just thinking about this.
What if with an ATT S5 you switched carriers to t-mobile, but you were experiencing compatibility issues with the ATT firmware?
I did a live chat on the samsung website and the computer/samsung rep told me if I took my phone to best buy to one of the samsung care locations that they could switch the firmware.
I wonder if this means they have the capability to remove the lock on hand.
-Not sure if I'm going to try it out seen as I'm not actually switching I don't want things to get weird but maybe someone who is going to return their att handset for a t-mobile one could try this before hand?
Click to expand...
Click to collapse
Keep us posted if it works..
Sent from my SAMSUNG-SM-G900A

noob question, sorry to revive, chances to scold me.
if I have a rom with odin g900f if one chooses only
* AP
* CP
* CSC
these three can or can not be on at & t?
I have understood that if you play * BL will have problems, and the others?
I have not tried, I do not want a brick, lol
No way to install a stock rom g900f unmodified clear without knox, I've seen here they are using as a basis the g900f roms with safestrap but are highly modified?
I have tried to install the rom alvin g900f but I have problems with root and custom padlock at power on.

jm2k7 said:
noob question, sorry to revive, chances to scold me.
if I have a rom with odin g900f if one chooses only
* AP
* CP
* CSC
these three can or can not be on at & t?
I have understood that if you play * BL will have problems, and the others?
I have not tried, I do not want a brick, lol
No way to install a stock rom g900f unmodified clear without knox, I've seen here they are using as a basis the g900f roms with safestrap but are highly modified?
I have tried to install the rom alvin g900f but I have problems with root and custom padlock at power on.
Click to expand...
Click to collapse
you can't flash anything thru Odin unless it is the official AT&T firmware the ONLY way you can have a G900F firmware on your G900A device is to root (using towelroot by geohot) install Safestrap recovery and then flash any of the custom Touchwiz ROMS from the forums.

What if you want to install the other way?
An G900A ROM to G900F?
Is this possible?

hey guys.
sorry for bothering.
i have an AT&T samsung galaxy s5 G900f running kitkat 4.4.2
i'm from morocco ( the third world )
so no best buy stores or a way to get an At&t Sim card.
i tried updating my phone via settings> phone info > Software update but it says You software is up to date.
i did some searches anf found out that i need and An official At&t Firware of G900f which i looked up but found nothing.
so , can i flash any other model's Firmware like the one of the international version G900f or G900A....etc?
thanks in advance and thank you so much.
waiting to hearing from you soon.

The AT&T version is G900A, not G900F. Either way, you can't flash unofficial firmware versions. You can only flash custom roms if you are rooted and it's limited to a few.

johnkirchner said:
The AT&T version is G900A, not G900F. Either way, you can't flash unofficial firmware versions. You can only flash custom roms if you are rooted and it's limited to a few.
Click to expand...
Click to collapse
yes i know the At&T version is G900A.
i'm just confused.my phone is G900f.regardless , when checking for software update , here's what or says in the screenshot below
by flashing i meant updating the firmware via Odin or kies to lollipop or marshmallow.
maybe my phone isn't An At&T version, but it has an At&T firmware installed.
that's why i can't Get it updated via OTA updates.
so i wan't to update it manually.
i'm just wondering if i flash A firmware of G900f on my actual Firmware , will it cause my phone to stuck in a bootloop or such thing ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G900F using Tapatalk

johnkirchner said:
The AT&T version is G900A, not G900F. Either way, you can't flash unofficial firmware versions. You can only flash custom roms if you are rooted and it's limited to a few.
Click to expand...
Click to collapse
i have another confession.
i just turned off my phone , then accessed the recovery mode and found out it was a G900A.
and the applied CsC-Code : ATT.
but in phone info it says G900f and build number is G900FZUH1AND1
even Device status says it's Custom
i don't whether know if it's a G900f or G900A.
could i get some help please on how to dinsguish which model do i have ?
Sent from my SM-G900F using Tapatalk