[HELP] Emergency Calls Only - Samsung Galaxy Mini

Hello, please help me. My S5570i sometimes by itself goes in "Emergency Calls Only". I Must go to Airplane mode and turn it off again and then its OK. I have Hyperion 9 GM Rev 3 Final with kernel Cyanus 1.6.2. Can anybody help me?

I think a wipe data and wipe cache should risovere the problem

linckandrea said:
I think a wipe data and wipe cache should risovere the problem
Click to expand...
Click to collapse
Ty, i will try it.

virten said:
Ty, i will try it.
Click to expand...
Click to collapse
r u playing with (network preferences )? dont limit it to wcdma only

thebiggboss180 said:
r u playing with (network preferences )? dont limit it to wcdma only
Click to expand...
Click to collapse
I have GSM/WCDMA ( Auto mode) in settings.

Try to reflash your ROM, I had this problem with the stock that came with the phone, but now I don't face any of these problems.
Sent from my GT-S5570I using Tapatalk 2

http://forum.xda-developers.com/showthread.php?p=52794710
Check this

Related

DriodAce v2

Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
cht5 said:
Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
Click to expand...
Click to collapse
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Profiles?
did you wiped before flashing?
SMillerNL said:
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yeap .. Did that ..
Neo-Mike said:
Profiles?
Click to expand...
Click to collapse
I did set the profile with correct setting . i think :crying:
incredible.Zimbo said:
did you wiped before flashing?
Click to expand...
Click to collapse
Yeap .. did that !!! :crying:
cht5 said:
Yeap .. Did that ..
I did set the profile with correct setting . i think :crying:
Yeap .. did that !!! :crying:
Click to expand...
Click to collapse
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
I dun have this problem, in fact it auto turn it ON when finished flashed ..
Darkcloud4491 said:
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
Click to expand...
Click to collapse
Yeah .. checked .. ..
Anyway .. I did a re-flashed again .. yesterday .. and now it WORKED ...:silly: .. and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Hi,
One thing you should always try is reflashing the rom after turning completely off the phone. Most of the problems related to features missing are related with problems flashing or data left on the device and sometimes (do not know why) when just rebooting the phone partitions are left mounted.
Warper
---------- Post added at 02:14 PM ---------- Previous post was at 02:02 PM ----------
cht5 said:
and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Click to expand...
Click to collapse
The idea of making a partition from CWM is to prepare the SD to use one of the memory extender scripts and that will not be usable from the normal environment.
Depends on the script to show the total amount of memory on the place where you can see the total memory left on the system.

CyanMobileX WiFi?

Hey guys,
I have a Samsung Galaxy Mini with CyanMobileX, 2.3.8 Build 2 (See Original Dev) and the WiFi seems to have some problems. Here's what happens:
Click WiFi, WiFi turns on
Click <SSID>
Type password (WPA/WPA2)
Click Connect
WiFi icon turns grey with bars
No Internet Access
I tried:
Airplane mode + No ADB
Airplane mode
Normal + ADB
Nothing helps! Any solutions?
It's kernel problem, change your kernel.
How to change kernel?
droidface said:
How to change kernel?
Click to expand...
Click to collapse
Flash kernel, it's the only way. There is some kernel here.
dafaq kernel problem...there is no kernel problem in cyanmobile. STOP MISLEADING PEOPLE ~
when wifi is on, just do a reboot. if its working after boot, good for ur.
if not working, when wifi is on,boot into recovery, wipe cache and dalvik cache. Then reboot.
Even if above step does not work, do a fresh install.
Even then, if wifi is not working, grab a logcat and attach in cyanmobile user assistance thread...will pass it on to squadzone.
A_U said:
dafaq kernel problem...there is no kernel problem in cyanmobile. STOP MISLEADING PEOPLE ~
when wifi is on, just do a reboot. if its working after boot, good for ur.
if not working, when wifi is on,boot into recovery, wipe cache and dalvik cache. Then reboot.
Even if above step does not work, do a fresh install.
Even then, if wifi is not working, grab a logcat and attach in cyanmobile user assistance thread...will pass it on to squadzone.
Click to expand...
Click to collapse
Hey... speak it up...
CyanMobile have some missing modules in its kernel. So you need to stop misleading.
F4uzan said:
Hey... speak it up...
CyanMobile have some missing modules in its kernel. So you need to stop misleading.
Click to expand...
Click to collapse
do u even know wat u r talking about ? XD lol
A_U said:
do u even know wat u r talking about ? XD lol
Click to expand...
Click to collapse
Yes ! Then what ?

[Q] Gingerdx v031b Wifi Problem

Hi,
I am using Gingerdx v031b. But it turns itself off after the screen is turned off and the wifi is not active.
I did the setting in the Advanced section, but the problem continues.
I'm sorry my English is bad. :silly:
Thanks :good:
semih016 said:
Hi,
I am using Gingerdx v031b. But it turns itself off after the screen is turned off and the wifi is not active.
I did the setting in the Advanced section, but the problem continues.
I'm sorry my English is bad. :silly:
Thanks :good:
Click to expand...
Click to collapse
use search button..lot of answers there
but u can Delete all your saved networks and dont forget to wipe dalvik cache and clear cache
u can read this http://forum.xda-developers.com/showthread.php?t=1523981
or this http://forum.xda-developers.com/showthread.php?t=1605047
cheer
Set keep Wifi always on. Reboot and wait.
Sent using Aerodynamics
I have same but different problem
While E15 Optimizier isn't installed WiFi wokrs like a charm but after installing it WiFi doesn't work.....will THIS help?

[Q] Process google.android.partenersetup force close

I have a problem when booting my device. After media scanning I receive a message: process google.android.partnersetup force close. How can I solve this problem? Can anyone help me please?
Go to settings>applications>Google Play and deleted data and cache.
Charlie said:
Go to settings>applications>Google Play and deleted data and cache.
Click to expand...
Click to collapse
Still don't work
bogdan99999 said:
Still don't work
Click to expand...
Click to collapse
Which rom are you using?
Charlie said:
Which rom are you using?
Click to expand...
Click to collapse
Jellyblast V3. I have galaxy mini plus ( S5570I )

[Q] [AICP ROM] HELP!!WIFI problem!!!

i flash this rom and when i open the wifi it always show ''Turning WIFI on“ and the wifi does not work how to fix it ?
red7pa said:
i flash this rom and when i open the wifi it always show ''Turning WIFI on“ and the wifi does not work how to fix it ?
Click to expand...
Click to collapse
reboot to recovery and clear cache and dalvik cache and see what happen ....if problem still exist you need to do a full wipe and relfash the ROM.... before that try to flash with it t-kernel v2.6 oo version
good luck my friend :good:
it is work thanks buddy!
red7pa said:
it is work thanks buddy!
Click to expand...
Click to collapse
good to hear that my friend ...have fun

Categories

Resources