after installing vanir, cwm tells me "cant mount storage/sdcard0" and i cant access my sdcard0. when i open the sdcard0 folder with any file manager, the folder is empty and i cant creaty any folder inside, and i go to settings->storage->partition info i have 0/0 on /sdcard (FAT) and /sd-ext(EXT).
how can i fix this?
Thanx in advance
teo6389 said:
after installing vanir, cwm tells me "cant mount storage/sdcard0" and i cant access my sdcard0. when i open the sdcard0 folder with any file manager, the folder is empty and i cant creaty any folder inside, and i go to settings->storage->partition info i have 0/0 on /sdcard (FAT) and /sd-ext(EXT).
how can i fix this?
Thanx in advance
Click to expand...
Click to collapse
Try with this: http://forum.xda-developers.com/wiki/SD_card_partitioning
Know that you will lose its data, but anyway you can't reach it now...
P.S. I misunderstood, you can't reach internal storage. Try to format it in settings->storage->partition. Or simply change ROM before anything.
shut_down said:
Try with this: http://forum.xda-developers.com/wiki/SD_card_partitioning
Know that you will lose its data, but anyway you can't reach it now...
P.S. I misunderstood, you can't reach internal storage. Try to format it in settings->storage->partition. Or simply change ROM before anything.
Click to expand...
Click to collapse
i have installed the official rom but nothing changed, so i reflashed vanir and nothing again. I tried to format it from settings->storage-> it said that it deleted everything but it didnt work either, still in partition info i have 0,00B / 0,00B. Any other idea? thanx
teo6389 said:
i have installed the official rom but nothing changed, so i reflashed vanir and nothing again. I tried to format it from settings->storage-> it said that it deleted everything but it didnt work either, still in partition info i have 0,00B / 0,00B. Any other idea? thanx
Click to expand...
Click to collapse
Try using PIT file when you flash stock with Odin.
shut_down said:
Try using PIT file when you flash stock with Odin.
Click to expand...
Click to collapse
you mean, insteed of using the pda to put the stock rom, to use the pit? are you sure about that?
teo6389 said:
you mean, insteed of using the pda to put the stock rom, to use the pit? are you sure about that?
Click to expand...
Click to collapse
No, you have separate part for PIT. Open Odin and you will see.
shut_down said:
No, you have separate part for PIT. Open Odin and you will see.
Click to expand...
Click to collapse
so if i understund correct, i need a pit file and the rom. what is the pit file and where can i find it?
teo6389 said:
so if i understund correct, i need a pit file and the rom. what is the pit file and where can i find it?
Click to expand...
Click to collapse
I found some thread about it, read it.
http://forum.xda-developers.com/showthread.php?t=2154627
shut_down said:
I found some thread about it, read it.
http://forum.xda-developers.com/showthread.php?t=2154627
Click to expand...
Click to collapse
the guy in this thread flashed the original rom and it worked.
the only relevant thread i found is this one http://forum.xda-developers.com/showthread.php?t=2096093 where he sais to use the pit file, so if i found the pit file i should flash it with the original rom using odin?
teo6389 said:
the guy in this thread flashed the original rom and it worked.
the only relevant thread i found is this one http://forum.xda-developers.com/showthread.php?t=2096093 where he sais to use the pit file, so if i found the pit file i should flash it with the original rom using odin?
Click to expand...
Click to collapse
If you had 16GB yes, for 8GB you need 8GB pit. I attached you 8GB if you need. Follow that guide from the first post in your link.
shut_down said:
If you had 16GB yes, for 8GB you need 8GB pit. I attached you 8GB if you need. Follow that guide from the first post in your link.
Click to expand...
Click to collapse
yes i have the 8gb model, where is the attachment?
also is pit relevant to rom version, i found the 4.1.2 original, is it ok to flash with that?
teo6389 said:
yes i have the 8gb model, where is the attachment?
also is pit relevant to rom version, i found the 4.1.2 original, is it ok to flash with that?
Click to expand...
Click to collapse
Sorry, seems XDA does not allow *.pit extension to be uploaded. You need to unzip it first.
Yes, you needed to flash Stock 4.1.2 in first place.
,
P.S. I needed to put some random image in zip, it did not allow me to upload that small file on XDA... Just ignore it.
shut_down said:
Sorry, seems XDA does not allow *.pit extension to be uploaded. You need to unzip it first.
Yes, you needed to flash Stock 4.1.2 in first place.
,
P.S. I needed to put some random image in zip, it did not allow me to upload that small file on XDA... Just ignore it.
Click to expand...
Click to collapse
ok so to sum everything.
1) I open odin
2) i chouse the pit file and the 4.1.2 original rom
3) i press start
Do i need to make anything else in odin?
teo6389 said:
ok so to sum everything.
1) I open odin
2) i chouse the pit file and the 4.1.2 original rom
3) i press start
Do i need to make anything else in odin?
Click to expand...
Click to collapse
It is written in that thread what to do I think. But that should be it, pit in pit and stock firmware in pda.
Sent from my GT-I9070 using Tapatalk
shut_down said:
It is written in that thread what to do I think. But that should be it, pit in pit and stock firmware in pda.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
i did what we said and now with the original rom it doesnt mount the sd
i will try to reflash vanir later and see if anything changes
teo6389 said:
i did what we said and now with the original rom it doesnt mount the sd
i will try to reflash vanir later and see if anything changes
Click to expand...
Click to collapse
Flashing custom rom will not help. Read first thread I gave you.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Flashing custom rom will not help. Read first thread I gave you.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
the thread you gave me have no solution for me.
i have already flashed original rom with pit and it didnt work
teo6389 said:
the thread you gave me have no solution for me.
i have already flashed original rom with pit and it didnt work
Click to expand...
Click to collapse
You formated internal storage from menu? And in that thread you found, I think it was written to check repartition in Odin when you flash firmware and pit file, check again, maybe I am wrong.
Sent from my GT-I9070 using Tapatalk
shut_down said:
You formated internal storage from menu? And in that thread you found, I think it was written to check repartition in Odin when you flash firmware and pit file, check again, maybe I am wrong.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
ok i fixed it .
what i did was
i flashed CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_8G.tar.md5 , CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5 and GT-I9070_EUR_XX_8G.pit with odin
and everything came back to normal
teo6389 said:
ok i fixed it .
what i did was
i flashed CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_8G.tar.md5 , CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5 and GT-I9070_EUR_XX_8G.pit with odin
and everything came back to normal
Click to expand...
Click to collapse
Great to hear that.
Sent from my GT-I9070 using Tapatalk
Related
Seems there are some asking in the XXJM6 thread but usually it gets buried with posts specifically for flashing the FW.
I tried downgrading using different PIT files and FWs but it would fail via ODIN.
Is there a way to downgrade XXJM6 and how?
Thanks.
Sent from my GT-P1000 using Tapatalk
Are you on the first or second versions of JM6?
2nd version but came from the 1st XXJM6 leak
Sent from my GT-P1000 using Tapatalk
try flashing LHA with repartition on and then another firmware..
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
JHA you mean? Yup tried that with 816 PIT but it will immediately fail.
Sent from my GT-P1000 using Tapatalk
clubtech said:
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
Click to expand...
Click to collapse
Never tried JJ4, will give it a try then post the result.
EDIT: tried JJ4 - FAIL. Same goes with almost all the fw posted in samfirmware website. So i guess to those who flashed to JM6, we are stuck!! Good thing JM6 is a good fw. Still hoping a workaround though.
Sent from my GT-P1000 using Tapatalk
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
bdigitalstudio said:
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
Click to expand...
Click to collapse
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
antz88c said:
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
bdigitalstudio said:
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
Click to expand...
Click to collapse
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
antz88c said:
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
bdigitalstudio said:
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
Click to expand...
Click to collapse
Thanks but didn't work.
Sent from my GT-P1000 using Tapatalk
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
sedde said:
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
Click to expand...
Click to collapse
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
antz88c said:
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I have never flashed no modem or csc or repartitioned my flash , so i guess thats why i can downgrade.
Seems like u can downgrade if you don't use repartition however it is not clear why Odin fails if we try to repartition ...
Sent from my GT-P1000 using XDA App
Euro Galaxy Tab can´t downgrade...
I installed the JM6 taken from the first post of this thread: http://forum.xda-developers.com/showthread.php?t=854300
V1.7 ODIN3 flashing with files that included his pit (to repartition marked), PDA, CSC, and PHONE ...
When I tried to other ROMs have been impossible before. Consistent with ODIN errors that interrupt the process and let the tablet dead. Resusitaste flashing is only possible from the outset JM6 ...
It is an excellent ROM (fixed the Swype extrallendo and installing a ROM that came before).
Anyway, to be calmer, we expect a possible solution. Thanks.
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Yes, and NO, that doesn't work either...
FredBE said:
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Click to expand...
Click to collapse
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
I flashed the JVT ROM via odin , after it flashed and said PASSED in ODIN the phone reset , from there the the stock recovery said...
E: format_volume: rfs format failed on /dev/block/mmcblk0p2.
Is there anything I can do to fix it?
anybody tried this? http://www.youtube.com/watch?v=zdMhYYdMB08
I didn't look the video... From which firmware you flashed?
Did your tick repart and pit?
If you flash a GB-firmware you need GB-bootloader, you have them?
... bin unterwegs ... on the road ...
bvt-1 said:
I didn't look the video... From which firmware you flashed?
Did your tick repart and pit?
If you flash a GB-firmware you need GB-bootloader, you have them?
... bin unterwegs ... on the road ...
Click to expand...
Click to collapse
I flashed a JVT ROM which is 2.3.5 and yes I did a repartition and pit (512)
UPDATE!!!
I have been able to get the phone to boot in to gingerbread by partitioning an SD card with Fat32 and ext2.
It is rooted with CWM recovery , and I am unable to use the SD card or internal memory.
I am also unable to install a custom ROM.
Can anybody help me?
REALLY??? from a site such as this??? no help? nobody with any sort of idea??? so unlike this site.
confrontation said:
REALLY??? from a site such as this??? no help? nobody with any sort of idea??? so unlike this site.
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
xsenman said:
read this http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
Click to expand...
Click to collapse
I did try looking for posts about this , but did not come accross this one , will give it a go , thanks
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.
solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?
matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/
I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?
why no replay anyone help me
matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!
matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?