hi everybody.
I've a very deep question: what is the best kernel which I can use on V30B for improve battery life?
thx
I'm not sure what you are asking, titel of your thread don't really fits what you write.
If you ask for a kernel for IceBOOM from rrgrrg as he said in his fist post http://forum.xda-developers.com/showpost.php?p=35225392&postcount=1 the kernel from Gawbeakz (V30i Kernel). I don't think there is a other kernel as the one it came with, GB kernels will surly not run with it and ICS kernels probably neather.
ZeroGravity Kernel with governor "Interactive"
Try it... http://forum.xda-developers.com/showthread.php?t=2082740
pado11 said:
ZeroGravity Kernel with governor "Interactive"
Try it... http://forum.xda-developers.com/showthread.php?t=2082740
Click to expand...
Click to collapse
Grazie Pado (thx Pado), but I've found some battery drain problems. BTW I flashed ZG rom yesterday evening and it is very fast and smooth. I'm really surprised by the work done from Andoiib, hence I will keep that ROM untill new Zeus (if it will be better than this one)
thx
Lightning kernel
this kernel is made for stock roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.6
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
multi rom by Olivier
81mhz lowest cpu frequency
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the boot.IMG file first then flash the normal version 1 in recovery
then flash the overclock file you want uploaded in 2nd post
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia Z
Contributors
nikhil18
Source Code: https://github.com/nikhil18/android_kernel_sony_apq8064
Kernel Special Features:
Version Information
Status: Testing
Created 2014-11-20
Last Updated 2014-11-20
guys reuploaded version 1 forgot to change device name in anykernel.sh file
downloads
Great!! This is based off. 283 I assume?
This is cool! Have always been wanting to have your aosp kernel's features after changing to existenz from aosp. Anyway, one issue I encountered. Whenever I try to adjust the gpu voltage via es file explorer, the device just reboots itself. Never had that issue on your aosp version.
Kelvin98 said:
This is cool! Have always been wanting to have your aosp kernel's features after changing to existenz from aosp. Anyway, one issue I encountered. Whenever I try to adjust the gpu voltage via es file explorer, the device just reboots itself. Never had that issue on your aosp version.
Click to expand...
Click to collapse
did you even face this problem on my version 8 for cm
langeveld024 said:
Great!! This is based off. 283 I assume?
Click to expand...
Click to collapse
yup you can even try it with 292 because it has anykernel
Nope, only this one.
I faced the reboot after gpu voltage change only when using v7 intelli-plug.
Will try and report back. Btw is this intelli-plug or auto-smp? Or both?
And it doesn't seem to have init.d enabled is it?
langeveld024 said:
I faced the reboot after gpu voltage change only when using v7 intelli-plug.
Will try and report back. Btw is this intelli-plug or auto-smp? Or both?
And it doesn't seem to have init.d enabled is it?
Click to expand...
Click to collapse
it has intelliplug and i think initd has to enabled in ramdisk so flash a kernel which has initd enabled then flash my kernel over it it should work because my kernel does not replace ramdisk
Can You make One for Lollipop ?
Black_Eyes said:
Can You make One for Lollipop ?
Click to expand...
Click to collapse
my cm version in the other thread should compatible with lolipop you can try it before that delete libril.so from the kernel zip
nikhil18 said:
it has intelliplug and i think initd has to enabled in ramdisk so flash a kernel which has initd enabled then flash my kernel over it it should work because my kernel does not replace ramdisk
Click to expand...
Click to collapse
What I did was reflash existenz rom and the included stock kernel which has init.d support, but then when flashing this kernel I get error executing updater binary. I think it has to do with the stock Sony ramdisk cuz when flashing on hodorkernel it works fine. Although hodorkernel has no init.d support xD
Anyway thanks a lot for this!
hi
so happy to see your strong kernel for stocks
can we use it for stock bases roms same as existenz v 3 ?
thank you
agha_jo0n said:
hi
so happy to see your strong kernel for stocks
can we use it for stock bases roms same as existenz v 3 ?
thank you
Click to expand...
Click to collapse
yup it is compatible with all the stock roms based on .283 available on xda but you can even try with .292
langeveld024 said:
But why I'm getting the error executing updater binary on stock kernel and not on hodorkernel?
Click to expand...
Click to collapse
Does any kernel version of hodor gives binary error
nikhil18 said:
yup it is compatible with all the stock roms based on .283 available on xda but you can even try with .292
Click to expand...
Click to collapse
But why I'm getting the error executing updater binary on stock kernel and not on hodorkernel?
Btw reported the gpu reboot bug in bug report tab
nikhil18 said:
yup it is compatible with all the stock roms based on .283 available on xda but you can even try with .292
Does any kernel version of hodor gives binary error
Click to expand...
Click to collapse
U mean flashing this kernel on top of anykernel version of hodorkernel, or do u mean flashing hodorkernel anykernel version on top of stock kernel?
langeveld024 said:
U mean flashing this kernel on top of anykernel version of hodorkernel, or do u mean flashing hodorkernel anykernel version on top of stock kernel?
Click to expand...
Click to collapse
Flashing anykernel version of hodor kernel on top of stock kernel
langeveld024 said:
Gives same error.
Log: http://www.mediafire.com/view/uy4b3hmrxtlhhuv
Starting at line 376
Flashed lightning for stock, failed, after that flashed anyhodorkernel, failed also.
Guess it has something to do with the special unpacking tools needed for stock boot.img.
Maybe u can try build normal boot.img based on stock 283 FW?
Click to expand...
Click to collapse
Ok then I will make a boot IMG
nikhil18 said:
Flashing anykernel version of hodor kernel on top of stock kernel
Click to expand...
Click to collapse
Gives same error.
Log: http://www.mediafire.com/view/uy4b3hmrxtlhhuv
Starting at line 376
Flashed lightning for stock, failed, after that flashed anyhodorkernel, failed also.
Guess it has something to do with the special unpacking tools needed for stock boot.img.
Maybe u can try build normal boot.img based on stock 283 FW?
nikhil18 said:
Ok then I will make a boot IMG
Click to expand...
Click to collapse
Ok cool thnx. Could you eventually build it with auto-smp? Cuz on v7 and v8 cm version the intelli-plug builds give me the same reboot as I described in the bug report section.
Work fine on Tornado ROM V.2,.thanks dude,,Great Kernel!,
Gives error on existenz v3
Which kernel do you think is better or best from these two for ROCKZ1L ?
Advanced Kernel V16.0
or
OK Kernel V5
reply if any other !
Probably best kernel atm is RockZ1L, because of Great performance and battery life
and for unloker the API camera and turn on the gesture of z3 and newest device? (speed of shutter, iso, ecc) ???? What is the best kernel?
Thank you!!
Hi, i need to know, which is the best Kernel for MM to improve 100% the battery life, or which is the best configuration using Kernel Auditor.-
Thanks
marianoasis said:
Hi, i need to know which is the best Kernel for MM to improve 100% the battery life, or which is the best configuration using Kernel Auditor.-
Thanks
Click to expand...
Click to collapse
Sorry about the late response. I have tried Skyhigh 2.8, Googymax 1.2 and Audax kernels, and i can confidently say Googy max 1.2 is the best for battery saving (earlier Arter was the best, but he stopped the dev for his kernel). Googy max support also stopped now, but still you can use 1.2 version (i am currently using)..
lastfugi1979 said:
Sorry about the late response. I have tried Skyhigh 2.8, Googymax 1.2 and Audax kernels, and i can confidently say Googy max 1.2 is the best for battery saving (earlier Arter was the best, but he stopped the dev for his kernel). Googy max support also stopped now, but still you can use 1.2 version (i am currently using)..
Click to expand...
Click to collapse
Hi, this is Moto G 2014 forum, we don't have any kernel you wrote
h4ck3r00 said:
Hi, this is Moto G 2014 forum, we don't have any kernel you wrote
Click to expand...
Click to collapse
oops.. sorry thought i m responding to Note 5 thread...
hi guys, just thinking is redmi note 9 possible to get custom kernel for better performance ?
Compare Free Open Source Software
sourceforge.net
VD171 said:
Compare Free Open Source Software
sourceforge.net
Click to expand...
Click to collapse
wow great, it has custom kernel already..
so what features this kernel had ?
neutrino vs qk what is the difference ?
Source: https://github.com/ZyCromerZ/android_kernel_xiaomi_mt6768
info kernels
Stock Mod :
same as stock kernels
add TTL support
add wireguard support
enabled ThinLTO
Stock Mod 2 :
same as stock kernels
add TTL support
add wireguard support
can compiled using gcc 11
QuantumKiller-N:
Underclock CPU Big cores/cortex-a75 freq minimal from 850Mhz to 500Mhz
just normal kernel
80Hz kernel timefrequency
QuantumKiller-L:
Underclock CPU Big cores/cortex-a75 freq minimal from 850Mhz to 500Mhz
Undervolt CPU
just normal kernel
100Hz kernel timefrequency
Neutrino-<CPUCODE><GPUCODE>
CPUCODE for CPU type
GPUCODE for GPU type
higher kernel timefrequency
Detail about CODE things
L = CPU : same as stock kernel
X = GPU : same as stock kernel
Y = GPU : same as merlin (1.000Mhz) and for lancelot only
Z = GPU : Overclock to 1.018Mhz
example about code
Neurtino-LZ
L for Stock CPU frequencies
Z for Overclock GPU to 1.018Mhz
Click to expand...
Click to collapse
Source: https://github.com/ZyCromerZ/android_kernel_xiaomi_mt6768/blob/changelogs/about-lmk.md
Simple Low Memory Killer (SLMK)
Fewer applications in the background when playing games
cannot be tweaked
can be optimized on source kernel side !!
Android Low Memory Killer (ALMK)
can load more apps at once even while playing games
can be tweaked
can be optimized on source kernel side !!
Stock Low Memory Killer (Stock LMK)
same as stock kernel
cannot be tweaked
im not sure if it can be tweaked on kernel side or not,but maybe nope xD
Some QnAQ: good for Battery Backup?
A: Stock LMK is good enough for it, but u can try SLMK one
Q: good for gaming?
A: between SLMK and ALMK, depends on ur usage
Q: Why it has 3 types?
A: im just give an option to u
Q: what is best slmk?
A: try one from all of them for a few days first + same build date
Q: what if is it wrong?
A: im not pro, im just tell u about it based my own experience
Click to expand...
Click to collapse
VD171 said:
Source: https://github.com/ZyCromerZ/android_kernel_xiaomi_mt6768
Click to expand...
Click to collapse
VD171 said:
Source: https://github.com/ZyCromerZ/android_kernel_xiaomi_mt6768/blob/changelogs/about-lmk.md
Click to expand...
Click to collapse
wow, this is so good thanks to this.
additional question: are these kernel applicable to any custom tom or miui only? android q or r only? do my devices need rooted for this to work? or the overclock one only needs to be rooted?
gasleak08 said:
wow, this is so good thanks to this.
additional question: are these kernel applicable to any custom tom or miui only? android q or r only? do my devices need rooted for this to work? or the overclock one only needs to be rooted?
Click to expand...
Click to collapse
I'm not sure about custom roms.
You need to try that.