Related
This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez
Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz
Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.
i tested..............
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler
Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!
angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one
First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.
rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test
Can you put in the next update some more CPU governers and I/O scheduler?
zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium
lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!
Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.
Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2
rugglez,
Please add pulse boost and hotplug governor. Thanks.
Fluid Kernel
FOR KITKAT AOSP ROMS
This is enhancement over basic CM kernel to attain more fluidity, performance and power saving.
There is no heavy modification like NX-Kernel or Mackay Kernel which causes lag eventually.
Kernel is compiled with Linaro Toolchain 4.7-2013.10 and is bug free.
If any bug found other than one already in CM11 basic kernel, please report.
OCed but default max frequency is 1GHz.
Feature requests are welcome except for BLN feature.
Download Link:
http://www.mediafire.com/?4ba44ymbkcx4m
Kernel Source:
https://github.com/neobuddy89/vibrant_fluid_kernel
Latest version:
v1.0
Any feedback/views/suggestions are welcome.
Regards,
Neo
v1.0:
+ Linaro Toolchain 4.7-2013.10 compiled
+ Entropy Depletion Fixes and Enhancement
+ WiFi wakelocks reduced
+ OC Support upto 1.4 GHz
+ Minor network tweaks
+ Reduction in memory reservation for logging
+ Memory leak fixes
+ Performance tweaks
Thanks a lot Neo. You are amazing.
Will try this out on my ROM 11/20
thanks a bunch...cant believe this phone is still running and running like a beast at that.
outdoing yourself for us :good:
Lovely!
I want to click like 999 times!!!!
Very good! Really - performance gains!
laylovj said:
thanks a bunch...cant believe this phone is still running and running like a beast at that.
Click to expand...
Click to collapse
Actually KitKat was/is supposed to be a release which will help memory-challenged phones (like ours), so if anything KitKat *is* something we expect ardently and sure as hell hope that dev support won't end now, now that we finally reached an OS version actually suited for our low-ram phone(s)...
Thanks Neo for making a start in supporting us with 4.4 goodness...
Thanks for this rock kernel using it on captivate
If u can compile this kernel on captivate would be thankful
Just the difference is the volume keys layouts
Great work!!
It will be really great if you can compile this kernel also for the captivate!!
Monfro said:
Great work!!
It will be really great if you can compile this kernel also for the captivate!!
Click to expand...
Click to collapse
Should learn to compile your self. Or switch the volume key layout to revers it back to normal
@sada23 Is this article helpful to your already awesome kernel? http://source.android.com/devices/low-ram.html
I noticed that we have Linux 3.0.x in use, which probably lacks the "tunable reclaim" feature, but could be cherry-picked from the patch in 3.4 branch, as stated by Google:
Support for a new kernel tunable is added in the android-3.4 kernel branch as patch 92189d47f66c67e5fd92eafaa287e153197a454f ("add extra free kbytes tunable"). Cherry-picking this patch to a device's kernel will allow ActivityManager to tell the kernel to try to keep 3 full-screen 32 bpp buffers of memory free.
For those who are in search for Ramdisk source, get it here:
https://github.com/neobuddy89/fluid_kernel_vib_initramfs
I reckognize that USB thethering is not working with fluid kernel and sada's unofficial KK 4.4. It ends in a reboot.
Sent from my SGH-T959 using xda app-developers app
I would like to see the kernel upgrade. Just ask to remove overclocking 1.3/1.4 GHz, since it will probably kill the smartphone, and my at those speeds just hangs and you have to remove the battery!
Martin_Devil said:
I would like to see the kernel upgrade. Just ask to remove overclocking 1.3/1.4 GHz, since it will probably kill the smartphone, and my at those speeds just hangs and you have to remove the battery!
Click to expand...
Click to collapse
Then don't overclock to 1.3/1.4 GHz. Some peoples devices might be able to handle it. Just because yours can't doesn't mean to nobody's can. Be smart with what you do and know what your phone can handle. Mine does 1.4GHz just fine.
neobuddy89 said:
Fluid Kernel
FOR KITKAT AOSP ROMS
This is enhancement over basic CM kernel to attain more fluidity, performance and power saving.
There is no heavy modification like NX-Kernel or Mackay Kernel which causes lag eventually.
Kernel is compiled with Linaro Toolchain 4.7-2013.10 and is bug free.
If any bug found other than one already in CM11 basic kernel, please report.
OCed but default max frequency is 1GHz.
Feature requests are welcome except for BLN feature.
Download Link:
http://www.mediafire.com/?4ba44ymbkcx4m
Kernel Source:
https://github.com/neobuddy89/vibrant_fluid_kernel
Latest version:
v1.0
Any feedback/views/suggestions are welcome.
Regards,
Neo
Click to expand...
Click to collapse
Can you update this kernel？？
any updates for kernel?
It can be used in my PSX Nexus 4?
Kaka88 said:
It can be used in my PSX Nexus 4?
Click to expand...
Click to collapse
No... Try the Nexus 4 threads.
http://forum.xda-developers.com/nexus-4
Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
multi rom byOlivier (sony 233 blobs)
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
thomas1991_12 for linux patches and features
cyanogenmod for kernel source
Tommy-Geenexus for guidance
faux123 - For almost all kernel features
Alx31TLse-for ramdisk
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia Tablet Z
Contributors
nikhil18
Kernel Special Features:
Version Information
Status: Testing
Created 2014-09-20
Last Updated 2014-09-20
changelog
version 1-initial release with all features
downloads
nikhil18 said:
changelog
version 1-initial release with all features
Click to expand...
Click to collapse
Awesome but which do I use for tablet z 312
cantenna said:
Awesome but which do I use for tablet z 312
Click to expand...
Click to collapse
pollux windy is wifi and pollux is wifi and 3g
.....
Does it also work on omnirom?also which app should we use to control cpu/gpu overclock?trickster mod or setcpu?
pangiotis24 said:
Does it also work on omnirom?also which app should we use to control cpu/gpu overclock?trickster mod or setcpu?
Click to expand...
Click to collapse
no it wont work on omni rom because its not cm based you can try carbon rom and use trickstermod kernel app available on playstore for cpu and gpu settings
gpu acceleration
Nog possible to use hardware acceleration in video. Used bsplayer and xbmc. Device resets. No overclock, just default settings. Pollux windy.
adoe said:
Nog possible to use hardware acceleration in video. Used bsplayer and xbmc. Device resets. No overclock, just default settings. Pollux windy.
Click to expand...
Click to collapse
Doesn't seem to work with multi rom, is it possible?
cantenna said:
Doesn't seem to work with multi rom, is it possible?
Click to expand...
Click to collapse
it should work because the kernel is multirom patched but only the twrp recovery is missing
if only CM have working GPS... daamn
Using this kernel the app animations lag a lot, also it seems like even though I'm forcing the min and max CPU clock to 1836mhz, It's still maxing out at the default 1.5ghz. Using the latest CM11 nightly on the pollux with a clean install. Any suggestions?
ok guys version 1 reuploaded the problem was the voltages which i did not change for the tabs and please use simple gpu governor because ondemand drains more battery.
Rootk1t said:
and what about interactive governor?
Click to expand...
Click to collapse
Could not find a proper commit for the governor but I had put one from nexus 4 but it did not work
nikhil18 said:
ok guys version 1 reuploaded the problem was the voltages which i did not change for the tabs and please use simple gpu governor because ondemand drains more battery.
Click to expand...
Click to collapse
and what about interactive governor?
I Love you OP! thanks for a custom kernel for my pollux windy will Try tomorrow
This is a really good kernel! Possible to make it compatible with aero control from play store? Cheers
cantenna said:
This is a really good kernel! Possible to make it compatible with aero control from play store? Cheers
Click to expand...
Click to collapse
It is compatible but trickster mod app is still better
Sent from my C6603 using XDA Premium HD app
Seems to be one of the best kernel
As title say, it's true. I installed this kernel o cm11.pollux10072014 and everything is just great. I was made my root with a help by xzdualrecovery. Put some mods as a beats 2.0 and voilà... Everything is a perfect. CPU is ticking on 1728 MHz with a governor INTERACTIVE and GPU is on 627 MHz and the governor is PERFORMANCE. I'm using 3c toolbox pro, formerly called Android Tuner to set all clocks, governors and build.prop and the stuff include OOM, SD Card boost, Entropy etc. etc. So now, I have in a new Antutu benchmark (5.1) score about 25500 points. So big thanks to the developer for this great kernel. Have a great time, Peter :good: :laugh:
nikhil18 said:
It is compatible but trickster mod app is still better
Sent from my C6603 using XDA Premium HD app
Click to expand...
Click to collapse
Any chance for an aosp kernel?
I find omnirom the smoothest rom for pollux_windy.
varben said:
Any chance for an aosp kernel?
I find omnirom the smoothest rom for pollux_windy.
Click to expand...
Click to collapse
No bro I need to make the kernel from scratch and I don't have time but I am going to make a kernel for omni ROM when lolipop comes out which will be also compatible with cm12
Can anyone help me i am looking for a complete benchmark of Motorola droid 4 (any rom) the web reviews cant help me so much i want to see if it suits of my needs so i can buy it !
thanks
giannhs_n said:
Can anyone help me i am looking for a complete benchmark of Motorola droid 4 (any rom) the web reviews cant help me so much i want to see if it suits of my needs so i can buy it !
thanks
Click to expand...
Click to collapse
If you need benchmarks, the droid 4 is not for you.
Sent from my DROIDX using Tapatalk
I am not an android geek'er !
sd_shadow said:
If you need benchmarks, the droid 4 is not for you.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
i had xperia pro(its nearly broken) i just want to compare the results to see if they are similar because they are both old phones and i need the qwerty keyboard...and some basic multitasking without lags, it would be helpful if you can give me a screen shot of anutu benchmark of your phone or droid 4, numbers always help to decide when you compare 2 phones.
Regards
John
Antutu v5.2.0 on my Droid 4 with Slimkat 8.8 and Lucize jbx kernel scores 16504 @ 1300mhz CPU / 384mhz GPU, and with the CPU fully overclocked to 1404mhz it scored 17112
1200mhz is stock on the CPU and 307mhz on the GPU.
Elanzer said:
Antutu v5.2.0 on my Droid 4 with Slimkat 8.8 and Lucize jbx kernel scores 16504 @ 1300mhz CPU / 384mhz GPU, and with the CPU fully overclocked to 1404mhz it scored 17112
1200mhz is stock on the CPU and 307mhz on the GPU.
Click to expand...
Click to collapse
did you compile it by your self? because i am not able to change the gpu/cpu values with root explorer/terminal
*i flashed lucize wip kernel
if its a custom build by you with oc,can you share it plz? thanks !
giannhs_n said:
did you compile it by your self? because i am not able to change the gpu/cpu values with root explorer/terminal
*i flashed lucize wip kernel
if its a custom build by you with oc,can you share it plz? thanks !
Click to expand...
Click to collapse
It has to be the "JBX" kernel, lucize has decided to remove this file from his post for some reason, I've attached it to this post. It's based off dtrail's JBX kernel for the motorola RAZR, you can flash that kernel to the device too but I found the radio signal level would read wrong, so I have always used this one.
Elanzer said:
It has to be the "JBX" kernel, lucize has decided to remove this file from his post for some reason, I've attached it to this post. It's based off dtrail's JBX kernel for the motorola RAZR, you can flash that kernel to the device too but I found the radio signal level would read wrong, so I have always used this one.
Click to expand...
Click to collapse
seems okay it has overclocked gpu and uv/oc-+ cpu plus governors :good:
i will see the battery now
Thanks for sharing :cyclops:
Hi!
Is it possible to use "JBX" kernel with stock ROM? Or maybe only module that allowing GPU overclocking?
Borchuck said:
Hi!
Is it possible to use "JBX" kernel with stock ROM? Or maybe only module that allowing GPU overclocking?
Click to expand...
Click to collapse
you can use it with stock rom,it has stock sources
giannhs_n said:
you can use it with stock rom,it has stock sources
Click to expand...
Click to collapse
Can you tell me how to do this?
Thanks in advance!
Borchuck said:
Can you tell me how to do this?
Thanks in advance!
Click to expand...
Click to collapse
You need to be rooted and have a recovery installed like TWRP / safestrap, you install that kernel zip just as you install a third party ROM through recovery. If you just want GPU overclock don't bother, the increase from 307 to 384mhz only increases GPU performance by maybe 5%, it's purposely set to 307mhz stock because the GPU is bottlenecked elsewhere (ie: memory bandwidth), 384mhz increases battery drain and heat without much performance gain.
Elanzer said:
You need to be rooted and have a recovery installed like TWRP / safestrap, you install that kernel zip just as you install a third party ROM through recovery. If you just want GPU overclock don't bother, the increase from 307 to 384mhz only increases GPU performance by maybe 5%, it's purposely set to 307mhz stock because the GPU is bottlenecked elsewhere (ie: memory bandwidth), 384mhz increases battery drain and heat without much performance gain.
Click to expand...
Click to collapse
When I install that kernel on my stock ROM/partition the phone doesn't even boot...
How much you can overclock CPU?
Borchuck said:
When I install that kernel on my stock ROM/partition the phone doesn't even boot...
How much you can overclock CPU?
Click to expand...
Click to collapse
After much testing I could only get 1391mhz 100% stable, regardless of voltage settings. Could get 1.5ghz to benchmark, but never fully stable. It does speed up the phone quite a bit, but the biggest improvement is simply using a debloated ROM with every APK removed that you can.
Elanzer said:
After much testing I could only get 1391mhz 100% stable, regardless of voltage settings. Could get 1.5ghz to benchmark, but never fully stable. It does speed up the phone quite a bit, but the biggest improvement is simply using a debloated ROM with every APK removed that you can.
Click to expand...
Click to collapse
Thank you very much but as I said I can't manage to install this kernel on the stock ROM/partition...
This is my custom kernel for Dior(Redmi note 4G single SIM).Will work on all CM/AOSP based roms
Use "Kernel Aduitor" app from Play Store to change kernel parameters
To install,Download attached file and flash using recovery.No need to wipe anything!
Features/Changelog
V1.7
Compile with UBERTC GCC 4.9
Add Alucard Hotplug as default
Remove DEBUG_KERNEL and loads of debug and HID drivers.User RAM now 1876 MB
Remove unneded panel drivers
Note: If u want to sacrifice battery for performance,disable hotplug using Kernel Aduitor app
V1.5
Fix touch edge bug for some touchscreens
Compile with GCC 4.9
Remove GPU OC for now
Faux's Sound Control
Savoca's KCAL support for post processing control [v2]
Replace Qcom's MPDecision with Faux123's IntelliPlug hotplug(default)
Add new IO Schedulers: Sio,Sio+,Tripndroid,Zen
New CPU Governors: Smartmax,Darkness,Intellimm,Yankactive,Wheatley,SmartAssH3,Nightmare,Intellidemand,Asswax,Adaptive,Abyssplug,Abyssplygv2,Alucard,Lionheart
Even more RAM unlocked
ARM_UNWIND disabled
Use Ext4 for Ext2/3
V1.0
GPU OC to 480 Mhz
CPU OC upto 1693 Mhz
Removed some debug/bloat from kernel
More RAM available to user
Sources
https://github.com/sakindia123/android_kernel_xiaomi_dior
Thanks to Faheem Kamal,Wang Hao Yang and audahadi for device bringup
is this kernel will cause heating issue:what:
Is this kernel worth it or will it make the device more oven like cause I can barely play some games.. Like FTS2015..
TheAqib
Send from my RedMi Note4G
Awesome work Sarthak! Thanks a lot for your efforts.
Sent from my HM NOTE 1LTE using Tapatalk
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
OldYellowBricks said:
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
Click to expand...
Click to collapse
New update today or tomorrow.
I wont mess up the hotplugs :good:
V1.5 released.Edge touch fix included.See changelog in post#1
Did anybody test this kernel with latest MIUI 7?
Sent from my HM NOTE 1LTE using Tapatalk
Hi! Great kernel, but seems to be missing the "call touches while screen off problem" which is already fixed in faheem's kernel: https://github.com/faheemkamal/android_kernel_xiaomi_dior .
v1.7 released!
Just for CM/AOSP Roms?
Will this work on mokee 6.0?
Any plan to port from the current kernel source from 3.4 to lets say 3.10.x?
Hi! I'm on cm12.1, can I install this kernel? What are the instructions to install it? Will I lose my data? I have xposed installed.
pls update the camera drivers
in blisspop rom the camera goes fully black and then comes back multiple times when coming from sunlight to my home..
also will it work in 6.0 based roms ???
network problem
network reset while cellular data on.luckly i have install kernel auditor before flash this.change misc setting westwood to highspeed.n its seem okay for now.need to investigate more.i search kernel that can boost my gaming performance,but i too scared to try kernel auditor tweek.can u suggest to me.anyway thanks for this kernel.
@sakindia123 any plans to update the kernel..?
I tried on cm 11 ..its stable(some kind of spanish development) cpu Hotplugs were disabled by default .. .. But there was same lagg as it was before this kernel... And yes wifi stopped working too ...so yeah !!
Main error i found after installing this was my screen and home+back+menu buttons didnt work at all..
I'll try to see if it solves the touchscreen error, thanks!