Database Develop

[Q] Stuck At HTC Logo

I am running the latest herodeck rom and was wanting to try a few of the new roms out, TeamHeroC-2.3.5-01SEP-V2.zip and the newest WildHeroC rom. I do a wipe and load the roms and I never get past the HTC logo. I have waited for about 8 minutes and nothing, still stuck at the logo screen. Both roms do the same thing. Luckily I did a nandroid and was able to restore back to Herodeck. I will appreciate any help or ideas. And I am using Darch's recovery.

Hi,
U need to read the opening posts of each ROMs discussion. They each have their own ways to prepare for the ROM.
But most of them you'll need to wipe more than just factory reset.
So all I can say is take the time to read at least the first few pages of each ROM.
Good luck
Sent from my HERO200 using Tapatalk

vidaljs said:
Hi,
U need to read the opening posts of each ROMs discussion. They each have their own ways to prepare for the ROM.
But most of them you'll need to wipe more than just factory reset.
So all I can say is take the time to read at least the first few pages of each ROM.
Good luck
Sent from my HERO200 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, I always wipe everything before flashing a rom or doing a restore so I don't think that is it and I always read the post so that's probably not the problem either. But hey thanks

My similar thread
Not that this will necessarily help you but I had the same thread (and therefore issue) posted in this sub forum.
I'm not getting on to you about any repost, just makes me feel a bit better than I am not alone. Let me know if you find any solutions

!!!!cannot get droid bionic back to stock rom!!!!

I HAVE TRIED EVERYTING I KNOW ABOUT ROOTING A PHONE AND I CANT SEEM TO GET IT BACK TO STOCK ROM I TRIED RSD LIGHT FXZ FILES!! I KEEP GETTING THE ERROR WHEN IT FINISHES UNZIPPING THE FILES ABOUt Either XML format is wrong or image files associated with it are missing" when trying to open the zip. please somebody just help me get my phone back my friend rooted it and i want my stock rom back ASAP i have ics gummy. some message me back ASAP!!!!

I know you said you tried FXZ files, not sure if you tried both of these
http://forum.xda-developers.com/showthread.php?t=1507798
http://forum.xda-developers.com/showthread.php?t=1266466

Next time please consider posting in your device's Q&A forum where this properly belongs. Don't mention the 10-post dev forum rule, this doesn't belong in a dev thread.

Sry for the confusion, i was suggesting those 2 links for the methods described in each post. I do not recommend posting in either of those threads.

mpbuck03 said:
Sry for the confusion, i was suggesting those 2 links for the methods described in each post. I do not recommend posting in either of those threads.
Click to expand...
Click to collapse
No worries, I know you were trying to be helpful. The original poster just needs to understand to work within his device's forum for this type of issue next time.
Sent from my HTC Sensation 4G using xda premium

email me. and ill get back to you asap if you still need help with the bionic.
Thecoolnoob28 said:
I HAVE TRIED EVERYTING I KNOW ABOUT ROOTING A PHONE AND I CANT SEEM TO GET IT BACK TO STOCK ROM I TRIED RSD LIGHT FXZ FILES!! I KEEP GETTING THE ERROR WHEN IT FINISHES UNZIPPING THE FILES ABOUt Either XML format is wrong or image files associated with it are missing" when trying to open the zip. please somebody just help me get my phone back my friend rooted it and i want my stock rom back ASAP i have ics gummy. some message me back ASAP!!!!
Click to expand...
Click to collapse
hey, its been kind of a hobby for me to do different things with phones. I currently have the exact stock rom for the droid bionic with the safestrap apk and the blurry maxx apk which is an amazing rom for the devices. it has inverted Pandora and wifi tethering without having to pay Verizon extra money for it. email is [email protected]

Any updates?

Similar boat.
I am getting the Flash Failure (S) screen, am I posting in the right spot for some help?

What are you using to flash? A kernel or a stock ruu
Sent from my HTC6525LVW using Tapatalk

[Q] Help me ROOT my Galaxy Note!

Hello,
After coming back from holiday, my phone suddenly stopped recognising my SIM. It see's a SIM so I no longer get an (Insert SIM Message) but I can't do anything with the sim. This is what I see.
Due to this problem I tried resetting my phone to no avail, I then stumbled upon this. I thought that this was fantastic, I could fix it without going to a store or whatever.
On my quest to root my phone for the first time ever I used a guide from the reliable How-To-Geek. I did everything the guide asked me to but unfortunately my adventure came to a halt when 'SuperOneClick' kept freezing when reaching step 7.
I have never rooted my phone so I really don't know where to begin, your help would be greatly, greatly appreciated! :good:
P.S (I have never rooted or ROM'd this phone before?

Here is what you can do
Which model is it ?? International or is it a locked network ??

Anchit Mathur said:
Which model is it ?? International or is it a locked network ??
Click to expand...
Click to collapse
I guess International as it came unlocked when I got it on contract. The phone isn't locked (Never has been)

Bump

Please
What is the status right now
Does it boot?
Do u get to the system
Sent from my ME301T using Tapatalk 2

AndroidSlave said:
Please
What is the status right now
Does it boot?
Do u get to the system
Sent from my ME301T using Tapatalk 2
Click to expand...
Click to collapse
Hello, do you mean for the SIM? It is the exact same as the screenshot of my settings in the first post. This is because I didn't manage to root it yesterday
The phone is completely fine apart from the SIM problem, that's why I want to root it

The __ONLY__ Current method you should be using to root is the philz kernel method. do not use any other method.
Please go to the philz thread.
PM me if you need more help later.

AndroidSlave said:
The __ONLY__ Current method you should be using to root is the philz kernel method. do not use any other method.
Please go to the philz thread.
PM me if you need more help later.
Click to expand...
Click to collapse
Thank you very much dude,
I am slightly confused by the terms used. As you can see from my thread, I initially tried using SuperOneClick which seemed simple as it just involved installing apps on my computer and clicking 'Root'.
Currently on my phone, I don't have to backup anything as I just reset it a couple of days ago, it has its stock rom (I believe that's what it is called) Would I have to install a custom ROM or something to root my phone?
Lastly, is this the thread you are talking about?
Thank you very much again dude

Wiska said:
Thank you very much dude,
I am slightly confused by the terms used. As you can see from my thread, I initially tried using SuperOneClick which seemed simple as it just involved installing apps on my computer and clicking 'Root'.
Currently on my phone, I don't have to backup anything as I just reset it a couple of days ago, it has its stock rom (I believe that's what it is called) Would I have to install a custom ROM or something to root my phone?
Lastly, is this the thread you are talking about?
Thank you very much again dude
Click to expand...
Click to collapse
Super one click anything is either a lie and bull**** or simply not for this device
Yes that's the correct thread
Make sure to find the right one for YOUR ROM. Read the instructions carefully. No you don't need a custom ROM.
Easiest way to to flash it from stock recovery with the philz file on your external SD card if u have one

AndroidSlave said:
Super one click anything is either a lie and bull**** or simply not for this device
Yes that's the correct thread
Make sure to find the right one for YOUR ROM. Read the instructions carefully. No you don't need a custom ROM.
Easiest way to to flash it from stock recovery with the philz file on your external SD card if u have one
Click to expand...
Click to collapse
Heya!
I honestly have no idea which one to download for my Galaxy Note

Wiska said:
Heya!
I honestly have no idea which one to download for my Galaxy Note
Click to expand...
Click to collapse
In your system settings you will go yo about phone. Match the version there to the Phil version.
I still don't get why you are rooting to fix this...
I am not sure who told you rooting would fix this...
You went on vacation and came back and the sim didn't work
Did you try removing the sim and reseating it in the phone?
Sent from my GT-N7000 using Tapatalk 2

AndroidSlave said:
In your system settings you will go yo about phone. Match the version there to the Phil version.
I still don't get why you are rooting to fix this...
I am not sure who told you rooting would fix this...
You went on vacation and came back and the sim didn't work
Did you try removing the sim and reseating it in the phone?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Look at the original post. A user had the same problem and his solution was Titanium Backup Pro, he used it to clear user cache or something - this made the SIM work again.
I've taken out the SIM and everything, it works on other phones, just not mine
Lastly, about matching the version on my phone to the one on the thread:
Do I match the baseband version/Kernel Version or build number?

Wiska said:
Look at the original post. A user had the same problem and his solution was Titanium Backup Pro, he used it to clear user cache or something - this made the SIM work again.
I've taken out the SIM and everything, it works on other phones, just not mine
Lastly, about matching the version on my phone to the one on the thread:
Do I match the baseband version/Kernel Version or build number?
Click to expand...
Click to collapse
you match the kernel
Really man you MUST read the instructions in the philz thread its very clear.
Well you can try all that, I personally if it were my device would flash philz (safe kernel), boot to recovery, and just do a factory reset and see if it works... but I would only do this AFTER backing up my EFS using Ktool....
ggood luck
but if you want to try clearing cache etc first, no harm done of course
Just a side-note: regarding your links, etc that you post in the OP - I won't read those. I don't think other reputable members here will either. No offense please. I only trust sources on XDA, not random websites. If its not on xda, as far as I'm concerned, it is either incorrect or doesn't exist (i will act blind to it).

The Philz kernel for the Note is easy to find via google. Look either direct for the kernel or look for a PA installation guide and skip the odin option.

root galaxy note n7000
hi everyone... please I want best root for galaxy note n7000 jellybean 4.1.2 without problems please help me

Android-Nys said:
hi everyone... please I want best root for galaxy note n7000 jellybean 4.1.2 without problems please help me
Click to expand...
Click to collapse
There is only one root account on a galaxy note, so it is the one-and-only-best.
If you want to root your device read Dr. Ketan's thread (search for it, good excercise for your brain).
And: best rom xyz posts or threads are against XDA rules.
Just read it: your best Rom thread yesterday was closed. Repeating this won't help...

[Q] Possibly Bricked? Not 100% Sure.

So, bought my Note 3 when my contract was up on my Note 2.
Played with it for about a week, then decided to re-root like I did on my Note 2.
Downloaded the Kingo root, as it looked the simplest and then installed safestrap to eventually look at a rom.
Booted Safestrap into recovery, then set my phone next to me and started watching Role Models again. I must have layed on my phone weird or hit some buttons. Because only a Galaxy Note 3 screen is up with a big CUSTOM at the bottom.
Not too sure what I did, but I have tried almost every method of recovery to get the thing working again. So far, we are at hour 12 and I am at a complete loss. Every method either fails or says it worked, all to the same end. My phone will go to either the Download (Odin) screen, Recovery or the GN3 Logo.
Did I (literally) accidentally brick my phone? Or is this fixable?

Was your phone on 4.3 JB or 4.4.2 Latest AT&T KK? Which version of SS did you install? 3.72 or 3.71? Have you tried this http://forum.xda-developers.com/showthread.php?t=2559715 ? Or this
http://forum.xda-developers.com/showthread.php?t=2707555 ?

K-Alzwayed said:
Was your phone on 4.3 JB or 4.4.2 Latest AT&T KK? Which version of SS did you install? 3.72 or 3.71? Have you tried this http://forum.xda-developers.com/showthread.php?t=2559715 ? Or this
http://forum.xda-developers.com/showthread.php?t=2707555 ?
Click to expand...
Click to collapse
Phone was 4.3, Safestrap 3.72. The Hedimall option failed for me dozens of times so I gave up on that. I will try this other method in the morning.

burke9688 said:
Phone was 4.3, Safestrap 3.72. The Hedimall option failed for me dozens of times so I gave up on that. I will try this other method in the morning.
Click to expand...
Click to collapse
There is your problem. "4.3, Safestrap 3.72". it shoulda been 3.71 man. 3.72 is for KK. If the heimdall fails, then you need to reinstall the two packages (86x and 64x) ones and reboot your pc. Same exact thing happened to me and that fixed it. The other method will definitely work(or hopefully) ask op (@mutantblack). He's very helpful. Make sure you use 3.71 SS If you're on 4.3 JB.
Sent from my SM-N900A

K-Alzwayed said:
There is your problem. "4.3, Safestrap 3.72". it shoulda been 3.71 man. 3.72 is for KK. If the heimdall fails, then you need to reinstall the two packages (86x and 64x) ones and reboot your pc. Same exact thing happened to me and that fixed it. The other method will definitely work(or hopefully) ask op (@mutantblack). He's very helpful. Make sure you use 3.71 SS If you're on 4.3 JB.
Sent from my SM-N900A
Click to expand...
Click to collapse
I'm not sure what it means by load everything on to your external SD card. My computer doesn't detect my phone at all.

Use K-Alzawayed's first link. Follow the instructions explicitly. Use a card reader if you can't connect the phone to the computer, but first make sure you've installed the Samsung Driver on your computer.
Once you've done that you'll be on MJ5. Root the phone and turn the AT&T update app off. (You can use Link2SD to freeze it.) Then install Safestrap 3.71 and install some 4.3 ROMs. (Be careful - there are 4.3 and 4.4.2 apps here in the development thread.)
You'll probably also need to reset to MJ5 again (and allow the phone to keep updating) if you ever want the official 4.4.3 update. (I wouldn't take the 4.4.2 - unless you have a specific need for it - too many bugs for my taste, although my wife's N3 doesn't seem to have any problems.)
As far as the Custom lock, Xposed and the Wanam module will fix that - Wanam has a checkbox in the Security hacks section to set the phone back to show that it's stock (even though it's not).

Rukbat said:
Use K-Alzawayed's first link. Follow the instructions explicitly. Use a card reader if you can't connect the phone to the computer, but first make sure you've installed the Samsung Driver on your computer.
Once you've done that you'll be on MJ5. Root the phone and turn the AT&T update app off. (You can use Link2SD to freeze it.) Then install Safestrap 3.71 and install some 4.3 ROMs. (Be careful - there are 4.3 and 4.4.2 apps here in the development thread.)
You'll probably also need to reset to MJ5 again (and allow the phone to keep updating) if you ever want the official 4.4.3 update. (I wouldn't take the 4.4.2 - unless you have a specific need for it - too many bugs for my taste, although my wife's N3 doesn't seem to have any problems.)
As far as the Custom lock, Xposed and the Wanam module will fix that - Wanam has a checkbox in the Security hacks section to set the phone back to show that it's stock (even though it's not).
Click to expand...
Click to collapse
So I've gotta put my MicroSD inside the computer and load everything on there? Then back in phone and try again? I read about 10 pages of that thread and nobody covered it.

burke9688 said:
So I've gotta put my MicroSD inside the computer and load everything on there? Then back in phone and try again? I read about 10 pages of that thread and nobody covered it.
Click to expand...
Click to collapse
Yes, use a card reader to insert your external sd card in then plug into your computer then transfer whatever files you're asked to transfer to the SD card in that thread then after done, put your sd card back into your phone then go ahead with the process. I wish I had some time to chat with you on hangouts to walk you through it. I swear I'd get you back and running.
Sent from my SM-N900A

K-Alzwayed said:
Yes, use a card reader to insert your external sd card in then plug into your computer then transfer whatever files you're asked to transfer to the SD card in that thread then after done, put your sd card back into your phone then go ahead with the process. I wish I had some time to chat with you on hangouts to walk you through it. I swear I'd get you back and running.
Sent from my SM-N900A
Click to expand...
Click to collapse
Everything is done, I haven't posted until now because it's my girlfriend's 21st birthday. Everything is running, I flashed a few roms on separate rom files via that SafeStrap. Turns out I DID have the wrong version. I appreciate the help. I ended up running to Walmart and buying an 8gb Samsung card and loaded everythingo n there then back on to my phone. From there, everything started working perfectly. Though, it did completely wipe my 128gb sd card with almost 20gb of photos and videos from the last two years. But, that's fine. I didn't like half of that stuff anyways.
Thank you again for the help. I purchased the XDA premium app on my phone to try and give back a little to the community.
ALL IS GOOD!!! My Note 3 is ballin' again. I also bought 2 Hard Bricked phones (in the same situation as mine) on Craiglist today for 120 a pop. Got the both of them running and I'm flipping them for 600ea tomorrow. I'll hopefully be able to send some of that back to the website that gave me the means to fix broken phones.
Thank you again man, such simplicity in the fixing but it made all the difference.

burke9688 said:
Everything is done, I haven't posted until now because it's my girlfriend's 21st birthday. Everything is running, I flashed a few roms on separate rom files via that SafeStrap. Turns out I DID have the wrong version. I appreciate the help. I ended up running to Walmart and buying an 8gb Samsung card and loaded everythingo n there then back on to my phone. From there, everything started working perfectly. Though, it did completely wipe my 128gb sd card with almost 20gb of photos and videos from the last two years. But, that's fine. I didn't like half of that stuff anyways.
Thank you again for the help. I purchased the XDA premium app on my phone to try and give back a little to the community.
ALL IS GOOD!!! My Note 3 is ballin' again. I also bought 2 Hard Bricked phones (in the same situation as mine) on Craiglist today for 120 a pop. Got the both of them running and I'm flipping them for 600ea tomorrow. I'll hopefully be able to send some of that back to the website that gave me the means to fix broken phones.
Thank you again man, such simplicity in the fixing but it made all the difference.
Click to expand...
Click to collapse
Man, I'm so glad you're back and running. I know the feelings. It happened to me before and I got helped by @jerrycoffman45 and after swore and promised him that I'll always pass It on to however goes through the same. No problem at all. Again, I'm so glad you're good now. Keep slangin them note 3's off of Craiglist
Sent from my SM-N900A

Questions and help issues belong in Q&A and help sections
Thread moved
Thanks
FNSM

*edited* There was a question here about restoring from a bad brick from mixing up KK and JB files/roms. http://forum.xda-developers.com/showthread.php?t=2701062 saved my ass. Please ignore.

After being scared to do it, I flashed my Samsung Galaxy S 4 Active (I537) to KitKat

This is my first post and I'm going to try my best to not break a rule. If I do, I apologize in advance.
Thread thread is a sort of, "This is how I updated my phone from 4.2.2 to 4.4.2 and rooted it but your mileage may vary."
First, thanks goes to Sunderwear for his directions on how to push KitKat to the Samsung S4 Active as well as ROOT it. I rooted my 4.2.2 phone a few months ago and didn't realize doing so would prevent OTA updates. I went to the AT&T store to have them put 4.4.2 on the phone only to be told that the store didn't have the image (or whatever they said) and couldn't put it on my phone. Instead, they put 4.3, which turned out to be great because the directions pretty much have you going back to 4.3 in order to root.
BTW, if you are uninitiated, you may want to read this glossary page.
After having root in 4.2, I knew I wanted it in 4.4.2!
For the most part, I've been hesitant to flash the phone. I tried like hell to flash my first Android (Samsung S2 Skyrocket) only to brick it. (FWIW, if you can tell me how to fix it, I'd be gracious! It buzzes once and then twice and repeats.)
Anyway, I started in the thread above only to find that I now needed to download Odin. This, surprisingly, was difficult. I found this site (http://odindownload.com/) which I am convinced is some sort of hacked version of Odin because when I tried to install from there, my Symantic warned me. When I disabled it, the file tried to install a bunch of bloatware/spyware. It EVENTUALLY gave me Odin.
FYI, this thread was of no use. No download links.
Later on, after searching for something unrelated, I got to a "better" site. Unlike the link above, this site has a zip file compared to the bloat-ridden executable.
I learned that I had to use Odin 3.07 and NOT Odin 3.09. Odin 3.09 did not have the PDA button that would be central to me flashing the ROM to the phone.
I started my journey on the thread for the Stock AT&T Firmware Collection. I learned that the thread uses the last three characters of the build name to identify the build. For example, 4.3's build name is I537UCUBML2 but was referred to as "ML2". This was a bit confusing but I got the hang of it. I then went over to the 4.4.2 rooting thread. It was there that I read Sunderwear says that you need to downgrade to 4.3 to root 4.4. I was grateful that AT&T only updated me to 4.3!
Sunderwear's second post described how to root 4.4.2 if you had a rooted 4.3. Since I hadn't done that yet, I proceeded back to the firmware collection and found the thread to root my 4.3 phone.
I downloaded the files and loaded up the first file to flash. I made the mistake of keeping my phone plugged in while trying to put it in download mode. It was when I stumbled upon this page that gave me the clue that my phone had to be disconnected first before going into download mode.
Once done, I clicked Start and Odin flashed my phone! It took about 2-3 minutes.
The next step was to do saferoot. The thread didn't link it so here it is.
SafeRoot requires your phone to be in USB debugging mode. Directions were found by googling. You go to Settings, About Device, and click Build Number until you get a message saying you have enabled developer mode. Then go back out one screen and go into Debugging options and enable USB debugging.
One installed I rebooted the phone and everything worked...except for wifi and "some other stuff". The thread warned you about this so I didn't worry. I flashed the next file and rebooted. Updated SuperSU and everything worked!!
I verified that I had root by installing Root Checker.
All was great with 4.3! Now for what turned out to be the more agonizing part: Upgrading to 4.4.2.
Going back to the 4.4.2 rooting thread, I learned that all I needed to do was install SafeTrap to update to KitKat and then flash a couple more files. I downloaded pwnedkitkat.zip (link in the thread) and then installed SafeTrap. I presume that SafeTrap is some sort of bootstraping method of updating the firmware.
I copied the SafeTrap apk file, along with pwnedkitkat and the updated superSU zip files to my external SD card. Once everything was copied, I installed SafeTrap and then opened it. SafeTrap then offered me the option to install Recovery Mode. Once done, I restarted my phone.
I noticed a new splash screen after the Samsung splashscreen. I clicked the Menu button (left of home) to start the recovery process. I clicked "Install" and pointed it to the pwnedkitkat.zip file. This took the longest. Probably took 15 minutes but felt like an eternity. I wasn't sure if my phone bricked when the screen turned off! But upon turning it back on, it was still going.
The bar moved very slowly. But remained patient. After a long 15-20 minutes, it updated! SafeTrap gave me the option to reboot there but I followed the directions and installed SuperSU from the SD card. It was a quick install.
I restarted the phone! I was done!! Right?
My phone got stuck on the AT&T splash screen! I started to panic! What did I do wrong?!
I missed Sunderwear's step five:
5.Put your phone in download mode and flash the 4.4.2 stock boot.tar.md5 kernel and your phone will boot after a few minutes with root access enabled.
Click to expand...
Click to collapse
Goes to show you to read everything. I missed it due to the line break. I downloaded the boot.tar.md5 file and put the phone back into download mode and push it via PDA in Odin (I presume PDA. It wasn't explicit.)
After a few hours of chewing my nails and wondering if I bricked it:
http://imgur.com/a/UFg6u#F5qFTdq
So thanks to everyone! Now if I could only unbrick my Skyrocket!

Outstanding instructions! Thank you for this. I wish all the instructions were as clear and detailed as this is.
:good:

I tried like hell to flash my first Android (Samsung S2 Skyrocket) only to brick it. (FWIW, if you can tell me how to fix it, I'd be gracious! It buzzes once and then twice and repeats.)
Click to expand...
Click to collapse
do you mean it vibrates every 2 seconds and doesn't turn on?

:good:

Great instructions and great story. Sounds like what most people like me go through every time we try to do something like this.

jimmietilt said:
do you mean it vibrates every 2 seconds and doesn't turn on?
Click to expand...
Click to collapse
Yup. The last time I looked into this was almost two years ago. It just sits in my drawer now.

dajabec said:
Great instructions and great story. Sounds like what most people like me go through every time we try to do something like this.
Click to expand...
Click to collapse
I think what got me was all the new terminology and unfamiliarity of flashing. Jailbreaking an iPhone (which I've done before I had an Android) is pretty simple. It's pretty much point and click. But ROMs, flashing...these all have definitions which can be a bit overwhelming, even to a technical person such as myself. I've compiled Linux kernels from scratch!
But there's something about making your phone unusable. Something that I cannot live without, especially as I'm searching for a job.
It's nerve-wracking and I especially got nervous when I was putting KitKat on since it took so long. But overall, I'm glad I did it.

Mike, I wish everyone's instructions were like yours. I am in a similar boat as you, currently on 4.2.2 rooted and unable to do an OTA. I am not really sure what to do as I do not want my phone to be wiped. Did you bring your phone to an ATT store or a Device Support Center? And when they flashed 4.3 did your phone lose anything?

Agent. said:
Mike, I wish everyone's instructions were like yours. I am in a similar boat as you, currently on 4.2.2 rooted and unable to do an OTA. I am not really sure what to do as I do not want my phone to be wiped. Did you bring your phone to an ATT store or a Device Support Center? And when they flashed 4.3 did your phone lose anything?
Click to expand...
Click to collapse
Backup using Samsung kies and go find the 4.3 Odin package. Hell I just use the Google backup feature which is good enough for me.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app

rdh28 said:
Backup using Samsung kies and go find the 4.3 Odin package. Hell I just use the Google backup feature which is good enough for me.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't want to go through all of the trouble of reconfiguring all of my settings, restoring all of my app specific stuff, and just getting everything back the way I had it. Does Kies backup every little thing or just app data and contacts etc?

Agent. said:
I don't want to go through all of the trouble of reconfiguring all of my settings, restoring all of my app specific stuff, and just getting everything back the way I had it. Does Kies backup every little thing or just app data and contacts etc?
Click to expand...
Click to collapse
Not sure but if you really want to upgrade it's worth the thirty minutes it takes to reconfigure
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app

Agent. said:
I don't want to go through all of the trouble of reconfiguring all of my settings, restoring all of my app specific stuff, and just getting everything back the way I had it. Does Kies backup every little thing or just app data and contacts etc?
Click to expand...
Click to collapse
Use Titanium Backup. Just make sure you don't restore system apps and you'll be fine.

rdh28 said:
Not sure but if you really want to upgrade it's worth the thirty minutes it takes to reconfigure
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know, I will probably do it this summer, I'm just really busy right now and can't afford to risk anything happen to my phone
Devo7v said:
Use Titanium Backup. Just make sure you don't restore system apps and you'll be fine.
Click to expand...
Click to collapse
The system apps are one of the primary issues as that is what needs to be reconfigured, other apps can be backed up and restored easily.

Agent. said:
I am not really sure what to do as I do not want my phone to be wiped. Did you bring your phone to an ATT store or a Device Support Center? And when they flashed 4.3 did your phone lose anything?
Click to expand...
Click to collapse
I took mine to the AT&T device support center. I called before going in and they pretty much told me it was going to be destructive. I had previously wiped my phone earlier that day in the hopes that it would receive the OTA update.
I'm not going to lie: it's nerve-wracking, but straight forward. I know sometimes it helps to have someone hold your hand while you do it. And for me, it was definitely in the camp of, "What am I going to do if my phone craps out on me?"
But like what someone else said: you can back up your settings within Keis. I didn't. I just did a wipe. I backed up my photos but that's about it. Everything else was in the cloud. The one thing I should have done was transfer my Authenticator keys to another device because I couldn't log into AWS (which does not give out backup codes like Google). I did end up switching to Authy (I can't link to it since I'm such a new user but you can find it in the Play Store) which allows you to have more than one device. It shares your secret key between devices so it's technically less secure. But I needed the flexibility in case my phone crapped out on me again.
Pro Tip: to install all your apps again, go to the Google play store on your device and click "My Apps". Long hold one of the apps and then select the check boxes of the apps you want to install.

And hey if you run into anything there's plenty of people who check this forum regularly. I've managed to root 4.2.2 , 4.3, and 4.4.2 while retaining full functionality, just from this forum...the information is out there good luck!!
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app

Agent. said:
I know, I will probably do it this summer, I'm just really busy right now and can't afford to risk anything happen to my phone
The system apps are one of the primary issues as that is what needs to be reconfigured, other apps can be backed up and restored easily.
Click to expand...
Click to collapse
What system apps need to be reconfigured? I can't really see that many that it would take you more than 15 to 20 minutes.

Thank you guys, I need to get my phone serviced anyway as there is a yellow dot in the top left of the screen that won't go away. So if AT&T sends me a new phone I can do all of the dirty work and then transfer everything side by side from the old device. If they won't for whatever reason I will do what you guys suggested. So just to be clear I should follow the instructions to Odin to 4.3, root, then follow the upgrade/root instructions to 4.4.2?

Agent. said:
So just to be clear I should follow the instructions to Odin to 4.3, root, then follow the upgrade/root instructions to 4.4.2?
Click to expand...
Click to collapse
I personally thing this is better since if you have 4.4.2 already, you have to downgrade to 4.3, root it and then put 4.4.2 on it.