hey guys... im just looking can swap sd card in mini 2 ??? anyone know?? please help ...
themaskreturnz said:
hey guys... im just looking can swap sd card in mini 2 ??? anyone know?? please help ...
Click to expand...
Click to collapse
Ok, swap for which rom ?
you'll need a root explorer and root
for stock 2.3 :
open this file a text editor system/etc/vold.fstab (after copying it somewhere as a backup)
when it says #internal put sdcard1 instead of sdcard and where it says #external put sdcard where it says sdcard1 (if you make an error you wont see any sd card on your phone after reboot you'll have to edit again btw i'm not responsible for anything)
and if your sdcard is called sdcard0 and external sdcard1 same way but put these values
for cm10.1 and cm10 :
edit system/build.prop go to #usb sexion and the line that does what you want is self explaining just make its value 1
for cm9:
go to settings/storage click menu button and select usb config and check the only option you'll see it is called use internal sd i guess
hope it helped , i have never had a problem with this but backup is a good option , hope it helped
Sent from my GT-S6500D using XDA Free mobile app
MaDaLiNoSt said:
Ok, swap for which rom ?
Click to expand...
Click to collapse
stock rom mybe..
pocthird said:
you'll need a root explorer and root
for stock 2.3 :
open this file a text editor system/etc/vold.fstab (after copying it somewhere as a backup)
when it says #internal put sdcard1 instead of sdcard and where it says #external put sdcard where it says sdcard1 (if you make an error you wont see any sd card on your phone after reboot you'll have to edit again btw i'm not responsible for anything)
and if your sdcard is called sdcard0 and external sdcard1 same way but put these values
for cm10.1 and cm10 :
edit system/build.prop go to #usb sexion and the line that does what you want is self explaining just make its value 1
for cm9:
go to settings/storage click menu button and select usb config and check the only option you'll see it is called use internal sd i guess
hope it helped , i have never had a problem with this but backup is a good option , hope it helped
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
can make more simple like http://forum.xda-developers.com/showthread.php?t=2690038&page=3 *this is for ace plus GT7500.. thanks
thanx button ?
and btw u realy think it is easier to download ,reboot to recovery,flash a file than writing two words ? ok
Sent from my GT-S6500D using XDA Free mobile app
pocthird said:
thanx button ?
and btw u realy think it is easier to download ,reboot to recovery,flash a file than writing two words ? ok
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
no i means can in SGM2 also using same method ??? because i not understand method ur give ... btw :good::good:
paste the content of the file system/etc/vold.fstab here after reading it with a text editor like kingsoft office or send it to me and i will edit it for you
Sent from my GT-S6500D using XDA Free mobile app
pocthird said:
paste the content of the file system/etc/vold.fstab here after reading it with a text editor like kingsoft office or send it to me and i will edit it for you
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
this ??
can you try to replace its content with this one ? it should work , dont forget to mount system as read and write (rw)
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
Sent from my GT-S6500D using XDA Free mobile app
pocthird said:
can you try to replace its content with this one ? it should work , dont forget to mount system as read and write (rw)
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
after i try this sd card and usb stroge cannot mount n all above show UNAVAILABLE ... why??? n how 2 solve this??
themaskreturnz said:
after i try this sd card and usb stroge cannot mount n all above show UNAVAILABLE ... why??? n how 2 solve this??
Click to expand...
Click to collapse
sorry my mistake , here is the fully edited one (it didn't save when i quited the text editor ) :
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard/external_sd 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
tested and working with my gts6500d
if this is not working i'm going to tell you how to get back to normal state as i made a backup before editing
pocthird said:
sorry my mistake , here is the fully edited one (it didn't save when i quited the text editor ) :
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard/external_sd 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
tested and working with my gts6500d
if this is not working i'm going to tell you how to get back to normal state as i made a backup before editing
Click to expand...
Click to collapse
can ur make more easy and simple instruction ...like "link" iam give upper post... ??
first replace your vold.fstab with the one in attachment , and dont forget to first rename the one in attachment from "'vold.fstab.txt" to "vold.fstab"
if it doesn't work try this app i didnt try it , but for me the way i gave is working
http://www.google.com/url?sa=t&sour...jJdhNHinDGbocABl5ZJDTJg&bvm=bv.68235269,d.d2k
Sent from my GT-S6500D using XDA Free mobile app
Guys, where is the option to enable Swap SD? there is an option in cm9 tho but not 10.1 ...
Sent from my GT-S6500 using XDA Free mobile app
TiTAN-O-One said:
Guys, where is the option to enable Swap SD? there is an option in cm9 tho but not 10.1 ...
Sent from my GT-S6500 using XDA Free mobile app
Click to expand...
Click to collapse
in 10.1 edit build.prop , you'll find it in system folder , of course you will have to use root explorer or anything that lets you edit system files , open build.prop with a text editor like kingsoft office and in the usb sexion (under the line #usb and storage or something like that ) find this line :
persist.sys.vold.switchexternal=0 ;
and make it =1
like this : persist.sys.vold.switchexternal=1
save and exit and reboot
ps: move the apps installed in internal sd to external or they will be broken
hope it helps
Related
Hi,
i know that it´s in general possible to swap the mount point of the internal sdcard with the external_sd on android devices by editing /etc/vold.fstab (root required of course).
I tried different (for me) logical changes on my Galaxy Note, which i adapted by the instructions for other gingerbread smartphones. Sadly i had no luck, every attempt resulted in not recognizing of both memory (internal & external) after reboot. Replacing the modified vold.fstab by the saved original always returns the device to normal operation after next reboot, so there is no real risk to try.
Maybe someone can help?
Here is the content of the original vold.fstab:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/s3c_otghcd/usb
#end line ## keep this line
Perhaps somewhere the UID of the partitions will be checked ...
What can be read in the logfile about the try of mount int/ext-SD-Card?
Busy trying to accomplish this as well. Maybe this procedure here will work?: http://forum.xda-developers.com/showthread.php?t=1422158
Have anybody checked it? Is it suitable for our device?
Sent from my GT-N7000 using XDA
Here's what you need to swap your internal and external storage.
vold.fstab(Dropbox Link):
http://db.tt/dYphJzwV
Download the file from the link above. Navigate to "/system/etc/" and rename "vold.fstab" to "vold.fstab.bak" and paste the downloaded file. Reboot into recovery and wipe your dalvik cache. Reboot system and enjoy. I've been using this with a 64GB SD card for months. I love it!
Edit: DO NOT USE ON ICS!!!
Sent from my GT-N7000 using Tapatalk
Works perfectly - sweeeet!!! Thanks a lot. Any plans to make this work on ICS?
could someone pleace reupload the file for gingerbread thanks
will it work for t-mobile USA samsung s3?
net.lander said:
will it work for t-mobile USA samsung s3?
Click to expand...
Click to collapse
i don't think its possible..
either way, the file is not available anymore.. from the DB link..
Please help to me- I wanna swap memorys to, but i do not know what need change in my vold.fstab file, My original vold.fstab file :
HTML:
# Copyright (c) 2011, Code Aurora Forum. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Code Aurora Forum, Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#LGE_CHANGE_S [[email protected]] 20121008:Mount point for eMMC and sdcard
dev_mount sdcard /storage/sdcard0 auto /devices/platform/msm_sdcc.3/mmc_host
#dev_mount sdcard1 /storage/external_SD auto /devices/platform/msm_sdcc.1/mmc_host
Hi everyone,
Need help on my internal sdcard swapping. Below is my vold.fstab. (l'm on 4.1.2 jb)
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
## storage_struct - ex) series, "/mnt/sdcard/extStorages" / parallel
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = disable
}
dev_mount sdcard /storage/extSdCard auto /devices/sdi0/mmc_host/mmc1/mmc1
#usb host device
{
media_type = usb
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/msm_hsusb_host.0
#EOF
Sent from my GT-I8190N using xda app-developers app
...
howard bamber said:
There are plenty of apps to do this. Tool box pro has it built in, to send all new apps to YOUR SD.
From box 13......
Click to expand...
Click to collapse
Hey, sorry if this has been asked before but I wanted to know how I could make the Market download apps directly to my microSD card. I do not see an option for it and when I try to use app2SD, it moves my apps to the internal storage which it counts as the sd card and Icdon't see an option to move them to the external SD card.
I am on stock 2.3.6 rooted with Franco's kernel.
Sent from my GT-N7000 using xda premium
I managed to swap the internal and external storage in the vold.fstab file so now my mSD card is the internal storage but when I try to move an app from my phone memory to the SD Card, it tells me my card is full but my card still has 5x GBs left since it's a 64GB microSD.
I know it's probably something in the vold.fstab file but I have no idea what since I don't do any coding and such... so it'd be great if someone could tell me what's wrong.
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/s3c_otghcd/usb
#end line ## keep this line
How flip memory of SIII Mini ..
File vold.fstab and very different from others
please
help me to change the vold.fstab S3 Mini
Samsung galaxy mini S3 system\etc\vold.fstab and system\etc\vold.conf
What should i change here to swap from internal to external ?
Vod.fstab:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
## storage_struct - ex) series, "/mnt/sdcard/extStorages" / parallel
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = disable
}
dev_mount sdcard /storage/extSdCard auto /devices/sdi0/mmc_host/mmc1/mmc1
#usb host device
{
media_type = usb
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/msm_hsusb_host.0
#usb host device
{
media_type = usb
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/msm_hsusb_host.0
#EOF
Here now the vold.conf:
## vold configuration file for the emulator/SDK
volume_sdcard {
## This is the direct uevent device path to the SD slot on the device
emu_media_path /devices/platform/goldfish_mmc.0/mmc_host/mmc0
media_type mmc
mount_point /sdcard
ums_path /devices/platform/usb_mass_storage/lun0
}
Coould anybody help ! Thankyou very much !
Up! Please help with this
I need vold.fstab from a S3 mini GT-I8190N or GT-I8190
mikael2933 said:
I need vold.fstab from a S3 mini GT-I8190N or GT-I8190
Click to expand...
Click to collapse
If you mean the file, here you go
mauam said:
If you mean the file, here you go
Click to expand...
Click to collapse
And that we do with it? Do you know if it will work in the Lostvirginity v2 or the carbon rom?
D-Mak said:
And that we do with it? Do you know if it will work in the Lostvirginity v2 or the carbon rom?
Click to expand...
Click to collapse
I have no idea. Just upload it for the member
mauam said:
I have no idea. Just upload it for the member
Click to expand...
Click to collapse
The one that your you have put only are they 1 or 2 lines? And the original one is very long. Not....
D-Mak said:
The one that your you have put only are they 1 or 2 lines? And the original one is very long. Not....
Click to expand...
Click to collapse
I don't even look to it bud, only upload it
Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example
Shying said:
Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example
Click to expand...
Click to collapse
And /mnt/sdcard1 is external, what you cant you understand?
limnaln said:
And /mnt/sdcard1 is external, what you cant you understand?
Click to expand...
Click to collapse
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist
Shying said:
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist
Click to expand...
Click to collapse
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.
Rohitdahiya said:
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.
Click to expand...
Click to collapse
Yep, someplaces its sdcard1, someplaces external_sdcard.
ok guys it's work but when i use camera it's fine, but fast reboot when i want install app, tryed with root browse and whatsapp...what i have to do? tryed with 3Wipe and formatting sd but always reboot after downloading an app and during install
I think, you should change ROM to another (for example CyanogenMod) and try one more time.
jako_tako said:
I think, you should change ROM to another (for example CyanogenMod) and try one more time.
Click to expand...
Click to collapse
i can't because my internal sd is corrupted and when i tryed to install cm 10.2 it say "waiting sd mount 20s" :crying:
my sd card is /sdcard/external_sd auto....it isn't /mnt/sdcard/external_sd...and i don't know why...and this change can't find my internal sdcard any idea?
Maybe i can try this solution:
Code:
For i9000, Do the FULL wipes and factory reset first (formating the Internal SD card will greatly help, so safe all your contacts, images backups to PC or Ext SD card First) Use i9000 Rescue kit with heimdall or on linux , select files as follows...
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
The reboot may request for "Confirm password", just enter any password about 5 times until prompted that, "this will wipe the card." Yes wipe, ..Should solve the problem
but only found hotfile's link that not working now
i have tap P1000 with damage internal memory and i do this post with this method
1-Format the external sdcard with 3 partitions all of them primery I used a 16 GB card with the follwing
Partition 1: 9 GB Fat 32
Partition 2: 5 GB ext4
Partition 3: 100MB Fat 32
2- download this file GB-Stock-Safe-v5.zip from 4shared.com/zip/HTtNUmFx/GB-Stock-Safe-v5.html?cau2=403tNull&ua=WINDOWS
3-remove 2 files hidden.rfs and movinand.mst
3- boot to recovery mode and flash the file GB-Stock-Safe-v5 after remove to files hidden.rfs and movinand.mst with odin 3 v1.85
after restart i found this error
--updating application...
E:can't open directory '/preload/app/' . (no such file or directory )
copy application failed .
cant access to 'system/csc/seb/system/'
but i continue :silly:
4- boot to recovery mode and flash Overcome_Kernel_v4.0.0 i downloaded from androidfilehost.com/?fid=9390225151984927181
and by adb edit file vold.fstab
to be :
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# /sys/devices/platform/usb_mass_storage/lun0/file
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = disable
format_option = -r 1558
}
dev_mount sdcard /mnt/sdcard 1 /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = enable
}
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2 /devices/platform/s3c-sdhci.2/mmc_host/mmc1
#end line ## keep this line
and after this the tap is hang with sound say invalid data partition time is delayed 50 minute data operation restore operation so what can i do >>>>:silly:
Any update
??? any update ???
???
In your vold example, you are assuming the chip is still showing up. If that is not the case, your internal and external storage may get swapped around now and then depending on when the broken one showing up or not.
You may want to open up the tab and remove the broken chip. If not, depending on how broken it is, some chips are still showing up now and then.
Remove the chip, partition external, and you don't have to modify the rom.
Sent from my GT-N7100 using XDA Free mobile app
Thanks
priyana said:
In your vold example, you are assuming the chip is still showing up. If that is not the case, your internal and external storage may get swapped around now and then depending on when the broken one showing up or not.
You may want to open up the tab and remove the broken chip. If not, depending on how broken it is, some chips are still showing up now and then.
Remove the chip, partition external, and you don't have to modify the rom.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks Thanks Thanks Thanks
you want to remove the internal Memory so can i fix it before remove it .
I think it is broken anyway. Can't fix it.
Sent from my GT-N7100 using XDA Free mobile app