Database Develop

[Q] Vold.fstab file problem

Hi, I'm new here, new as registered but I've been reading this forum a long time, but well, here is my problem.
I was following a tutorial to exchange my external sd card for my internal sd card, so I could install there anything I wish, but I screwed it!
One step of that tutorial was erase the information of the vold.fstab file located at /etc and later rewrite with another, exactly this:
Original vold.fstab file
## Vold 2.0 NVIDIA Whistler fstab
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## 20100725, [email protected], Add 2nd external memory
dev_mount extsdcard /mnt/sdcard/_ExternalSD auto /devices/platform/tegra-sdhci.2/mmc_host/mmc1 /devices/platform/tegra-sdhci.2/mmc_host/mmc0
dev_mount sdcard /mnt/sdcard auto /devices/platform/tegra-sdhci.3/mmc_host/mmc2
Moded vold.fstab file
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
dev_mount sdcard /mnt/sdcard auto /devices/platform/tegra-sdhci.2/mmc_host/mmc1
dev_mount extsdcard /mnt/sdcard/_ExternalSD 9 /devices/platform/tegra-sdhci.3/mmc_host/mmc2
I did it from my device, and after reboot, I couldn't open camera, gallery, and the most important thing, now my device doesn't read internal or external SD card, so I can't do anything, my question is How can I manage to get the original vold.fstab file, I tried editing it and paste the original vold.fstab information, but that doesn't work, and I haven't done a backup either...
PS: Sorry for my bad english
PS2: I'm a dumb
PS3: Thanks for reading!

I had similar issue with my other phone. I had two choices - reinstall ROM in CWR or place vold.fstab in /system/etc throught ADB. I don't know if it will help you.

PykaTux said:
I had similar issue with my other phone. I had two choices - reinstall ROM in CWR or place vold.fstab in /system/etc throught ADB. I don't know if it will help you.
Click to expand...
Click to collapse
I thought that if I could get another vold.fstab file and paste in the /etc I would fix the issue, but I can't connect the mobile to the pc and I can't download files from my device either, so what is ADB and how can I put a vold.fstab file again using just the device? Thanks ^^

My phone is trash now I guess...

Just flash stock ROM with nvflash or smartflash

i lost my original vold.fstab. how can i solve it ? anyone ?

Same situation here ;( I replace the moded vold.fstab but it didn't work. Also, I haven't done a backup.
So, how can I replace the original vold.fstab?
Android MIUI Rom

knowing which rom + OS you're on might help.

I tried ADB before and I replaced the original vold.fstab but the sd card is still not available.(USB debug mode)
Here's my steps:
cd c:\SDK\tools,
adb devices,
adb remount,
adb push ./"vold.fstab" /system/etc
Any wrong step? Or any more solution? PLEASE HELP ME!!!
Android MIUI Rom

Sounds like ur on Windows. That's basically what i wanted to know.
Do
Code:
adb push vold.fstab /system/etc

sry for doublepost, i failed.

It doesn't work as usual, anyway thanks.
I reflash a rom, and thats work.

How to make Market download apps directly to microSD card?

Hey, sorry if this has been asked before but I wanted to know how I could make the Market download apps directly to my microSD card. I do not see an option for it and when I try to use app2SD, it moves my apps to the internal storage which it counts as the sd card and Icdon't see an option to move them to the external SD card.
I am on stock 2.3.6 rooted with Franco's kernel.
Sent from my GT-N7000 using xda premium

I managed to swap the internal and external storage in the vold.fstab file so now my mSD card is the internal storage but when I try to move an app from my phone memory to the SD Card, it tells me my card is full but my card still has 5x GBs left since it's a 64GB microSD.
I know it's probably something in the vold.fstab file but I have no idea what since I don't do any coding and such... so it'd be great if someone could tell me what's wrong.
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/s3c_otghcd/usb
#end line ## keep this line

[Q] SD card problem after JB update

Hi, I'm new here. I looked around for a similar problem to mine but haven't seen it. Please be kind if I have missed it.
I finally updated from GB last night to ICS and then to JB. I've got root again finally. Now the problem is that I don't have access to my SD card.
My system version is: 98.72.18.XT894.Verizon.en.US
Android version is 4.1.2
Before the update I had swapped the SD card with the internal storage through void.fstab. To avoid problems with the update I restored the original fstab file to swap them back. Now these are the symptoms I see:
When I go to Settings > Storage, it force closes and I get the error "Unfortunatly, Settings has stopped."
When I browse to /sdcard in Root Explorer it says "The SD card is not currently mounted"
When I browse to /sdcard-ext in Root Explorer it just shows an empty folder
When I stuck the SD card in my computer, I could see everything I had on there before the update
Currently I'm using the original void.fstab file, but even when I try to switch, nothing changes. This is the original void.fstab I am using right now:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point[:[asec_point]:[lun_point]]> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## asec_point - Whether asec mount is needed for this value, if not, use "none"
## Else, supply a folder name under /mnt/secure/
## If not supplied, "asec" will used by default
## If supplied, /mnt/secure/asec_point will be used
## This is for further extension, not needed now
## lun_point - The target lun device for this volume. If not supplied, will use
## /sys/devices/platform/usb_mass_storage/lun0/file
## else, will use /sys/devices/platform/usb_mass_storage/lun_point/file
## part - Partition # (1 based), or 'auto' for first usable partition.
## For a disk with only 1 partition, use '1' is different to 'auto'
## Using 1, will not re-write its partition table when formatting
## <sysfs_path> - List of sysfs paths to source devices
######################
# external sd card
dev_mount sdcard-ext /storage/sdcard1:none:lun1 auto /devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0
# internal eMMC
dev_mount sdcard /storage/sdcard0:: 25 /devices/platform/omap/omap_hsmmc.1/mmc_host/mmc1
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# flash drive connection through hub connected to USB3
dev_mount usbdisk_1.1.1 /storage/usbdisk_1.1.1 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.1.1
dev_mount usbdisk_1.1 /storage/usbdisk_1.1 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.1
dev_mount usbdisk_1.2 /storage/usbdisk_1.2 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.2
dev_mount usbdisk_1.3 /storage/usbdisk_1.3 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.3
dev_mount usbdisk_1.4 /storage/usbdisk_1.4 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.4
dev_mount usbdisk_1.5 /storage/usbdisk_1.5 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.5
dev_mount usbdisk_1.6 /storage/usbdisk_1.6 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.6
dev_mount usbdisk_1.7 /storage/usbdisk_1.7 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.7
Has anybody else had this problem? Does anybody have any suggestions on what to do here? Thank you for any help you can provide!

Yea!!
Actually I'm surprised that I'm not the only one, but it seems like this is a small problem. I can't mount internal or sd storage, and when I go into settings to mount, settings cashes. The phone WAS rooted when I updated from ICS.

jthree2001 said:
Actually I'm surprised that I'm not the only one, but it seems like this is a small problem. I can't mount internal or sd storage, and when I go into settings to mount, settings cashes. The phone WAS rooted when I updated from ICS.
Click to expand...
Click to collapse
So I got it to work, I re-flashed JB using the Matt's jb flash thingy without the SDcard, and it corrected itself. I should also note that I had an extra partition on my sdcard so I think it had something to do with it.

jthree2001 said:
So I got it to work, I re-flashed JB using the Matt's jb flash thingy without the SDcard, and it corrected itself. I should also note that I had an extra partition on my sdcard so I think it had something to do with it.
Click to expand...
Click to collapse
Ok, I just reset to factory default, but it still crashed when I tried to open up Storage in Settings right after the reset. What is this "Matt's jb flash thingy" and where can I get it?
*EDIT*: Are you possibly talking about the post on droidforums titled "DROID RAZR Utility XT912 Jellybean" by mattlgroff (can't link to it yet)? I think that's what I used originally. I'm going to try it again, but I've formatted my SD card and am no longer root after the factory reset. Hopefully it works this time.

Internal/external memory

Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example

Shying said:
Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example
Click to expand...
Click to collapse
And /mnt/sdcard1 is external, what you cant you understand?

limnaln said:
And /mnt/sdcard1 is external, what you cant you understand?
Click to expand...
Click to collapse
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist

Shying said:
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist
Click to expand...
Click to collapse
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.

Rohitdahiya said:
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.
Click to expand...
Click to collapse
Yep, someplaces its sdcard1, someplaces external_sdcard.

ok guys it's work but when i use camera it's fine, but fast reboot when i want install app, tryed with root browse and whatsapp...what i have to do? tryed with 3Wipe and formatting sd but always reboot after downloading an app and during install

I think, you should change ROM to another (for example CyanogenMod) and try one more time.

jako_tako said:
I think, you should change ROM to another (for example CyanogenMod) and try one more time.
Click to expand...
Click to collapse
i can't because my internal sd is corrupted and when i tryed to install cm 10.2 it say "waiting sd mount 20s" :crying:
my sd card is /sdcard/external_sd auto....it isn't /mnt/sdcard/external_sd...and i don't know why...and this change can't find my internal sdcard any idea?

Maybe i can try this solution:
Code:
For i9000, Do the FULL wipes and factory reset first (formating the Internal SD card will greatly help, so safe all your contacts, images backups to PC or Ext SD card First) Use i9000 Rescue kit with heimdall or on linux , select files as follows...
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
The reboot may request for "Confirm password", just enter any password about 5 times until prompted that, "this will wipe the card." Yes wipe, ..Should solve the problem
but only found hotfile's link that not working now

[q] swap sd card mini 2

hey guys... im just looking can swap sd card in mini 2 ??? anyone know?? please help ...

themaskreturnz said:
hey guys... im just looking can swap sd card in mini 2 ??? anyone know?? please help ...
Click to expand...
Click to collapse
Ok, swap for which rom ?

you'll need a root explorer and root
for stock 2.3 :
open this file a text editor system/etc/vold.fstab (after copying it somewhere as a backup)
when it says #internal put sdcard1 instead of sdcard and where it says #external put sdcard where it says sdcard1 (if you make an error you wont see any sd card on your phone after reboot you'll have to edit again btw i'm not responsible for anything)
and if your sdcard is called sdcard0 and external sdcard1 same way but put these values
for cm10.1 and cm10 :
edit system/build.prop go to #usb sexion and the line that does what you want is self explaining just make its value 1
for cm9:
go to settings/storage click menu button and select usb config and check the only option you'll see it is called use internal sd i guess
hope it helped , i have never had a problem with this but backup is a good option , hope it helped
Sent from my GT-S6500D using XDA Free mobile app

MaDaLiNoSt said:
Ok, swap for which rom ?
Click to expand...
Click to collapse
stock rom mybe..

pocthird said:
you'll need a root explorer and root
for stock 2.3 :
open this file a text editor system/etc/vold.fstab (after copying it somewhere as a backup)
when it says #internal put sdcard1 instead of sdcard and where it says #external put sdcard where it says sdcard1 (if you make an error you wont see any sd card on your phone after reboot you'll have to edit again btw i'm not responsible for anything)
and if your sdcard is called sdcard0 and external sdcard1 same way but put these values
for cm10.1 and cm10 :
edit system/build.prop go to #usb sexion and the line that does what you want is self explaining just make its value 1
for cm9:
go to settings/storage click menu button and select usb config and check the only option you'll see it is called use internal sd i guess
hope it helped , i have never had a problem with this but backup is a good option , hope it helped
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
can make more simple like http://forum.xda-developers.com/showthread.php?t=2690038&page=3 *this is for ace plus GT7500.. thanks

thanx button ?
and btw u realy think it is easier to download ,reboot to recovery,flash a file than writing two words ? ok
Sent from my GT-S6500D using XDA Free mobile app

pocthird said:
thanx button ?
and btw u realy think it is easier to download ,reboot to recovery,flash a file than writing two words ? ok
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
no i means can in SGM2 also using same method ??? because i not understand method ur give ... btw :good::good:

paste the content of the file system/etc/vold.fstab here after reading it with a text editor like kingsoft office or send it to me and i will edit it for you
Sent from my GT-S6500D using XDA Free mobile app

pocthird said:
paste the content of the file system/etc/vold.fstab here after reading it with a text editor like kingsoft office or send it to me and i will edit it for you
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
this ??

can you try to replace its content with this one ? it should work , dont forget to mount system as read and write (rw)
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
Sent from my GT-S6500D using XDA Free mobile app

pocthird said:
can you try to replace its content with this one ? it should work , dont forget to mount system as read and write (rw)
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
after i try this sd card and usb stroge cannot mount n all above show UNAVAILABLE ... why??? n how 2 solve this??

themaskreturnz said:
after i try this sd card and usb stroge cannot mount n all above show UNAVAILABLE ... why??? n how 2 solve this??
Click to expand...
Click to collapse
sorry my mistake , here is the fully edited one (it didn't save when i quited the text editor ) :
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard/external_sd 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
tested and working with my gts6500d
if this is not working i'm going to tell you how to get back to normal state as i made a backup before editing

pocthird said:
sorry my mistake , here is the fully edited one (it didn't save when i quited the text editor ) :
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
format_option = -r 2236
}
dev_mount sdcard1 /mnt/sdcard/external_sd 23 /devices/platform/msm_sdcc.3/mmc_host/
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
format_option = -r 2236
}
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line ## keep this line
tested and working with my gts6500d
if this is not working i'm going to tell you how to get back to normal state as i made a backup before editing
Click to expand...
Click to collapse
can ur make more easy and simple instruction ...like "link" iam give upper post... ??

first replace your vold.fstab with the one in attachment , and dont forget to first rename the one in attachment from "'vold.fstab.txt" to "vold.fstab"
if it doesn't work try this app i didnt try it , but for me the way i gave is working
http://www.google.com/url?sa=t&sour...jJdhNHinDGbocABl5ZJDTJg&bvm=bv.68235269,d.d2k
Sent from my GT-S6500D using XDA Free mobile app

Guys, where is the option to enable Swap SD? there is an option in cm9 tho but not 10.1 ...
Sent from my GT-S6500 using XDA Free mobile app

TiTAN-O-One said:
Guys, where is the option to enable Swap SD? there is an option in cm9 tho but not 10.1 ...
Sent from my GT-S6500 using XDA Free mobile app
Click to expand...
Click to collapse
in 10.1 edit build.prop , you'll find it in system folder , of course you will have to use root explorer or anything that lets you edit system files , open build.prop with a text editor like kingsoft office and in the usb sexion (under the line #usb and storage or something like that ) find this line :
persist.sys.vold.switchexternal=0 ;
and make it =1
like this : persist.sys.vold.switchexternal=1
save and exit and reboot
ps: move the apps installed in internal sd to external or they will be broken
hope it helps