Related
I am trying to go back to pre update...any help? sprint..
donniegood said:
I am trying to go back to pre update...any help? sprint..
Click to expand...
Click to collapse
With the AT&T and retail(tmobile) versions of 4.4 you can roll back to the OTA updated version of 4.2.2 by downloading the full image and then flashing with rsdlite.
I am not sure if Motorola changed/updated anything anything further with the 4.4 Sprint image.
This is a link to the file you would use with Sprint:
http://sbfdownload.droid-developers....X-116-MX-17-6-2-11-release-keys-cid9.xml.zip
Steve-x said:
With the AT&T and retail(tmobile) versions of 4.4 you can roll back to the OTA updated version of 4.2.2 by downloading the full image and then flashing with rsdlite.
I am not sure if Motorola changed/updated anything anything further with the 4.4 Sprint image.
This is a link to the file you would use with Sprint:
http://sbfdownload.droid-developers....X-116-MX-17-6-2-11-release-keys-cid9.xml.zip
Click to expand...
Click to collapse
I no longer have RSD lite can you point me in that direction??
edit NM found it
[deleted]
Well that didn't work.... Flashboot failure ... Now after being stuck in flashbooot I cannot get service
Sent from my Nexus 7 using Tapatalk 4
Hi all,
My phone is using G900AUCU2AND3. It has been rooted and I also removed a lot of bloatware with Titanium Backup. Because of this, OTAs are failing.
I would like to flash the stock rom G900AUCU2AND3 again, so I can do that. However, I haven't been able to find it.
I only found G900AUCU1ANCE.
If I flash that ROM with ODIN, since that I'm downgrading, will I run into any issues?
Thanks a lot for your help.
the AND3 software is not out. if you have to fix a hard brick, bootloop or want a fresh start, you will need to downgrade to the ANCE firmware, flashing via odin.
i root SGH i777 said:
the AND3 software is not out. if you have to fix a hard brick, bootloop or want a fresh start, you will need to downgrade to the ANCE firmware, flashing via odin.
Click to expand...
Click to collapse
Thanks. I will do that then.
Regards
_LEM_ said:
Thanks. I will do that then.
Regards
Click to expand...
Click to collapse
This file, flashed via odin, will downgrade you to stock NCE ( minus the bootloader). Once on NCE you can take the ota update to the latest firmware, NG3:
https://www.androidfilehost.com/?fid=23622183712464416
muniz_ri said:
This file, flashed via odin, will downgrade you to stock NCE ( minus the bootloader). Once on NCE you can take the ota update to the latest firmware, NG3:
https://www.androidfilehost.com/?fid=23622183712464416
Click to expand...
Click to collapse
Thanks. I was planning to flash this:
http://www.sammobile.com/firmwares/download/28224/G900AUCU1ANCE_G900AATT1ANCE_ATT.zip/
Isn't that the same? Just to double check.
_LEM_ said:
Thanks. I was planning to flash this:
http://www.sammobile.com/firmwares/download/28224/G900AUCU1ANCE_G900AATT1ANCE_ATT.zip/
Isn't that the same? Just to double check.
Click to expand...
Click to collapse
The file from sammobile includes the NCE bootloader. Since you already updated the bootloader to ND3 you are unable to downgrade the BL back to NCE, hence my file minus the NCE BL.
muniz_ri said:
The file from sammobile includes the NCE bootloader. Since you already updated the bootloader to ND3 you are unable to downgrade the BL back to NCE, hence my file minus the NCE BL.
Click to expand...
Click to collapse
I understand now. Thanks a lot!
So i get an i537 locked on AT&T ion ebay by almost 100 bucks so i decided to buy it instead an S3 because for the price was a better choice , thinking that i could unlock "free" but then i realized that i could do it but i had to have the zx3 box.... thing that i did'nt have and i am not going to buy it . So i had to buy the unlock code almost for 15 bucks on ebay with a link from a store of Spain, took me around 4 days to have it. The first thing that i wanted to do was root it, i hate bloatware, so i rooted it and leave the stock rom, yesterday i saw in gsmarena.com that it was getting Lollipop via OTA, so i had to restore it back in order to get it. Mine was running I537UCUCNH3 but i couldn't get the full firmware that is almost 1 gb or something like that so by mistake i get the I537UCUCNE3 to flash on odin.
It flash with no problems but then i get the problem that i didn't have the radio service, so i flashed the modem bin from here http://forum.xda-developers.com/showthread.php?t=2689218, after that i get signal and check for the update and it begins to download, almost an hour and a half then it begins to install the update and reboot and when it was on 28% it turned off and reboot. Then it says firmware was not installed and checked for the update and it says that is up to date check in XX hours again. I checked the band version and was on UCUAMF1 but with the I537UCUCNE3 version so i think that i flash it wrong and may be in the process of the update as is does not match it failed the update.
Now i can't restore again the modem.bin because it fails so i need urgent help to restore it and the lollipop update
tonochito said:
So i get an i537 locked on AT&T ion ebay by almost 100 bucks so i decided to buy it instead an S3 because for the price was a better choice , thinking that i could unlock "free" but then i realized that i could do it but i had to have the zx3 box.... thing that i did'nt have and i am not going to buy it . So i had to buy the unlock code almost for 15 bucks on ebay with a link from a store of Spain, took me around 4 days to have it. The first thing that i wanted to do was root it, i hate bloatware, so i rooted it and leave the stock rom, yesterday i saw in gsmarena.com that it was getting Lollipop via OTA, so i had to restore it back in order to get it. Mine was running I537UCUCNH3 but i couldn't get the full firmware that is almost 1 gb or something like that so by mistake i get the I537UCUCNE3 to flash on odin.
It flash with no problems but then i get the problem that i didn't have the radio service, so i flashed the modem bin from here http://forum.xda-developers.com/showthread.php?t=2689218, after that i get signal and check for the update and it begins to download, almost an hour and a half then it begins to install the update and reboot and when it was on 28% it turned off and reboot. Then it says firmware was not installed and checked for the update and it says that is up to date check in XX hours again. I checked the band version and was on UCUAMF1 but with the I537UCUCNE3 version so i think that i flash it wrong and may be in the process of the update as is does not match it failed the update.
Now i can't restore again the modem.bin because it fails so i need urgent help to restore it and the lollipop update
Click to expand...
Click to collapse
Flash the NE3 Odin package again and then flash the NH3 OTA update. Assuming that your radios are working you should get the OC6 update right away. Just be aware that currently there is no way to root OC6 and may never be, plus there is no way to downgrade back to a firmware that is rootable.
The issue you're running in to is that the updater checks all the files on the phone before installing the update. If all the files match what it thinks should be there then it will update just fine. If anything is changed, any system files, modems, or even if you've just rooted the update will fail to install as you've seen.
Devo7v said:
Flash the NE3 Odin package again and then flash the NH3 OTA update. Assuming that your radios are working you should get the OC6 update right away. Just be aware that currently there is no way to root OC6 and may never be, plus there is no way to downgrade back to a firmware that is rootable.
The issue you're running in to is that the updater checks all the files on the phone before installing the update. If all the files match what it thinks should be there then it will update just fine. If anything is changed, any system files, modems, or even if you've just rooted the update will fail to install as you've seen.
Click to expand...
Click to collapse
No i don't have the NH3 OTA i have the previous one and the post is very annoying and confusing for me, i have this one SGH-I537UCUCNE3_v4.4.2_ATT_ALL but now i can't get service as i mentioned now if i flash the modem.bin it fails i think that i bricked it.
And yes i kow that if something does not match on a system update it will fail, had the same sittuation on the HTC One m7 when it was going to lollipop update but i just flashed the correct firmware and it worked but with this one i am havig a hardtime, because has the baseband version unknown but i can't flash the modem.bin
tonochito said:
No i don't have the NH3 OTA i have the previous one and the post is very annoying and confusing for me, i have this one SGH-I537UCUCNE3_v4.4.2_ATT_ALL but now i can't get service as i mentioned now if i flash the modem.bin it fails i think that i bricked it.
And yes i kow that if something does not match on a system update it will fail, had the same sittuation on the HTC One m7 when it was going to lollipop update but i just flashed the correct firmware and it worked but with this one i am havig a hardtime, because has the baseband version unknown but i can't flash the modem.bin
Click to expand...
Click to collapse
Open the i537 Firmware Thread for links to all firmware
Reflash the NE3 Odin package
Flash the NH3 OTA file
Flash the OC6 OTA file
Devo7v said:
Open the i537 Firmware Thread for links to all firmware
Reflash the NE3 Odin package
Flash the NH3 OTA file
Flash the OC6 OTA file
Click to expand...
Click to collapse
Yes i have flahed that one and i have no signal but none of the firmware updates works both fails. One says footer is wrong the oficial one may i have to downgrade all the way till 4.3?
tonochito said:
Yes i have flahed that one and i have no signal but none of the firmware updates works both fails. One says footer is wrong the oficial one may i have to downgrade all the way till 4.3?
Click to expand...
Click to collapse
Did you read through the [HOW-TO][GUIDE] Install Any i537 Firmware? It explains exactly how to install any firmware you want. I know why you're having problems flashing the OTA's, but it seems like you haven't read how to flash them.
Devo7v said:
Did you read through the [HOW-TO][GUIDE] Install Any i537 Firmware? It explains exactly how to install any firmware you want. I know why you're having problems flashing the OTA's, but it seems like you haven't read how to flash them.
Click to expand...
Click to collapse
yes i have read it, it flash with no problems but weird part is that yesterday it worked fine but when i got the signal fix it shows on system version I537UCUCNE3 but band version was on MF1 an not on NE3. I can't remember what exactly i did after lollipop update fail but now i can't get the modem.bin working. So i guess that something went wrong during flash yesterday that now i can't fix the signal
tonochito said:
yes i have read it, it flash with no problems but weird part is that yesterday it worked fine but when i got the signal fix it shows on system version I537UCUCNE3 but band version was on MF1 an not on NE3. I can't remember what exactly i did after lollipop update fail but now i can't get the modem.bin working. So i guess that something went wrong during flash yesterday that now i can't fix the signal
Click to expand...
Click to collapse
The signal fix flashes the MF1 modems, that is why your band version says MF1; you're actually using modems from a older firmware.
These are exactly the steps you need to follow:
Start over and flash the NE3 Odin package. It doesn't matter if you have a signal or not because you should have already downloaded the OTA files with your computer ahead of time.
Once you're on stock NE3 (without modifying the modem), flash the NH3 OTA. Instructions on how to do that are described in detail in the i537 Firmware Guide.
Once you're on stock NH3, flash the OC6 OTA file. Instructions are described in detail in the i537 Firmware Guide.
If you still don't have a signal after you're on OC6, then try the Modem fix, but it may not work.
Basically what you need to do is follow the instructions step by step in the section titled "NE3 to OC6".
Devo7v said:
The signal fix flashes the MF1 modems, that is why your band version says MF1; you're actually using modems from a older firmware.
These are exactly the steps you need to follow:
Start over and flash the NE3 Odin package. It doesn't matter if you have a signal or not because you should have already downloaded the OTA files with your computer ahead of time.
Once you're on stock NE3 (without modifying the modem), flash the NH3 OTA. Instructions on how to do that are described in detail in the i537 Firmware Guide.
Once you're on stock NH3, flash the OC6 OTA file. Instructions are described in detail in the i537 Firmware Guide.
If you still don't have a signal after you're on OC6, then try the Modem fix, but it may not work.
Basically what you need to do is follow the instructions step by step in the section titled "NE3 to OC6".
Click to expand...
Click to collapse
well yes i did but weird part is that now i had to flash the second one the ml2 but still shows mf1,when i got the active it was on nh3 and i remember that i flashed the mf1.
But i am trying to do as says the post, no changing anything but i get that footer wrong and signature failed and the baseband unknow or may be something in that file is corrpupted i am using Odin 3.07 and the firmware after using winrar is 2.33 gb
tonochito said:
well yes i did but weird part is that now i had to flash the second one the ml2 but still shows mf1,when i got the active it was on nh3 and i remember that i flashed the mf1.
But i am trying to do as says the post, no changing anything but i get that footer wrong and signature failed and the baseband unknow or may be something in that file is corrpupted i am using Odin 3.07 and the firmware after using winrar is 2.33 gb
Click to expand...
Click to collapse
Are you saying that you can no longer flash the NE3 Odin package?
Devo7v said:
Are you saying that you can no longer flash the NE3 Odin package?
Click to expand...
Click to collapse
yes i can but i can't flash any of the nh3 firmware and remais with the unknown base band, perphaps the kernel was bricked? now i remember that i tried to do the steps of z3x box and happens the same situation unknown baseband
tonochito said:
yes i can but i can't flash any of the nh3 firmware and remais with the unknown base band, perphaps the kernel was bricked? now i remember that i tried to do the steps of z3x box and happens the same situation unknown baseband
Click to expand...
Click to collapse
So you can reflash the NE3 Odin package, that's good. I understand you don't have a baseband, but we need to make sure you can update your phone to NH3 and OC6 before we try to fix that. What exactly does your phone say when you try to flash the NH3 update? Maybe posting a photo would be easier.
Also check that the MD5 of the files you downloaded matches the MD5 posted in the i537 Firmware Thread. If the MD5's match then you have a good download, if they don't match then you have a corrupted download and need to redownload the files.
Devo7v said:
So you can reflash the NE3 Odin package, that's good. I understand you don't have a baseband, but we need to make sure you can update your phone to NH3 and OC6 before we try to fix that. What exactly does your phone say when you try to flash the NH3 update? Maybe posting a photo would be easier.
Also check that the MD5 of the files you downloaded matches the MD5 posted in the i537 Firmware Thread. If the MD5's match then you have a good download, if they don't match then you have a corrupted download and need to redownload the files.
Click to expand...
Click to collapse
it's very weird why i can't flash the NH3, trust me i have since yesterday i have tried but no luck, i have followed all steps and fails
tonochito said:
it's very weird why i can't flash the NH3, trust me i have since yesterday i have tried but no luck, i have followed all steps and fails
Click to expand...
Click to collapse
What file is inside the update.zip file you created? Can I see a screenshot from your computer?
Devo7v said:
What file is inside the update.zip file you created? Can I see a screenshot from your computer?
Click to expand...
Click to collapse
the cfg
tonochito said:
the cfg
Click to expand...
Click to collapse
Honestly, I have no idea why it isn't working. I would suggest downloading the file again (make sure the MD5's match), I'm going to upload another copy I have and send you a link to it to try.
tonochito said:
the cfg
Click to expand...
Click to collapse
Wait did you put the cfg inside a zip?! You have to rename 240058.cfg to update.zip, not compress it to a zip archive. Or did I misunderstand your post?
Devo7v said:
Honestly, I have no idea why it isn't working. I would suggest downloading the file again (make sure the MD5's match), I'm going to upload another copy I have and send you a link to it to try.
Click to expand...
Click to collapse
i did it twice from the post and from another guy who upload the same file, that's the reason that i was thinking to downgrade to 4.3 but may be i won't be able to do it
Give this file a shot. I know for a fact people have downloaded it and updated to NH3 successfully.
thisisapoorusernamechoice said:
Wait did you put the cfg inside a zip?! You have to rename 240058.cfg to update.zip, not compress it to a zip archive. Or did I misunderstand your post?
Click to expand...
Click to collapse
i have done both things the problem is that i don't have baseband flashing the stock file of NC3 after i try to update to NH3 it fails no matter i do so i can't install lollipop, i have baseband flashing the old modem.bin but can't install the updates
My gyro quit working and through the diagnostic where you dial *#0*# i get fail or no readings.
I'm running AllianceROM©v8 Lite but I need to roll back to stock. Do I just need to flash the stock 5.0 rom? Or do I need to roll back to KK and do it that way? Thanks in advance:good:
dusto2k3 said:
My gyro quit working and through the diagnostic where you dial *#0*# i get fail or no readings.
I'm running AllianceROM©v8 Lite but I need to roll back to stock. Do I just need to flash the stock 5.0 rom? Or do I need to roll back to KK and do it that way? Thanks in advance:good:
Click to expand...
Click to collapse
Which phone do you have. S5 or s5 active. Did you do the update to 5.0 via Muniz method it are you still on 4.4.x
dirtydodge said:
Which phone do you have. S5 or s5 active. Did you do the update to 5.0 via Muniz method it are you still on 4.4.x
Click to expand...
Click to collapse
I did the update via Muniz, and it's the s5 running 5.0
What is gyro?
jimwick said:
What is gyro?
Click to expand...
Click to collapse
it tells the orientation of your phone, it's what rotates your phone when you tilt it, compass, lots of things.
dusto2k3 said:
I did the update via Muniz, and it's the s5 running 5.0
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3076803
Download the nce downgrade file in the OP. And you'll be unrooted. Remember that ATT will most likely update you to 5.0 after they fix it or they will give you a phone with 5.0 on it most likely. if they replace it.
dirtydodge said:
http://forum.xda-developers.com/showthread.php?t=3076803
Download the nce downgrade file in the OP. And you'll be unrooted. Remember that ATT will most likely update you to 5.0 after they fix it or they will give you a phone with 5.0 on it most likely. if they replace it.
Click to expand...
Click to collapse
Thank you. What does what mean for me as the user? less work?
dusto2k3 said:
Thank you. What does what mean for me as the user? less work?
Click to expand...
Click to collapse
If they update you to 5.0 you won't be able to root. If they give you a replacement phone with 5.0 on it, you won't be able to root. There is no root for 5.0 right now.
dirtydodge said:
If they update you to 5.0 you won't be able to root. If they give you a replacement phone with 5.0 on it, you won't be able to root. There is no root for 5.0 right now.
Click to expand...
Click to collapse
well, I tried to flash that file in odin and I got SW rev check fail.
dusto2k3 said:
well, I tried to flash that file in odin and I got SW rev check fail.
Click to expand...
Click to collapse
Maybe a bad download? I've used it many times. Just put it in the ap slot using odin 3.09 and it should work. I'm not sure what SW rev check is.
dirtydodge said:
Maybe a bad download? I've used it many times. Just put it in the ap slot using odin 3.09 and it should work. I'm not sure what SW rev check is.
Click to expand...
Click to collapse
haha, yeah bad download. Redownloaded, flashed, and gyro works fine....should I let it do the OTA update?
dusto2k3 said:
haha, yeah bad download. Redownloaded, flashed, and gyro works fine....should I let it do the OTA update?
Click to expand...
Click to collapse
If you want root, DO NOT DO THE OTA. If you don't care about root then ota will be ok. If you want root on 5.0 then use Muniz method in the op of that thread i posted to you.
dirtydodge said:
If you want root, DO NOT DO THE OTA. If you don't care about root then ota will be ok. If you want root on 5.0 then use Muniz method in the op of that thread i posted to you.
Click to expand...
Click to collapse
Ahh, I'm bummed, the gyro stopped working after I downgraded, and now I can't get it to work. Looks like I'm going to have to send it in.
I'm trying to update my smg900a that has service with cricket currently on build OI5 how do I get to PA2
bigfnfil said:
I'm trying to update my smg900a that has service with cricket currently on build OI5 how do I get to PA2
Click to expand...
Click to collapse
Flash with Odin or download the ota's.
I can't find the ota and tbh I'm not exactly sure what file I need to download
bigfnfil said:
I can't find the ota and tbh I'm not exactly sure what file I need to download
Click to expand...
Click to collapse
Download the file here: http://forum.xda-developers.com/att-galaxy-s5/general/g900aucs4cpa2-odin-files-em-hot-t3372388 and flash via Odin.
Would you happen to know if there is a zip file I can use to flash via my sd card I currently don't have a pc to flash with odin
bigfnfil said:
Would you happen to know if there is a zip file I can use to flash via my sd card I currently don't have a pc to flash with odin
Click to expand...
Click to collapse
I can't find any OI5 to PA1, but I did find an OF3 to PA1.
Can I flash OF3 to PA1 even though I'm on OI5
bigfnfil said:
Can I flash OF3 to PA1 even though I'm on OI5
Click to expand...
Click to collapse
No the base need to be on OF3.
And how do I get to that base
bigfnfil said:
And how do I get to that base
Click to expand...
Click to collapse
There isn't any way to downgrade other than using Odin.