D 958 Update problem

D 958 Update problem - LG G Flex

I have a g flex d958 rooted,after ota update occurs only with lg logo. What can I do?

megatooth said:
I have a g flex d958 rooted,after ota update occurs only with lg logo. What can I do?
Click to expand...
Click to collapse
I am also facing this kind of problem when tried to OTA update my D958

Use this guide.
Download these files (if you have D958):
1- sbl1.bin
2- aboot.bin
3- rpm.bin
4- tz.bin
5- recovery.bin
From here.
Make sure to add your account name in terminal command. Eg: "dd if=/home/your name/Desktop/sbl1.img of=/dev/sdb2"
You can use a virtual machine.
Before doing any of the above steps enter download mode using these:
-Turn off you phone by pressing for 15 sec on power button.
-Then, while holding volume up button connect your usb cable.
-You should see your phone in device manager as qhsusb_bulk. Install qhsusb_dload drivers in device manager using browse and locating the 32bit driver file.
Then you just follow the guide and it's fairly easy.
Good luck!

Hi Megatooth,
You writen in folder of autoprime "1- sbl1.bin" but in ex. yo was writen "dd if=/home/your name/Desktop/sbl1.img of=/dev/sdb2"
which format file need *.bin or *.img ??

Related

Help O2x bricked nvflash not working

Hi i recently tried to install a recovery from rom manager, but it installed one for g2x so then nothing could mount in recovery and when i tried to flash, something failed and now my device is bricked. I then found this guide http://forum.xda-developers.com/showthread.php?t=1229407&page=5 which i was able to recognise my device as a NVIDIA usb boot recovery drive but every time i press flash-recovery.bat and chose the partition, it says nvflash is not recognised as a command.... and whenever i press nvflash.exe itself, the cmd window appears for one second and it disappears. The package has all the drivers for nvflash but it doesnt friggin work. HELP

You need to flash an entire rom with nvflash, because you messed up the partition table (p990 and p999 have different partitions). With this guide you'll flash only the recovery...
After that you need to flash a proper baseband
Have you a g2x or an o2x?

iliatay said:
and whenever i press nvflash.exe itself, the cmd window appears for one second and it disappears. The package has all the drivers for nvflash but it doesnt friggin work. HELP
Click to expand...
Click to collapse
I have the same problem as him. Anyhelp?

I think you may try to reflash your device with the original firmware (KDZ file) which you can download from LG. Whole process is described in here:
http://forum.xda-developers.com/showpost.php?p=18946763
Please note that recently LG has changed something in their tools and now you have to "fool" them to do what you want them to. Please see this thread for details:
http://forum.xda-developers.com/showthread.php?t=1473781
Hope this will help you.

if it says that nvflash is not a recognised command, then edit the .bat to point to your nvflash.exe instead of just saying nvflash. (C:\path\to\your\nvflash.exe)

langhaardack said:
if it says that nvflash is not a recognised command, then edit the .bat to point to your nvflash.exe instead of just saying nvflash. (C:\path\to\your\nvflash.exe)
Click to expand...
Click to collapse
u can try this http://forum.xda-developers.com/showthread.php?t=1498021
i have tryed to ease the things to understand.

i had the same problem.
i downloaded these files:
http://uploaded.to/file/dkq74mlh
http://uploaded.to/file/2azotnvs
unpacked the files (important is that you put all files from the driver zip in one folder)
click volume + and volume - while connecting to your computer and it will recognize it
You go to device manager, right click on the apx ,update driversoftware, search on the computer for driver software, choose the folder you've put the driver files
then you can start flash.bat

[Stock][HC][3.2.1] Ideapad K1 + 3rd party apps (Bootloader fix)

This is a completely a stock Rom for the Lenovo Ideapad K1 Tablet. This is the latest update Honeycomb version 3.2.1, update 14_14_120109.
This will work for those lucky few who are plagued by the bootloader error when trying to apply the latest OTA.
Unsupported menu option selected: 1
Unrecoverable bootloader error (0x00000002)
It does include all the original third party apps.
If you do not want the third party apps
Before flashing
1. Open the 'files' directory
2. Rename userdata.img to userdata.img.bak
3. Rename userdata_blank.img to userdata.img
This Rom is NOT rooted
Nvflash Windows Drivers
md5sum: 9aa3a4814ca63366329d85a22ed01f64
To boot into APX mode
1. Power off
2. Hold down the Vol - and the Vol +
3. While holding the Volume keys down, Power on
4. The display should go black, and both LED's on either side of the home button should light up. This is APX mode. If using Windows make sure the drivers are installed
Instructions
Windows
1. Extract the K1_Stock_120109.zip contents to a directory
2. Double click the "flash-windows.bat" file
3. After the flash completes if you get any force closes you may have to do a factory reset. Settings > Privacy > Factory data reset
Linux
1. Extract the K1_Stock_120109.zip contents to a directory
2. Open a terminal and cd into the extracted directory
3. Copy and paste the following command
Code:
chmod a+x ./flash-linux.sh && chmod a+x ./files/nvflash
4. Run either
Code:
sudo ./flash-linux.sh
or from a root prompt
Code:
./flash-linux.sh
5. After the flash completes if you get any force closes you may have to do a factory reset. Settings > Privacy > Factory data reset
Download
K1_Stock_120109.zip
md5sum: 1ba3c55b4bfbd50495aeb22e66617629
Mirror - androidfileshare.com
Thanks to Whitesnake for being the Guinea Pig while we figured out what was causing the bootloader issue.

Umm.. Whitesnake.. not whitehawk LOL

Looks like you put together a super package...
But I've got problems:
NVflash isn't working for me...
I just get an error:
Code:
C:\Adb\K1\NVFlash>nvflash -w
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
My device is stuck in bootloops from flashing direct to K1_A301_13_13_111209_US.zip by renaming it update.zip and putting it in the Downloads folder.
Any idea what's going on? Should I just try to return it straight away?
EDIT: I'm bulled a bone head move. I was testing out nvflash, but in a directory without the files it needs! ha! All's well...

Is this tools can applied to umts model?

Hey broo I really apreciatte your work but the links are down and I really need this because I got that Famous Bootloop.
Thanks

thanks for the mirror, but a little cuestion: the nvflash drivers are the same for all the tegra 2 devices?... cause the link of the nvflash driver is down...
thanks¡¡

I want to use this w/o the 3rd party apps but there is no userdata_blank.img file to rename. Sorry if it's a noob question.

Links dead
Please reupload.

Just get Kaschemme NVflash, his are current.
Sent from my Touchpad using XDA Premium HD app

is there a similar solution for thinkpad ?
mine boots directly to "Booting Kernel Recovery Image" and hangs for a few second then powers down.

hello,
plz update download links

lg l90 405 is believed to be 410 dual sim

hi to all guys, I would like to draw your attention to what happened to me, and possibly know how to restore.
I am owner of a lg l90 model d405n, wanting to unlock the bootloader I used an application that I would have to just unlock the bootloader and install a modified recovery.
Actually 'cell after this hack is pretty much dead, he would not turn either.
I started looking for various tools and various programs in vain, the cell showed no signs of life.
Then, now giving it up for lost, I tried to go for broke, I low-level formatted, and then with an application (umbrick) I could flesciare boot and everything else. Now the cell was lit and was also in mode 'upgrade download.
I downloaded the firmware of KDZ 405 and I tried to use flash tool but the procedure is always blocked to 2%, giving an error.
With the tool of 'LG blatantly that I discovered the phone was identified as d410, exhausted by the various trials do not go into port I wanted to download the KDZ model 410d and, as if by magic, flash tool worked! I installed the latest version and the phone works wonders!
So now I have a cell phone with firmware that is not his (among other things the 410d is also dual sim).
I would like to restore its system orifginale, that of the 405, but I'm afraid to do other **** ....
I hope someone can help me out

sebasrul21 said:
hi to all guys, I would like to draw your attention to what happened to me, and possibly know how to restore.
I am owner of a lg l90 model d405n, wanting to unlock the bootloader I used an application that I would have to just unlock the bootloader and install a modified recovery.
Actually 'cell after this hack is pretty much dead, he would not turn either.
I started looking for various tools and various programs in vain, the cell showed no signs of life.
Then, now giving it up for lost, I tried to go for broke, I low-level formatted, and then with an application (umbrick) I could flesciare boot and everything else. Now the cell was lit and was also in mode 'upgrade download.
I downloaded the firmware of KDZ 405 and I tried to use flash tool but the procedure is always blocked to 2%, giving an error.
With the tool of 'LG blatantly that I discovered the phone was identified as d410, exhausted by the various trials do not go into port I wanted to download the KDZ model 410d and, as if by magic, flash tool worked! I installed the latest version and the phone works wonders!
So now I have a cell phone with firmware that is not his (among other things the 410d is also dual sim).
I would like to restore its system orifginale, that of the 405, but I'm afraid to do other **** ....
I hope someone can help me out
Click to expand...
Click to collapse
Did you still have your stock bootloader backup?

neverdies said:
Did you still have your stock bootloader backup?
Click to expand...
Click to collapse
unfortunately no

Stock bootloader (aboot and abootb) can be retrieved from your model KDZ. Every partition, except modemst1 & 2 can be re-flashed from the KDZ.
But the bootloader alone won't do anything, you must flash the entire bootstack of D405n, enter in Donwload Mode again and LG Flash Tool will allow you to flash the entire KDZ again in Emergency Mode without errors.
If you IMEI was lost or changed, it can be restored with other programs after.

F. Gacrux said:
Stock bootloader (aboot and abootb) can be retrieved from your model KDZ. Every partition, except modemst1 & 2 can be re-flashed from the KDZ.
But the bootloader alone won't do anything, you must flash the entire bootstack of D405n, enter in Donwload Mode again and LG Flash Tool will allow you to flash the entire KDZ again in Emergency Mode without errors.
If you IMEI was lost or changed, it can be restored with other programs after.
Click to expand...
Click to collapse
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )

sebasrul21 said:
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )
Click to expand...
Click to collapse
the premise that no sd card , I have to flash aboot ? adb push aboot.bin ? what are the steps for not briccarlo again ?

sebasrul21 said:
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )
Click to expand...
Click to collapse
Answer so I can give you the proper response :
- Rooted?
- Unlocked bootloader?
- Custom recovery (twrp)?
- Variant model and country.
- Carrier model (if yes, which carrier)?

F. Gacrux said:
Answer so I can give you the proper response :
- Rooted?
- Unlocked bootloader?
- Custom recovery (twrp)?
- Variant model and country.
- Carrier model (if yes, which carrier)?
Click to expand...
Click to collapse
rooted yes
unlock bootloader I think not , how does a SEE?
custom recovery no
the phone is a lg d405n but now has become lg d410 dual sim version sw v20 - op1 - hq version Android 5.0.2 Italy no carrier

There is no way to know if the bootloader is unlocked, unless you make aboot partition image and hash check to compare with the original bootloader.
You have first to flash the hacked bootloader (aboot), since you don't know if it's unlocked, it won't hurt to flash again.
First enable USB debugging, at this point I assume you know how to do this.
Download the hacked aboot for D405n v20a:
http://www.mediafire.com/download/bn39rz7ojtosqm3/D405n_v20a_patched_aboot.zip (taken from this thread: http://forum.xda-developers.com/lg-l90/development/recovery-twrp2-7-1-0lgl90w7xxshoxx-t2826150)
Extract the zip and copy aboot.bin to the root of your sdcard. Open android terminal ou adb, take su permission and allow it on your phone screen, flash the hacked bootloader with:
If you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Now flash custom recovery. Download http://forum.xda-developers.com/devdb/project/dl/?id=13334 (taken from the same thread).
Copy TWRP_2.8.7.0_270615_L90.img to the root of your sdcard. To make things easier, rename it to recovery.img. Take su permission and flash with adb or android terminal with:
If you copied to the external microSD: dd if=/storage/external_SD/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
If you copied to the internal sd: dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now reboot into twrp custom recovery, you can either send reboot recovery command in adb shell or terminal, or with your phone off, hold VOL - and PWR button, when lg logo appears, release and hold PWR button again until a blank screen appears, select YES twice (navigate with VOL buttons and PWR to select). Since now you are on custom recovery, twrp will boot instead a factory reset routine.
Download your D405n bootstack: https://www.androidfilehost.com/?fid=24052804347759484 (taken from this thread: http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632)
Copy to your sdcard (do not extract the file). In TWRP recovery, select INSTALL and flash the zip.
Download your italy D405n v20a lollipop kdz: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW932KU032N9A1T29B55QPQ/D405n20a_00.kdz
Follow this thread to flash with LG Flash Tool (if you already have usb drivers installed, start at step 5): http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
If you face force closes after the first boot, do a factory reset (VOL- and PWR button, like I described before, but since now you are all stock, factory reset will be applied).
Now you are 100% on your italy d405n v20a lollipop.

F. Gacrux said:
There is no way to know if the bootloader is unlocked, unless you make aboot partition image and hash check to compare with the original bootloader.
You have first to flash the hacked bootloader (aboot), since you don't know if it's unlocked, it won't hurt to flash again.
First enable USB debugging, at this point I assume you know how to do this.
Download the hacked aboot for D405n v20a:
http://www.mediafire.com/download/bn39rz7ojtosqm3/D405n_v20a_patched_aboot.zip (taken from this thread: http://forum.xda-developers.com/lg-l90/development/recovery-twrp2-7-1-0lgl90w7xxshoxx-t2826150)
Extract the zip and copy aboot.bin to the root of your sdcard. Open android terminal ou adb, take su permission and allow it on your phone screen, flash the hacked bootloader with:
If you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Now flash custom recovery. Download http://forum.xda-developers.com/devdb/project/dl/?id=13334 (taken from the same thread).
Copy TWRP_2.8.7.0_270615_L90.img to the root of your sdcard. To make things easier, rename it to recovery.img. Take su permission and flash with adb or android terminal with:
If you copied to the external microSD: dd if=/storage/external_SD/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
If you copied to the internal sd: dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now reboot into twrp custom recovery, you can either send reboot recovery command in adb shell or terminal, or with your phone off, hold VOL - and PWR button, when lg logo appears, release and hold PWR button again until a blank screen appears, select YES twice (navigate with VOL buttons and PWR to select). Since now you are on custom recovery, twrp will boot instead a factory reset routine.
Download your D405n bootstack: https://www.androidfilehost.com/?fid=24052804347759484 (taken from this thread: http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632)
Copy to your sdcard (do not extract the file). In TWRP recovery, select INSTALL and flash the zip.
Download your italy D405n v20a lollipop kdz: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW932KU032N9A1T29B55QPQ/D405n20a_00.kdz
Follow this thread to flash with LG Flash Tool (if you already have usb drivers installed, start at step 5): http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
If you face force closes after the first boot, do a factory reset (VOL- and PWR button, like I described before, but since now you are all stock, factory reset will be applied).
Now you are 100% on your italy d405n v20a lollipop.
Click to expand...
Click to collapse
thank you so much I immediately start work hoping to do no harm

sebasrul21 said:
thank you so much I immediately start work hoping to do no harm
Click to expand...
Click to collapse
perdona un altra cosa, io in questo momento non uso schede microsd, come cambia questa: "if you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot"

sebasrul21 said:
perdona un altra cosa, io in questo momento non uso schede microsd, come cambia questa: "if you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot"
Click to expand...
Click to collapse
forgive one other thing , I do not at this time use cards microSD , as changes this

I gave you the two options, to copy the necessary files to microSD or internal memory, and what part you didn't understand?
If you don't use microSD, you must use the internal SD command (If you copied to the internal sd: dd if=/sdcard/... etc).
In android, both storage is called SD, the internal one that comes with the phone is the internal SD (sdcard0, media, sdcard, etc), the other one that you stick in the phone is the external SD (external_SD).

sebasrul21 said:
thank you so much I immediately start work hoping to do no harm
Click to expand...
Click to collapse
I run everything perfectly but in the end , When I go to run the flash tool gives me Error
"upgrade because of error ...
lg mobile support tool detects : sw : D41020A LG V500 version sw : V50020F are AVAILABLE agggiornamenti :crying:

sebasrul21 said:
I run everything perfectly but in the end , When I go to run the flash tool gives me Error
"upgrade because of error ...
lg mobile support tool detects : sw : D41020A LG V500 version sw : V50020F are AVAILABLE agggiornamenti :crying:
Click to expand...
Click to collapse
flash tool: Wait until software extraction is complete. stop

sebasrul21 said:
flash tool: Wait until software extraction is complete. stop
Click to expand...
Click to collapse
continues to be invecie 410 of 405

upgrade stopped due to an error

This is not possible. If you flashed D405n bootstack, there is no way LG Flash Tool recognize your phone as D410.
Are you running the LG Flash Tool mod or the official LG Mobile Support Tool? Are you using Download Mode set to Emergency?
On Read Phone Information, you don't need to run it (sometimes it hangs), and click on Clear phone Software update Registry on Select Country % Language Window.
Also check if the KDZ you downloaded is not corrupted. It's a common error the flash tool fail because the kdz is corrupted.

F. Gacrux said:
This is not possible. If you flashed D405n bootstack, there is no way LG Flash Tool recognize your phone as D410.
Are you running the LG Flash Tool mod or the official LG Mobile Support Tool? Are you using Download Mode set to Emergency?
On Read Phone Information, you don't need to run it (sometimes it hangs), and click on Clear phone Software update Registry on Select Country % Language Window.
Also check if the KDZ you downloaded is not corrupted. It's a common error the flash tool fail because the kdz is corrupted.
Click to expand...
Click to collapse
unfortunately so I assure you , I used the flash tool set to emergency and it always fails with the KDZ 405 , invecie loading the KDZ 410 installs easily

sebasrul21 said:
unfortunately so I assure you , I used the flash tool set to emergency and it always fails with the KDZ 405 , invecie loading the KDZ 410 installs easily
Click to expand...
Click to collapse
I followed step by step your guide, a KDZ files are not corrupt , I have tried several of the 405 does not work and no one , instead the KDZ 410 works .
The IMEI is zero

no recovery, no download mode, no micro usb, but root?

hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks

mca1 said:
hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks
Click to expand...
Click to collapse
How did you install that Hong Kong lollipop?

mca1 said:
hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks
Click to expand...
Click to collapse
Hi there.If you have root access and unlocked bootloader,you can install TWRP even without pc connection.
first you should download a terminal emulator app from google play.
then you should download the latest version of TWRP image file from here https://dl.twrp.me/yuga/.
Place it in the root of your /sdcard folder and rename it to twrp.img
Run the following commands in terminal app
Code:
su
and then we write recovery image file to FOTA with dd command.
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
and it's done.
press thanks if it was helpful.

i installed hk lollipop zip from my custom twrp recovery. and when rom istall has finished ; recovery gone.

mrp1375 said:
Hi there.If you have root access and unlocked bootloader,you can install TWRP even without pc connection.
first you should download a terminal emulator app from google play.
then you should download the latest version of TWRP image file from here https://dl.twrp.me/yuga/.
Place it in the root of your /sdcard folder and rename it to twrp.img
Run the following commands in terminal app
Code:
su
and then we write recovery image file to FOTA with dd command.
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
and it's done.
press thanks if it was helpful.
Click to expand...
Click to collapse
thank you mrp1375 but i tried this method and when i want to go recovery phone only restarts. because phone has no stock recovery.

mca1 said:
thank you mrp1375 but i tried this method and when i want to go recovery phone only restarts. because phone has no stock recovery.
Click to expand...
Click to collapse
Below are 2 solutions to get a properly working recovery
Preperation:
1. Download Dual recovery installer: XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip
2. Install NDRUtils
Next up we will test if the TWRP you installed works or not
-open NDRUtils and choose to boot into TWRP recovery.
Now unhide the result that you got to continue with the installation:
OK: I am now in TWRP
flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and reboot.
Everything will work normally now.
Not OK: I am not in TWRP
Reboot the phone if you have to (hold power until you feel 3 vibrations and then turn the phone back on)
You need to download this: http://nut.xperia-files.com/path/XZDualRecovery/Kernel_Builder
To get the right file make sure to selec the xperia z c6603 and select the rom version you are using, you can view what you have in settings, about phone, build number.
it will be much easier for you if you install this: X-plore File Manager The reason i recommend this application is that it automatically makes sure the file rights are correct.
Go into the settings and enable superuser +mount root mode
Now you can browse to the folder where you downloaded the zip in the left pane.
go into the zip and and then into tmp
Select the boot.img
now move to the right pane and browse to the root of your SD card like the comment above
go back to the left pane and with boot.img still checked click copy.
Now follow the original instructions mrp1375 gave you, but notice the different filename
Open terminal
Type : su
Type: dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Now you can reboot and if it worked the phone will vibrate twice and show a green led meaning you can press the down button to enter TWRP recovery.
Go into the recovery and now flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip so you get a proper installation
Now remember this very important fact:
Whenever you flash or wipe anything you MUST reinstall recovery and root again.
This is a failsafe strategy you can NEVER ignore becaus of your usb issues.
Keep SuperSu installer and XZ-lockeddualrecovery installer on your device at all times!

thank you

mca1 said:
thank you
Click to expand...
Click to collapse
Does that mean it worked?

tetsuo55 said:
Does that mean it worked?
Click to expand...
Click to collapse
Yes it worked, thank you much. :good:

tetsuo55 said:
Below are 2 solutions to get a properly working recovery
Next up we will test if the TWRP you installed works or not
-open NDRUtils and choose to boot into TWRP recovery.
Now unhide the result that you got to continue with the installation:
OK: I am now in TWRP
flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and reboot.
Everything will work normally now.
Not OK: I am not in TWRP
Reboot the phone if you have to (hold power until you feel 3 vibrations and then turn the phone back on)
You need to download this:
To get the right file make sure to selec the xperia z c6603 and select the rom version you are using, you can view what you have in settings, about phone, build number.
it will be much easier for you if you install this: The reason i recommend this application is that it automatically makes sure the file rights are correct.
Go into the settings and enable superuser +mount root mode
Now you can browse to the folder where you downloaded the zip in the left pane.
go into the zip and and then into tmp
Select the boot.img
now move to the right pane and browse to the root of your SD card like the comment above
go back to the left pane and with boot.img still checked click copy.
Now follow the original instructions mrp1375 gave you, but notice the different filename
Open terminal
Type : su
Type: dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Now you can reboot and if it worked the phone will vibrate twice and show a green led meaning you can press the down button to enter TWRP recovery.
Go into the recovery and now flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip so you get a proper installation
Now remember this very important fact:
Whenever you flash or wipe anything you MUST reinstall recovery and root again.
This is a failsafe strategy you can NEVER ignore becaus of your usb issues.
Keep SuperSu installer and XZ-lockeddualrecovery installer on your device at all times!
Click to expand...
Click to collapse
Hey! I have the same problem as the OP here. I followed the instructions like 5 times and still couldnt get it to work. The terminal is saying that "No space left on device" when i type "dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel"
any way to fix this? Thanks!

comcastic08 said:
Hey! I have the same problem as the OP here. I followed the instructions like 5 times and still couldnt get it to work. The terminal is saying that "No space left on device" when i type "dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel"
any way to fix this? Thanks!
Click to expand...
Click to collapse
That error sounds like either you dont have root or you have a typo, can you make a screenshot?

tetsuo55 said:
That error sounds like either you dont have root or you have a typo, can you make a screenshot?
Click to expand...
Click to collapse
snag. gy/gi8Ji. jpg
sorry i cant post links yet

comcastic08 said:
snag. gy/gi8Ji. jpg
sorry i cant post links yet
Click to expand...
Click to collapse
That doesnt look quite right it should look like this:
Code:
[email protected]:/ $
Then you type "su" (without the quotes) and press enter
The display then changes to:
Code:
[email protected]:/ #
Now you type "dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel" (without the quotes) and press enter
And then it should work properly.

tetsuo55 said:
That doesnt look quite right it should look like this:
Code:
[email protected]:/ $
Then you type "su" (without the quotes) and press enter
The display then changes to:
Code:
[email protected]:/ #
Now you type "dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel" (without the quotes) and press enter
And then it should work properly.
Click to expand...
Click to collapse
i typed su before that code and the same error occured sadly
why did my usb port had to break ugh

comcastic08 said:
i typed su before that code and the same error occured sadly
why did my usb port had to break ugh
Click to expand...
Click to collapse
Can I have another screenshot of that?

tetsuo55 said:
Can I have another screenshot of that?
Click to expand...
Click to collapse
snag .gy/AekHa. jpg

comcastic08 said:
snag .gy/AekHa. jpg
Click to expand...
Click to collapse
In that screenshot i see again the same mistake i mentioned before
please do this
Just type only su and enter
and then send me the screenshot of that.

tetsuo55 said:
In that screenshot i see again the same mistake i mentioned before
please do this
Just type only su and enter
and then send me the screenshot of that.
Click to expand...
Click to collapse
snag. gy/aWyCY .jpg

comcastic08 said:
snag. gy/aWyCY .jpg
Click to expand...
Click to collapse
All i can think of is that you have the wrong boot.img

tetsuo55 said:
All i can think of is that you have the wrong boot.img
Click to expand...
Click to collapse
i downloaded the one you said XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and renamed it to boot.img
even the twrp.img doesnt work ugh

Guide Root and Unbrick Moto E3 Power (XT1706), For newbie

Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.

First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .

pranaay saini said:
First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .
Click to expand...
Click to collapse
i dont know what u mean "lucky is not on my side" :-?

bopvnn said:
i dont know what u mean "lucky is not on my side" :-?
Click to expand...
Click to collapse
Meaning you have bad luck .

Hey, I see some guys on Youtube that said losing their IMEI after flashing stock rom using SP Flash Tool. How to restore it? The last time I use a Mediatek Device it was an Android One.

Removing battery wont help ,
bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
https://www.youtube.com/watch?v=W-bBhe3kp_8&t=327s

Will root will run on xt1700?
As in the title - Will the TWRP work with the XT1700?

Alcatraz_91 said:
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
&t=327s
Click to expand...
Click to collapse
Bro my phone is vibrating and showing Moto logo and again vibrating and showing Moto logo...so I'm thinking that my phone is soft bricked after flashing twrp 3.1.1
When I try to flash stock using sp flash tool some error is showing 0*00... Will u plzzz help to get back my device..:crying::crying:

My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....

Manoj Kumar 9779 said:
My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....
Click to expand...
Click to collapse
Please do not private message me asking for help/assistance with your problems.
I will help anyone if asked correctly, in the correct way and in the correct place.
I will not answer to demanding messages or messages giving no information what so ever.
I'm a typical user, not a helpdesk.
You question is answered in this thread and the Q and A section.

Not able to roote3 power with build s144
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great

It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock

Jackyhost said:
It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
jigar191089 said:
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:

Note :-
It works only on S135 and S141
It does not work with S143 and S144
I don't know why

hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie

kunal0303 said:
hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie
Click to expand...
Click to collapse
use this adb... i too had the same issue......... it worked for me.....
https://forum.xda-developers.com/showthread.php?t=2588979

HELP!!!
i cant execute "fastboot reset userdata" it shows "cant find file specified" please help someone

bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
Awesome post brother! I only wish I had simply read this post before messing up so much with my phone. Actually, I was messing with some magisk module (edxposed) whick bricked my device and got me stuck at a bootloop and with no recovery partition at all. (It erased my TWRP). So I used the sp flash tool and formatted the whole flash (at that time, I hadn't read this post of yours). Then I flashed my entire firmware back via the sp flash tool. So I thought that now my problem was fixed. But when I switched on my phone I saw my phone's IMEI Number gone! And the sim not working and showing invalid IMEI message. So I tried to find a fix on the internet and I found 2 solutions. First was using an app which requires the phone to support some mtk engineering mode. I followed the instructions and realised that maybe our phone Moto E3 Power doesn't support this mode. So I switched to the second solution, which required root access. So then I set off for rooting my newly unbricked phone. But I again did some mistakes:
1.) Allowed usb debugging and OEM unlocking in my phone's developer options in settings.
2.) I installed minimal ADB v1.4.3 on a windows 10 computer. Checked my phone's connection with the PC via ADB command adb devices. It worked showing some error initially (daemon not started.... Starting daemon...) and then showing some hex code signifying my device's successful connection with the PC.
3.) Used ADB command adb reboot bootloader to boot into fastboot mode. It worked too.
3.) Used fastboot command fastboot devices to check if my device is still being recognised as connected to the pc. Here came an error (the command didn't return any hex code like the adb command adb devices did. So I googled a solution which involves updating the "Android ADB interface" to "Android Bootloader interface" in the "Android device" submenu of the "Device Manager" window of the "control panel" of the pc, by updating its drivers using the "latest windows usb drivers" 8mb file which could be found very easily on the internet (searching solution for fastboot device drivers update on Google). {*Note: If you hadn't installed beforehand, any adb and fastboot drivers at all, then you will see "Other devices" submenu instead of the "Android device" submenu in the device manager window.
Also, you compulsively need to be in fastboot mode with your device attached to pc, in order to see this "other devices" submenu.} So now the fastboot devices command started working by showing the hex code like adb devices command did.
4.) Used fastboot oem unlock command to unlock the phone's bootloader. Pressed the volume up button of my phone as instructed by the warning message on my phone's screen. Unlock flow started in the minimal adb window in my pc. Finished successfully within 9-13 seconds. Another mistake now, after unlocking the bootloader, I forgot to format userdata.. Actually I didn't know about the fastboot format userdata command. I thought the fastboot -w reboot is the only way to format userdata (which wasn't working for me). Unaware of the fact that now I was going to experience a bootloop during rebooting my phone, I continued with the further steps.
5.) Used fastboot flash recovery recovery.img command to flash the unofficial twrp img which I had already placed in the minimal adb folder and renamed to recovery.img I used unofficial twrp v3.1.1 (by moderator) [which was working perfectly earlier on my phone] {link at bottom}. Successfully finished this step too. [You can use either of the two twrp: Dr. Faramroze (link provided by op) or moderator (link provided by me). Both are working fine]
6.) Used the fastboot reboot command (although it never works for me). It shows finished in the minimal adb cmd screen but the phone doesn't reboot. So I manually unplugged the device. Removed and reinserted the battery.
7.) Now rebooted to recovery screen and found the unofficial twrp successfully installed. [ Warning: After the 6th step, don't reboot your phone normally. Instead, boot into the fastboot window [hold power + vol. up] and select the boot into recovery option. This is required only for the first boot up process or else if you do a normal boot during the first boot, the stock recovery replaces our recently flashed custom recovery..
8.) Upon entering the twrp recovery during the first boot, I installed the magisk v19.3 zip I had in my external SD card. It's not necessary to root your phone right now, you may even do it later by simply rebooting from within the twrp, and later on entering recovery after your phone is all set and working and when you're free from other hassles. But I went for rooting during the first boot. And encountered an error something like: "Cannot mount data(0mb)" at the second last line. So, I could not root my phone. So I decided to root it later on and currently just have it switched on. So, I went for the reboot option in twrp.
9.) My phone started rebooting and got stuck at the boot screen with the tag Device unlocked at the lower left corner (indicating unlocked bootloader). But this was something familiar to me, I had already dealt with this error the previous time I rooted my phone. The solution was very simple. I just had to flash a no verity-otp-encrypt.zip file {included along with the twrp link} using the twrp recovery and then my device would boot properly, as it did the last time.
10.) I flashed the no verity-otp-encrypt.zip file from the twrp and got so many red line errors during the flash. (This didn't happen the last time). Every error had the same words, "cannot mount data (0mb)". So I went back to try rebooting again.
11.) Started rebooting again. This time the device didn't get stuck at boot screen, rather it went into a bootloop, rebooting again and again. Now maybe the no verity-otp-encrypt.zip file did its job and my device got free from the stuck at boot screen problem but simultaneously got caught by the bootloop error probably created due to not formatting the userdata after unlocking the bootloader. Or maybe the "cannot mount data (0mb) just ruined up my phone. Whatever the cause be, I just went for reflashing the entire firmware via the sp flash tool and temporarily forgetting all the bootloader unlocking, custom recovery, rooting, etc and live with an invalid IMEI phone without a working sim, until I find a solution on the internet.
12.) And then, I ended up here on this thread leaving my experience, and learning my mistakes from the OP's post. Very soon I will depart for the cyber cafe to try again without any mistakes this time.
At last thanks for this awesome thread.
And yes here's the link for the unofficial twrp 3.1.1 (by moderator) & the no verity-otp-encrypt.zip file:
https://drive.google.com/folderview?id=1-CHJtDUyPH1CJHebhKsUJz8SzKJAcDbv
---------- Post added at 12:56 PM ---------- Previous post was at 12:41 PM ----------
smug_loner said:
From where i can download fastboot file??
Click to expand...
Click to collapse
Search Google for "Moto E3 power firmware flash file" and you will come across websites providing the flash file. The file would have a name like "Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip". The "S135" over here is the firmware version and will vary upon the version uploaded by the site. The latest version as of today is S152_190315. I somehow managed to download a S151 file and I forgot where I downloaded it from. But you can still go for older firmware versions, and then when you're done with all the flashing and rooting and all that and your phone starts up without any error, you can go for OTA updates from within the settings>about phone>system update.

bopvnn said:
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
Click to expand...
Click to collapse
S151 is newest (flash file available for download) for XT1706. [Actually S152 is latest but it's not yet available for download] So you succeeded maybe because you used the older version. Cause a guy commented that he couldn't root the newer versions but could root the older versions.
---------- Post added at 02:32 PM ---------- Previous post was at 02:25 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
Click to expand...
Click to collapse
Is it necessary to uncheck preload? If yes, I think you should highlight it. Anyway, I didn't uncheck preload and the flash successfully worked for me? So what difference does it count for? Please do notify us of its significance.
---------- Post added at 03:03 PM ---------- Previous post was at 02:32 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
Click to expand...
Click to collapse
I didn't remove my battery, sim or microsd card and everything worked fine for me. Also, I didn't connect my device to pc after pressing the download button in the sp flash tool. Here's what I did instead:
I kept the sp flash tool ready with all steps. Only pressing the download button remaining. Then I connected my device to the pc. As soon as you hear the device connected sound, press the download button. And the flashing process will start. If you get late in pressing the download button, you will hear another sound of device disconnected. Then you'll have to remove the usb from the device and replug it and go for trying again pressing the download button as soon as you hear the device connected sound.

Database Develop

welcome