This was a test build
CyanogenMod is a free, community built distribution of Android 4.4.3 (KitKat) which greatly extends the capabilities of your Tablet.
Code:
include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This build, builds on the CM-11.0 build of FreeXperia.
What is different:
New kernel from Sony Open source release 4.3
Kernel Rebased from CAF source kk2.7_1.38 (KitKat)
New vendor libraries from 4.4.2
Sensors(GPS/ACCEL/COMPASS) have been replaced by Stock vendor files, not build from source.
WiFi kernel drivers from CM - KERNEL
Display-CAF replaced by CAF implementation
Various tiny changes from GITHUB
IR Remote from sssemil here
Source: My Github
Bugs: That is why I created this, You tell me.
I have none critical as far as I know.
Thanks:
CyanogenMod, FreeXperia, Kali-, cdesai, AdFad666, and any other dev that I misssed.
Installation:
Backup your existing ROM/APPS Important!
Full Wipe is Required when coming from another ROM/Firmware version, so YEAH you need to wipe for first install.
Install via CWM
Install gapps
Reboot
This is WIP.
Work completed
Pollux is working 100%, WiFi(pollux_windy) version have GPS issue.
Download:
REMOVED
Please post Logs if you experience an issue:
I need Logcat & Kernel
Code:
For Logcat:
adb logcat >> logcat.log
For Kernel:
adb root
adb shell dmesg >> dmesg.log
Please upload to http://pastebin.com/ and share links here with error description and how to reproduce.
Anybody have some feedback for me?
Really would like to have some.
I'd give you feedback but i have the pollux_windy variant
pangiotis24 said:
I'd give you feedback but i have the pollux_windy variant
Click to expand...
Click to collapse
Thanks,
I will have to do a windy build, first I will have to get hold of the vendor libs etc, it will take some time. Let me see if I can but no promises. :good:
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
isimobile said:
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
Click to expand...
Click to collapse
Well, I've used fastboot , flashtool & Sony Emma to do various things...If it's not too complicated, I'm willing to try out your 311 build :fingers-crossed:
Will you post instructions here or PM me ?
GretaLewd said:
Well, I've used fastboot , flashtool & Sony Emma to do various things...If it's not too complicated, I'm willing to try out your 311 build :fingers-crossed:
Will you post instructions here or PM me ?
Click to expand...
Click to collapse
PM send.
Downloading now..will give you the feedback soon
Edit : so far everything works good.. will update you if any PBM found
Sent from my Xperia Tablet Z LTE using Tapatalk
311 build test
Sadly, GPS not working (same as with latest "official" CM11 nightlies).
GretaLewd said:
Sadly, GPS not working (same as with latest "official" CM11 nightlies).
Click to expand...
Click to collapse
try 0530 cm nightly.Gps works ok there
pangiotis24 said:
try 0530 cm nightly.Gps works ok there
Click to expand...
Click to collapse
Thanks for the info :good:
I'm actually testing the OP's 311 unofficial CM11 build, which seems to be working fine apart from GPS.
GretaLewd said:
Thanks for the info :good:
I'm actually testing the OP's 311 unofficial CM11 build, which seems to be working fine apart from GPS.
Click to expand...
Click to collapse
Please send me some logs, then I can investigate.
I do not own a windy I have the 3g/lte version, trying to see if I can help and resolve the GPS issue.
I added link to WiFi version.
Not working: GPS.
I need a logs to trace the error. Please post your logs for WiFi version. See second post of how to do that.
Note: I do not own a Windy just the 3g version, I would like and try an assist in finding the GPS issue but cannot without a tester willing to work with me in finding a solution. I hope I will be able to help.
isimobile said:
I added link to WiFi version.
Not working: GPS.
I need a logs to trace the error. Please post your logs for WiFi version. See second post of how to do that.
Note: I do not own a Windy just the 3g version, I would like and try an assist in finding the GPS issue but cannot without a tester willing to work with me in finding a solution. I hope I will be able to help.
Click to expand...
Click to collapse
I'll try to get you something a bit later. Just got home after a 12 hour shift at work - tired out :silly:
Still using your 311 ROM build for now, no problems - I don't really miss GPS.
Great to see this rom!
Gesendet von meinem LG-D802 mit Tapatalk
I'm really thinking about flashing CM on my pollux.
I could live without GPS for some time. What are the main differences between this builds and official CM builds?
Another question, if I do a full backup of my actual system, stock 4.4.2 sony firmware. Can I simply restore the backup to use the stock ROM again or do I have to do a normal flashing procedure?
romskii said:
I'm really thinking about flashing CM on my pollux.
I could live without GPS for some time. What are the main differences between this builds and official CM builds?
Another question, if I do a full backup of my actual system, stock 4.4.2 sony firmware. Can I simply restore the backup to use the stock ROM again or do I have to do a normal flashing procedure?
Click to expand...
Click to collapse
If you do a backup it you can restore and it should work.
On Pollux (3g/lte) the GPS is working, it is not working on pollux_windy (wifi)
The difference from normal cm is that I have used the new vendor libs from 4.4.2, the official one is still using the vendor libs from 4.2.2. My aim is to submit this changes to cm, but before I do that I would like make sure everything is working, that is why I created this thread. I am also using a the kernel from 4.3 release and it was rebased to include the the changes upto 4.4.2.
isimobile said:
If you do a backup it you can restore and it should work.
On Pollux (3g/lte) the GPS is working, it is not working on pollux_windy (wifi)
The difference from normal cm is that I have used the new vendor libs from 4.4.2, the official one is still using the vendor libs from 4.2.2. My aim is to submit this changes to cm, but before I do that I would like make sure everything is working, that is why I created this thread. I am also using a the kernel from 4.3 release and it was rebased to include the the changes upto 4.4.2.
Click to expand...
Click to collapse
okay great! I should try your build. What GAPPS do you recommend otherwise I would use BankS GAPPS.
The latest firmware from sony seems a bit laggy compared to 4.3. Is CM 4.4.3 yet published?
this build isn't up to date? As I saw the FreeXperia build wasn't it and your rebased kernel is inside?
Related
CyanogenMod is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{V}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project, a ROM for the Sony Xperia V
Contributors
FXP, kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
FXP said:
HOWTO
Install instructions:
...
- fastboot flash boot boot.img (from cm10 zip)
...
Click to expand...
Click to collapse
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
cpumaster said:
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
Click to expand...
Click to collapse
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
alfanumerica said:
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Click to expand...
Click to collapse
Yes it's a typo, because i don't think that a cm10 kernel would work on cm11
When flashing the zip the kernel should be installed too, if you want though you can flash the kernel from the cm11 zip manually via fastboot.
paxy97 said:
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
Click to expand...
Click to collapse
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Camera doesn't work
Sent from my LT25i using Tapatalk
imk82 said:
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Click to expand...
Click to collapse
the answer is in the first post it's really difficult to read?
"Version Information
Status: Testing"
Testing means that is really unstable and not for daily use, testing status means that who want to help can try the rom and report bugs to developers.
cpumaster said:
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Click to expand...
Click to collapse
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
paxy97 said:
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
Click to expand...
Click to collapse
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
paxy97 said:
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
Click to expand...
Click to collapse
Actually championswimmer's version is much like AOSP. There is no AOKP options, so that's why there is no conflict.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
try this :
http://forum.xda-developers.com/showthread.php?t=2397942
All 4.4 GApps packages and addons are compatible with both ART and Dalvik runtimes
Guys don't use ART. Some apps don't work with it
Sent from my Nexus 4 using Tapatalk
working great with art runtime !
(i didnt install gapps yet)
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
androidseb said:
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
Click to expand...
Click to collapse
It's still very very close to AOSP atm, so check out any Nexus 5 pics of KitKat, there's nothing really additional to it yet.
Hi. I have original firmware android 4.1.2 with unlock bootloader and root permission. I understand what i do to flash this version. Where i can found recovery?....this version is stable? What don't work fine in cm11? Thanks
Inviato dal mio GT-N8000 con Tapatalk 2
CyanogenMod 10 is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
Hey Guys,
This port is based of CyanogenMod 10 By Sir blearreaz0n. I have used his rom for fixing bugs and learning purposes. I have also compiled different fixes from different sources and also included my own fixes. This First build is a port so the Next build , i will build from source.
Pre-requisites:
*ClockworkMod Recovery https://docs.google.com/file/d/0B9B_MYcrSzXON1AxR3hDZmVacUE/edit
Installation (first time/new users):
*Flash and install the CWM recovery via ODIN
*Reboot into Recovery using 3-button-combo
*Do a Nandroid backup!
*Do a wipe data/factory reset
*Do a format /system partition
*Install the ROM from sdcard
*Reboot
Working:
*2D acceleration
*Lights
*Sensors
*Telephony - calling, messaging, mobiledata
*Touchscreen (multitouch)
*Bootanimation
*Themes
Not working:
*Audio
*Bluetooth
*Bluetooth tethering
*Camera
*USB Mass Storage
*USB tethering
*Wi-Fi Hotspot
*Camcorder
*OMX encoders/decoders
*EGL
*GPS
*Wi-Fi (partially)
Issues:
*Incorrect colors is caused by the (buggy EGL since the other BCM21654 devices have an official JellyBean update, implementing EGL from Ice Cream Sandwich is not working). I am working on it but for the time , use the theme attached in the attachments Thanks to HAKA Theme http://forum.xda-developers.com/showthread.php?t=1951801
*The RIL is working thanks to Team Hurricane but since the audio is not working you can only use the messaging option http://team-hurricane.blogspot.com.br/2014/05/informacoes-cyanvision-cyanogenmod-101.html
*For performance i advice you to turn off all the animation and to enable 16 bit transparency
*Themes work but there are Incorrect colors (See first Issue)
GitHub:
https://github.com/XadoA/android_device_samsung_coriplus/tree/cm-10.1
https://github.com/XadoA/android_kernel_samsung_coriplus
Downloads:
http://www.mediafire.com/download/46nra4oagtkgeom/
If anyone can help me fix the bugs , please inform me and kindly if you encounter any bugs , provide a logcat or a screenshot
UPDATE : Device Tree UPDATED Thanks to ohmpsy
Discussion Thread : http://forum.xda-developers.com/showthread.php?t=2690504
Current work being done:
Building a new kernel to overcome Wi-Fi, Bluetooth, GPS and other bug and to improve stability (WIP)
Kernel Thread : http://forum.xda-developers.com/android/development/custom-kernel-xado-kernel-samsung-t2862795
Thanks to:
Omarkoopa
ohmpsy
MetalStriker
blearreaz0n
Team Hurricane
Alonso1398 (For kernel fork)
dhinesh77
Okay I have a test build here it is mixed with sources of galaxy music and galaxy pocket plus it boots up and most of the bugs are fixed like EGL , Wifi etc. But the main thing that doesn't work is TOUCH its broken (its kernel related) so not so much can be done but logcat can be taken for now i will try to fix it soon http://www.mediafire.com/download/3b9d2nu2ozi1fa1/Build.zip
Hey Guys, it has been a long time now and i haven't updated the rom that doesn't mean that the development has discontinued i was busy with a lot of personal stuff so wasn't able to update and apart from this i have also started to port cm11 side by side to cm10 well i did this order to learn more about our device ill soon upload the cm roms with new recovery, thanks for your understanding
hope to see it working
hope to see it working, i really need anything better than stock
Xado said:
Hey Guys, it has been a long time now and i haven't updated the rom that doesn't mean that the development has discontinued i was busy with a lot of personal stuff so wasn't able to update and apart from this i have also started to port cm11 side by side to cm10 well i did this order to learn more about our device ill soon upload the cm roms with new recovery, thanks for your understanding
Click to expand...
Click to collapse
Are you still working on this rom?
android1111 said:
Are you still working on this rom?
Click to expand...
Click to collapse
yes but progress is not that much like there are some bugs which I cant fix properly
Xado said:
yes but progress is not that much like there are some bugs which I cant fix properly
Click to expand...
Click to collapse
Ok. Thanks;
Have you fixed touch?
android1111 said:
Ok. Thanks;
Have you fixed touch?
Click to expand...
Click to collapse
no its the hard part when I apply patches the rom doesn't boot still trying though
Xado said:
no its the hard part when I apply patches the rom doesn't boot still trying though
Click to expand...
Click to collapse
OK. An other question: in what dense the WiFi is working "partially"? It only shows ssid or it connect with only some types if wifi (WPA, WPA 2, ecc.)?
android1111 said:
OK. An other question: in what dense the WiFi is working "partially"? It only shows ssid or it connect with only some types if wifi (WPA, WPA 2, ecc.)?
Click to expand...
Click to collapse
I haven't tried the wifi my self but through logcat I came to know that the driver is working that is in the test build the one with fixed colors
Xado said:
I haven't tried the wifi my self but through logcat I came to know that the driver is working that is in the test build the one with fixed colors
Click to expand...
Click to collapse
Good! so after fixing touch the rom will probaly be usable
I can try to ask team hurricane, some time ago they created a cyanogenmod rom for galaxy pocket that was having working touch.
EDIT: For now I found pocket neo/duos kernel and device tree souces. I don't know if they can help because i never developed a rom but here are:
https://github.com/dhinesh77/android_kernel_samsung_corsica
https://github.com/dhinesh77/android_device_samsung_corsica
I'm now tryng to extract sources from stock rom
android1111 said:
Good! so after fixing touch the rom will probaly be usable
I can try to ask team hurricane, some time ago they created a cyanogenmod rom for galaxy pocket that was having working touch.
EDIT: For now I found pocket neo/duos kernel and device tree souces. I don't know if they can help because i never developed a rom but here are:
https://github.com/dhinesh77/android_kernel_samsung_corsica
https://github.com/dhinesh77/android_device_samsung_corsica
I'm now tryng to extract sources from stock rom
Click to expand...
Click to collapse
yes I am actually using some blobs from that tree I would prefer the galaxy music tree though as it has almost same kernel and drivers
Xado said:
yes I am actually using some blobs from that tree I would prefer the galaxy music tree though as it has almost same kernel and drivers
Click to expand...
Click to collapse
You mean those sources:
https://github.com/Alonso1398/android_device_samsung_ivoryss
https://github.com/Alonso1398/muZic_kernel_ivoryss
?
Also, is in the logcat any kernel/touch error?
EDIT: I'm not an expert so i don't know if it helps but here I've found a fastboot tool that say to fix bootloops
EDIT 2nd: Here an other
android1111 said:
You mean those sources:
https://github.com/Alonso1398/android_device_samsung_ivoryss
https://github.com/Alonso1398/muZic_kernel_ivoryss
?
Also, is in the logcat any kernel/touch error?
EDIT: I'm not an expert so i don't know if it helps but here I've found a fastboot tool that say to fix bootloops
EDIT 2nd: Here an other
Click to expand...
Click to collapse
yes that is the one and thanks ill look into the touchscreen issue and try this method
Xado said:
yes that is the one and thanks ill look into the touchscreen issue and try this method
Click to expand...
Click to collapse
Have you tried the fix? Did it work?
android1111 said:
Have you tried the fix? Did it work?
Click to expand...
Click to collapse
did not try it yet but I get a feeling it wont work but its worth a try
Xado said:
did not try it yet but I get a feeling it wont work but its worth a try
Click to expand...
Click to collapse
Any notice?
android1111 said:
Any notice?
Click to expand...
Click to collapse
tried it same problem I think the problem might be in the device tree I will take a look into it
Xado said:
tried it same problem I think the problem might be in the device tree I will take a look into it
Click to expand...
Click to collapse
News?
android1111 said:
News?
Click to expand...
Click to collapse
well I built a new kernel thanks to Alonso but couldn't test it out as my pc crashed luckly the hard disk is okay so I might be able to try it out
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads:
CM server
Installation:
Unlock the bootloader
Flash a recovery
Reboot into recovery
Flash rom.
Reporting bugs:
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Report bugs on Jira at jira.cyanogenmod.org
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your:
Phone model:
CM Download url:
Gapps version:
Radio (baseband):
CM version:
Did you:
Install xposed framework?
Restore apps in titanium backup?
Flash another kernel?
Are you using a supported recovery?
start Art Runtime?
search the thread for similar issues before posting?
I don't reply to tech support by pm or emails/hangouts messages.
If you have xposed installed, please bother to post.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Offiical cm for peregrine, ROM for the Moto G
Contributors
Somcom3X, @BlueFlame4
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader with recovery
Version Information
Status: Beta
Created 2014-11-24
Last Updated 2015-04-20
Reserved
I present to you CyanogenMod 12 for the peregrine. After delaying my initial release to an almost fully working state, it is here now.
Video review:
Big thanks to @Cm9aphla
Bugs:
Wifi tether (Experimenting)
Bluetooth stack issues with multitasking. Somewhat buggy
GPS issues as well.
Reserved
Big thank you to all of the donators:
Please confirm your username by posting the remainder of the transaction ID. To donate, please send to [email protected] via paypal
Donators
Code:
S. Fabbro 4HR94540AN4xxxxxx
D. Noonburg 604068013C4xxxxxx
G. Girotto 9SH91349CF4xxxxxx
Gracias!
New recovery is in the works, stay tuned.
If anyone needs some assistance, join #cyanogenmod or #carbonrom on irc.
I'll be in #carbonrom-dev most of the time.
If no one responds instantly, simply wait. Don't be this guy (You know who you are):
Code:
[22:57:18] --> carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has joined #teamcarbon
[22:58:19] <carbon_guest> I'm having an issue, this is my first time trying the carbon ROM the installation
was succesful but every time i try to install the GAPPS it gives me an error and says (Satus 6), any aid please?
[23:01:02] <carbon_guest> anybody here?
[23:10:06] <carbon_guest> hellooooooooooooooooooooooooooooooooooooooooo
[23:26:12] <-- carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has quit (Quit: Page closed)
Great work! I'll stay here until official 5.0 ota arrives. [emoji16]
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Awesomeness, grabbing it now and will run it through the paces.
@Somcom3X
great work man =D
Bugs that I saw:
Wifi Tether (mentioned on op)
CPU Clock on 1190 almost all the time when the screen is on
@Somcom3X Excellent release! Though I've encountered a few issues apart from the mentioned ones.
AOSP keyboard gesture swiping does not work
Power Off does not work
Notification sound does not work. Tried changing it a few times but none of which works. It vibrates though.
Notification LED doesn't work? I don't think it's working or how it's intended to work in 5.0 Lollipop, but Pulse Notification light is turned on (This seems to work for alarms though)
Random Settings force closes
Maps is not working -- I know it's totally unrelated but it could be GPS related as it just kept showing "Waiting for location..."
Some apps are left even after clearing all apps. ie: SuperSU requests, Contacts, app installs.
Volume rocker for Media Volume gets stuck at a certain point, though it's only a visual bug.
Crossed out stuff just suddenly worked. lol
Is it possible to get Busybox working on CM12 too? Can't find one that would install.
Using this as a daily driver until I find something that wouldn't let me.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Click to expand...
Click to collapse
I used this and it seems to be working fine. http://download.chainfire.eu/589/SuperSU/
I'm testing since you release the zip in the other thread (I was even about to suggest a new thread ).
I did a dirty flash from cm11, so, maybe some of my reports here are specific about doing dirty flash (just in case, remember to redo your lockscreen security, because the dirty flash made your lockscreen accept anything as password. Remaking the lockscreen security fix it).
* Stock camera doesn't work (shows image, but doesn't take photos, even after cleanup the application). Downloading the google camera or whatever other camera works (and it seems the camera bug from cm11 is gone).
* f2fs doesn't work, ext4 works but useless (you can't do anything, but the cm12 reads that there's a partition and with size, etc), exfat doesn't work either. The worse is: using any of the filesystems I said made you unable to even reformat de sdcard. Only fat works for me. Btw, I'm unable to copy from pc to sdcard.
Thanks
Downloading now. Thanks for posting, been waiting for a lollipop rom.
Edit:
Gps is working fine for me, camera works when it wants to, replaced the stock camera with a port from the apps section of this forum.. Google camera seems a bit more stable. Installed no frills cpu control and disabled safety valve and other apps being able to set frequency and I noticed while it still says min is 1.1 if you look at stats it will go to 300 like normal.
Guest Mode is enabled ?
settings crash sometimes, but it's working well
thanks for your great work
Hi. I'm so excited to install this, but I want to know if I'll be able to go back to KK if there is any problem
Thanks for all your hard work!
Great work man
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
athlantar said:
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
Click to expand...
Click to collapse
This is CM12 5.0
Probably just a typo by SomCom3X.
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Getting a GPS lock before you flash cm12 worked for me. That should be step one from now on before flashing any ROM. Just in case ya know. So far everything's running great.
Level99 said:
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Click to expand...
Click to collapse
I've read it's an issue with quite a bit of Motorola devices. The stock GPS trick is the best thing possible to do at the moment.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
Click to expand...
Click to collapse
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
gr3ud said:
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
Click to expand...
Click to collapse
Okay, when already posting links, there is latest beta v 2.27
CyanogenMod is a free, community built distribution of Android 5.1 which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
[DEVELOPMENT] - CM12.1 - Android 5.1 - FreeXperia Project, ROM for the Sony Xperia Z3 Tablet Compact
Contributors
jerpelea
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2014-12-02
Last Updated 2015-04-13
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
Homepage
www.freexperiaproject.net
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Nice to read that there are Developers for this device.
just a few questions... i've read that sony opens kernels, blobs etc for the recent phones - i never found those for the z3tc ? did i miss that? or could the sources of the different devices could be use to achive the cm12 port?
and the other important question... are there any bugs in this build? what works? what does not work?
is there a twrp build for the z3tc?
regards
we have enabled daily builds
if your device is not yet in the list will appear soon (1 day,1 week, 1 month) no ETA please
but you have to remember that is an early alpha build
Doesnt seem an answer for any questions I made.... didnt ask for an ETA either...
well... fine
Thank you for your efforts. Just bought the 32GB wifi tablet and not sure if I want start experiments with custom ROMs etc right out of the box, but would you kindly specify what does work and what doesn't in your build?
Cheers
finran said:
Doesnt seem an answer for any questions I made.... didnt ask for an ETA either...
well... fine
Click to expand...
Click to collapse
I think that account is automated, for now at least.
This thread and the OP's posts are exactly the same as in the Xperia Z1 forum.
Hopefully once a first build is up and running, we will see some more attention from OP for questions.
finran said:
Nice to read that there are Developers for this device.
just a few questions... i've read that sony opens kernels, blobs etc for the recent phones - i never found those for the z3tc ? did i miss that? or could the sources of the different devices could be use to achive the cm12 port?
and the other important question... are there any bugs in this build? what works? what does not work?
is there a twrp build for the z3tc?
regards
Click to expand...
Click to collapse
Source usually taken from similar hardware blob from other devices or kitkat.
Sent from my C6833_GPe using Tapatalk
we have 1 kernel for all the Zx family (not the original Z) and repo are up for every device in that families
we are working on a huge device list and thing have improved alot in last days, we have currently some hw failure which prevent us to work on a release
just take patience
keep up the good work guys! thanks a lot for your effort！
did someone already try the rom ?
I can't actually find the rom.
moritz31 said:
did someone already try the rom ?
Click to expand...
Click to collapse
xan_asmodi said:
I can't actually find the rom.
Click to expand...
Click to collapse
I thought there was ROM in OP first, but then I realised that was just some kind of announcement.
And so we wait
ky3bmu4 said:
I thought there was ROM in OP first, but then I realised that was just some kind of announcement.
And so we wait
Click to expand...
Click to collapse
Yeah, I had a look on their website but with the build server failure I'm not sure when we'll see a build, automated or not. I've asked Krabappel if he's got anywhere with his CM12 build but I think we'll face the same problems as the other members of the Z3 family; namely that until Sony release something official there will be blobs we're missing.
Merry Christmas!
Sorry, but what is the Z3 Tablet Compact codename: Pegasus or Scorpion? In two different places on FXP site those two names are mentioned.
da900 said:
Sorry, but what is the Z3 Tablet Compact codename: Pegasus or Scorpion? In two different places on FXP site those two names are mentioned.
Click to expand...
Click to collapse
Scorpion Windy for the Wifi version
Scorpion for the LTE version
This is according to the kernel sources by Sony which they have published on Github.
ejdan said:
Scorpion Windy for the Wifi version
Scorpion for the LTE version
This is according to the kernel sources by Sony which they have published on Github.
Click to expand...
Click to collapse
Is it not available yet? I can't find scorpion anywhere.
Calamityx1 said:
Is it not available yet? I can't find scorpion anywhere.
Click to expand...
Click to collapse
There is no FXP build but the unofficial CM12 build by Qzerno is working great:
http://forum.xda-developers.com/z3-tablet-compact/general/daily-cm12-unofficial-builds-t2983400
CyanogenMod 12.1 is a free, community built distribution of Android 5.1 (LolliPop) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM12.1 for the Samsung Galaxy Tab 2 I705 VZW LTE version.
**IMPORTANT** I705VRBLL2 FW required,if you have taken the latest OTA, and were not already rooted/unlocked you will not be able to use this ROM.
There is not root/unlock solution for the latest OTA. See more info in the last few pages of the linked root /unlock threads below.
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions (These are all required)
ROOT and BOOTLOADER unlock required following the linked guides.
Flash THIS custom TWRP recovery with SELinux capabilities.
Download latest ALPHA from http://downloads.codefi.re/jrior001/cm/espressovzw.
Locate 5.1 Gapps via a quick Google search.
Wipe factory/data reset in recovery before installing CM12.1 (unless you are already on a CM12.1 build).
Reboot into recovery and install ROM and gapps.
Known Issues:
LTE radio - Acts up at times requiring a reboot. Causes wakelocks
GPS sometimes it works, sometimes it doesn't. Reboot usually fixes it.
CAMERA - 720p recording fails, all other resolutions work well
USB wakelocks after removing USB cable, "USB Connected" pop-up doesn't go away.
OTG/keyboard dock doesn't work at all
Overall device is smooth and stable minus the above listed issues. I will continue to work on these but wanted to get some feedback on this so far as well. I'm open to assistance if anybody else has one of these and some talent and wants to help.
Huge thanks:
@invisiblek and the rest of the Samsung MSM8960 device maintainers, without there work to follow this would have never happened..
These build utilize the existing samsung 8960 device trees and the 3.4 d2 caf kernel hosted at CM github as well as the following:
https://github.com/jrior001/android_device_samsung_espressovzw
XDA:DevDB Information
CM12.1 i705 TAB2 VZWLTE, ROM for the Samsung Galaxy Tab 2
Contributors
jrior001, jrior001
Source Code: https://github.com/jrior001/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: i705VRBLL2
Based On: AOSP
Version Information
Status: Stable
Created 2015-02-08
Last Updated 2015-09-05
Great...!!!...I see a bit lonely here....whatever..great work sir.
–NigthFury– said:
Great...!!!...I see a bit lonely here....whatever..great work sir.
Click to expand...
Click to collapse
It is lonely here but whatever, i'm still working on it in my spare time. Fixed camera in new build i just uploaded. Also BT is working, sort of....sometimes. Not sure whats going on with BT but i'll keep at it.
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
rippedwarrior69 said:
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
Click to expand...
Click to collapse
I'm not as experienced as some others so this took 3 attempts I think...in between 3-4 month breaks to get the 3.4 kernel booting but I finally got it.
I've got GPS fixed and I'm close on USB. Its proper in windows I think but Linux connectivity is still giving me issues. I'll try to get a new build up in a few days with all that.
I my self am on linux. I use elementray os.
2/28 build is up now, GPS and USB should be proper. OTG/dock still not working but not a major concern for now.
The new update says 403 forbidden when trying to download?
rippedwarrior69 said:
The new update says 403 forbidden when trying to download?
Click to expand...
Click to collapse
Fixed, any issues or things not proper other than what ive mentioned please let me know
Is there a flashible zip for twrp 2.8?
rippedwarrior69 said:
Is there a flashible zip for twrp 2.8?
Click to expand...
Click to collapse
No, I could likely make one though.
Use the did method outlined in the old recovery thread or cheat like I do and download "flashify" from market to flash recovery
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
rippedwarrior69 said:
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
Click to expand...
Click to collapse
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
jrior001 said:
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
Click to expand...
Click to collapse
Oh OK that's cool. Thank you again for the hard work.
rippedwarrior69 said:
Oh OK that's cool. Thank you again for the hard work.
Click to expand...
Click to collapse
Just put up a fresh build, IR blaster seems to be working now.
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
jrior001 said:
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
Click to expand...
Click to collapse
I don't either. Or I would.
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Nicklag said:
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Click to expand...
Click to collapse
If you wouldn't mind I'd like to see the logs when it craps out. I still have some hacks in place for debugging. When it acts up, reboot to recovery and grab the following:
/data/data/logcat.txt
/data/data/kmsg.text
/data/data/radio.txt
Oh and there is a newer recovery build and an updated build at the download link.
I'm dropping the "ALPHA" label at this point. Everything that should be working seems to be in order at this point and the builds are more than reasonably stable. I just uploaded a fresh build w/f2fs support on /data and /cache if anybody is interested in using that. Changing /data to f2fs will require a FULL factory reset and SDCARD wipe as sdcard is emulated on /data/media so be prepared to lose EVERYTHING. TWRP 2.8.5 is required if you wish to reformat anything as f2fs. Both are available at my codefire download link in the OP.
A few minor annoyances remain:
Charging is painfully slow.
USB OTG doesn't work at all.
Plugging USB to PC tends to create some nasty wakelocks.
LTE data is glitchy.
Keyboard dock support hasn't been brought in.