CyanogenMod is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{V}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project, a ROM for the Sony Xperia V
Contributors
FXP, kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
FXP said:
HOWTO
Install instructions:
...
- fastboot flash boot boot.img (from cm10 zip)
...
Click to expand...
Click to collapse
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
cpumaster said:
Followed the installation instructions but i get multiple system crashes. system, keyboard.... No homescreen and so on. Only thing i got working was the settings menu. Did i do something wrong or is there a fix for this? Went back to FXP246 10.2.....
Click to expand...
Click to collapse
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
alfanumerica said:
I've downloaded cm11. Should I really use kernel from cm10 or it's a typo?
Click to expand...
Click to collapse
Yes it's a typo, because i don't think that a cm10 kernel would work on cm11
When flashing the zip the kernel should be installed too, if you want though you can flash the kernel from the cm11 zip manually via fastboot.
paxy97 said:
Did you flash gapps, if yes did you change some files?, if no flash them, if the problem still occurs try without gapps :good:
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
Click to expand...
Click to collapse
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Camera doesn't work
Sent from my LT25i using Tapatalk
imk82 said:
Hi all,
can anyone share his experiences with the ROM? Especially whats not working until now or which "hard" bugs exist.
I want to use it, but at least it should be more or less stable (no reboots or something similar) and the "standard" things like Calls, Wlan and the system itself (Calendar, Contacts, Phone App and so on) should work. Things like a perfect camera or video play back are from a low priority for me.
Thanks and best regards
Imk82
Click to expand...
Click to collapse
the answer is in the first post it's really difficult to read?
"Version Information
Status: Testing"
Testing means that is really unstable and not for daily use, testing status means that who want to help can try the rom and report bugs to developers.
cpumaster said:
Yes i installed just as it was written in the post. So i installed 4.4 gapps and i did not try without it cos i need it... Could it be that the gapps i downloaded got corrupted?
Click to expand...
Click to collapse
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
paxy97 said:
Where did you download gapps from?
Edit: try these maybe: http://d-h.st/mDt
Click to expand...
Click to collapse
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
paxy97 said:
Strange AOKP doesn't seem to have that problem. Then only thing that crashes is Whatsapp.
Click to expand...
Click to collapse
Actually championswimmer's version is much like AOSP. There is no AOKP options, so that's why there is no conflict.
cpumaster said:
Thanks. But i got it working. Downloaded gapps again and that worked. Activated ART and everything started to crasch... Then i found this...
Warning: Do not try ART with the Paranoid Android (or other AOSP) build right now. There is an incompatibility with the current gapps package that causes rapid crashing, making the interface unusable.
So i will wait until this "bug" is fixed before i do further testing.
Click to expand...
Click to collapse
try this :
http://forum.xda-developers.com/showthread.php?t=2397942
All 4.4 GApps packages and addons are compatible with both ART and Dalvik runtimes
Guys don't use ART. Some apps don't work with it
Sent from my Nexus 4 using Tapatalk
working great with art runtime !
(i didnt install gapps yet)
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
androidseb said:
Anyone can send screenshots of cm11?
Gesendet von meinem LT25i mit Tapatalk Pro
Click to expand...
Click to collapse
It's still very very close to AOSP atm, so check out any Nexus 5 pics of KitKat, there's nothing really additional to it yet.
Hi. I have original firmware android 4.1.2 with unlock bootloader and root permission. I understand what i do to flash this version. Where i can found recovery?....this version is stable? What don't work fine in cm11? Thanks
Inviato dal mio GT-N8000 con Tapatalk 2
Related
CyanogenMod is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{Z}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project , a ROM for the Sony Xperia Z
Contributors
FXP, Kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
DOWNLOAD
http://unrestrict.li/FXP
Very cool, any known bugs?
Fantastic! Thank you FXP!
sound dont work
luissilva34 said:
sound dont work
Click to expand...
Click to collapse
meanwhile you can try CM11 from here http://cm11.karbowiak.dk/ but i think FXP 247 will have it fixed :fingers-crossed:
If im not wrong this is the same build posted a week ago fxp?
BoneMo said:
meanwhile you can try CM11 from here http://cm11.karbowiak.dk/ but i think FXP 247 will have it fixed :fingers-crossed:
Click to expand...
Click to collapse
My poor bandwidth
Anyway, it's building new builds every day around 18-19 GMT+1, till the official nightlies start.
Also a changelog can be found here: http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
Enjoy
LaMaaH said:
My poor bandwidth
Anyway, it's building new builds every day around 18-19 GMT+1, till the official nightlies start.
Also a changelog can be found here: http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
Enjoy
Click to expand...
Click to collapse
I'm on aokp right now. Do I have to work if I want to use your rom?
bariz143 said:
I'm on aokp right now. Do I have to work if I want to use your rom?
Click to expand...
Click to collapse
"my" rom is just plain CM11.
Not entirely sure, but you can try and flash it over (and add GAPPS aswell), and hope it'll use your data partition as is. Tho it might conflict
LaMaaH said:
"my" rom is just plain CM11.
Not entirely sure, but you can try and flash it over (and add GAPPS aswell), and hope it'll use your data partition as is. Tho it might conflict
Click to expand...
Click to collapse
It works good atm. But I get fc when trying to sync Google account. Says something about gapps. I flashed PA gapps right after rom btw
bariz143 said:
It works good atm. But I get fc when trying to sync Google account. Says something about gapps. I flashed PA gapps right after rom btw
Click to expand...
Click to collapse
Running ART? If yes, that might be why. I got the same gapps fc with it.
You can try and clear it's cache tho, that might fix it
LaMaaH said:
Running ART? If yes, that might be why. I got the same gapps fc with it.
You can try and clear it's cache tho, that might fix it
Click to expand...
Click to collapse
That solved it thank you.
So many apps crashes on ART, Titanium Backup, Whatsapp, Viber, Helium, etc. Hope they'll update these apps.
Yes they do for me to. But with the aokp rom everything works flawlessly with art on. Wonder why it doesn't work with this one.
BTW @LaMaaH your rom rocks. Just updated to your latest and it's smooth as butter.Anyway you could look into Art?
Guys does the red line at the side exists ? And lag on volume rocker and music unable to play in the latest
Sent from my C6603 using xda app-developers app
xZain69 said:
Guys does the red line at the side exists ? And lag on volume rocker and music unable to play in the latest
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
No it works great man. I mean lamahs build
they must have fixed it fully... then I will test
mx player hw+ and software decoder is not working =(, on dalvik
CyanogenMod is a free, community built distribution of Android 4.3 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{T}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project , a ROM for the Sony Xperia T
Contributors
FXP, kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Good luck, maybe CM11 nightly will boot when they come out
CM10.2 not booting from 11/11 ...
Sent from my Xperia T using XDA Premium 4 mobile app
Many lags and no sounds
so far so good with FXP247
iliasr21 said:
so far so good with FXP247
Click to expand...
Click to collapse
Could you be more specific
awesome rom (FXP247) but i have 1 problem
I cant change the keyboard
but after flashing pa gapps its fixed
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
adiq_ambro said:
Could you be more specific
Click to expand...
Click to collapse
stable enough for daily use
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
Mahthenewgamer1998 said:
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
Click to expand...
Click to collapse
yes i think its better.
iliasr21 said:
stable enough for daily use
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
yes i think its better.
Click to expand...
Click to collapse
Is it better in terms of features? Performance?
_Raziel666 said:
Is it better in terms of features? Performance?
Click to expand...
Click to collapse
has more features in launcher, performance is good but the only problem is that ART does not work so good as tilal's.
iliasr21 said:
has more features in launcher, performance is good but the only problem is that ART does not work so good as tilal's.
Click to expand...
Click to collapse
I don't think that by having more features in launcher, qualifies as 'better'. The majority that installs a custom ROM like CM or Omni or... usually installs a third party launcher as well. And if you consider that ART is not working as well as on Omni, I wonder if one can say that CM is better at this point.
Just my 2c...
i cant connect to wifi, it says "association rejected"
any help?
edit:
i managed to fix this, changed the wireless security from WPA to WPA2
_Raziel666 said:
I don't think that by having more features in launcher, qualifies as 'better'. The majority that installs a custom ROM like CM or Omni or... usually installs a third party launcher as well. And if you consider that ART is not working as well as on Omni, I wonder if one can say that CM is better at this point.
Just my 2c...
Click to expand...
Click to collapse
more space in my ram. ART uses a lot of space and my apps in sd card always disappeared after reboot. no problem with that now and i have no blue screens also.
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
iliasr21 said:
more space in my ram. ART uses a lot of space and my apps in sd card always disappeared after reboot. no problem with that now and i have no blue screens also.
Click to expand...
Click to collapse
There is no fix for blue screens that I've seen until now. They might be less or more frequent between ROMs but that's just because its random.
The apps disappearing issue should be fixed in the next build on omni.
Sent from my Xperia T using Tapatalk
Mahthenewgamer1998 said:
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
Click to expand...
Click to collapse
yes its stable than tilal's omni rom 4.4
no blue screen for now
r-l said:
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
very good sound and phone calls are fine, the link is in the fist post
tilal6991 said:
There is no fix for blue screens that I've seen until now. They might be less or more frequent between ROMs but that's just because its random.
The apps disappearing issue should be fixed in the next build on omni.
Sent from my Xperia T using Tapatalk
Click to expand...
Click to collapse
waiting
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
r-l said:
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://uploaded.net/file/3l0h2tdf/from/80a03i
This was a test build
CyanogenMod is a free, community built distribution of Android 4.4.3 (KitKat) which greatly extends the capabilities of your Tablet.
Code:
include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This build, builds on the CM-11.0 build of FreeXperia.
What is different:
New kernel from Sony Open source release 4.3
Kernel Rebased from CAF source kk2.7_1.38 (KitKat)
New vendor libraries from 4.4.2
Sensors(GPS/ACCEL/COMPASS) have been replaced by Stock vendor files, not build from source.
WiFi kernel drivers from CM - KERNEL
Display-CAF replaced by CAF implementation
Various tiny changes from GITHUB
IR Remote from sssemil here
Source: My Github
Bugs: That is why I created this, You tell me.
I have none critical as far as I know.
Thanks:
CyanogenMod, FreeXperia, Kali-, cdesai, AdFad666, and any other dev that I misssed.
Installation:
Backup your existing ROM/APPS Important!
Full Wipe is Required when coming from another ROM/Firmware version, so YEAH you need to wipe for first install.
Install via CWM
Install gapps
Reboot
This is WIP.
Work completed
Pollux is working 100%, WiFi(pollux_windy) version have GPS issue.
Download:
REMOVED
Please post Logs if you experience an issue:
I need Logcat & Kernel
Code:
For Logcat:
adb logcat >> logcat.log
For Kernel:
adb root
adb shell dmesg >> dmesg.log
Please upload to http://pastebin.com/ and share links here with error description and how to reproduce.
Anybody have some feedback for me?
Really would like to have some.
I'd give you feedback but i have the pollux_windy variant
pangiotis24 said:
I'd give you feedback but i have the pollux_windy variant
Click to expand...
Click to collapse
Thanks,
I will have to do a windy build, first I will have to get hold of the vendor libs etc, it will take some time. Let me see if I can but no promises. :good:
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
isimobile said:
I am looking for a WIFI tester.
You need to have Fastboot experience. You must understand that you will need to wipe your device to test and able to load you device from scratch if something goes wrong.
I don't want to scare anybody but just want to make sure you understand the risk but hopefully it will be all good.
Click to expand...
Click to collapse
Well, I've used fastboot , flashtool & Sony Emma to do various things...If it's not too complicated, I'm willing to try out your 311 build :fingers-crossed:
Will you post instructions here or PM me ?
GretaLewd said:
Well, I've used fastboot , flashtool & Sony Emma to do various things...If it's not too complicated, I'm willing to try out your 311 build :fingers-crossed:
Will you post instructions here or PM me ?
Click to expand...
Click to collapse
PM send.
Downloading now..will give you the feedback soon
Edit : so far everything works good.. will update you if any PBM found
Sent from my Xperia Tablet Z LTE using Tapatalk
311 build test
Sadly, GPS not working (same as with latest "official" CM11 nightlies).
GretaLewd said:
Sadly, GPS not working (same as with latest "official" CM11 nightlies).
Click to expand...
Click to collapse
try 0530 cm nightly.Gps works ok there
pangiotis24 said:
try 0530 cm nightly.Gps works ok there
Click to expand...
Click to collapse
Thanks for the info :good:
I'm actually testing the OP's 311 unofficial CM11 build, which seems to be working fine apart from GPS.
GretaLewd said:
Thanks for the info :good:
I'm actually testing the OP's 311 unofficial CM11 build, which seems to be working fine apart from GPS.
Click to expand...
Click to collapse
Please send me some logs, then I can investigate.
I do not own a windy I have the 3g/lte version, trying to see if I can help and resolve the GPS issue.
I added link to WiFi version.
Not working: GPS.
I need a logs to trace the error. Please post your logs for WiFi version. See second post of how to do that.
Note: I do not own a Windy just the 3g version, I would like and try an assist in finding the GPS issue but cannot without a tester willing to work with me in finding a solution. I hope I will be able to help.
isimobile said:
I added link to WiFi version.
Not working: GPS.
I need a logs to trace the error. Please post your logs for WiFi version. See second post of how to do that.
Note: I do not own a Windy just the 3g version, I would like and try an assist in finding the GPS issue but cannot without a tester willing to work with me in finding a solution. I hope I will be able to help.
Click to expand...
Click to collapse
I'll try to get you something a bit later. Just got home after a 12 hour shift at work - tired out :silly:
Still using your 311 ROM build for now, no problems - I don't really miss GPS.
Great to see this rom!
Gesendet von meinem LG-D802 mit Tapatalk
I'm really thinking about flashing CM on my pollux.
I could live without GPS for some time. What are the main differences between this builds and official CM builds?
Another question, if I do a full backup of my actual system, stock 4.4.2 sony firmware. Can I simply restore the backup to use the stock ROM again or do I have to do a normal flashing procedure?
romskii said:
I'm really thinking about flashing CM on my pollux.
I could live without GPS for some time. What are the main differences between this builds and official CM builds?
Another question, if I do a full backup of my actual system, stock 4.4.2 sony firmware. Can I simply restore the backup to use the stock ROM again or do I have to do a normal flashing procedure?
Click to expand...
Click to collapse
If you do a backup it you can restore and it should work.
On Pollux (3g/lte) the GPS is working, it is not working on pollux_windy (wifi)
The difference from normal cm is that I have used the new vendor libs from 4.4.2, the official one is still using the vendor libs from 4.2.2. My aim is to submit this changes to cm, but before I do that I would like make sure everything is working, that is why I created this thread. I am also using a the kernel from 4.3 release and it was rebased to include the the changes upto 4.4.2.
isimobile said:
If you do a backup it you can restore and it should work.
On Pollux (3g/lte) the GPS is working, it is not working on pollux_windy (wifi)
The difference from normal cm is that I have used the new vendor libs from 4.4.2, the official one is still using the vendor libs from 4.2.2. My aim is to submit this changes to cm, but before I do that I would like make sure everything is working, that is why I created this thread. I am also using a the kernel from 4.3 release and it was rebased to include the the changes upto 4.4.2.
Click to expand...
Click to collapse
okay great! I should try your build. What GAPPS do you recommend otherwise I would use BankS GAPPS.
The latest firmware from sony seems a bit laggy compared to 4.3. Is CM 4.4.3 yet published?
this build isn't up to date? As I saw the FreeXperia build wasn't it and your rebased kernel is inside?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We build this ROM using Mokee android source and tomato aka YU Yureka's source.
We are not the developer of this ROM. We just build this ROM with few bug fixes.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Note: After install do not uncheck chinese keyboard & please install gapps which contains google keyboard & then update google keyboard using PlayStore.
Otherwise you will get GoogleKeyboard FC error
Prerequists: YU should be on stock rom.
Use the recovery.img linked here. Otherwise chances of installation error due to device name missmatch.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
ROM Download:
MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
OLD:
ROM: MK44.4-tomato-201503040513-UNOFFICIAL.zip - 231.67 MB Bugs like FC on Display&Lights
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: recovery.img - 8.20 MB
gapps: gapps-kk-20140606-signed.zip
Installation:
First flash above recovery image file (CWM recovery). Do use this reovery image file or you'll get error.
Code:
sudo fastboot -i 0x1ebf flash recovery recovery.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install MK44.4-tomato-201503XXXXXX-UNOFFICIAL.zip (ROM file) from sdcard.
Reboot system & enjoy Mokee ROM.
If needed download & flash gapps also.
Tested following all are working...
WiFi, voice, Camera, Notification LED, SIM Setting from dialer.
BUG:
Settings->DisplayLights gives FC. Solved
XDA:DevDB Information
Mokee ROM for Yureka, ROM for the YU Yureka
Contributors
dumtara, sooorajjj
Source Code: https://github.com/YU-YUREKA/local_manifests/tree/kk_mkt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: Mokee
Version Information
Status: Beta
Created 2015-03-04
Last Updated 2015-03-12
Reserved
Review:
PRRash said:
Cant get the back key to work both with onscreen and hardware. However long press to kill app works fine. Anyone else with this ?? i did a clean install.
Edit: Also the default google keyboard does not work on start. I'm on latest pa gapps, never had this issue before.
Edit2: This is weird, i reinstalled the rom and this time i did not select onscreen keys and did not select the default input. The back key works and a default keyboard(some chinese name in "Language & input" setting) comes up. If i keep this keyboard as default, everything works fine, but the moment i change the default to google keyboard, my back key stops working & keyboard does not come up.
Edit3: I read your previous post, updating the google keyboard does the trick. Rom is smooth and fast. Thank you man @dumtara
Click to expand...
Click to collapse
SWAP3093 said:
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
Click to expand...
Click to collapse
SumiT1995 said:
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Click to expand...
Click to collapse
yes, same here...
Click to expand...
Click to collapse
suhas.holla said:
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Click to expand...
Click to collapse
aniketh12 said:
.....
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
Click to expand...
Click to collapse
SumiT1995 said:
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Click to expand...
Click to collapse
link added now.
This is a test RC build. You may get some FC issue.
Please report ERROR here , we will try to fix it.
Nice work mate
Trying your CM rom.
Will try mokee next.
Dev @dumtara man you are a blaze. CM,Carbon with updated versions n now mokee.
Take your time breathe some fresh air dev
RajGopi said:
Trying your CM rom.
Take your time breathe some fresh air dev
Click to expand...
Click to collapse
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
dumtara said:
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
Click to expand...
Click to collapse
Happy holi to YU too dev.
-Good News -
Display & Lights FC issue has been solved now.
Updated ROM will be uploaded soon. :victory:
-edit=
Link added MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
pkprasanna said:
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
Click to expand...
Click to collapse
Check the screenshots
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Hey Dumatra,
Kudos for all the development you are doing for Yureka.
But one request. Can u please stop adding assert statement in the updater script. or atleast add another check along with Yureka and Tomato.
whenever i wanna flash your kernel or any rom i need to be on stock rom, which is not the case.
And i know its very simple to edit the updater script and remove the assert statement. But i dont have a laptop right now and no PC other than the office one. So i cant edit the updater file when i want. Its causing a small prob.
But i do understand the risk of some noobs flashing wrong file on wrong device. But just think abt what you can do, to address this. Another check with tomato or AO5510 along with Yureka would be fine. or if you are ok, you can remove the whole assert statement and mention clearly in your thread as "this is only for yureka and not for coolpad or any clones"
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
^^^^
Use the recovery provided by me.
There are CWM and Phil recovery provided. Use any one of them. And you won't face this issue.
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
raman_ said:
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
Click to expand...
Click to collapse
you might have choosen the google keyboard and disabled the other keyboard.
flash latest gapps (link at OP) and update google keyboard from playstore.
keyboard & all 3 hardware key will work then.
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
Click to expand...
Click to collapse
yes, same here...
Good News...TWRP works
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
Samsung Galaxy Tab 2
AOSP - Project
This Rom is based on AOSP to give the user a pure AOSP feeling.
The builds only includes device specific changes to compile and get a booting AOSP!
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modifications, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Downloads:
ROM Downloads for all supported devices can be found here
(Those who have a repartitioned system partition use "not-block-based" builds! Other builds won't be flashable on those devices!)
[#DONATETOME]
FAQ
Q: Will there be any updates?
A: Yes, there will, but only if i can fix a bug or AOSP releases an Update - else there's no update needed.
Q: There's a nice feature in XXX-Rom and i like to have this included - ADD IT!
A: Sorry, i'lll keep this Rom Stock-AOSP as possible. Maybe XXX-Rom is a better choice for you, if you really need this feature.
Q: How to enable root?
A: This Rom doesn't have root included. Why? Because root isn't part of AOSP. You can find the way to SuperSU Thread from @Chainfire and download SuperSU as flashable-ZIP if you need root.
Q: Is it possible to overclock the kernel?
A: Yes and no. First of all you need root and a Kernel-App like KernelAdiutor. After that you can slight OC the CPU & GPU - this Rom includes latest SlimLP Kernel.
Q: I found a bug.
A: Nice finding my friend Please provide needed logs - ADB will be your best friend, if you are replying in a development thread
There's a lot of tutorials out on YouTube or XDA on how to setup and use ADB - it's really simple!
At least you should tell step by step how to reproduce the issue.
I started creating a gerneral FAQ on my github - it includes instructions how to flash a Rom, how to get proper logs, etc. etc. etc., you can find it here
Changelog
Code:
2015-11-08 It's stock AOSP as released by Google (Android 5.1.1 R29 LVY48I), only additions
- screenshot: quick delete action
- advanced reboot menu
- Launcher3 instead Launcher2
- BootMessage: Show each app name being optimized during boot
- Show application's package name in the "App info" screen.
- Open app when clicking on icon in App Info screen
(... forgot about the releases between ...)
2015-08-07 based on Android 5.1.1_r9
XDA:DevDB Information
[P31xx][5.1.1] Samsung Galaxy Tab 2 AOSP-Project, ROM for the Samsung Galaxy Tab 2
Contributors
Android-Andi
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-08-07
Last Updated 2017-04-30
Wow! Andi!
Nice to see that AOSP Lollipop came to us again! Great work dev, @Android-Andi ?
Sent from my GT-P3100 using Tapatalk
Amazing, pure LP AOSP for my tab 2.
I really appreciate it...
Is f2fs in Cache and Data supported in this ROM?
Sent from my GT-P3100 using Tapatalk
Bhaskara Rao said:
Is f2fs in Cache and Data supported in this ROM?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
No, sry. Think it needs quite more changes than i would like to add... But i will take a closer look next time
Wow, this is awesome. Now I need to see if I can port Layers on top. Thanks Andi!!!
Sent from my Nexus 6 using Tapatalk
Thank you, Andi for the latest AOSP. No issues on clean installation. ROM is fluid. YouTube is not working. Logs attached.
Bhaskara Rao said:
Thank you, Andi for the latest AOSP. No issues on clean installation. ROM is fluid. YouTube is not working. Logs attached.
Click to expand...
Click to collapse
Thanks buddy I'll look into it next week, have some more time then
Clean install of latest AOSP (aosp_p3110-20150807.zip) with Dhollmen 3.0.101 kernel.
Youtube is working, but 720P videos do not work.
ilyichspb said:
Clean install of latest AOSP (aosp_p3110-20150807.zip) with Dhollmen 3.0.101 kernel.
Youtube is working, but 720P videos do not work.
Click to expand...
Click to collapse
Hey bruh @ilyichspb i also want to flash my kernel
I have tried but i softbricked my tab.
So,it will be great if you tell me the steps to flash a kernel.:laugh:
Aosp is smooth and lagfree.great work Andi.:fingers-crossed::good:
AFAIK Dhollmen Kernel doesn't have a fix for emmc bug. Only Android-Andi's ROMs and Recoveries have it. Take an informed decision before flashing custom kernels.
Sent from my GT-P3100 using Tapatalk
[email protected] said:
So,it will be great if you tell me the steps to flash a kernel.:laugh:
Click to expand...
Click to collapse
full wipe
install (via CWM)
AOSP
kernel
gapps
reboot
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
Bhaskara Rao said:
AFAIK Dhollmen Kernel doesn't have a fix for emmc bug. Only Android-Andi's ROMs and Recoveries have it. Take an informed decision before flashing custom kernels.
Click to expand...
Click to collapse
Looks like you are right. I will keep an eye on that. So far everything is working fine.
Seems like google went to nightly builds, r12 source released
Thanks!, will try soon
What is the recommended recovery to install this rom. I'm still running old ketut's stock rom. Thanks
Android-Andi's latest TWRP.
https://www.androidfilehost.com/?w=files&flid=25704
Sent from my GT-P3100 using Tapatalk
Bhaskara Rao said:
Android-Andi's latest TWRP.
https://www.androidfilehost.com/?w=files&flid=25704
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Whenevr i go to recovery i.e,twrp wipe>advance wipe>change system partition
Twrp says invalid partition select
I have tried this in both android andi's twrp and official twrp
I'm on p3100.
What to do.need help:victory:
I want to flash a rom withf2fs support thats why
[email protected] said:
Whenevr i go to recovery i.e,twrp wipe>advance wipe>change system partition
Twrp says invalid partition select
I have tried this in both android andi's twrp and official twrp
I'm on p3100.
What to do.need help:victory:
I want to flash a rom withf2fs support thats why
Click to expand...
Click to collapse
AOSP doesn't support f2fs.
About f2fs: take my twrp with "f2fs" in it's name. If you have more question about recovery then use the recovery thread pls.
Android-Andi said:
AOSP doesn't support f2fs.
About f2fs: take my twrp with "f2fs" in it's name. If you have more question about recovery then use the recovery thread pls.
Click to expand...
Click to collapse
Sorry! I got the sol of my problem
i didnt select cache and data before tapping on change partition
One question
Does Your latest recovery i,e. 2.8.7.1 supports f2fs.
i want to post this in recovery thread but xda said that u have less than 10 posts