Database Develop

[ROM][JB][4.3][N8000][N801X] CyanogenMod 10.2 EXPERIMENTAL

CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
My builds uses all official CyanogenMod sources except the kernel. But I am merging it with all fixes/features from CM kernel repo, Google and kernel.org mainline too.
Downloads
Latest HumberOS
Installation
- First time flashing CM10.2 to your device (or coming from another ROM)?
Root your device and install CwM Recovery* or TWRP.
Reboot into Recovery
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using CwM Recovery or TWRP
FAQ
Q&A thread
Please read before posting or reporting bugs!
Reporting Bugs
Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Please read the thread for known issues before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Tablet model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
----------------------------------------------------
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
----------------------------------------------------
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
----------------------------------------------------
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
IRC
User channel
#cyanogenmod
#teamhacksung-support
Developer channel
#teamhacksung
#cyanogenmod-dev
Changelog?
A rough changelog is available HERE
All Sources
HumberOS
CyanogenMod
SGT7
N80XX
Special Thanks
@cdesai
@sbradymobile
@cyangenmod-team
______________________________________________________________
The CyanogenMod team would like to THANK everyone involved
in helping with testing, coding, debugging enting!
Enjoy!
​

reserved
reserved
.............

Thanks for your great job, Bro.

Downloading! Nice work man. I saw that the 801X folder just got a new build, is the 8000 also being updated? If thats the case I hold of on flashing the 130821 build.
Thanks for all your hard work.

Wait what, am I missing something? This ROM has HALO? That's awesome, but a bit surprising as I thought this was just CyanogenMod with your kernel. Not complaining as I've wanted to try it out for a while but it was a shock to see.

nickwarn said:
Downloading! Nice work man. I saw that the 801X folder just got a new build, is the 8000 also being updated? If thats the case I hold of on flashing the 130821 build.
Thanks for all your hard work.
Click to expand...
Click to collapse
Uploading N8000 right now.
iofthestorm said:
Wait what, am I missing something? This ROM has HALO?
Click to expand...
Click to collapse
Yes. We have HALO and old tablet UI ported to 4.3.
Enjoy it!

humberos said:
Uploading N8000 right now.
Just Downloaded 21-8 version, will wait for the new one & flash it instead
Click to expand...
Click to collapse

The 8000 version is just excellent! Very smooth and fast. Thank you OP

Everything is working quite well, I've found 2 things that not working properly:
It's impossible to delete the shortcut from the lock screen
Sometimes, in some apps like Gmail , the screen goes black
Inviato dal mio GT-N8000 usando Tapatalk 4

Hi boys
Ive been using this excelent ROM and only found 2 errors
1 the camera doest work . neither the focal .
2 the Google drive get permanent error
Gapps are the 20130813
Thank you!

My feeeback:
While using stock browser the header(2 inch long bar appears @top of screen) keeps flashing when trying to scroll then goes black, same thing with dolphin browser.
Im no expert but 4.3 might need some tweaking for our video cards. This is experimental so its pretty darn good to even run.
Focus camera FC's.
Random reboots.
Thanks for letting us try this out.
Sent from my GT-N8000 using Tapatalk 2

Kwaii49 said:
My feeeback:
While using stock browser the header(2 inch long bar appears @top of screen) keeps flashing when trying to scroll then goes black, same thing with dolphin browser.
Im no expert but 4.3 might need some tweaking for our video cards. This is experimental so its pretty darn good to even run.
Focus camera FC's.
Random reboots.
Thanks for letting us try this out.
Sent from my GT-N8000 using Tapatalk 2
Click to expand...
Click to collapse
I get the same thing in Stock browser but chrome works just fine for me.
Sent from my EVO using xda premium

Graphical glitches
Hello to all,
cm team solved the graphical glitches. Works for my S3 and N8010.
Edit the build.prop file in the system folder:
OLD: hwui.render_dirty_regions=false
NEW: debug.hwui.render_dirty_regions=false
--> reboot
:good:

Hi fríends
I must return to 4.2 because gapps were to unstable. Hangouts keep chrome and youtube always on fc.
Very sorry about that.

@humberos
Is it possible to have a flashable zip of your latest kernel compatible with official cm?
If this isn't possible, how can i make a zip always compatible with official cm?

iRoNX said:
@humberos
Is it possible to have a flashable zip of your latest kernel compatible with official cm?
If this isn't possible, how can i make a zip always compatible with official cm?
Click to expand...
Click to collapse
Do you want to use this kernel over official buids?
Just replace boot.img file into rom install package.
Or
I made a flashable package (only kernel install) for N801x and you can use it as sample for anothers variants.
Please, check this file: META-INF/com/google/android/updater-script
You'll see the install script.
Cheers!

Sorry I can't find the ROM download link for n8000 .. I'm only getting source links but missing the install zip...I hope you can help I really would like to test this ... !!
Sent from my GT-N8000 using Tapatalk 4

xX_Nexus_Xx said:
Sorry I can't find the ROM download link for n8000 .. I'm only getting source links but missing the install zip...I hope you can help I really would like to test this ... !!
Sent from my GT-N8000 using Tapatalk 4
Click to expand...
Click to collapse
http://sourceforge.net/projects/humberos-cm/files/n8000/
Or click the link above the qr code on the page in the op.
Sent from my EVO using xda premium

tourbound129 said:
http://sourceforge.net/projects/humberos-cm/files/n8000/
Or click the link above the qr code on the page in the op.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks .. Download started
Sent from my GT-N8000 using Tapatalk 4

@humberos
Good morning Sir.
Just saw a new Version (20130830) for the N801x on your download site.
Installed and every thing is fine.
I appreciate your work... Thanks
Sent from my GT-I9300 using XDA Premium 4 mobile app

[ROM][4.4.4]Mokee ROM for Yureka [Unofficial]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We build this ROM using Mokee android source and tomato aka YU Yureka's source.
We are not the developer of this ROM. We just build this ROM with few bug fixes.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Note: After install do not uncheck chinese keyboard & please install gapps which contains google keyboard & then update google keyboard using PlayStore.
Otherwise you will get GoogleKeyboard FC error
Prerequists: YU should be on stock rom.
Use the recovery.img linked here. Otherwise chances of installation error due to device name missmatch.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
ROM Download:
MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
OLD:
ROM: MK44.4-tomato-201503040513-UNOFFICIAL.zip - 231.67 MB Bugs like FC on Display&Lights
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: recovery.img - 8.20 MB
gapps: gapps-kk-20140606-signed.zip
Installation:
First flash above recovery image file (CWM recovery). Do use this reovery image file or you'll get error.
Code:
sudo fastboot -i 0x1ebf flash recovery recovery.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install MK44.4-tomato-201503XXXXXX-UNOFFICIAL.zip (ROM file) from sdcard.
Reboot system & enjoy Mokee ROM.
If needed download & flash gapps also.
Tested following all are working...
WiFi, voice, Camera, Notification LED, SIM Setting from dialer.
BUG:
Settings->DisplayLights gives FC. Solved
XDA:DevDB Information
Mokee ROM for Yureka, ROM for the YU Yureka
Contributors
dumtara, sooorajjj
Source Code: https://github.com/YU-YUREKA/local_manifests/tree/kk_mkt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: Mokee
Version Information
Status: Beta
Created 2015-03-04
Last Updated 2015-03-12

Reserved
Review:
PRRash said:
Cant get the back key to work both with onscreen and hardware. However long press to kill app works fine. Anyone else with this ?? i did a clean install.
Edit: Also the default google keyboard does not work on start. I'm on latest pa gapps, never had this issue before.
Edit2: This is weird, i reinstalled the rom and this time i did not select onscreen keys and did not select the default input. The back key works and a default keyboard(some chinese name in "Language & input" setting) comes up. If i keep this keyboard as default, everything works fine, but the moment i change the default to google keyboard, my back key stops working & keyboard does not come up.
Edit3: I read your previous post, updating the google keyboard does the trick. Rom is smooth and fast. Thank you man @dumtara
Click to expand...
Click to collapse
SWAP3093 said:
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
Click to expand...
Click to collapse
SumiT1995 said:
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Click to expand...
Click to collapse
yes, same here...
Click to expand...
Click to collapse
suhas.holla said:
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Click to expand...
Click to collapse
aniketh12 said:
.....
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
Click to expand...
Click to collapse
SumiT1995 said:
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Click to expand...
Click to collapse

link added now.
This is a test RC build. You may get some FC issue.
Please report ERROR here , we will try to fix it.

Nice work mate

Trying your CM rom.
Will try mokee next.
Dev @dumtara man you are a blaze. CM,Carbon with updated versions n now mokee.
Take your time breathe some fresh air dev

RajGopi said:
Trying your CM rom.
Take your time breathe some fresh air dev
Click to expand...
Click to collapse
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:

dumtara said:
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
Click to expand...
Click to collapse
Happy holi to YU too dev.

-Good News -
Display & Lights FC issue has been solved now.
Updated ROM will be uploaded soon. :victory:
-edit=
Link added MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB

Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??

pkprasanna said:
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
Click to expand...
Click to collapse
Check the screenshots

Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA

Hey Dumatra,
Kudos for all the development you are doing for Yureka.
But one request. Can u please stop adding assert statement in the updater script. or atleast add another check along with Yureka and Tomato.
whenever i wanna flash your kernel or any rom i need to be on stock rom, which is not the case.
And i know its very simple to edit the updater script and remove the assert statement. But i dont have a laptop right now and no PC other than the office one. So i cant edit the updater file when i want. Its causing a small prob.
But i do understand the risk of some noobs flashing wrong file on wrong device. But just think abt what you can do, to address this. Another check with tomato or AO5510 along with Yureka would be fine. or if you are ok, you can remove the whole assert statement and mention clearly in your thread as "this is only for yureka and not for coolpad or any clones"
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable

^^^^
Use the recovery provided by me.
There are CWM and Phil recovery provided. Use any one of them. And you won't face this issue.

flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...

Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks

raman_ said:
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
Click to expand...
Click to collapse
you might have choosen the google keyboard and disabled the other keyboard.
flash latest gapps (link at OP) and update google keyboard from playstore.
keyboard & all 3 hardware key will work then.

Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium

raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
Click to expand...
Click to collapse
yes, same here...

Good News...TWRP works
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0

crDroid [ROM] [GT-I9300] [MM Build] [6.0.1] [Weekly] [Unofficial] [20160215]

Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid

Reserved 1 (Screenshots)
Someone please share some screenshots!

FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.

yess i'v ben waiting for this rom to get MM

ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try

nice new rom for s3 thinks Dev

spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy

P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information

sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300

jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?

Are you maintaining this ROM now?

sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!

sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?

jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?

sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.

jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!

sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0

jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.

Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks

sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result

[PORT] [Unofficial] [OTA] [6.0.1] TEMASEK/AOKP/RR/ ROM's for Tab 3 SM-T217T/S

Removed

Looking forward to trying these out. Thanks for the time and effort.
Sent from my SM-N920P using Tapatalk

fsunoles101 said:
Looking forward to trying these out. Thanks for the time and effort.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Welcome

How will the ROM flash succeed on this device? It checks if the device is a meliusltexx or melius3gxx before flash and proceed only if it finds either. OTA updates will work after you flash this rom once because it will rename the device to meliusltexx.

Silesh.Nair said:
How will the ROM flash succeed on this device? It checks if the device is a meliusltexx or melius3gxx before flash and proceed only if it finds either. OTA updates will work after you flash this rom once because it will rename the device to meliusltexx.
Click to expand...
Click to collapse
The twrp recovery is modified and about the device changing to meliusltexx it always happens..
Check this similar thread
Marshmallow collection For tab 3 t217s/t

Invalid thread.
Sent from my LenovoA3300-GV using Tapatalk

Silesh.Nair said:
Invalid thread.
Sent from my LenovoA3300-GV using Tapatalk
Click to expand...
Click to collapse
Which is invalid thread .?

Nevermind. The link you gave me said invalid thread on tapatalk

http://forum.xda-developers.com/galaxy-tab-3/development-7/rom-marshmallow-t3320843
Try that @Silesh.Nair ..

This ROM is perfect besides the fact in YouTube I've lost the option to watch videos in 720p.. But damn, it feels like a nexus 7.. You relived my tab.. Thanks a million and keep up the great work..
---------- Post added at 09:36 AM ---------- Previous post was at 09:29 AM ----------
[email protected] said:
This ROM is perfect besides the fact in YouTube I've lost the option to watch videos in 720p.. But damn, it feels like a nexus 7.. You relived my tab.. Thanks a million and keep up the great work..
Click to expand...
Click to collapse
Sorry I replied to the wrong thread... Will delete soon

It's a very snappy ROM. Alot of the built in apps for mi are in a Foreign language though.
Even though I switch keyboards I still occasionally get a FC for the Android keyboard which is a little annoying.
Otherwise, nice job, keep up the good work.
Sent from my GT-I9205 using Tapatalk

mattbeau said:
It's a very snappy ROM. Alot of the built in apps for mi are in a Foreign language though.
Even though I switch keyboards I still occasionally get a FC for the Android keyboard which is a little annoying.
Otherwise, nice job, keep up the good work.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Go to settings And then Apps there is option where you can disable the android keyboard.. I did that no more FC..

Woops that was supposed to be posted in you mi rom. Thanks for the tip
Sent from my SM-G930V using Tapatalk

Thanks for the awosome roms and your support

majorkid said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Google These ROMS IF YOU WANT TO KNOW MORE ABOUT THEM.
*OTA UPGRADE SUPPORTED..
Download Links
ROM :Download ROMS
GAPPS:OPENGAPPS
RECOVERY:TWRP 3.0.2-1
KERNEL:CM13 Kernel
PATCHER:LT02LTEXX-PATCHER-3.0.ZIP
UPGRADES
Upgrades from previous versions of ROM's are the same process as install, except you do not need to wipe anything.
Except when you are upgrading from a diffrent ROM ..
INSTALLATION
-Flash The TWRP Recovery..
- FLASH the TWRP
- Download ROM and OPEN GAPPS 6.0 Arm PICO
- Download lt02ltexx-patcher-3.0.zip
- Download CM13 kernel above
- Boot into Recovery
- Make Backup
- Wipe / Factory Reset
- Flash
* ROM
* GAPPS
* LT02LTEXX-PATCHER-3.0.ZIP
* CM13 KERNEL
- Reboot System
Updates
When You Get OTA update
Download the Rom update
- Reboot into Twrp Recovery (no need to wipe and no need to flash gapps when upgrading)
- Flash
* ROM
* LT02LTEXX-PATCHER-3.0.ZIP
* CM13 KERNEL
- Reboot system
Thanks
1.RR TEAM
2.AOKP TEAM
3.TEMASEK
4.BROKENOS
5. @DarkFrenzy
6. @Silesh.Nair
7. @majorkid
8.OpenGapps
9.Any Person who contributed to the development..
*Please pay a visit to his page and give him thanks ..
BUGS
The bugs will be fixed by the developer himself..
The original dev page is :ROM FOR MEGA 6.3
About
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based on: CyanogenMod
Click to expand...
Click to collapse
For some reason when I flash any roms with versions of android over 4.4.4 they bootloop.

@vibraniumdroid Don't quote the OP..
Which device ? Which Rom ? Are you rooted ?

Thread closed per OP request.

[ROM] Z.A.D.Mix7 -Stock Marshmallow Base Rom-

ZAxon DMix7
v0.3​
Read Carefully!
​
Code:
#include
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Hello everyone,
Here i am for the first time posting a ROM (yeah never had done such thing, tilll now :O so kill me if there is something wrong OK ) here are the following changes from Stock Rom.
Changes / Features:
- Base on A2017U B29.
- Partial de-bloated. (If Want more De-bloated version let me know in the comments)
- Deodex.
- Rooted (Using SuperSU v2.65).
- 5 Extra Themes for the Total of 7 themes.
Click to expand...
Click to collapse
Requirements:
- Unlock Bootloader
- Latest TWRP 3.02-2
- B29 Update
Click to expand...
Click to collapse
Notes:
- YOU MUST BE UNLOCK BOOTLOADER (Haven't tested for Lock Bootloader and if you are flashing this using lock Bootloader you are on your own)
- If you already have B29 installed, you can dirty flash ZAxon DMix7, apps/data won't be touch but if you have Xposed you need to reflash Xposed again.
- If you are not on B29 , you can update using the following guide :[GUIDE] A2017U.B29 Update
Click to expand...
Click to collapse
Download Link :
ZADMix7_Roms
Click to expand...
Click to collapse
Installation:
1- Reboot to TWRP
2- Wipe Cache - Dalvik
NOTE: If you are already have B29 you can dirty flash Dmix7, if NOT you will need to Wipe DATA.
3- Flash ZAxon_Dmix7_v0.1.zip
* Additional If you want Xposed , Flash Xposed after Dmix7
Click to expand...
Click to collapse
Thanks To/Credits:
* @ SuperR. for his super kitchen Linux Tools
Click to expand...
Click to collapse
XDA:DevDB Information
Z.A.D.Mix7, ROM for the ZTE Axon 7
Contributors
DrakenFX, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: B29
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v0.1
Stable Release Date: 2016-11-07
Created 2016-11-08
Last Updated 2017-04-09

Wow, another rom, i'm surprised to see another one. First the CM 13, now Nello, now this. Going to test it out

Change Log​
* v0.1
- Initial Release.
- SuperSU v2.65
- Partial De-Bloated.
- Deodex.
- 5 Extra Themes (Total of 7 Themes).
*v0.2
- More De-Bloating
- On-Screen Navigation Bar.
- Multi-User (Up to 5 users)
*v0.3
- More De-Bloating (There be no more de-bloating after this)
- Google Dialer
- Google Contact
- Solid Explorer
- Nova Launcher Beta 5.0 beta 8
- Textra feel better than Google Messenger (if you haven't use it you'll love it)
- Added AdAway.
- Some Build.prop tweaks.

TROUBLESHOOTING
Q. How to disable On-screen keys?
A. Using your favourite Build.prop editor, look for this line:qemu.hw.mainkeys then change 0 for 1 and reboot.
Your On-screen Nav. Bars will be disabled permanent, till you change the value back to 0.
Q. AdAway or DPI changes are not working?
A. try disabling system write
* Using ADB
Code:
adb shell reboot disemmcwp
* Using Terminal Emulator
Code:
su
reboot disemmcwp
Your device will REBOOT and try again.
.

Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Edit: booted and working fine
Sent from my ZTE A2017U using Tapatalk

`SBR` said:
Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?

It's raining ROMS!

I may be missing something here but where is the download link?

Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!

tabletalker7 said:
I may be missing something here but where is the download link?
Click to expand...
Click to collapse
tele_jas said:
Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!
Click to expand...
Click to collapse
hehehehe sorry guys, forgot to attach the link , done now.

Downloading now:fingers-crossed:

DrakenFX said:
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?
Click to expand...
Click to collapse
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk

`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I never try the b03 one, but I always test my files before posting and hopefully with little more time I'll be doing more modifications to it

`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Mine literally took 7 minutes to get past the Boot logo... You might give it a few minutes?

tele_jas said:
Mine literally took 7 minutes to get past the Boot logo
Click to expand...
Click to collapse
Yep, as it's deodexed initial boot to build the cache is more longer time...
Sent from my ZTE A2017U using Tapatalk

Confirmed as working - dirty flashed over B29, installed xposed framework at same time, everything working perfectly. Good job man

The more custom ROMs, the merrier!
Might be good to have a general outline on what has been removed during debloat.
Also, how big are those extra themes? Depending on how big they are, maybe it would be good to break them out into a separate, optional flashable zip.

Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!

tele_jas said:
Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!
Click to expand...
Click to collapse
How its battery life ?
Sent from my Pixel using XDA-Developers mobile app

Not too shabby