I bricked my SM-T900 Wifi while attempting to root it. Can anyone help me get it un-bricked?
Here's a step by step list of what I did and what happened:
1. Turned on USB debugging mode
2. Downloaded and installed Samsung kies
3. Downloaded the file for SM-T900 from autoroot [dot] chainfire [dot] eu/ (it won't let me post outside links)
4. Turn off tablet, get into custom firmware installation mode by holding power, volume-, and home, then confirm the warning
5. run Odin (v3.07, came in the zip file)
6. plug in tablet, tablet showed up as a com port but did NOT show any other information. I don't know if it was supposed to show anything else but I hadn't though about that at the time.
7. Clicked on PDA and selected the file CF-Auto-Root-v2wifi-v2wifixx-smt900.tar.md5
8. Clicked start
9. Waited, it said it was doing something with cache, I don't recall exactly what it said
10. after about 3 minutes the screen looked wrong, all the pixels were different colors, (rainbow static?)
11. Waited about 10 minutes just in case that was not a sign of failure, then Odin reported that it failed.
Now when I press the power button, I get the screen that says "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again"
I tried using that in Kies but Kies can't connect to my tablet any more. When I try to use Odin using the recovery with power, vol-, home, it detects that I plugged it in but when I try to click start it fails and nothing happens.
I have exact the same problem.
I have read many articles, who said it was easy to root.
That's not true !!!!.
Maybe because the tablet became an update today ?
What I did to recover the tablet: (phew !!!)
Download this bootloader:
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
Connect to Odin and flash it.
A few seconds, it says OK, reboots and voila: there's your tablet again revived !!!!.
rumaro said:
I have exact the same problem.
I have read many articles, who said it was easy to root.
That's not true !!!!.
Maybe because the tablet became an update today ?
What I did to recover the tablet: (phew !!!)
Download this bootloader:
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
Connect to Odin and flash it.
A few seconds, it says OK, reboots and voila: there's your tablet again revived !!!!.
Click to expand...
Click to collapse
Unfortunately Odin fails before it manages to even connect to my tablet so I'm not sure it will work for me but I'll give it a try. It managed to connect before when I tried to flash the root files but now it fails every time. I'll update this when I get home and try flashing that.
Edit:
Got home, tried your fix. I am happy to report it worked and it only took a few seconds. Thanks!
Edit:
To anyone reading this thread, if you tried rooting your SM-T900 using the SM-T900 files for rooting, try using the SM-P900 files instead! I just tried that and it seems to be working fine.
I'm glad I could help. :good:
It's bad for your heart when you see that your expensive tablet is bricked.
Hello everyone. Where do I flash the bootloader in odin? Do I use PDA or Bootloader and do I need to check the bootloader update box? Just wanted to confirm before further messing up my tablet. Thanks!
Edit: Never mind, figured it out. Thanks for the help!
This method just worked for me. Flashed the bootloader with Odin after getting "stuck" and it booted right up.
Jim
sizedlemming65 said:
Hello everyone. Where do I flash the bootloader in odin? Do I use PDA or Bootloader and do I need to check the bootloader update box? Just wanted to confirm before further messing up my tablet. Thanks!
Edit: Never mind, figured it out. Thanks for the help!
Click to expand...
Click to collapse
What did you do exactly to fix it? I'm having the same issue. Just sits at screen and says:
ODIN MODE
Product Name: SM-T900
Current Binary: Custom
System Status: Official
KNOX Warranty Void: 1
RP SWREV: A1
How do you use that recovery.img file?
For the top most problem flash cwm or TWRP recovery through Odin or through recovery mode then boot into cwm or TWRP recovery delete all files and install a supported rom.
If u want full explained steps mail me
- [email protected]
Sent from my SM-J500F using XDA Forums
it's 2022 & my T900 finally went into bootloop in model logo, does anyone know the real reason for this? is it hardware or software problem?
- I can flash any version via odin but still bootloops
- TWRP worked once after that can't get in anymore
- the only button working is for the download mode PWR + Vol Down
- before all this LED Stayed on until batt drained then bootloops
it's a good tab to watch movie while on a treadmill
Related
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
water30 said:
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
Click to expand...
Click to collapse
what did you do to get to this screen? Is this after or before you upgraded firmware?
GANJDROID said:
what did you do to get to this screen? Is this after or before you upgraded firmware?
Click to expand...
Click to collapse
after upgrade firmware odin show reset but the my tab not reset then i just manual reset (i can take this method for my galaxys ) after that.....
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
primeroz said:
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
Click to expand...
Click to collapse
Read my above post. Go into download mode (volume down + home + power) you'll still have the same image but the phone WILL be in download mode. Then flash your previous firmware and you're sorted.
Sent from my GT-P1000
You probably got that by messing with the kernel. Fund the zImage from the firmware, extract it with a .tar extractor then use something like heimdall to flash the kernel and it should work.
Sent from my GT-P1000 using Tapatalk
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Help please
slaia said:
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Click to expand...
Click to collapse
Having the same problem too... anyone can help?
If you see Phone-!-Pc on the Tab screen it is the download mode.
You can reflash it using Odin, however, you will need to do full Rom flash. I had similar problem and solved it by replashing.
I followed the latest guide published in this forum and Roto-JME rom with reformatting of internal sd.
Phone ! PC error FML!!!
GANJDROID said:
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
Click to expand...
Click to collapse
Where can i download the JM6 zip??
Hey guys,
I tried to manually update my tab to Gingerbread today via Odin, but it kept hanging on select partition (I discovered I used the wrong PIT for the firmware I was going to flash, but as I didn't select the firmware yet that shouldn't be a problem). At last I decided to quit Odin (which might have been stupid...) and try it again. Then it kept haning even earlier, so I tried to restart the device in download mode. However, whatever I try it keeps giving the Phone ! PC sign. If I try to just boot, if I try to go into recovery mode or if I try to go into download mode. I saw a lot of possible ways to solve the problem, but my PC doesn't recognize the tab anymore. If I connect it, it does give the "usb device connected" sound, but there is a popup which sais "USB Device not recognized. One of the USB Devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message". I already tried to reinstall the driver but it doesn't work. Also Odin and Heimdall don't detect any device.
Does anyone know a solution for this problem? Maybe taking the battery out? (for which I have to buy a new triangle screwdriver, so I need to know if it could possibly work first. It takes some weeks to order such a thing I think...)
EDIT: I played around a bit with the drivers again, and suddenly both Heimdall and Odin recognized it. However Odin stopped recognizing it again. Then I pressed "read PIT" in Heimdall, which worked. After that the device started booting up to the Samsung logo animation and then powered off again. Now it doesn't do anything anymore, not even showing the Phone ! PC screen. I'll charge it overnight (maybe it's gone empty during the process), so I hope that helps.....
In some strange way, the phone works again..... So never mind my post above.
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?
I think you have to start from Gingerbread again
Search on samifirmware a 3 files firmware of Android 2.3.6
After that search on google a Step by Step guide how to flash a Rom with Odin.
I think after that i should work.
ChrissehB said:
So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?
Click to expand...
Click to collapse
Nothing. Never put anything in the bootloader section. Instead, look for a rom that has bootloader in it. I believe that the darky resurrection rom has bootloader.
Sent from my Nexus 7 using Tapatalk 2
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)
Boot loops with cm-10-20121125-NIGHTLY-galaxysmtd & cm-10-20121126-NIGHTLY-galaxysmtd
frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
Click to expand...
Click to collapse
Thank you very much for the information!
I was thinking I did something wrong... :crying:
Update:
The newer versions cm-10-20121129-NIGHTLY-galaxysmtd & cm-10-20121130-NIGHTLY-galaxysmtd are OK again.
With kind regards
Joe
frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)
Click to expand...
Click to collapse
I want to buy you a beer Thanks a ton
I did this on windows 7 x64 without any problems (I had to install driver from heimdall suite)
Same here, but computer WON'T detect, normally does
Hi
I'm desperate, no phone, stuck on galaxy S boot screen, will boot into download mode but not recognised by computer
Any ideas?
Thanks
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
XerorebornX said:
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
Click to expand...
Click to collapse
Are you using Kies 3 or just the regular Kies?
Try putting the phone in download mode yourself, then plug into kies 3
Still no
Are you using Kies 3 or just the regular Kies?
Click to expand...
Click to collapse
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
Try this my friend (Same as above post sorry)
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
itmaster85 said:
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Problem solved!!!
Thank you so much
so i recently got a note 3 from a friend to fix for her. it boots to the samsung logo then vibrates and reboots over and over, recovery just says "booting recovery" then it goes blank and reboots to the same booting recovery screen, shes doesnt know what version it had prior to bricking. she said one day it was working then turned off and never back on again, the odin mode screen had a2, a3 on it ill post a pic later anyway i can get into download mode so i figured id just flash with odin and be good, i tried to narrow down the proper firmware with the a3, but after flashing nc2, nl1, oc1, im still stuck odin says everything passed, i tried flashing the big main file, tried flashing them in each box at the same time, even tried it with the pit file, tried flashing with odin 3.9 and 3.10.7. same result odin says passed still cant access recovery or os. any help would be greatly appreciated. thanks
Open Odin, uncheck everything except f reset time, flash rom. When you see reset on the statutes window, remove USB cable from the phone, remove battery, wait 5 seconds, replace battery, boot directly into recovery, perform a factory wipe, reboot.
does it matter what version i flash? since im not really sure what version it had prior?
I can't figure out how to upload a photo I have xda 4.0, and can't post outside links yet. Anyway
It says
Product name:N900A
Current binary: Samsung official
System status official
Knox void status 0x0
Qualcomm Secureboot enabled(csb)
Ap swrev s2 t2 a2 a3 p2
Secure download enable
Udc start
Hope that helps
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
ghost5825 said:
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
Click to expand...
Click to collapse
You should probably ask her if she had Lollipop. If she did then that narrows it down to OC1 or OC2.
She doesn't know, not very phone literate as far as software, any ideas? I read in another thread to flash a modified version of nc2 but can't seem to find that version, this is the thread http://forum.xda-developers.com/showthread.php?t=2703006
Don't know if I can't find it, kinda confusing as far as what I need, like I said I've tried everything except oc2 cant find a link I've tried googling, and that thread says Odin files but can't find a full one for oc2, there's ones for safestrap but can't find Odin