Database Develop

Help me please...galaxy tab Exclamation mark

i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....

water30 said:
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
Click to expand...
Click to collapse
what did you do to get to this screen? Is this after or before you upgraded firmware?

GANJDROID said:
what did you do to get to this screen? Is this after or before you upgraded firmware?
Click to expand...
Click to collapse
after upgrade firmware odin show reset but the my tab not reset then i just manual reset (i can take this method for my galaxys ) after that.....

Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again

i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?

primeroz said:
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
Click to expand...
Click to collapse
Read my above post. Go into download mode (volume down + home + power) you'll still have the same image but the phone WILL be in download mode. Then flash your previous firmware and you're sorted.
Sent from my GT-P1000

You probably got that by messing with the kernel. Fund the zImage from the firmware, extract it with a .tar extractor then use something like heimdall to flash the kernel and it should work.
Sent from my GT-P1000 using Tapatalk

Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.

Help please
slaia said:
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Click to expand...
Click to collapse
Having the same problem too... anyone can help?

If you see Phone-!-Pc on the Tab screen it is the download mode.
You can reflash it using Odin, however, you will need to do full Rom flash. I had similar problem and solved it by replashing.
I followed the latest guide published in this forum and Roto-JME rom with reformatting of internal sd.

Phone ! PC error FML!!!
GANJDROID said:
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
Click to expand...
Click to collapse
Where can i download the JM6 zip??

Hey guys,
I tried to manually update my tab to Gingerbread today via Odin, but it kept hanging on select partition (I discovered I used the wrong PIT for the firmware I was going to flash, but as I didn't select the firmware yet that shouldn't be a problem). At last I decided to quit Odin (which might have been stupid...) and try it again. Then it kept haning even earlier, so I tried to restart the device in download mode. However, whatever I try it keeps giving the Phone ! PC sign. If I try to just boot, if I try to go into recovery mode or if I try to go into download mode. I saw a lot of possible ways to solve the problem, but my PC doesn't recognize the tab anymore. If I connect it, it does give the "usb device connected" sound, but there is a popup which sais "USB Device not recognized. One of the USB Devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message". I already tried to reinstall the driver but it doesn't work. Also Odin and Heimdall don't detect any device.
Does anyone know a solution for this problem? Maybe taking the battery out? (for which I have to buy a new triangle screwdriver, so I need to know if it could possibly work first. It takes some weeks to order such a thing I think...)
EDIT: I played around a bit with the drivers again, and suddenly both Heimdall and Odin recognized it. However Odin stopped recognizing it again. Then I pressed "read PIT" in Heimdall, which worked. After that the device started booting up to the Samsung logo animation and then powered off again. Now it doesn't do anything anymore, not even showing the Phone ! PC screen. I'll charge it overnight (maybe it's gone empty during the process), so I hope that helps.....

In some strange way, the phone works again..... So never mind my post above.

[Q] Captivate Stuck in Boot Loop

I updated my rooted Captivate from Froyo (official build) to Gingerbread 2.3.5 (official build) today, and the process seemed to go smoothly until the phone needed to reboot at the end of the update. I found that my phone was showing the At&t animation and then going to the Galaxy S animation and then repeating the process instead of booting properly. I do not know why because I unrooted my phone using Super One Click before I updated. I am freaking out, what should I do now?

how did you update? what method? official stock? or official plus a CWM kernel?
there was no point of un-rooting. flashing stock will un-root a captivate. flashing a custom rom, it will be rooted already...
when in doubt, flash to stock again. but make sure its correct stock.. once again what method and where did you get it?

TRusselo said:
how did you update? what method? official stock? or official plus a CWM kernel?
there was no point of un-rooting. flashing stock will un-root a captivate. flashing a custom rom, it will be rooted already...
when in doubt, flash to stock again. but make sure its correct stock.. once again what method and where did you get it?
Click to expand...
Click to collapse
I updated (from official Froyo stock) using Kies Mini to the Samsung official stock (Gingerbread 2.3.5). I have never flashed before. How can I do this and how can I find the correct stock to flash to?

As a note to anyone who might find themselves stuck in the same predicament as I was in, the Odin3 One Click Downloader program by "designgears" is very useful. Using the button combinations I found here: http://forum.xda-developers.com/showthread.php?t=1351224 I was able to get my phone into Download Mode. I then used the Odin3 program (http://forum.xda-developers.com/showthread.php?t=731989) to painlessly flash my phone to the stock 2.1 rom. This was just a matter of connecting my phone to my computer, running Odin3, and clicking "start". After my phone rebooted, using Kies Mini, I updated to 2.2 Froyo. I waited for my phone to reboot, disconnected it from the computer, reconnected it to the computer and then (using Kies Mini again) updated my phone to Gingerbread 2.3.5 (which, so far, I am very happy with).
WARNING: Make sure you wait before Odin3 is completely done running!! When I was running the program I thought it was finished and almost unplugged my phone prematurely (I am fairly sure this would have ruined my phone, but do not quote me on this). If in doubt, just wait a few minutes.

captivateman111 said:
Will this Odin3 One Click Downloader by Designgears fix my problem?
Link: http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
Just flash a KK4 rom or leaked KK4 in dev section. Should fix it. BTW never use kies....its ebil....

I'm having a similar problem, with my Captivate stuck in a loop at the AT&T splash screen. However, I can't access Recovery mode or get to download mode - I've tried every 3-button combo variant I've found on the forums, as well as taking out the battery, holding the volume +/- keys, plugging into USB & re-inserting the battery.
Would it be safe to assume that the only way I'm going to be able to get into download mode now is with a USB jig?
EDIT: Prior to this, I was running Froyo 2.2 - went to flash the ICS for Captivate ROM - it didn't work, but I could still get into recovery mode. So I simply booted into recovery, did a factory reset and clicked the "reboot" option on CWM. That's when it started boot looping.

Okay, so I got a USB jig and put it into download mode. Plugged it into a free rear USB port and Vista started automatically installing drivers for it, so I ran the Heimdall One-Click Stock. It saw my device as connected so I went ahead and clicked "flash", and I got an error msg saying the device wasn't found. Prompted me to install drivers, so I followed the prompts and attempted to install the drivers from the zadig program.
The first time, the install timed out after 5 minutes. Rebooted my PC and ran the Heimdall One-Click utility again, and this time after a few seconds I got a prompt saying that the drivers have been successfully installed. However, in the taskbar I got a pop-up saying that driver installation failed.
Now, every time I plug into a USB port I get an error of "USB device not recognized", and when I run the Heimdall One-Click util it says my device isn't connected. I've tried it on two seperate PCs (both running Vista), on multiple USB ports and still get the same error.
Should I just uninstall all the Samsung drivers and reinstall?
EDIT FOR FUTURE REFERENCE: Hi! If you're reading this, you may've had the same problem. What worked for me was uninstalling Samsung Kies, uninstalling the Samsung mobile phone drivers, going into regedit and deleting all SAMSUNG registry keys. After that, reboot, put your device into download mode, plug into your USB Port, run the Heimdall One-Click package of your choice and just wait!

Malheurit said:
Okay, so I got a USB jig and put it into download mode. Plugged it into a free rear USB port and Vista started automatically installing drivers for it, so I ran the Heimdall One-Click Stock. It saw my device as connected so I went ahead and clicked "flash", and I got an error msg saying the device wasn't found. Prompted me to install drivers, so I followed the prompts and attempted to install the drivers from the zadig program.
The first time, the install timed out after 5 minutes. Rebooted my PC and ran the Heimdall One-Click utility again, and this time after a few seconds I got a prompt saying that the drivers have been successfully installed. However, in the taskbar I got a pop-up saying that driver installation failed.
Now, every time I plug into a USB port I get an error of "USB device not recognized", and when I run the Heimdall One-Click util it says my device isn't connected. I've tried it on two seperate PCs (both running Vista), on multiple USB ports and still get the same error.
Should I just uninstall all the Samsung drivers and reinstall?
Click to expand...
Click to collapse
You can't go wrong by uninstalling both sets of drivers (Samsung and Heimdall), rebooting, and reinstalling just the Heimdall Drivers. Heimdall also only installs drivers for one USB port, so trying different ports is key (I know you already did, and you're on the right track).
Here's a good Heimdall thread if you need it: http://forum.xda-developers.com/showthread.php?t=1113195

Download jig will save you
Sent from my SPH-D710 using XDA App

I had the exact same problem....Kies info said to wait til I got to idle screen before unplugging usb. No dice. Infinte loop. Got into recovery and did a factory reset and BINGO...Gingerbread...yum!

ok so i used kies to upgrade to gb then used odin to flash a rom problem os i guess it was t mobile rom so when booting up i see a att screen then gets stuck on galaxys 4g t mobile screen still have cmw in red but cannot read anything or mount tried flashing from cmw no luck there tried one click to stock no luck so any help would be awesome thanks

noobin said:
ok so i used kies to upgrade to gb then used odin to flash a rom problem os i guess it was t mobile rom so when booting up i see a att screen then gets stuck on galaxys 4g t mobile screen still have cmw in red but cannot read anything or mount tried flashing from cmw no luck there tried one click to stock no luck so any help would be awesome thanks
Click to expand...
Click to collapse
Wait you have a Captivate running a Tmo 4g variant rom?
Sent from my ICS powered Captivate using Tapatalk

How?
russhayden said:
I had the exact same problem....Kies info said to wait til I got to idle screen before unplugging usb. No dice. Infinte loop. Got into recovery and did a factory reset and BINGO...Gingerbread...yum!
Click to expand...
Click to collapse
I'm in the boot loop too. How did you get into recovery?

^
Hold volume + & - and power button until phone boots and u see the at&t screen Then release buttons.
Sent from my SAMSUNG-SGH-I777 using xda premium

Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai

Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone

PSYCHOBOY18 said:
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
Click to expand...
Click to collapse
what have you tried to do to fix this already?

ICS Bad Idea!!!
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......

Sorry guys wrong post this is for Samsung captivate glide! , my mistake..
Sent from my SAMSUNG-SGH-I927R using xda premium

Firmware upgrade encountered an issue. Please select recovery in Kies and try again
This is for Samsung Galaxy Note 2 (Sprint SPH-L900) Is the website for the stock rom
rwilco12.com
stock rom: [ROM][ODIN][TAR]SPH-L900 MA7 (MA7 Modem/Kernel/ROM - Stock
Odin 3 v 1.85 (You Can Google and find it)
ok sweet so I have done this successfully. i really believe you should put this on ur first post so people dont have to do searching and can feel at ease.
1. Start ODIN 3v1.85
2. Enter Download Mode
a. Power the phone off.
b. Plug the usb cable into the computer (not the phone)
c. Hold both sides of the volume rocker down (vol up + vol down)
d. While holding those buttons down, insert the usb cable into your phone.
It may take a second or two for the screen to display with a warning. Press the Volume UP key to download a custom ROM.
3. In ODIN, click PDA and select the PDA.tar file you extracted
4. DO NOT check re-partition, Flash Lock, Phone EFS Clear, Phone bootloader update
5. CHECK Auto Reboot and F.Reset Time
6. Click Start
At the end of the process ODIN's first block will show up as YELLOW with the words PASS and your phone will reboot.
Unplug USB from your phone after first boot.
It worked for me perfectly you don't have to F.Reset

Perhaps you should try the Note 2 forums for a more informative response?

I have the same problem with my tmobile galaxy s ii, T989
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and whenever I start installing a stock room using Odin 1.85 it force close and the phone stays in the same page saying
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
Please help!

Tried everything I know and still not working
I tried two computers and everytime I start odin it forces stop
The screen is still in Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and I guess this is the download mode because I restarted it with volume up and down and pluged the usb and it turns to this screen
I downloaded odin again to make sure it runs ok and also tried it in my wifes phone and it runs with no problem
It is one of two cases, ether the phone is completely dead or the files I am using to be installed are not the correct ones
I tried the files on this post:
http://forum.xda-developers.com/showthread.php?t=1414341
Please tell me what to do
I really need the phone...

Need Help, Bricked SM-T900

I bricked my SM-T900 Wifi while attempting to root it. Can anyone help me get it un-bricked?
Here's a step by step list of what I did and what happened:
1. Turned on USB debugging mode
2. Downloaded and installed Samsung kies
3. Downloaded the file for SM-T900 from autoroot [dot] chainfire [dot] eu/ (it won't let me post outside links)
4. Turn off tablet, get into custom firmware installation mode by holding power, volume-, and home, then confirm the warning
5. run Odin (v3.07, came in the zip file)
6. plug in tablet, tablet showed up as a com port but did NOT show any other information. I don't know if it was supposed to show anything else but I hadn't though about that at the time.
7. Clicked on PDA and selected the file CF-Auto-Root-v2wifi-v2wifixx-smt900.tar.md5
8. Clicked start
9. Waited, it said it was doing something with cache, I don't recall exactly what it said
10. after about 3 minutes the screen looked wrong, all the pixels were different colors, (rainbow static?)
11. Waited about 10 minutes just in case that was not a sign of failure, then Odin reported that it failed.
Now when I press the power button, I get the screen that says "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again"
I tried using that in Kies but Kies can't connect to my tablet any more. When I try to use Odin using the recovery with power, vol-, home, it detects that I plugged it in but when I try to click start it fails and nothing happens.

I have exact the same problem.
I have read many articles, who said it was easy to root.
That's not true !!!!.
Maybe because the tablet became an update today ?
What I did to recover the tablet: (phew !!!)
Download this bootloader:
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
Connect to Odin and flash it.
A few seconds, it says OK, reboots and voila: there's your tablet again revived !!!!.

rumaro said:
I have exact the same problem.
I have read many articles, who said it was easy to root.
That's not true !!!!.
Maybe because the tablet became an update today ?
What I did to recover the tablet: (phew !!!)
Download this bootloader:
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
Connect to Odin and flash it.
A few seconds, it says OK, reboots and voila: there's your tablet again revived !!!!.
Click to expand...
Click to collapse
Unfortunately Odin fails before it manages to even connect to my tablet so I'm not sure it will work for me but I'll give it a try. It managed to connect before when I tried to flash the root files but now it fails every time. I'll update this when I get home and try flashing that.
Edit:
Got home, tried your fix. I am happy to report it worked and it only took a few seconds. Thanks!
Edit:
To anyone reading this thread, if you tried rooting your SM-T900 using the SM-T900 files for rooting, try using the SM-P900 files instead! I just tried that and it seems to be working fine.

I'm glad I could help. :good:
It's bad for your heart when you see that your expensive tablet is bricked.

Hello everyone. Where do I flash the bootloader in odin? Do I use PDA or Bootloader and do I need to check the bootloader update box? Just wanted to confirm before further messing up my tablet. Thanks!
Edit: Never mind, figured it out. Thanks for the help!

This method just worked for me. Flashed the bootloader with Odin after getting "stuck" and it booted right up.
Jim

sizedlemming65 said:
Hello everyone. Where do I flash the bootloader in odin? Do I use PDA or Bootloader and do I need to check the bootloader update box? Just wanted to confirm before further messing up my tablet. Thanks!
Edit: Never mind, figured it out. Thanks for the help!
Click to expand...
Click to collapse
What did you do exactly to fix it? I'm having the same issue. Just sits at screen and says:
ODIN MODE
Product Name: SM-T900
Current Binary: Custom
System Status: Official
KNOX Warranty Void: 1
RP SWREV: A1
How do you use that recovery.img file?

For the top most problem flash cwm or TWRP recovery through Odin or through recovery mode then boot into cwm or TWRP recovery delete all files and install a supported rom.
If u want full explained steps mail me
- [email protected]
Sent from my SM-J500F using XDA Forums

it's 2022 & my T900 finally went into bootloop in model logo, does anyone know the real reason for this? is it hardware or software problem?
- I can flash any version via odin but still bootloops
- TWRP worked once after that can't get in anymore
- the only button working is for the download mode PWR + Vol Down
- before all this LED Stayed on until batt drained then bootloops
it's a good tab to watch movie while on a treadmill

Firmware Upgrade fail Try using recovery mode i897! HELP!!!

Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!

ShahX said:
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
Click to expand...
Click to collapse
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).

BWolf56 said:
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
Click to expand...
Click to collapse
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.

ShahX said:
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
Click to expand...
Click to collapse
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.

Amazing Reply! but Still need help
BWolf56 said:
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Click to expand...
Click to collapse
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!

ShahX said:
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
Click to expand...
Click to collapse
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.

Almost Done
BWolf56 said:
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Click to expand...
Click to collapse
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help

ShahX said:
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
Click to expand...
Click to collapse
You can give Heimdall a shot (note that it will install its own drivers on the usb port you'll use it on so Odin won't work on it): http://www.mediafire.com/download/5..., NO Bootloaders, Wipe-Heimdall One-Click.zip
If that doesn't work, I can say at like 95% that your internal memory is dead and you'll have to partition an SD card if you wanna get it running. There are guides on how to do it on here.

I've seen that image often. Uninstalling then re-installing the usb drivers for Samsung helped me. Flashing a captivate can be a little convoluted granted all the different methods of acquiring root and flashing a rom that's been used through the years ... and subsequently posted somewhere on the internet. I'd suggest the following .... once your device is recognized in Odin.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed