Hello. Is anybody knows hot to safely downgrade from official 4.4 to 4.2? I mean with all working functions.
Sent from my GT-I9295 using XDA Premium 4 mobile app
6783 said:
Hello. Is anybody knows hot to safely downgrade from official 4.4 to 4.2? I mean with all working functions.
Sent from my GT-I9295 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi
If you've done a nandroid backup, flash it.
If no backup, you can safely flash with odin a 4.2 ROM from sammobile.
Done the both because of some problems with kitkat and worked fine even if I'm on kitkat now with everything working fine.
terisse said:
Hi
If you've done a nandroid backup, flash it.
If no backup, you can safely flash with odin a 4.2 ROM from sammobile.
Done the both because of some problems with kitkat and worked fine even if I'm on kitkat now with everything working fine.
Click to expand...
Click to collapse
I was wondering the same thing myself cause i tried several times with different Stock ROM's without any success??
When you are trid to flash it comes up with some kind off authenication error (The only ROM i able to flash is the 4.4.)
And i am not even able to Root without getting stuck during boot. Tried several senarios.
CF-Root causes boot lock
T
ried Also : recovery_6.0.4.7.tar.md5
Then i get this Warning: kernel is not seandroid enforcing
Status for SE for Android:
Enforcing + type details
Build no:
KOT49H.I9295XXUCNE4
I read somewhere that a Stock ROM with modified files could do the trick:
http://forum.xda-developers.com/showthread.php?t=2715435
Maybe such a ROM would do the trick? Maybe someone else has done this work already.
i hope so - cause It kinda sucks running a Stock ROM
revert to 4.2.2
hello,
i have a GT-I9295
i have updated from 4.2.2 to 4.4.2 PDA: I9295XXUCNH2 released 7 aug. via odin 3.09
had to do a factory reset to get wifi working, etc..
i then wanted to revert back to 4.2, but i couldn't, and still can't... i did the following:
- flash with odin the 4.2 from sammobile: error: NAND Write Start!!.....<ID:0/004> Complete(Write) operation failed. soft brik, Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
- tried to reflash the 4.4 firmware i already had with odin...same error.
- couldnt boot the phone again untill i flashed cwm 6.0.5.0
- installed carbon rom from cwm no problem. did reset, wipe cahe, format system, etc. i now have the not seandroid enforcing message when booting and entering recovery, but everything works.
- tried to flash again with odin the 4.2 official, still no luck. same error right after nand write.
i remember downgrading from 4.4 PDA: I9295XXUCNE4 to 4.2 PDA: I9295XXUBML3 with no problems a while back on my other i9295 via odin.
is the bootloader different in this version of 4.4 i flashed than the one i flashed a while back?
the weird thing is that i get the same write failure with reflashing 4.4 with odin.
any thoughts?
thank you
Small update. You will not be able to downgrade from next after ne5 versions of KitKat.
Sent from my GT-I9295 using XDA Premium 4 mobile app
I have a similar issue trying to downgrade to 4.2.2 jellybean. anyone kind enough to help?
ambyy said:
I have a similar issue trying to downgrade to 4.2.2 jellybean. anyone kind enough to help?
Click to expand...
Click to collapse
Just want to know if downgrading to 4.2.2 is possible or it's a wild goose chase. Please someone help.
Related
I'm now starting to bang my head against the wall. I ave just bought an Orange locked I9305 which I only wanted to unlock to use on another network. Unfortunately I couldn't unlock it as it came with 4.1.2. I read that I had to downgrade to 4.1.1 which is where the problems started. I followed the instructions at the start of this post and made a backup of my IMEI / NV Data which went well. I then installed Odin and tried to install
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALI5
PHONE: BVALI5
CSC: EVRALI5
Released: 17/09/2012
from the Pre-Rooted / Original Stock Odin Packages! thread.
I thought this had gone well but it got stuck rebooting at the Samsung screen after the start up swirling screen for at least an hour. I then tried to install the
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALK3
PHONE: XXALK2
CSC: EVRALI5
This also got stuck and after another hour I tried to install a stock rom from http://samsung-updates.com/ which was I9305XXALI5_I9305EVRALI5_I9305BVALI5_HOME.tar.md5
This worked and it installed 4.1.1 but when I went to unlock the phone it didn't have any of the menus and when I checked the IMEI it said null / null.
I then though that this isn't too bad as I can just restore the IMEI but when I tried to connect through QPST it sees the port (Com3) but cannot see the phone so I cannot do the restore.
I have tried re-installing QPST after deleting anything in the registry that mentions it, I have re-installed the samsung drivers, I have flashed Param_Bin_I9305.tar.md5 with odin, have rooted properly as there was no superuser app with both busybox and I9305 clockwork mod. These worked ok as I was able to install triangle away and use it and have supersu in my apps.
Does anyone have a clue as to what I can try next as thinking of going back to HTC as I have had there phones since windows and never had a problem rooting and unlocking them
Just a thought I have looked at the box and it says the phone is I9305 PM will this make a difference
gordy1 said:
I'm now starting to bang my head against the wall. I ave just bought an Orange locked I9305 which I only wanted to unlock to use on another network. Unfortunately I couldn't unlock it as it came with 4.1.2. I read that I had to downgrade to 4.1.1 which is where the problems started. I followed the instructions at the start of this post and made a backup of my IMEI / NV Data which went well. I then installed Odin and tried to install
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALI5
PHONE: BVALI5
CSC: EVRALI5
Released: 17/09/2012
from the Pre-Rooted / Original Stock Odin Packages! thread.
I thought this had gone well but it got stuck rebooting at the Samsung screen after the start up swirling screen for at least an hour. I then tried to install the
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALK3
PHONE: XXALK2
CSC: EVRALI5
This also got stuck and after another hour I tried to install a stock rom from http://samsung-updates.com/ which was I9305XXALI5_I9305EVRALI5_I9305BVALI5_HOME.tar.md5
This worked and it installed 4.1.1 but when I went to unlock the phone it didn't have any of the menus and when I checked the IMEI it said null / null.
I then though that this isn't too bad as I can just restore the IMEI but when I tried to connect through QPST it sees the port (Com3) but cannot see the phone so I cannot do the restore.
I have tried re-installing QPST after deleting anything in the registry that mentions it, I have re-installed the samsung drivers, I have flashed Param_Bin_I9305.tar.md5 with odin, have rooted properly as there was no superuser app with both busybox and I9305 clockwork mod. These worked ok as I was able to install triangle away and use it and have supersu in my apps.
Does anyone have a clue as to what I can try next as thinking of going back to HTC as I have had there phones since windows and never had a problem rooting and unlocking them
Just a thought I have looked at the box and it says the phone is I9305 PM will this make a difference
Click to expand...
Click to collapse
After the initial downgrade all you had to do was reset to factory settings to make it boot again (recovery mode). I would suggest installing the ROM that came with the phone to see if it magically springs back to life.
Restoring back ime
I had the same problem yesterday, but luckily for me i restore back my IME by flashing the paraffin with odin. But the rom on it as at the time when i lost my IME was warmalite. Try the warmalite and then the paraffin this might help.
Thanks guys,
I finally sorted it as it must be a problem with the Pre-Rooted / Original Stock Odin Packages. I finally got it to work by flashing a different kernel, I then unlocked the phone to any network and flashed a 4.1.2 Pre-Rooted / Original Stock Odin Package where it lost all its IMEI again. Flashed a new kernel and all working as I wanted it too as it's now unlocked on 4.1.2.
gordy1 said:
Thanks guys,
I finally sorted it as it must be a problem with the Pre-Rooted / Original Stock Odin Packages. I finally got it to work by flashing a different kernel, I then unlocked the phone to any network and flashed a 4.1.2 Pre-Rooted / Original Stock Odin Package where it lost all its IMEI again. Flashed a new kernel and all working as I wanted it too as it's now unlocked on 4.1.2.
Click to expand...
Click to collapse
Is this new kernel you are flashing the Perseus kernel by any chance?
Rekoil said:
Is this new kernel you are flashing the Perseus kernel by any chance?
Click to expand...
Click to collapse
Yes that's the one I used why does it make a difference?
gordy1 said:
Yes that's the one I used why does it make a difference?
Click to expand...
Click to collapse
The difference is, if I am correct, you are no longer able to use any other kernel. Stock kernels, as well as CyanogenMod or other AOSP-based kernels will no longer properly set up your modem for you, you will need to always run Samsung-based ROMs with a Perseus kernel.
The same is happening with my device, and I have seen a few others as well.
Rekoil said:
The difference is, if I am correct, you are no longer able to use any other kernel. Stock kernels, as well as CyanogenMod or other AOSP-based kernels will no longer properly set up your modem for you, you will need to always run Samsung-based ROMs with a Perseus kernel.
The same is happening with my device, and I have seen a few others as well.
Click to expand...
Click to collapse
Oh well at least the phone is working now where as before I couldn't even restore my IMEI, Just got to hope the phone doesn't break then as I don't think I would be able to send it back with that kernel
Rekoil said:
The difference is, if I am correct, you are no longer able to use any other kernel. Stock kernels, as well as CyanogenMod or other AOSP-based kernels will no longer properly set up your modem for you, you will need to always run Samsung-based ROMs with a Perseus kernel.
The same is happening with my device, and I have seen a few others as well.
Click to expand...
Click to collapse
Right! It happens with my device as well.
I recently tried Adam Kernel which you can download using the Update Me App in Ripper ROM and it worked, my phone worked. So right now you can either use Perseus Kernel which is really good or use Adam Kernel which is far close to the stock one. That kernel isn't in a thread, you have to install Ripper ROM and then download it through the Update Me App if you want to use it.
I just wanted to point that out
Sent from my GT-I9305 using xda premium
jjpro45 said:
Right! It happens with my device as well.
I recently tried Adam Kernel which you can download using the Update Me App in Ripper ROM and it worked, my phone worked. So right now you can either use Perseus Kernel which is really good or use Adam Kernel which is far close to the stock one. That kernel isn't in a thread, you have to install Ripper ROM and then download it through the Update Me App if you want to use it.
I just wanted to point that out
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Good to know, thanks!
I've tried uninstalling superuser and all it has. I've tried like 5 times now the install for the new firmware update won't install i keep getting a android with the red exclamation sign and its front door open, then it boots in to android and says update failed. Help please!
Do I have to factory restore first or somthing? i really dont wanna have to cause i just got this phone from at&t as a referb for my old one that had battery issues and its not fun setting everything up over again lol
\
Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?
mauchito said:
Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?
Click to expand...
Click to collapse
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted
djshadowxm81 said:
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted
Click to expand...
Click to collapse
Got it. Check this thread: http://forum.xda-developers.com/showthread.php?t=2751263
You may find all the information you need there. Even if you can't, don't worry, is just a minor update, it is not Kitkat.
I've already been through that thread and haven't really found my solution to my issue. Any ideas?
djshadowxm81 said:
I've already been through that thread and haven't really found my solution to my issue. Any ideas?
Click to expand...
Click to collapse
Sadly no, my friend. Any reason in particular about why you want this specific update?
Let's hope somebody else in this forum can help you.
Are you running a stock recovery? Have you tried using Myth Tools to flash back to stock?
Its running stock rom from factory everything is factory right now
I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.
audit13 said:
I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.
Click to expand...
Click to collapse
I am on 4.1.1 from the factory. This is a referb phone from the factory like not even a week old yet. Boot loader isn't even unlocked. Its all stock and I'm getting dead android.
If you're getting the dead Android, it makes me believe that something may be wrong with the stock recovery. Some people were able to get the update to install using the latest Philz Touch recovery rather than stock recovery.
This might help from Skeevy: http://forum.xda-developers.com/showpost.php?p=52745043&postcount=7
Hi all,
Forgive me if this has been posted before but i've been searching for a couple of days and tried things out but no success.
Background...
I have an S3 I9305 on stock 4.3 and have been trying to get the Wifi working on it using the simple methods but no luck so...
I tried to flash stock 4.1.2 but that did not work as Odin fails on the start saying "Failed" when flashing sbin. I then tried flashing 4.4.4 and that worked but that did not fix Wifi.
I now want to return it to stock 4.3 and have the flash and Knox counters reset because I want to return it as it's still under warranty. Is this possible?
I rooted the phone using Philz and can flash stock 4.3 using Mobile Odin but the flash and Knox counters do not get reset and when I tried to flash stock 4.3 using Odin it fails with the same error even though it is technically on 4.3.
Odin Version used: 3.07 and 3.09
Phils kernel used: philz_touch_6.26.6-i9305
Roms Used:
* I9305XXUEML8_I9305OLBEML6_XSP - 4.3
* I9305XXUFNI3_I9305DBTFNI3_DBT - 4.4.4
Please can anyone answer am I screwed or is there a way to go back?
Also, if I cannot return it to Stock what are my options in terms of using a custom ROM with 100% working Wifi?
To the extent of my knowledge, it is still not possible to reset the Knox counter, if it has been triggered.
If i cannot go back to stock what are my options in terms of a stable custom Rom with a working wifi?
I am not looking for features, i just want it all working again :'(
Thank you.
Someone please help.
If your Wifi does not work with the factory image, then a custom is not very likely to fix it. (I have never had Wifi issues with any of the ROMS I have tried)
Even if your Knox counter is triggered, it may be worth trying to take it back for RMA.
depending on where you bought it, they may not know anything about Knox or care.
cenonmin said:
Hi all,
Forgive me if this has been posted before but i've been searching for a couple of days and tried things out but no success.
Background...
I have an S3 I9305 on stock 4.3 and have been trying to get the Wifi working on it using the simple methods but no luck so...
I tried to flash stock 4.1.2 but that did not work as Odin fails on the start saying "Failed" when flashing sbin. I then tried flashing 4.4.4 and that worked but that did not fix Wifi.
I now want to return it to stock 4.3 and have the flash and Knox counters reset because I want to return it as it's still under warranty. Is this possible?
I rooted the phone using Philz and can flash stock 4.3 using Mobile Odin but the flash and Knox counters do not get reset and when I tried to flash stock 4.3 using Odin it fails with the same error even though it is technically on 4.3.
Odin Version used: 3.07 and 3.09
Phils kernel used: philz_touch_6.26.6-i9305
Roms Used:
* I9305XXUEML8_I9305OLBEML6_XSP - 4.3
* I9305XXUFNI3_I9305DBTFNI3_DBT - 4.4.4
Please can anyone answer am I screwed or is there a way to go back?
Also, if I cannot return it to Stock what are my options in terms of using a custom ROM with 100% working Wifi?
Click to expand...
Click to collapse
Is clear that the problem is hardware environment. Take it to get it fixed.
On the other hand the only way to make a downgrade is flashing the firmware recovery. http://www.htcmania.com/showthread.php?t=738977
Thank you for all the feedback I will try and RMA it. I will need luck as I bought it from Kogan
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.
thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.
I'd like to downgrade from a stock Samsung 5.0.1 ROM to a stock Samsung 4.2.2 ROM.
The installed 5.0.1 ROM is
I9295XXUDOB4_I9295BTUDOB1_I9295XXUDOB4_HOME.tar. Also installed is CF-Auto-Root-jactivelte and CWM.
When I tried to downgrade the above installation to 4.2.2, using CWM I did a factory wipe, cleared cache, formatted /system then tried Odin v3.07 with the 4.2.2 ROM I9295XXUAMF5_I9295OXXAMF4_BTU,
w/”Auto Reboot”” and “F. Reset Time” checked.
The error message that follows,
"Aboot.mbn"
is,
"FAIL! (Auth)"
with the device stuck at start of “Downloading…Do not turn off target!!”
It appears that Papa Samsung does not want us downgrading the ROMS on our phones. Is there any way around this?
I guess you could trough odin but that would overwrite to stock recovery .. but why reverting to 4.2 isnt kit ket much better solution? tbh i dont know i got phone on kit ket and upgraded to lolipop which i didnt like at all and downgraded to kit ket ...
zrhtemplar said:
I guess you could trough odin but that would overwrite to stock recovery .. but why reverting to 4.2 isnt kit ket much better solution? tbh i dont know i got phone on kit ket and upgraded to lolipop which i didnt like at all and downgraded to kit ket ...
Click to expand...
Click to collapse
Can you elaborate on the process using Odin? Thanks.