Hi,
I've been reading all the post about OTA update, but I couldn't find a clear answer to my question.
I have an XT1053 Dev Edition with 4.4.2 running.
I've unlocked the bootloader and changed firmware to 4.4.2 European version (Blur_Version.161.44.16.ghost_row.Retail.en.EU) through RSD Lite to have italian language on it.
Then I've flashed T-mobile modem to have a better signal.
The phone is not rooted.
When I'll receive the OTA update to 4.4.3, will it be safe to accept it?
Thanks in advance to any reply!!
luxpast said:
Hi,
I've been reading all the post about OTA update, but I couldn't find a clear answer to my question.
I have an XT1053 Dev Edition with 4.4.2 running.
I've unlocked the bootloader and changed firmware to 4.4.2 European version (Blur_Version.161.44.16.ghost_row.Retail.en.EU) through RSD Lite to have italian language on it.
Then I've flashed T-mobile modem to have a better signal.
The phone is not rooted.
When I'll receive the OTA update to 4.4.3, will it be safe to accept it?
Thanks in advance to any reply!!
Click to expand...
Click to collapse
It should be Ok, the worst thing that will happen is that the OTA will fail and then you will know you may need to return back to stock4.4.2.
Related
Hello All
I'm new with this phone and I want to update it to 4.4, currently is running 4.3 but until now I can find a way to flash the 4.4 rom, maybe my bootloader is locked because odin don't let me flash it, also i'm looking for a debranded version
Regards
ViciousCC said:
Hello All
I'm new with this phone and I want to update it to 4.4, currently is running 4.3 but until now I can find a way to flash the 4.4 rom, maybe my bootloader is locked because odin don't let me flash it, also i'm looking for a debranded version
Regards
Click to expand...
Click to collapse
Your bootloader is locked, I'm guessing you're on UBUBML3 firmware. The only way you can update (or install any other firmware for that matter) is to get official firmware for your pone that has been signed by Samsung. The AT&T 4.4.2 update will not work on your phone unfortunately, so you're going to have to get the update directly from Telcel.
Devo7v said:
Your bootloader is locked, I'm guessing you're on UBUBML3 firmware. The only way you can update (or install any other firmware for that matter) is to get official firmware for your pone that has been signed by Samsung. The AT&T 4.4.2 update will not work on your phone unfortunately, so you're going to have to get the update directly from Telcel.
Click to expand...
Click to collapse
Damn.... well thanks for your answer
Telcel over AT&T
Devo7v said:
Your bootloader is locked, I'm guessing you're on UBUBML3 firmware. The only way you can update (or install any other firmware for that matter) is to get official firmware for your pone that has been signed by Samsung. The AT&T 4.4.2 update will not work on your phone unfortunately, so you're going to have to get the update directly from Telcel.
Click to expand...
Click to collapse
Is it possible to flash stock Telcel ROM over AT&T ROM?
gino1974 said:
Is it possible to flash stock Telcel ROM over AT&T ROM?
Click to expand...
Click to collapse
No
Can anyone tell me if there is a specific kernel that needs to be flashed along with custom roms when running on Mexican carrier Telcel??
I have a question:
my carrier is claro Colombia with android version 4.4.2, and I have open bootloader and I am root, my question is if I can pass from claro Colombia firmware 4.4.2 to 4.4.4 retail brasil firmware for without problems ??
My moto x is XT1058
If your bootloader is unlocked, there's no reason to worry about losing root. All you have to do is flash the latest su.zip file in recovery.
kayserxx said:
I have a question:
my carrier is claro Colombia with android version 4.4.2, and I have open bootloader and I am root, my question is if I can pass from claro Colombia firmware 4.4.2 to 4.4.4 retail brasil firmware for without problems ??
My moto x is XT1058
Click to expand...
Click to collapse
If you are talking about flashing a Claro Branded XT1058 running 4.4.2 with the rom from Brazil 4.4.4 rom for an XT1058, in theory, yes, it should be possible, especially since they are both XT1058 and you are bootloader unlocked.
Keep in mind, once on 4.4.4, you can NOT return to 4.4.2 safely. So if you run into issues, make sure you have the Claro XT1058 4.4.4 SBF to flash back to.
Hi, I hope this isnt a dumb question but I've searched and can find an answer. I have an unlocked att s5 running on tmobile network and want to know how I can update from 4.4.2 to 4.4.4 i have checked the software update on the phone and it says Up to date. I have also tried Kies3 and it says the same. My question is how do I update to 4.4.4. do i need a att sim card?
mickey1999 said:
Hi, I hope this isnt a dumb question but I've searched and can find an answer. I have an unlocked att s5 running on tmobile network and want to know how I can update from 4.4.2 to 4.4.4 i have checked the software update on the phone and it says Up to date. I have also tried Kies3 and it says the same. My question is how do I update to 4.4.4. do i need a att sim card?
Click to expand...
Click to collapse
I believe this thread will be helpful. http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
I am staying on 4.4.2 until 5.0 comes out but I would assume since its still the g900A you will always have to keep up with the AT&T updates like this since you can't take an OTA.
Hello I need to update only the boot loader as I am on Tmobile now and use safestrap. I would like to put a tmo lollipop ROM on my phone but the boot loader is 4.4.2 and my baseband is G900AUCU1ANCE . any help would be great. I no longer have att so I can't do an ota update to fix this
Thanks
Just use the muniz_ri upgrade thread. Regardless of what service you use you have an att model and is only compatible with att software, you can run other model's roms(im running a tmo lollipop rom now) just as long as it doesnt use incompatible firmware.
Sent from my SM-G900A using Tapatalk
hi! update marshmallow finish on my moto g2 xt1064 but install failed update unsuccessful and rebbot on 5.0.2 help pls beginner user.
kapitenio said:
hi! update marshmallow finish on my moto g2 xt1064 but install failed update unsuccessful and rebbot on 5.0.2 help pls beginner user.
Click to expand...
Click to collapse
You should give more information if you want someone to help you.
Was it the official ota you received on your phone that you tried to update from or a captured one?
Is your bootloader locked /unlocked?
Is your phone rooted?
Which firmware you are on?
What exactly happened during the update process?
Wolfcity said:
You should give more information if you want someone to help you.
Was it the official ota you received on your phone that you tried to update from or a captured one?
Is your bootloader locked /unlocked?
Is your phone rooted?
Which firmware you are on?
What exactly happened during the update process?
Click to expand...
Click to collapse
It's marshmallow 6 official from update regular
Bootloader unlock
No rooted
Firmware lollipop 5.0.2 only official from update phone
Downloading fw OK but installing failed and show me
Update unsuccessful after boot yourself
I'm sorry bad englesh
kapitenio said:
It's marshmallow 6 official from update regular
Bootloader unlock
No rooted
Firmware lollipop 5.0.2 only official from update phone
Downloading fw OK but installing failed and show me
Update unsuccessful after boot yourself
I'm sorry bad englesh
Click to expand...
Click to collapse
Moto g2 xt1064 Us version
kapitenio said:
Moto g2 xt1064 Us version
Click to expand...
Click to collapse
Ok, did you get all further OTA including the stagefright patch? In your "About Phone" settings your firmware version should look something like XT1064 5.0.2 LXB22.99-24.12.
If you are on an earlier firmware you have to update your phone to the latest version, you can get it here: http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612 (Post #3 is for XT1064).
If you are on the latest firmware and OTA fails you can flash MM manually.
Check this thread: http://forum.xda-developers.com/moto-g-2014/general/6-0-xt1064-usa-ota-captured-t3327389/page2.
everything ok!thanks wolfcity
My phone updated OTA to 6.0; now it does not receive calls. I can make calls.
Resetting network settings did not help. I'm not able to restore the phone to factory; the option/button is grayed out.
I also cannot enable the USB debugging/developer mode...
coolchu168 said:
My phone updated OTA to 6.0; now it does not receive calls. I can make calls.
Resetting network settings did not help. I'm not able to restore the phone to factory; the option/button is grayed out.
I also cannot enable the USB debugging/developer mode...
Click to expand...
Click to collapse
Got it working. I was able to restore it via hardware/recovery.
followed the instructions and was able to upgrade to LXB22.99-24.4 however when i hit system update it says "your device is upto date". Is this because my device is rooted? How can i get 6.0 on my xt1064?