[Q] latest radio m7 international - One (M7) Q&A, Help & Troubleshooting

Can't find for sure, which is the latest radio for m7? Is it 4a.14.3250.13_10.33.1150.01l.?And if it's not which one is?

curious about this myself.
im looking for the newest Bell Mobility radio.

donibrasco said:
Can't find for sure, which is the latest radio for m7? Is it 4a.14.3250.13_10.33.1150.01l.?And if it's not which one is?
Click to expand...
Click to collapse
Latest radio is 4T.27.3218.14_10.37.1718.01L, latest firmware is 5.11.401.10, for international m7

So i need s-off?
My Hboot is1.44, can i s-off with firewater(think is the easiest way) or must use revon?

donibrasco said:
So i need s-off?
My Hboot is1.44, can i s-off with firewater(think is the easiest way) or must use revon?
Click to expand...
Click to collapse
Try firewater first, revone is outdated, but may work too. I s-off my phone, got lucky, I thought it didn't work. I can back after a smoke, and it said s-off, lol.

DeathAngel66669 said:
Try firewater first, revone is outdated, but may work too. I s-off my phone, got lucky, I thought it didn't work. I can back after a smoke, and it said s-off, lol.
Click to expand...
Click to collapse
Ok thanks, and what about the firmware, as far as i understand, if i like to upgrade my radios, must flush the firmware?

Once you have s-off and supercid(11111111) you can flash anything. But for now latest international is 5.11.401.10. This is the guide I used, it was very helpful
http://forum.xda-developers.com/showthread.php?t=2365506

DeathAngel66669 said:
Once you have s-off and supercid(11111111) you can flash anything. But for now latest international is 5.11.401.10. This is the guide I used, it was very helpful
http://forum.xda-developers.com/showthread.php?t=2365506
Click to expand...
Click to collapse
Ok, now i'm s-off by firewater, hboot 1.44 and folowed the steps vomer's guide, got supercid, but the next step (upgrade firmware) i did command flash firmware sent unknown error...
i'm on viperone 6.2.1 is this the issue?

when i push command: fastboot getvar all
in the end reports: getvar all failed status read failed
please help!

I did every steps vomer's guide and stuck on this error:
put the command fastboot flash zip c:\adb\firmware.zip
and shows this:
eror: cannot open firmware.zip
don't know whats going on:silly:
hboot 1.44, s-off, super cid(11111111)

up!

Must ask in a wright thread, please, any of you admins, could delete this thread!

Related

Can I install a Google Edition RUU in a HTC Developer Edition device?

I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
only if your s-off
Victor Potasso said:
I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
Click to expand...
Click to collapse
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
alray said:
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
Click to expand...
Click to collapse
Can I set my device to s-off?
Victor Potasso said:
Can I set my device to s-off?
Click to expand...
Click to collapse
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
First you need to be S-Off, this will NOT work with S-On!!!
A) If you’re on hboot 1.44 use revone to get S-Off: http://forum.xda-developers.com/show....php?t=2314582
B) If you’re on hboot 1.54/1.55 use rumrunner to get S-Off: http://rumrunner.us/ and http://forum.xda-developers.com/show....php?t=2487888
Click to expand...
Click to collapse
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
alray said:
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Victor Potasso said:
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Click to expand...
Click to collapse
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
alray said:
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
Click to expand...
Click to collapse
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Victor Potasso said:
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Click to expand...
Click to collapse
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
swag1981 said:
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
Click to expand...
Click to collapse
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Victor Potasso said:
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Click to expand...
Click to collapse
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
swag1981 said:
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
Click to expand...
Click to collapse
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Victor Potasso said:
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Click to expand...
Click to collapse
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
Cheers
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
:cheers:
Give this site a read over too when you get a chance http://www.htc1guru.com/downloads/
Sent from my HTC One using Tapatalk
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I just tried run this .exe but I got this error http://imgur.com/rYvIdBd
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe but my current ROM is Android 4.3 version 3.22.1540.1. I suppose I got this error because I tried to install a oldest version in my device. Does it make any ****ing sense?
I'm downloading the .exe for 3.22.1540.1 and than try to install it.
Regards
alray said:
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
Click to expand...
Click to collapse
Yep, my device has MID as PN0712000 and CID BS_US001
I tried run RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe from HTC1GURU byt i got this error http://imgur.com/rYvIdBd
My current software version is 3.22.1540.1.
@alray and @swag1981
I followed this thread http://forum.xda-developers.com/showthread.php?p=46046898
If I have a hboot S-ON it has to be LOCKED or RE-LOCKED. It'll never work with hboot UNLOCK. So if your hboot is S-OFF it not matter.
Thank u mates. You were friggin' awesome.
Regards

s-off, hboot 1.44 problem

Hi,
Here is the situation.. I have an HTC One..
the hboot is still on 1.44 with s-on.
I want to flash the latest firmware, which is only possible with s-off.. problem is that I'm running a 4.4.2 ROM and trying revone throws an error as the ROM doesn't match the hboot.
Is there anyway I can get s-off easily? or do I have to hunt down a 4.1.2 ROM and flash that before trying to update the firmware?
You can try firewater
I had the same situation, trying to S-OFF with HBOOT 1.44. I was able to get revone's method to work.
http://forum.xda-developers.com/showthread.php?t=2314582
The only issue I ran into is at step 4
4. Prepare to gain S-OFF by running the command: ./revone -P
Click to expand...
Click to collapse
It wouldn't work without root. I used firewater's temp root and it worked perfectly. I did not need my bootloader unlocked or my device rooted.
xJedix
BD619 said:
You can try firewater
Click to expand...
Click to collapse
firewater was the first one I tried cause I'm accustomed to using it with the 1.55 and 1.56 hboot..
didn't work on this run.. and revone keeps failing..
Thinking i'll relock the bootloader and flash the stock ruu with the latest firmware and see if that gets me up to hboot 1.56 and then unlock the bootloader and try firewater again..
any thoughts on this procedure before I try it?
Puff1911 said:
firewater was the first one I tried cause I'm accustomed to using it with the 1.55 and 1.56 hboot..
didn't work on this run.. and revone keeps failing..
Thinking i'll relock the bootloader and flash the stock ruu with the latest firmware and see if that gets me up to hboot 1.56 and then unlock the bootloader and try firewater again..
any thoughts on this procedure before I try it?
Click to expand...
Click to collapse
I would try a 4.1.2 rom before you wipe your device with the RUU.
BD619 said:
I would try a 4.1.2 rom before you wipe your device with the RUU.
Click to expand...
Click to collapse
catching a$$ to find a 4.1.2 rom though..
Puff1911 said:
catching a$$ to find a 4.1.2 rom though..
Click to expand...
Click to collapse
Stock rooted should be fine.
Thanks guys.. managed to find a copy of ARHD 9.4
gave a little trouble to flash.. but finally got through with it and revone s-off worked perfectly after that.
Thanks for the assistance.

Trying to go back to stock. Failing...

Hello everyone,
I've been trying to get back to stock on my Sprint HTC One. I have tried using the RUU in this thread: http://forum.xda-developers.com/showthread.php?t=2795856 and no luck. I am HBoot 1.55, S-ON, and running a stock rooted rom that is on 4.4.2
So here is what I tried. I relock my bootloader and proceed to run the RUU, but 2 times I get stuck on 4% so I have no luck. I tried getting S-Off and maybe that could help me bring back to stock, but that did not work either. Really need to get this phone back to Stock, any help is appreciate it, no one responded in that thread so I'm asking here. Thanks in advance.
You'll need to flash the Full Firmware first.
If it still gets stuck try a different USB Port...USB 2 work best or try a different PC.
BD619 said:
You'll need to flash the Full Firmware first.
If it still gets stuck try a different USB Port...USB 2 work best or try a different PC.
Click to expand...
Click to collapse
That is what the video at the bottom of the first post on that thread is about, correct?
Don't I have to be S-Off for that? It says on the video that I have to, and I am not.
PaoloMix09 said:
That is what the video at the bottom of the first post on that thread is about, correct?
Don't I have to be S-Off for that? It says on the video that I have to, and I am not.
Click to expand...
Click to collapse
Use This Firmware
You will need to re-lock your bootloader (fastboot oem lock)
Flash firmware (follow the video)
Run the RUU and you will be back to stock.
You do not need to be s-off to do either.
BD619 said:
Use This Firmware
You will need to re-lock your bootloader (fastboot oem lock)
Flash firmware (follow the video)
Run the RUU and you will be back to stock.
You do not need to be s-off to do either.
Click to expand...
Click to collapse
Trying to flash it but it won't . Fails checking signature. "Signature verify fail"
Sent from crispy tocino
PaoloMix09 said:
Trying to flash it but it won't . Fails checking signature. "Signature verify fail"
Sent from crispy tocino
Click to expand...
Click to collapse
Did you re-lock your bootloader?
Is the firmware in your adb/fastboot/platform tools folder?
BD619 said:
Did you re-lock your bootloader?
Is the firmware in your adb/fastboot/platform tools folder?
Click to expand...
Click to collapse
Yes sir. Relocked, only that at the top it says "security warning." I renamed the folder to firmware.zip and it is on the platform tools folder. Did all the commands, but the second time I run the same command (like it says on the video) it gives me the error I mentioned and I don't even get the loading bar on the phone. Tried 3 times, no luck.
Sent from crispy tocino
Check PM
Same problem actually
BD619 said:
Check PM
Click to expand...
Click to collapse
I am actually having the same issue as described above, and cannot for the life of me figure out what I did wrong.
Any insight?
saxman126 said:
I am actually having the same issue as described above, and cannot for the life of me figure out what I did wrong.
Any insight?
Click to expand...
Click to collapse
So Hboot 1.55, S-ON, and can't go back to stock?
Go to this: http://forum.xda-developers.com/showthread.php?t=2658910
Download that RUU. Now, go into fastboot and relock your bootloader. Flash the firmware on that thread through fastboot, there's a video there showing you how. After that is done, go back to fastboot and you can run the RUU you downloaded from that thread. That's what I did and worked like a charm. Recommended if you use USB 2.0
PaoloMix09 said:
So Hboot 1.55, S-ON, and can't go back to stock?
Go to this: http://forum.xda-developers.com/showthread.php?t=2658910
Flash the firmware on that thread through fastboot, there's a video there showing you how. After that is done, go back to fastboot and you can run the RUU you downloaded from that thread.
Click to expand...
Click to collapse
Hi. You mean flash 4.06.651.4 version at first and then flash 5.05.651.2 version ? Is it update HBOOT from 1.55 to 1.56? What about warning message on that thread "***IMPORTANT NOTE*** you must first update your hboot to 1.56 to flash this 4.06 RUU, see full firmware below ( I recommend being s-off before doing so)"
I have. Hboot 1.55, S-on, Custom ViperOne 7.0.1
kai82 said:
Hi. You mean flash 4.06.651.4 version at first and then flash 5.05.651.2 version ? Is it update HBOOT from 1.55 to 1.56? What about warning message on that thread "***IMPORTANT NOTE*** you must first update your hboot to 1.56 to flash this 4.06 RUU, see full firmware below ( I recommend being s-off before doing so)"
I have. Hboot 1.55, S-on, Custom ViperOne 7.0.1
Click to expand...
Click to collapse
Just flash firmware 4.06.651.4 (you'll be on hboot 1.56) and then run that RUU. Don't worry about 5.05.651.2 firmware or RUU.
Make sure you relock your bootloader before anything.
Whenever the RUU is done and you're back in stock, you'll get the OTAs to 5.05.651.2, just telling you exactly what I did that worked, I also had a lot of trouble getting back to stock/unrooting.
Sent from crispy tocino

[Q] OTA 5.02 Update with TWRP

Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:
Craig_CFC said:
Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:
Click to expand...
Click to collapse
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2
alray said:
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2
Click to expand...
Click to collapse
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542
I meant to add - i can flash the Firmware with S-On can't i? as it's custom.. do i need to be rooted for that? and once firmware has been flashed i will need to Sunshine S-Off or Sunshine 1st then the rest? can i instal that RUU on S-On? If so i will just go ahead (without updating to 5.02) ..would this be ok? I think i need S-Off to chaange CID though dont i? so Sunshie 1st it would be?
Craig_CFC said:
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542
Click to expand...
Click to collapse
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.
alray said:
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.
Click to expand...
Click to collapse
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:
Craig_CFC said:
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:
Click to expand...
Click to collapse
No you don't understand, you must use the fastboot version posted at page 4 or it will not work. Read the post you'll understand. The regular fastboot from the Android sdk won't work for this RUU.
I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update
ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe
Craig_CFC said:
I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update
Click to expand...
Click to collapse
The European RUU is HTC___001. If your phone is s on you cannot change your CID. You need s off to do that
Craig_CFC said:
ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe
Click to expand...
Click to collapse
do not flash that firmware whilst s-on, its modified firmware and will brick your phone, you need s-off to change your CID or falsh any different firmware than vodafone firmware.
I discovered that last night i kinda knew anyway that i could not change the CID without S-Off but with everything going on i forgot.. iv'e decided to stick Android Revolution HD 91.1 on his HTC One.. at least he'l have 5.02 and a quick & reliable OS ... iv'e head that 5.02 is the last OTA update for the M7 so it wouldn't matter if he can't update ..cheers for your help anyway
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
no need to change cid, you can flash any custom rom on any CID.
whats your current firmware version, it will be something like 6.09.161.??
---------- Post added at 12:19 PM ---------- Previous post was at 11:38 AM ----------
Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
here you go mate, full RUU Lollipop update for vodafone: https://www.androidfilehost.com/?fid=95916177934540895
Download and flash using htc_fastboot.exe https://www.androidfilehost.com/?fid=95916177934539737, locked / relocked bootloader is required.
Thank You - i am downloading that now
whats your current firmware version, it will be something like 6.09.161.??
Click to expand...
Click to collapse
I'm unsure on that right now as i dont have the phone with me but i'm going there soon and i will post the firmware version here before i go ahead and do anything - thanks again
Thank you everyone for all your help ..in the end i just flashed Android Revolution HD 91.1 ..he's happy with that and he's got his Lollipop 5.02 now i'll keep the Voda RUU for future reference - thanks again!
Craig

HTC one m7 at&t need to update

Hey Guys
I really need your help. I have HTC one m7 at&t Android version 4.1.2 and software version 1.26.502.12. I made unlock bootloader but I cant make s-off.
My h-boot 1.44. I used revone always giving me " error code =-06".
I tried to flash it with RUU but didn't take flash, also I tried OTA but the same. I tried everything.
So I need your hep how to make s-off. Or I need update flash compatible to my phone with s-on.
PN0712000
cws_001
Thanks.
Ahmad-ak said:
Hey Guys
I really need your help. I have HTC one m7 at&t Android version 4.1.2 and software version 1.26.502.12. I made unlock bootloader but I cant make s-off.
My h-boot 1.44. I used revone always giving me " error code =-06".
I tried to flash it with RUU but didn't take flash, also I tried OTA but the same. I tried everything.
So I need your hep how to make s-off. Or I need update flash compatible to my phone with s-on.
PN0712000
cws_001
Thanks.
Click to expand...
Click to collapse
Is your phone on the at&t network? If not you willl not receive ota updates and flashing ota update manually requires S-OFF. Try rumrunner S-OFF. Once S-OFF change your CID so you can flash the Dev edition RUU and receive ota updates normally.
My phone is AT&T but I can't update because I am not using the same carrier. Rumrunner will not work because my hboot 1.44.000 even revone didn't work. So please help me to make s-off
Ahmad-ak said:
Rumrunner will not work because my hboot 1.44.000 even revone didn't work. So please help me to make s-off
Click to expand...
Click to collapse
Then update your hboot to 1.54/.1.55 using a RUU
this one for example: http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Once the RUU is flashed (and hboot updated) unlock the bootloader, flash twrp recovery, root the phone and achieve s-off using rumrunner
Or you can buy sunshine s-off for 25 if you want to make it simple.
I tried with RUU flashs but also not working
Ahmad-ak said:
I tried with RUU flashs but also not working
Click to expand...
Click to collapse
What is the problem exactly when flashing the RUU?
Error 158. It doesn't flash. Taking in consideration that I'm choosing the right flash.
Is there any way to flash hboot alone or change cid with s-on,?
Ahmad-ak said:
Error 158. It doesn't flash. Taking in consideration that I'm choosing the right flash.
Is there any way to flash hboot alone or change cid with s-on,?
Click to expand...
Click to collapse
And this is using the RUU linked above? 3.17.502.3?
No you can't change your CID with s-on.
alray said:
And this is using the RUU linked above? 3.17.502.3?
No you can't change your CID with s-on.
Click to expand...
Click to collapse
I tried all the guru RUU flashed that suitable to my phone's CID. I think I need to make s-off for now.

Categories

Resources