[Q] Nook HD SD boot failure - Nook HD, HD+ Q&A, Help & Troubleshooting

Hi
i think i am not far away from bricking my NOOK HD so i need some advice please .
I had been using bokbokan's excellent sd boot method of running Android on my Nook for months when the sd card failed so i went through the same process again but now the Stock Nook Os seems to have gone .
When i power on the Nook without the sd card inserted on it will boot in to Cyanogenmod or CWM if i press and hold the n button
I am not too bothered about the stock OS to be honest but the version of Cyanogenmod i have on the nook is not right as no matter what i do Gapps will not install correctly.
So what would the easiest or best method be of getting the most up to date Android software on to my nook be ?
If i cant boot from SD i am not bothered either .
Thanks in advance for any help .

Any ideas appreciated ,thanks
Sent from my BN Nook HD using Tapatalk

Try going to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Then use that to flash the plain stock zip from item 6 there. This will repair your internal memory with stock so you can start over.
Sent from my BN NookHD+ using XDA Premium HD app

Thanks very much that sorted it , I now have stock ROM booting again .
Now I just need to remake my bootable SD kit kat
Cheers
Sent from my XT890 using Tapatalk

Related

[Q] Where can I get stock ROM for restoring Nook HD+?

Hello,
Kudos to all the nice folks here for the CM mod and updates.
My Nook HD+ has battery issues and was told to send it back to B&N. I took a backup of the stock ROM before installing CM but I'm unable to find it :crying:
I've searched a lot for this and would really really appreciate a link to download the ROM and copy to the microSD card.
I believe I just need the "clockworkmod" folder on the microSD card, right? If not, it would be great to have quick steps.
Thanks again for your time..
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks a lot for your prompt response, leapinlar.
I downloaded "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).zip" and extracted it to get "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img" which I burned to the microSD card using "Win32DiskImager"
And then, I copied "NookHDplus-factory-2.1.1-plain-stock.zip" file to the card. I tried inserting this card to the Nook HD+ device but it just boots to CM instead of showing options to restore.
I believe I'm missing something. I'm so sorry to bother you but would greatly appreciate if you could spare a few moments to point me in the right direction. It would be immensely helpful.
Thanks so much again for responding.
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks again, leapinlar.
I tried the alternate procedure and did the following:
1. Used "SDFormatter" to format the card and used "EaseUS Partition Master" to make the single partition on the microSD card "active"
2. Copied files making sure to copy "MLO" file first before copying the rest. (Please refer to attachment for the files that were in the card)
I was able to complete the "install from SD card" option and it finished with the following message:
Code:
Random Offset: 0xcb
Boot Files...
Boot Files...
Install Complete.
When I tried rebooting the device, Nook HD+ seems to load stock but gets stuck at 99% forever. Not sure how to proceed now. Can I just go ahead and return the device or should I bring it to working condition?
Thanks again for sparing your time, leapinlar.. Greatly appreciate it.
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
just to confirm
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
banditsw said:
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
Click to expand...
Click to collapse
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
banditsw said:
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
Click to expand...
Click to collapse
I am talking about booting to CWM and selecting factory reset on the main menu. That will wipe all installed apps and settings on whatever is installed on internal memory.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks so much, leapinlar. That worked!
adding to this
muchcalmer said:
Thanks so much, leapinlar. That worked!
Click to expand...
Click to collapse
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
gomavs123 said:
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
Click to expand...
Click to collapse
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
gomavs123 said:
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
Click to expand...
Click to collapse
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
gomavs123 said:
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
Click to expand...
Click to collapse
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
brux4me said:
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
Click to expand...
Click to collapse
That is correct, there is no cyanoboot logo with rev2. And rev2 works perfectly as root.
What I mean by no removed file protection is that with rev2 you cannot change any files in /system without it being detected and on the next boot it resetting itself to pure stock with no root. With rev3 that file protection for /system is removed, but it shows the cyanoboot logo. It is a trade off.
If you want rev2 I can repost the link.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So, I have used every trick you have posted to recover or install a new rom. After I install the rom and GAPPS with the bootable SD card, I restart and it just sits on the NOOK screen. I did notice I get a this: INSTALLING UPDATE / Random OFFSET: 0x26d / Boot Files...Boot Files...
The Random Offset number changes each time I try to install the rom.......any ideas?

Stuck in bootloop, ROM running from SD

I have a Nook HD+ that suffers from the emmc bug, so I'm trying to load a rom into the sd card.
I tried burning several recovery images but only one booted properly(early 7) others went to emmc recovery directly(dunno why).
When I finally got into recovery I adbed ROM and Gaps into the tablet, then flashed them, upon reboot i always happened to go back to recovery, so I replaced uImage(i tried 2) in the SD Card with one that i found on xda, now after reboot I did see the boot animation, but it is shifted to the right and stuck in a boot loop.
What did I do wrong?
mmk92 said:
I have a Nook HD+ that suffers from the emmc bug, so I'm trying to load a rom into the sd card.
I tried burning several recovery images but only one booted properly(early 7) others went to emmc recovery directly(dunno why).
When I finally got into recovery I adbed ROM and Gaps into the tablet, then flashed them, upon reboot i always happened to go back to recovery, so I replaced uImage(i tried 2) in the SD Card with one that i found on xda, now after reboot I did see the boot animation, but it is shifted to the right and stuck in a boot loop.
What did I do wrong?
Click to expand...
Click to collapse
If it always boots to recovery, you are in a recovery bootloop. Go to my HD/HD+ CWM thread linked in my signature and read item 10.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
If it always boots to recovery, you are in a recovery bootloop. Go to my HD/HD+ CWM thread linked in my signature and read item 10.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
But thing is, I have a dead emmc, how can i flash the stock recovery?
mmk92 said:
But thing is, I have a dead emmc, how can i flash the stock recovery?
Click to expand...
Click to collapse
I thought you said it booted to emmc recovery. How can you have a dead emmc and still boot to that?
Sent from my BN NookHD+ using XDA Premium HD app
It boots into emmc recovery but I get a lot of "Can't mount" errors. I got this nook from a friend a few days ago, thought I'd fix it up somehow to boot it up from sdcard.
Do you think that I have a chance of booting from internal memory since Emmc recovery works?
mmk92 said:
It boots into emmc recovery but I get a lot of "Can't mount" errors. I got this nook from a friend a few days ago, thought I'd fix it up somehow to boot it up from sdcard.
Do you think that I have a chance of booting from internal memory since Emmc recovery works?
Click to expand...
Click to collapse
Put that stock recovery on it and see what it does. It is trying to repair itself by trying to boot to stock recovery. It cannot get worse than it is. You can use that early 7 SD to flash it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Put that stock recovery on it and see what it does. It is trying to repair itself by trying to boot to stock recovery. It cannot get worse than it is. You can use that early 7 SD to flash it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I flashed the recovery onto it, I get "error mounting emmc" and flash was successful(weird).
Anyway I'm trying to install a noemmc rom, out of all the noemmc recoveries that I have tried, only one seemed to work, all others loaded straight to emmc recovery. What do you think is the problem?
mmk92 said:
I flashed the recovery onto it, I get "error mounting emmc" and flash was successful(weird).
Anyway I'm trying to install a noemmc rom, out of all the noemmc recoveries that I have tried, only one seemed to work, all others loaded straight to emmc recovery. What do you think is the problem?
Click to expand...
Click to collapse
Did you boot without the SD in after flashing? If so, what did it do?
Booting only to the early 7 SD is normal with a messed up emmc.
You need to start the SD burning again after formatting it with SDFormatter. Do not change any files on it after flashing the ROM.
Sent from my BN NookHD+ using XDA Premium HD app
I erased it with SDFormatter then used disk imager to flash the image on the sdcard, I am still getting the same results for this recovery in particular(which was recommended by verygreen for his dead emmc work ouround).
Basically after I boot the tablet, the recovery logo shows up longer than usual, then the recovery shwos up with EMMC RECOVERY written on the top left of the screen. But this emmc recovery is different than the one that usually shows up when I boot without the sd card, same names but the UI has a slightly differnet layout.
This is so weird, what should I do? I really want to get this tab working
mmk92 said:
I erased it with SDFormatter then used disk imager to flash the image on the sdcard, I am still getting the same results for this recovery in particular(which was recommended by verygreen for his dead emmc work ouround).
Basically after I boot the tablet, the recovery logo shows up longer than usual, then the recovery shwos up with EMMC RECOVERY written on the top left of the screen. But this emmc recovery is different than the one that usually shows up when I boot without the sd card, same names but the UI has a slightly differnet layout.
This is so weird, what should I do? I really want to get this tab working
Click to expand...
Click to collapse
Not sure you answered my question. It did not boot to stock recovery when you booted without the SD inserted? Stock recovery looks entirely different than CWM. Just a nook screen. It should not have a cyanoboot screen (is that what you are calling the recovery logo?). And it should try to automatically repair itself.
And if you want to install verygreen's noemmc ROM on SD you MUST use his image from that post. And do not change any files.
Sent from my BN NookHD+ using XDA Premium HD app
I got it fixed!! After 7hours of trial and error I finally got it working, is this problem very common? I am willing to write a very comprehensive guide for recoverying a dead nook, with all problems that I faced and a compilation of threads, posts, and users that helped recover the tablet from the dead.
mmk92 said:
I got it fixed!! After 7hours of trial and error I finally got it working, is this problem very common? I am willing to write a very comprehensive guide for recoverying a dead nook, with all problems that I faced and a compilation of threads, posts, and users that helped recover the tablet from the dead.
Click to expand...
Click to collapse
I don't need a comprehensive guide, just basically what it was that worked.
Sent from my BN NookHD+ using XDA Premium HD app
Stuck in bootloop
Hi LeapLinar,
I'm running into the same issue - recovery bootloop in CWM.
As per the instructions in this thread, I flashed stock recovery but I still got the Cyanoboot logo when rebooting and I also tried flashing your rooted stock 2.1.1 but it got stuck at 99% when rebooting to stock ROM.
Any suggestions ? Should I do a hard reset ?
Thanks
freekyin said:
Hi LeapLinar,
I'm running into the same issue - recovery bootloop in CWM.
As per the instructions in this thread, I flashed stock recovery but I still got the Cyanoboot logo when rebooting and I also tried flashing your rooted stock 2.1.1 but it got stuck at 99% when rebooting to stock ROM.
Any suggestions ? Should I do a hard reset ?
Thanks
Click to expand...
Click to collapse
Please don't post the same question in two different threads. I answered you in the other thread.
Sent from my BN NookHD+ using XDA Premium HD app
Sure. Thank you.

Help with Bootloop issue

Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!
wasabitobiko said:
Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!
Click to expand...
Click to collapse
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks man.. I'll give it a shot and let you know how it goes.
Cheers!
Stuck at CWM main screen
leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!
wasabitobiko said:
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!
Click to expand...
Click to collapse
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app
Dohhhhhh..
leapinlar said:
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
What a dumbass!!!... Got things working again.. Huge thanks... again!!
Cheers!

how did it get back to stock ? confused

hi
i have a nook hd and nook hd+
i installed cm10 on both systems using the permanent sd card method
the nook hd is used by my five year old and i heard her saying i am going to wipe minecraft
didnt think anything of it and tonight i powered up the nook and it has gone back to completely stock firmware
would the erase and wipe from the menu return it to stock even though cm was installed?
was i very lucky ? i didnt have a back up of the nook hd but i do have a back up of the hd+
emu123 said:
hi
i have a nook hd and nook hd+
i installed cm10 on both systems using the permanent sd card method
the nook hd is used by my five year old and i heard her saying i am going to wipe minecraft
didnt think anything of it and tonight i powered up the nook and it has gone back to completely stock firmware
would the erase and wipe from the menu return it to stock even though cm was installed?
was i very lucky ? i didnt have a back up of the nook hd but i do have a back up of the hd+
Click to expand...
Click to collapse
I'm not sure what you mean by the permanent sd card method. Do you mean using an sd card to install CM permanently to internal memory? If that is what you meant and you did not install CWM to internal memory, then it is possible that she did something to make it fail on boot and keep trying and the 8 failed boot procedure would kick in and reset the device to stock. The 8 failed boot reset fails if you have CWM on internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I'm not sure what you mean by the permanent sd card method. Do you mean using an sd card to install CM permanently to internal memory? If that is what you meant and you did not install CWM to internal memory, then it is possible that she did something to make it fail on boot and keep trying and the 8 failed boot procedure would kick in and reset the device to stock. The 8 failed boot reset fails if you have CWM on internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
hi
i used this guide
http://forum.xda-developers.com/showthread.php?t=2317500
didnt know about the 8 failed boot method , the nook was the wrong way round in the case and everytime it booted the power button was shutting it off
so it looks like its gone back to stock that way
ah i understand now , re reading the guide the cwm doesnt get installed to the internal memory only stays on the sd card
pretty handy for people wanting to get back to stock easily
emu123 said:
ah i understand now , re reading the guide the cwm doesnt get installed to the internal memory only stays on the sd card
Click to expand...
Click to collapse
If you read the guide carefully you will see that CWM does get installed on internal memory. It says to download and install three files and one of those three is CWM for internal.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
If you read the guide carefully you will see that CWM does get installed on internal memory. It says to download and install three files and one of those three is CWM for internal.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
oh
so i must of been very very lucky

[Q] Nook HD boot loop issue

I have a strange issue with a nook HD where someone tried to do a CM upgrade to 11 from 10.2. The issue is that after they did this the tablet now is stuck in a boot loop where the Nook logo shows, then the cyanoboot logo, it will repeat this process for four times then load into clockwork mod.
I have tried to create bootable SD cards but I am unable to get it to boot the SD, it just repeats this cycle over and over.
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Nightshades said:
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Click to expand...
Click to collapse
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Nightshades said:
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Click to expand...
Click to collapse
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Nightshades said:
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Click to expand...
Click to collapse
Sometimes it is hard to get an SD to boot. Follow the procedure in making the SD exactly as described in my HD/HD+ CWM thread, item 1a, including copying MLO first and not inserting the SD into the slot the first time until the device is off. Also try a different SD.
Sent from my BN NookHD+ using XDA Premium HD app

Categories

Resources