Hi guys,
I have a GT-P7310 and was running ICS for a while. Decided to give CM10.2 a spin but got the following results:
View My Video
I thought, bad rom and I put the latest KK nameless, but same thing! Now I went back to ICS and the problem still persists!
It happens only when I reboot, let the screen go off and then turn the screen on with the power button. Have to reboot by pressing the power button for a while.
Touch etc works fine, just the screen.
What could be the problem here?
Related
I have a bell Vibrant. I was running on Darky's FW. But this happens on any firmware and even on recovery menu. As the phone is booting the touch buttons are illuminated, if I press one (menu or back) that light goes out and stays out and I can't press it anymore. (This also happens in CWM) When phone boots up both back lights are on and go off with the screen as they should. When I unlock to phone both lights come on and go out as they should. But if I press the menu button on the home screen, it opens the menu section and the light goes out upon button press but it sticks or something and keeps pressing the menu button on its own. I can leave my phone sitting on the home screen and the menu comes up and goes away in a continuous loop until I lock the phone. The same thing happens if I unlock the phone but press the back button. the light goes out after I press it and it stays out until I lock the phone again. So my phone can sit at the home screen but only one touch button is lit up? I'm sorry for the book I just wrote but I'm frustrated and can't figure out what to do. If someone has any ideas apart from sending it to Bell for repairs please help.
Thanks
Did you try flashing it back to stock JH2 or JL2 ?
does it work on stock ROMS ?
Yes I was on Darky's ROM, and when I got home I flashed back to JH2 like I have done in the past and it didn't fix anything. But I think the problem goes deeper than the ROM because even in Clockwork mod or during boot if I press one of the buttons the light goes out and stays out. I tried flashing back to JH2 and JK3 with odin. And Kies tells me I can upgrade current version even tho I flashed JH2 & JK3 from samsung-firmwares.
my suggetion, send the phone back for repair/exchange
and flash it back to stock ROM before you do
sounds like a HARDWARE defect
Weirdest thing. I left the phone off in my car when I went to work today and when I turned it back on it didn't do it anymore. But a couple of days ago this happened and fixed itself too and then happened again the next day.
Mine has done this intermittently since I upgraded to JL2 at the beginning of December. Doesn't matter what rom is running, it's still the same, even sometimes does it at the cwm recovery screen. It's annoying. :\
Mine does it too
Sent from my GT-I9000 using XDA App
there is a fix for this. I have the same problem, but I am running a custom rom and not sure if it can be flashed without going back to stock. Try this...
http://androidforums.com/samsung-gal...on-glitch.html
My I9000m stock with JL2 used to do that too. I installed speedmod k13c kernel and then darkys 9.3. That problem totally never appeared again.
Sent from my GT-I9000 using XDA App
My Fiancee's G1 wont turn on at all,No T-mobile slpash screen or nothing.LED lights turn on and Call,Home,Back and Power buttons light up except for the screen itself her phone wasnt rooted,I have never experienced this before.
Can someone please help?
the phone is not turning on via the power(end) button???
try pressing the camera button and keeping it pressed, also press the power button to enter into hboot mode...if u succeed in entering that mode, the phone is fine, or else it could be bricked.
Try Home+Power see if you can get into recovery mode.
If you can wipe cache data.
Hi everyone, hope it's okay to post this here since this Question relates to mine.
I'm having a trouble like this except instead it's like my backlight went out, it was working fine until my alarm on my phone went off and when I went to turn it off I had to take the battery out of my phone because the screen wasn't pulling up. It flashed basically, so when I put the battery in the screen came on but no backlight. Could it be due to Cyanogen? I'm restoring my backup to see what else could I try?
could u be a bit more specific?phone is working??? calls etc???or are u stuck somewhere????
As I said, the screen came on but no backlight. The phone works fine except for the backlight I'm trying to figure out if it's a hardware issue or a software issue. I don't know how much more specific I can get really except that the only way to see the screen is to hold it at a certain angle so the light hits it just right.
My phone was working just fine till today morning my phone hung up. As a general response I pressed the power key to lock it. Nothing happened. Nothing. So I waited it out. Soon the phone was back but the power key became totally dead. It wasn't locking the screen. I used the Screen lock app on emanoN rom v4 to lock the phone and it was working. The screen was getting locked. Figuring this must be some freak bug I tool out the battery and restarted the phone. Same problem except now even simply pressing and not long pressing the lock key would prompt the shut down menu. If ignored the phone just casually restarts. This is annoying because if out of reflex i press the power key , my phone will restart. Now, sometimes the power key does do it's job of simply locking and unlocking the phone. But sometimes it just restarts the phone.
I thought this was a problem with the ROM and so i shifted to godell's MORe ROM. Same problem. Now I've shifted to fresh stock 2.3.6 flashed using Odin and I'm still having the same problem. Pressing power does not lock and instead prompts the shut down/restart menu. and Sometimes the phone just restarts at random . Please help me fix this.
I'm going to go for a full downgrade to 2.3.3 [Since my 2.3.6 upgrade just flashed the MODEM*.md5 and CODE*.md5 files]
But before that.. Why is this happening? Is there any fix?
Thanks!
I have completely reflashed to gingerbread 2.3.3 using odin and problem persists.
I do not think this is a hardware issue,because the button's reactivity is just fine. It's just the action that it does after the keyPress.
Your power key problem might be a hardware issue... :| How old is your phone? You might have used it too much. My friends galaxy mini- the volume up button doesnt work because he used it too much.
It's about an year old.. I'd say 10-11 months or so..
Hi guys, today noticed some strange issue with my touchpad. When i tried to turn on my TP it didn't respond, after few tries i took brake, when tried again used all possible combination of buttons to check if its power bricked. On holding power button + home combination after few sec it finally showed boot screen and it turned android on.
My battery was on 85% but still it gave my trouble to turn him on.
Is it normal thing or should be better to clear my TP and install Android from scratch?
Im on CM9 last nightly build with new kernel from Shumash.
Sent from my HD2 using xda premium
Sometimes i have to hold the power with or without the home button for 30 seconds but not very often.
maneken25 said:
Hi guys, today noticed some strange issue with my touchpad. When i tried to turn on my TP it didn't respond, after few tries i took brake, when tried again used all possible combination of buttons to check if its power bricked. On holding power button + home combination after few sec it finally showed boot screen and it turned android on.
My battery was on 85% but still it gave my trouble to turn him on.
Is it normal thing or should be better to clear my TP and install Android from scratch?
Im on CM9 last nightly build with new kernel from Shumash.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Following this guide, http://forum.xda-developers.com/showthread.php?t=1426244
Will completely turn the TP back to original. It's kind of a PITA, but it works. Read the whole thing and if you have problems with novaterm, there's a work around on page 12.
I'm currently using cocore 6.2 and Light JB.
I'm very happy and satisfy with the rom but there's one small problem that I've never faced before in any other rom.
When I am surfing the internet, or reading anything, if I didn't touch the screen for 15 seconds, it will turn off itself which is normal.
What I usually do when it turn off I will press the home button immediately and here comes the problem. In any other rom, when I press the home button immediately after the screen automatically turned off, the screen will turn on and back to the screen that i was reading (internet, picture etc.). But while I am using Light JB, when I press the home button, my phone screen will turn on but it will jump back to the homescreen instead of the browser or picture I was reading.
Does anyone face the same problem as me?
I want to know if it's the rom's problem or my rom installation didn't go well.
If it's the rom's problem then I'll just bear with it but if its only me facing this problem I will consider re install the rom.
Thank you very much.
northernhero said:
I'm currently using cocore 6.2 and Light JB.
I'm very happy and satisfy with the rom but there's one small problem that I've never faced before in any other rom.
When I am surfing the internet, or reading anything, if I didn't touch the screen for 15 seconds, it will turn off itself which is normal.
What I usually do when it turn off I will press the home button immediately and here comes the problem. In any other rom, when I press the home button immediately after the screen automatically turned off, the screen will turn on and back to the screen that i was reading (internet, picture etc.). But while I am using Light JB, when I press the home button, my phone screen will turn on but it will jump back to the homescreen instead of the browser or picture I was reading.
Does anyone face the same problem as me?
I want to know if it's the rom's problem or my rom installation didn't go well.
If it's the rom's problem then I'll just bear with it but if its only me facing this problem I will consider re install the rom.
Thank you very much.
Click to expand...
Click to collapse
Stock rom acts the same ... Pressing power button wakes up the device without going to home screen.
tapatalked
rajman said:
Stock rom acts the same ... Pressing power button wakes up the device without going to home screen.
tapatalked
Click to expand...
Click to collapse
yup, stock rom and all other custom rom (jelly mod,chucky,etc) i used do the same
only light jb will back to homescreen