While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.
Check the usb cable
Sent from my ST25i using Tapatalk
Don't flash stock recovery(I guess there isn't any ). So, try flashing stock firmware via Odin. Use correct name of ops file : COOPER_v1.0.ops & Odin straightaway displays the model name in its title bar even if the phone isn't physically connected to PC via USB cable.
Use Odin v4.42 atleast.
& pls. never flash stock firmware directly over any jellybean rom. First flash any stable CM7 rom & then u r good to go
Hope this helps...!!
nazmul99 said:
While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.
Click to expand...
Click to collapse
When your phone is not detected by odin, it's usually the driver's. Just follow this link,
How to Install Stock ROM on Galaxy Ace Using Odin [GT-S5830]
Go to the "Preparation" section and download all the necessary files. Re-install the drivers again and check if odin detects it. Do post the result. Hope I Helped
I think Cable is OK, because mass storage mode is working with that cable.But when in download mode, PC saying Mulfunctioned device.
I have put ops file, showing my model number. But whenever I click on start. Its saying to connect the device first.
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Are you able to go to Recovery Mode? If yes, then try installing any CM7 custom rom. Make sure to do "Wipe data/ factory reset", "Wipe cache partition", Mounts & Storage> Format /system, Advanced> "Wipe Dalvik cache" before you flash a custom rom. Do post the result. Hope I Helped
---------- Post added at 03:35 PM ---------- Previous post was at 03:24 PM ----------
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Is the pacman rom working normally?
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Can u show us the error screen?:sly:
Unable to install CM7. But CM9(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.
nazmul99 said:
Unable to install CM7. But CM11(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.
Click to expand...
Click to collapse
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped
mahithm said:
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped
Click to expand...
Click to collapse
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.
nazmul99 said:
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.
Click to expand...
Click to collapse
No problem I hope this works for you :fingers-crossed:
Thank You
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:
nazmul99 said:
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:
Click to expand...
Click to collapse
Glad to hear it worked buddy
Related
Dear XDA,
A friend of mine has a galaxy ace stuck in bootloop. The phone has never been rooted or flashed with a custom rom.
I tried to help him, reflashed stock rom through odin and did a wipe/factory reset. But still havent had any succes.
Do you guys have any suggestions ?
Greetings,
A happy galaxy s owner
Also, i do not think it is possible to flash a custom rom because the phone doesnt has CWM and i cant root with SuperOneClick because USB Debugging is not enabled. And I cant acces the phone.
Try this:
Google and download this file names S5570_Odin_Multi_Downloader_v4.38
Cooper_v1.0.ops
Orion.ops
then download a stockfirmware for your ace.
just use some COMMON SENSE in the app, specifically "ODIN" and locate the ".OPS file" and the STOCK FW you just downloaded. Voila! Good as new.
If you can boot to recovery you most definitely can install CWM.
Download official stock rom, then flash it, after that boot into recovery then do a full wipe
Hope that will help
Sent from my GT-S5830 using Tapatalk 2
Guys, thanks for the replies but they are useless.
I mentioned the following : "Reflashed stock rom through odin and did a wipe/factory reset. "
I did this with the cooper OPS, why should the orion do something else ?
Any other suggestions?
htcsnap93 said:
Guys, thanks for the replies but they are useless.
I mentioned the following : "Reflashed stock rom through odin and did a wipe/factory reset. "
I did this with the cooper OPS, why should the orion do something else ?
Any other suggestions?
Click to expand...
Click to collapse
Did you use the 4.38 Odin? Because I think Ace and S uses different odin versionsIf that didnt work then root it or install CWM. Last resort IMO. Just tell him that you used magic and stopped the bootloop
---------- Post added at 06:37 PM ---------- Previous post was at 06:37 PM ----------
Paulicarpio said:
Google and download this file names S5570_Odin_Multi_Downloader_v4.38
Cooper_v1.0.ops
Orion.ops
then download a stockfirmware for your ace.
just use some COMMON SENSE in the app, specifically "ODIN" and locate the ".OPS file" and the STOCK FW you just downloaded. Voila! Good as new.
Click to expand...
Click to collapse
What is the orion.ops for?
Flash 2.3.3 first, then 2.3.4 and followed by 2.3.6
Respecting others never hurt, let's build a better XDA community.
hello! i had your problem with my ace and i could not find a solution at first but after a while i had worked out a solution. NOT guaranteed to work. also you will lose ALL DATA
1.flash stock through odin (2.3.5 reccomended)
2.wipe/factory reset
3.flash this: https://docs.google.com/file/d/0B-eHBmC1vSXGc1BRSWlqRW1Nc28/edit - this will root your device
4.afterwards flash this: https://docs.google.com/file/d/0B-eHBmC1vSXGeWNBOXhCVjZTRkk/edit - this will give you cwm
5.turn off then boot into recovery again.
6.wipe data/factory reset, cache, dalvik cache, mount and format system
7. install this ROM: https://docs.google.com/file/d/0B-eHBmC1vSXGVU1TSjdpUlF4MDg/edit
8.boot up your phone. it will take about 5 minutes to boot again, and you will have xperiatized rom. you can now flash whatever rom you like or go back to stock. i hope i have helped you and if i have please hit thanks
htcsnap93 said:
Dear XDA,
A friend of mine has a galaxy ace stuck in bootloop. The phone has never been rooted or flashed with a custom rom.
I tried to help him, reflashed stock rom through odin and did a wipe/factory reset. But still havent had any succes.
Do you guys have any suggestions ?
Greetings,
A happy galaxy s owner
Also, i do not think it is possible to flash a custom rom because the phone doesnt has CWM and i cant root with SuperOneClick because USB Debugging is not enabled. And I cant acces the phone.
Click to expand...
Click to collapse
Which rom did you flash with Odin? I think that was the problem... Flash this one: S5830XWKB7 Google for the download link, sorry I can't provide you it right now. The package contains four files, put them into Odin and flash it. The phone will boot. It's a multi csc Froyo. Than, you can flash the rom of your choice.
Btw: you can flash cwm, even if you're in bootloop. Just copy the zip to your sd card and flash it in recovery mode, than boot to cwm. Okay, you need an exetrnal/inernal sd card reader for this.
Hi,
Well i was trying to rooting up my phone for trying out Cynogenmod 9 (ICS 4.0) .....
The files i transferred to the sd card :
1.) recovery-clockwork-5.0.2.6-galaxyace-fix
2.) upd_1
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
1.) http://forum.xda-developers.com/showthread.php?t=1034145
2.) http://forum.xda-developers.com/showthread.php?t=1552695
I'll appreciate any help regarding my boot loop problem.....
Thanks & Regards
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Same problem
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Prawesome said:
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Click to expand...
Click to collapse
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
kerrywez said:
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Click to expand...
Click to collapse
Boot into recovery and wipe data.
Make a wipe in standart or full wipe in custom and flash again with odin! It will surely help
Doo:DAce said:
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
Boot into recovery and wipe data.
Click to expand...
Click to collapse
Seems like it...Anyway,I dont think the OP even comes here now
I too have this problem!
Is the phone bricked? I have tried using packages from Odin and One Click Unbrik but they both fail, I can get into download mode, but I cannot get into recovery mode. It just says ARM9 or something whenever I try. Is there a solution yet?
i fixed my phone i kept on having boot loops after falshing single packing so i turned the phone off then hold power and home till you come to recovery option wipe cache and i think its factory reset or full wipe so do both wipes then reboot phone WALA my phone was working hope this helps and dont forget to tick thanks button :good:
boot loop with other issues too...
hi there guys. I'm new to this forum and also to flashing...
but anyways I had a good look before flashing my phone but still messed it up...silly me
I tried rooting my phone via SD card(first clockwork mod ace 4 followed by clockwork mod 5 as said in tutorial) then upd_1 and then cm9. But after installing clockwork mod ace 4 I get :" E: failed to mount/ system (invalid argument)" same happens when trying to wipe cache partition/ data/ factory reset.
I can get into android system recovery no problems and also into odin download mode (where it gives you the warning and prompts you to press volume up if you still want to continue. It is also stuck on the samsung screen if I don't press anything.
But when trying to connect the phone to odin in order to rectify what I've done (with the one package methode, either gingerbread or cmw9) odin won't detect my phone. I used several different cables, original samsung cables, changed usb ports (directly off the motherboard) but to no avail.
heimdall will recognise the phone as far as I can see (when you click on detect device it says: "device detected") but I cannot find the right files I need to use for heimdall. I would very much appreciate any help and advice. Please point me in the right direction, show me where to download the correct files and which ones and please bear in mind I'm a noob. put it as plain as bread for me please :good:
just flash clockworkmod 5 and format system and data...
do a complete wipe ...clear cache,, wipe dalvik
then mount system and data and install any of ur modded stock or cm7... enjoy
---------- Post added at 08:48 PM ---------- Previous post was at 08:47 PM ----------
many roms are pre rooted plus u dont need rooot access to flash rom
to flash CustomROM u dont need to root first our ace simply flash CWM 5 and put your CustomROM flashable .zip to your sdcard and then fullwipe (data,cache,advantage) and done.....
most of CustomROM now can directly flash from previous or Other CustomROM without flash to StockROM first..
CMIIW
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
hey, well I did what you said but when I do so it just comes up with installation aborted...same as with everything else I try to install from SD card...
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
AaronvAce said:
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I won't question what you guys are saying since I'm a noob but the tutorial I followed specifically told me to do that. I just get installation aborted every time I try to install recovery clockwork 5...or anything else for that matter. thanks for your help guys
maybe this will give you a better picture of my predicament...
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
val1607 said:
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
Click to expand...
Click to collapse
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
dxppxd said:
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
Click to expand...
Click to collapse
lol as if I didn't already find out... but what can I do now? apparently there is no custom mod for the 5830i in ICS or jelly bean.cannot flash a new rom from SD card neither with odin. what am I doning wrong?why won't my pc recognise the phone? (even reinstalled windows and all the phones drivers also tried installing drivers with zadig, after reinstall of windows the phone was finally found there but still no luck for odin)
hey guys thanks I figured it all out I was using the wrong version of odin...got it all sorted now THANK YOU!!!
i have got strucked in startup screen on my galaxy ace(S5830) while installing cwm
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.
Hello guys, I'm new to android and I tried to root and is trying to install CynogenMod on an old Galaxy Ace.
I rooted it using a 'updated.zip' file by following an online guide and proceeded to install ClockworkMod.
After installing CWM and rebooting, I continued Cynogenmod . I realised that I cannot access the recovery menu(black screen). After failing many times, I reset the phone to factory settings and now the phone doesn't boot up.
However, I still can access download mode...
I there anyway to fix this ? Hope to get this phone fixed soon..
Nyctophilia said:
Hello guys, I'm new to android and I tried to root and is trying to install CynogenMod on an old Galaxy Ace.
I rooted it using a 'updated.zip' file by following an online guide and proceeded to install ClockworkMod.
After installing CWM and rebooting, I continued Cynogenmod . I realised that I cannot access the recovery menu(black screen). After failing many times, I reset the phone to factory settings and now the phone doesn't boot up.
However, I still can access download mode...
I there anyway to fix this ? Hope to get this phone fixed soon..
Click to expand...
Click to collapse
It's just a soft-brick so nothing to very about Since you can access the Download Mode, all you have to do is flash back the stock rom using odin. Now to unbrick your device, just use the following thread,
All Samsung Galaxy Ace S5830 Stock Firmwares (2.3.X) Ever Released
First download the required firmware for your region from the first post. Once you have done that, go to the link in the second post. Download all the files (usb drivers, odin and ops) except firmwares (which you have already downloaded from the first post) in the "Preparation" section. Now install the USB drivers and follow the "Single Firmware File Installation". Once you have finished flashing, go to stock recovery mod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace which you can install from stock recovery mode (always root first and then install CWM),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Once you have installed CWM, you can flash any custom rom. CM 11 (KitKat) roms usually need CWM 6 but there is one CM 11 rom name KitKat for All that works well with CWM 5. Do post the result. Hope I Helped
P.S. Always post such question in the Galaxy Ace S5830 Q/A section. Reported to FM to move to right section.
mahithm said:
It's just a soft-brick so nothing to very about Since you can access the Download Mode, all you have to do is flash back the stock rom using odin. Now to unbrick your device, just use the following thread,
All Samsung Galaxy Ace S5830 Stock Firmwares (2.3.X) Ever Released
First download the required firmware for your region from the first post. Once you have done that, go to the link in the second post. Download all the files (usb drivers, odin and ops) except firmwares (which you have already downloaded from the first post) in the "Preparation" section. Now install the USB drivers and follow the "Single Firmware File Installation". Once you have finished flashing, go to stock recovery mod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace which you can install from stock recovery mode (always root first and then install CWM),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Once you have installed CWM, you can flash any custom rom. CM 11 (KitKat) roms usually need CWM 6 but there is one CM 11 rom name KitKat for All that works well with CWM 5. Do post the result. Hope I Helped
P.S. Always post such question in the Galaxy Ace S5830 Q/A section. Reported to FM to move to right section.
Click to expand...
Click to collapse
Hey thanks for the quick reply :good::laugh: Any idea why windows doesn't detect the USB driver for the phone even when i've installed the driver ? It says "device failed enumeration" at the device manager screen
Nyctophilia said:
Hey thanks for the quick reply :good::laugh: Any idea why windows doesn't detect the USB driver for the phone even when i've installed the driver ? It says "device failed enumeration" at the device manager screen
Click to expand...
Click to collapse
Can you tell me which version of Windows you are using now? Also try uninstalling the drivers and then reinstall it again. See if it works. Do post the result.
mahithm said:
Can you tell me which version of Windows you are using now? Also try uninstalling the drivers and then reinstall it again. See if it works. Do post the result.
Click to expand...
Click to collapse
I'm using Windows 8.1 x64bit. Tried uninstalling and reinstalling yet its still not working.:crying:
Nyctophilia said:
I'm using Windows 8.1 x64bit. Tried uninstalling and reinstalling yet its still not working.:crying:
Click to expand...
Click to collapse
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
mahithm said:
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
Click to expand...
Click to collapse
I will try it on a windows 7 pc soon. And thanks again for the help
mahithm said:
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
Click to expand...
Click to collapse
Hey, after trying the steps you provided on a windows 7 pc, it worked ! Really thank you soooooo much for helping me Didn't know that it was that easy to do that
Nyctophilia said:
Hey, after trying the steps you provided on a windows 7 pc, it worked ! Really thank you soooooo much for helping me Didn't know that it was that easy to do that
Click to expand...
Click to collapse
Glad I could help buddy