Hello guys, I'm new to android and I tried to root and is trying to install CynogenMod on an old Galaxy Ace.
I rooted it using a 'updated.zip' file by following an online guide and proceeded to install ClockworkMod.
After installing CWM and rebooting, I continued Cynogenmod . I realised that I cannot access the recovery menu(black screen). After failing many times, I reset the phone to factory settings and now the phone doesn't boot up.
However, I still can access download mode...
I there anyway to fix this ? Hope to get this phone fixed soon..
Nyctophilia said:
Hello guys, I'm new to android and I tried to root and is trying to install CynogenMod on an old Galaxy Ace.
I rooted it using a 'updated.zip' file by following an online guide and proceeded to install ClockworkMod.
After installing CWM and rebooting, I continued Cynogenmod . I realised that I cannot access the recovery menu(black screen). After failing many times, I reset the phone to factory settings and now the phone doesn't boot up.
However, I still can access download mode...
I there anyway to fix this ? Hope to get this phone fixed soon..
Click to expand...
Click to collapse
It's just a soft-brick so nothing to very about Since you can access the Download Mode, all you have to do is flash back the stock rom using odin. Now to unbrick your device, just use the following thread,
All Samsung Galaxy Ace S5830 Stock Firmwares (2.3.X) Ever Released
First download the required firmware for your region from the first post. Once you have done that, go to the link in the second post. Download all the files (usb drivers, odin and ops) except firmwares (which you have already downloaded from the first post) in the "Preparation" section. Now install the USB drivers and follow the "Single Firmware File Installation". Once you have finished flashing, go to stock recovery mod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace which you can install from stock recovery mode (always root first and then install CWM),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Once you have installed CWM, you can flash any custom rom. CM 11 (KitKat) roms usually need CWM 6 but there is one CM 11 rom name KitKat for All that works well with CWM 5. Do post the result. Hope I Helped
P.S. Always post such question in the Galaxy Ace S5830 Q/A section. Reported to FM to move to right section.
mahithm said:
It's just a soft-brick so nothing to very about Since you can access the Download Mode, all you have to do is flash back the stock rom using odin. Now to unbrick your device, just use the following thread,
All Samsung Galaxy Ace S5830 Stock Firmwares (2.3.X) Ever Released
First download the required firmware for your region from the first post. Once you have done that, go to the link in the second post. Download all the files (usb drivers, odin and ops) except firmwares (which you have already downloaded from the first post) in the "Preparation" section. Now install the USB drivers and follow the "Single Firmware File Installation". Once you have finished flashing, go to stock recovery mod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace which you can install from stock recovery mode (always root first and then install CWM),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Once you have installed CWM, you can flash any custom rom. CM 11 (KitKat) roms usually need CWM 6 but there is one CM 11 rom name KitKat for All that works well with CWM 5. Do post the result. Hope I Helped
P.S. Always post such question in the Galaxy Ace S5830 Q/A section. Reported to FM to move to right section.
Click to expand...
Click to collapse
Hey thanks for the quick reply :good::laugh: Any idea why windows doesn't detect the USB driver for the phone even when i've installed the driver ? It says "device failed enumeration" at the device manager screen
Nyctophilia said:
Hey thanks for the quick reply :good::laugh: Any idea why windows doesn't detect the USB driver for the phone even when i've installed the driver ? It says "device failed enumeration" at the device manager screen
Click to expand...
Click to collapse
Can you tell me which version of Windows you are using now? Also try uninstalling the drivers and then reinstall it again. See if it works. Do post the result.
mahithm said:
Can you tell me which version of Windows you are using now? Also try uninstalling the drivers and then reinstall it again. See if it works. Do post the result.
Click to expand...
Click to collapse
I'm using Windows 8.1 x64bit. Tried uninstalling and reinstalling yet its still not working.:crying:
Nyctophilia said:
I'm using Windows 8.1 x64bit. Tried uninstalling and reinstalling yet its still not working.:crying:
Click to expand...
Click to collapse
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
mahithm said:
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
Click to expand...
Click to collapse
I will try it on a windows 7 pc soon. And thanks again for the help
mahithm said:
Sadly Samsung drivers and odin doesn't work well on Windows 8 atleast for Galaxy Ace. Try flashing stock rom from a Windows XP or 7 pc. It should work. Hope I Helped
Click to expand...
Click to collapse
Hey, after trying the steps you provided on a windows 7 pc, it worked ! Really thank you soooooo much for helping me Didn't know that it was that easy to do that
Nyctophilia said:
Hey, after trying the steps you provided on a windows 7 pc, it worked ! Really thank you soooooo much for helping me Didn't know that it was that easy to do that
Click to expand...
Click to collapse
Glad I could help buddy
Related
*NOTICE* Samsung Galaxy GT-5570i mistake in title :S
Hi
Okay so the problem is my Samsung galaxy mini doesnt get detected by Odin v.4.85 but it gets detected in v.1.85. I've tried restarting the phone many times. All settings are set in the "Application" and USB debugg. All usb drivers are installed 100% with Samsung Kies.
Also tried reinstaling the drivers and other versions it still didnt work. Its 100% not the USB cable cuz it works perfectly fine when out of download mode and Kies recognizes the device.
I've tried rooting it with SuperOneClick also , that one gets stuck on one line...I've also tried through recovery mode but it didnt work either i got error, and interrupted.
Also a question : Is it possible to get clockworkmod and root without using Odin?
In any case theese info are needed:Android version is 2.3.6(i did not install this one it came with the phone) , Baseband version 25570IXXKL4, Kernel Version 2.6.35.7([email protected] #1), Build Number GINGERBREAD.IXXKL4
Looking forward to your answers
~Riste
http://forum.xda-developers.com/showthread.php?t=1576202
please go to above link and try that
Its okay i've rooted the phone now thank you guys...But now i have trouble getting clockworkmode... Any ideas :S?
ristex1 said:
Its okay i've rooted the phone now thank you guys...But now i have trouble getting clockworkmode... Any ideas :S?
Click to expand...
Click to collapse
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1567101
kitrax59 said:
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1567101
Click to expand...
Click to collapse
I've tried that one. But when i update from Android Recovery mode it enters CWM but after i try to apply the update it gives me error because such file or directory doesn't exist. So its same as i dont have cwm :S
~Riste
You dont og to flash update!!!
Go in CWM and install zip from sd-card.
ristex1 said:
I've tried that one. But when i update from Android Recovery mode it enters CWM but after i try to apply the update it gives me error because such file or directory doesn't exist. So its same as i dont have cwm :S
~Riste
Click to expand...
Click to collapse
Make sure the zip is downloaded properly.
Also choose install from SD card option not, apply update from SD.
i had the same problem while rooting it was due to version of android ex: 2.2FROYO , 2.3GINGERBREAD
i had 2.2 froyo stock and was trying the method of rooting 2.3GB .. now take a look at video and let know if it helps im sure it'll help.
http://www.youtube.com/watch?v=VQ4r9N0uMrU&feature=BFa&list=PLB7A7385718D23F15&lf=plpp_video
royalasif said:
i had the same problem while rooting it was due to version of android ex: 2.2FROYO , 2.3GINGERBREAD
i had 2.2 froyo stock and was trying the method of rooting 2.3GB .. now take a look at video and let know if it helps im sure it'll help.
v=VQ4r9N0uMrU&feature=BFa&list=PLB7A7385718D23F15&lf=plpp_video[/url]
Click to expand...
Click to collapse
That wouldn't help because my phone came with gengerbread 2.3.6 :S
freakyfriday said:
Make sure the zip is downloaded properly.
Also choose install from SD card option not, apply update from SD.
Click to expand...
Click to collapse
Did that also, it doesn't work...
ristex1 said:
That wouldn't help because my phone came with gengerbread 2.3.6 :S
Did that also, it doesn't work...
Click to expand...
Click to collapse
Well if your phone runs gingerbread 2.3.6 try this it shoul solve the problem
Link: http://forum.xda-developers.com/showthread.php?t=1576202
That must work read the instructions carefully.
<THOR> said:
You have try to use the update.zip and flash from recovery for get the root?
Click to expand...
Click to collapse
This method works and it's super easy to do.
<THOR> said:
@ristex1
I not have understand if you have rooted or not? if not, before of flash from recovery you must rename the package zip for rooting in update.zip or upd_1.zip (this should be right for your firmware) and then go in recovery and do apply update from sdcard and should works, if not if you not rename the package not works.
Click to expand...
Click to collapse
Yes i rooted the phone. Thank to that universal root zip.
But now in order to install Custom ROM's i need clockworkmod. I've been searching for days bricked my phone twice and still couldnt find any working cwm FOR SAMSUNG GT S5570I becouse this one and the GT s 5570 use diferent system...Thats what i learnt so far:S
~Best regards Riste!
Hi,
Well i was trying to rooting up my phone for trying out Cynogenmod 9 (ICS 4.0) .....
The files i transferred to the sd card :
1.) recovery-clockwork-5.0.2.6-galaxyace-fix
2.) upd_1
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
1.) http://forum.xda-developers.com/showthread.php?t=1034145
2.) http://forum.xda-developers.com/showthread.php?t=1552695
I'll appreciate any help regarding my boot loop problem.....
Thanks & Regards
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Same problem
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Prawesome said:
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Click to expand...
Click to collapse
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
kerrywez said:
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Click to expand...
Click to collapse
Boot into recovery and wipe data.
Make a wipe in standart or full wipe in custom and flash again with odin! It will surely help
Doo:DAce said:
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
Boot into recovery and wipe data.
Click to expand...
Click to collapse
Seems like it...Anyway,I dont think the OP even comes here now
I too have this problem!
Is the phone bricked? I have tried using packages from Odin and One Click Unbrik but they both fail, I can get into download mode, but I cannot get into recovery mode. It just says ARM9 or something whenever I try. Is there a solution yet?
i fixed my phone i kept on having boot loops after falshing single packing so i turned the phone off then hold power and home till you come to recovery option wipe cache and i think its factory reset or full wipe so do both wipes then reboot phone WALA my phone was working hope this helps and dont forget to tick thanks button :good:
boot loop with other issues too...
hi there guys. I'm new to this forum and also to flashing...
but anyways I had a good look before flashing my phone but still messed it up...silly me
I tried rooting my phone via SD card(first clockwork mod ace 4 followed by clockwork mod 5 as said in tutorial) then upd_1 and then cm9. But after installing clockwork mod ace 4 I get :" E: failed to mount/ system (invalid argument)" same happens when trying to wipe cache partition/ data/ factory reset.
I can get into android system recovery no problems and also into odin download mode (where it gives you the warning and prompts you to press volume up if you still want to continue. It is also stuck on the samsung screen if I don't press anything.
But when trying to connect the phone to odin in order to rectify what I've done (with the one package methode, either gingerbread or cmw9) odin won't detect my phone. I used several different cables, original samsung cables, changed usb ports (directly off the motherboard) but to no avail.
heimdall will recognise the phone as far as I can see (when you click on detect device it says: "device detected") but I cannot find the right files I need to use for heimdall. I would very much appreciate any help and advice. Please point me in the right direction, show me where to download the correct files and which ones and please bear in mind I'm a noob. put it as plain as bread for me please :good:
just flash clockworkmod 5 and format system and data...
do a complete wipe ...clear cache,, wipe dalvik
then mount system and data and install any of ur modded stock or cm7... enjoy
---------- Post added at 08:48 PM ---------- Previous post was at 08:47 PM ----------
many roms are pre rooted plus u dont need rooot access to flash rom
to flash CustomROM u dont need to root first our ace simply flash CWM 5 and put your CustomROM flashable .zip to your sdcard and then fullwipe (data,cache,advantage) and done.....
most of CustomROM now can directly flash from previous or Other CustomROM without flash to StockROM first..
CMIIW
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
hey, well I did what you said but when I do so it just comes up with installation aborted...same as with everything else I try to install from SD card...
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
AaronvAce said:
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I won't question what you guys are saying since I'm a noob but the tutorial I followed specifically told me to do that. I just get installation aborted every time I try to install recovery clockwork 5...or anything else for that matter. thanks for your help guys
maybe this will give you a better picture of my predicament...
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
val1607 said:
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
Click to expand...
Click to collapse
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
dxppxd said:
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
Click to expand...
Click to collapse
lol as if I didn't already find out... but what can I do now? apparently there is no custom mod for the 5830i in ICS or jelly bean.cannot flash a new rom from SD card neither with odin. what am I doning wrong?why won't my pc recognise the phone? (even reinstalled windows and all the phones drivers also tried installing drivers with zadig, after reinstall of windows the phone was finally found there but still no luck for odin)
hey guys thanks I figured it all out I was using the wrong version of odin...got it all sorted now THANK YOU!!!
i have got strucked in startup screen on my galaxy ace(S5830) while installing cwm
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
Hi,
help me!
i flashed my friends non-rooted Galaxy Ace s5830 with custom rom with stock recovery.
its stucked at samsung logo. i try to connect it with kies at downloading mode after that,
the kies just stay in connecting forever after. odin also wont detect my phone.
i'm using win8 and disabled the driver signature. still no reaction.
help me pls. it bricked and stucked at samsung logo forever after.
anyway to flashed it back using stock recovery?
or doing something to make it to factory setting?
Simple just install cem recovery, wipae data cache dalvik-cache frmat system install the same ROM. Done
Sent from my GT-S5830 using xda premium
idlanamran said:
Hi,
help me!
i flashed my friends non-rooted Galaxy Ace s5830 with custom rom with stock recovery.
its stucked at samsung logo. i try to connect it with kies at downloading mode after that,
the kies just stay in connecting forever after. odin also wont detect my phone.
i'm using win8 and disabled the driver signature. still no reaction.
help me pls. it bricked and stucked at samsung logo forever after.
anyway to flashed it back using stock recovery?
or doing something to make it to factory setting?
Click to expand...
Click to collapse
How did you got that? :cyclops: update?
If you dont want to do what tomorrowland said, and if your PC recognizes the phone, you can install stock rom with ODIN, get everything as it where and then flash custom rom, see here " C. Flashing the newest firmware"
Try to read in forum how to flash custom rom's with CWM
Hope I helped
Install drivers.
adb.exe reboot recovery. wipe everything.
Hello everybody,
I've tried to install cyanogenMod for my Samsung Galaxy Mini (not the "I" edition). So I've copied the rom inside an external sdcard(renaming it to update.zip) and tried to install.
After reboot, my mobile stuck at "Samsung" logo. Odin and Windows detects my phone but doesn' recognise my phone in the downloading mode (even with samsung mobile drivers+no kies installed).
I have a "Recovery Mod for Bml" .
I've tried to install clockwordMod Recovery via this "Recovery" after the issue happened. I've tried another Rom but no success.
Help pleaaase!!
Thanks
makertoo said:
Hello everybody,
I've tried to install cyanogenMod for my Samsung Galaxy Mini (not the "I" edition). So I've copied the rom inside an external sdcard(renaming it to update.zip) and tried to install.
After reboot, my mobile stuck at "Samsung" logo. Odin and Windows detects my phone but doesn' recognise my phone in the downloading mode (even with samsung mobile drivers+no kies installed).
I have a "Recovery Mod for Bml" .
I've tried to install clockwordMod Recovery via this "Recovery" after the issue happened. I've tried another Rom but no success.
Help pleaaase!!
Thanks
Click to expand...
Click to collapse
maybe you flashed a mini 2 rom on your mini , can you do a factory reset of your device with your current recovery ? after that just flash an auther cm rom for your device , i dont know if you can flash stock from your recovery , did you make a nandroid backup ?
Sent from my GT-S6500D using XDA Free mobile app
makertoo said:
Hello everybody,
I've tried to install cyanogenMod for my Samsung Galaxy Mini (not the "I" edition). So I've copied the rom inside an external sdcard(renaming it to update.zip) and tried to install.
After reboot, my mobile stuck at "Samsung" logo. Odin and Windows detects my phone but doesn' recognise my phone in the downloading mode (even with samsung mobile drivers+no kies installed).
I have a "Recovery Mod for Bml" .
I've tried to install clockwordMod Recovery via this "Recovery" after the issue happened. I've tried another Rom but no success.
Help pleaaase!!
Thanks
Click to expand...
Click to collapse
wipe data, then reboot !
I've already tried to wipe data and doesn't work.
makertoo said:
I've already tried to wipe data and doesn't work.
Click to expand...
Click to collapse
install cm9, is stable for use
do you have min 2 or mini 1 ?
Sent from my GT-S6500D using XDA Free mobile app
pocthird said:
do you have min 2 or mini 1 ?
Sent from my GT-S6500D using XDA Free mobile app
Click to expand...
Click to collapse
I have the mini 1 :samsung mini s5770.
Forum Administrator here?
makertoo said:
I have the mini 1 :samsung mini s5770.
Click to expand...
Click to collapse
SO, WHY YOU POSTED ON S6500 (GALAXY MINI 2 !) Q/A FORUM ?
Reported!
makertoo said:
Hello everybody,
I've tried to install cyanogenMod for my Samsung Galaxy Mini (not the "I" edition). So I've copied the rom inside an external sdcard(renaming it to update.zip) and tried to install.
After reboot, my mobile stuck at "Samsung" logo. Odin and Windows detects my phone but doesn' recognise my phone in the downloading mode (even with samsung mobile drivers+no kies installed).
I have a "Recovery Mod for Bml" .
I've tried to install clockwordMod Recovery via this "Recovery" after the issue happened. I've tried another Rom but no success.
Help pleaaase!!
Thanks
Click to expand...
Click to collapse
In clockworkmode, there is the option "update.zip". That is not for your Rom file but to root your phone with Superuser.
To flash ROM file, do as instructed in Thread by op . i.e. the thread maker.
Doing other steps by avoiding the instructions, you may face this problem.
and if you want to go back to your stock rom, go here:
http://forum.xda-developers.com/showpost.php?p=53075075&postcount=4
makertoo said:
Hello everybody,
I've tried to install cyanogenMod for my Samsung Galaxy Mini (not the "I" edition). So I've copied the rom inside an external sdcard(renaming it to update.zip) and tried to install.
After reboot, my mobile stuck at "Samsung" logo. Odin and Windows detects my phone but doesn' recognise my phone in the downloading mode (even with samsung mobile drivers+no kies installed).
I have a "Recovery Mod for Bml" .
I've tried to install clockwordMod Recovery via this "Recovery" after the issue happened. I've tried another Rom but no success.
Help pleaaase!!
Thanks
Click to expand...
Click to collapse
So, you're using ClockWork Mod ? If so did you follow this rule of flashing :
- Copy zip
- Install zip
- Wipe data
- Wipe cache
- Reboot
Also, make sure that you're running Gingerbread, Froyo tend to make custom ROM stopped working.
#F4UZAN : Team Optima
MaDaLiNoSt said:
SO, WHY YOU POSTED ON S6500 (GALAXY MINI 2 !) Q/A FORUM ?
Reported!
Click to expand...
Click to collapse
Hello, you are the one in wrong section. This is galaxy mini q/a section.
Sent from my GT-S5570 using xda premium
Venkatesh said:
Hello, you are the one in wrong section. This is galaxy mini q/a section.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
HELLLLOOOOOOO!!!!!!!! This post have been moved from sgm2 forum to mini at my request!
Hy,
I just want you to know that I solved my problem. I used a Windows 7 session and the computer/odin/windows recognized my download mode. (Win 8.1: go hell!)
Anyway, you know the reste of the story. Thanks
While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.
Check the usb cable
Sent from my ST25i using Tapatalk
Don't flash stock recovery(I guess there isn't any ). So, try flashing stock firmware via Odin. Use correct name of ops file : COOPER_v1.0.ops & Odin straightaway displays the model name in its title bar even if the phone isn't physically connected to PC via USB cable.
Use Odin v4.42 atleast.
& pls. never flash stock firmware directly over any jellybean rom. First flash any stable CM7 rom & then u r good to go
Hope this helps...!!
nazmul99 said:
While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.
Click to expand...
Click to collapse
When your phone is not detected by odin, it's usually the driver's. Just follow this link,
How to Install Stock ROM on Galaxy Ace Using Odin [GT-S5830]
Go to the "Preparation" section and download all the necessary files. Re-install the drivers again and check if odin detects it. Do post the result. Hope I Helped
I think Cable is OK, because mass storage mode is working with that cable.But when in download mode, PC saying Mulfunctioned device.
I have put ops file, showing my model number. But whenever I click on start. Its saying to connect the device first.
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Are you able to go to Recovery Mode? If yes, then try installing any CM7 custom rom. Make sure to do "Wipe data/ factory reset", "Wipe cache partition", Mounts & Storage> Format /system, Advanced> "Wipe Dalvik cache" before you flash a custom rom. Do post the result. Hope I Helped
---------- Post added at 03:35 PM ---------- Previous post was at 03:24 PM ----------
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Is the pacman rom working normally?
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Can u show us the error screen?:sly:
Unable to install CM7. But CM9(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.
nazmul99 said:
Unable to install CM7. But CM11(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.
Click to expand...
Click to collapse
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped
mahithm said:
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped
Click to expand...
Click to collapse
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.
nazmul99 said:
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.
Click to expand...
Click to collapse
No problem I hope this works for you :fingers-crossed:
Thank You
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:
nazmul99 said:
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:
Click to expand...
Click to collapse
Glad to hear it worked buddy