Database Develop

[Q] Switching from GP rom to Sense.

Dear people of XDA,
I've had my HTC One for a few months now and I must say I'm really enjoying it. I switched right after I got it to the GP rom, mainly because I didn't like the flipboard homescreen from Sense. But I've changed my mind, and I want to go back. But there's a small problem.
I'm not really great when it comes to installing ROM and stuff like that, so consider me a total noob. Alright, I'll get to the problem.
I can't flash another ROM. Why, you may ask, well that's because I can't enter recovery mode. It gives me an Android logo with a red triangle with a "!" in it. Well, I thought I'd have to flash a custom recovery then, so I tried that. But then again, the problem is my bootloader is (re)locked. Unlocking doesn't work, I've tried HTCdev, and Revone, but it doesn't work.
Now while trying that stuff, I've noticed a little red line in fastboot which wasn't there before. This is what it says:
Code:
[COLOR="Red"]OS-3.62.1700.1 (4.19.401.11)[/COLOR]
Not sure what that means and if it's important, because the phone boots as it always has.
So basically, I need to unlock my bootloader, to flash recovery, to install a new ROM. Can anyone help me figure this out?
Thanks in advance,
Derk

Bump, I was hoping to get some help! Please anyone?

52245256 309
Bumperino, I need help ASAP! Please!

Derk One said:
Now while trying that stuff, I've noticed a little red line in fastboot which wasn't there before. This is what it says:
Code:
[COLOR="Red"]OS-3.62.1700.1 (4.19.401.11)[/COLOR]
Not sure what that means and if it's important, because the phone boots as it always has.
Click to expand...
Click to collapse
that means you were updating firmware from 3.62.1700.1 to 4.19.401.11, BUT you didnt do the second flash!! so it's in limbo
fastboot rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip <- you forgot to do this again
fastboot reboot-bootloader
are you S-On or S-Off, please post a "fastboot getvar all" excluding IMEI and s/n

Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: <randomnr>
(bootloader) imei: <randomnr>
(bootloader) meid: <randomnr>
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4321mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
That's the getvar all.
And I'm S-on. That's one of my main problems, I can't get s-off, with HTCdev, moonshine, rumrunner, revone, firewater.... I've tried them all, but none would get me s-off. @nkk71

Derk One said:
Code:
fastboot getvar all
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
[B](bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
[/B]finished. total time: 0.038s
That's the getvar all.
And I'm S-on. That's one of my main problems, I can't get s-off, with HTCdev, moonshine, rumrunner, revone, firewater.... I've tried them all, but none would get me s-off. @nkk71
Click to expand...
Click to collapse
Looks like a converted Sense to GPE edition phone? you should not have gone S-On!!
Since you're firmware is in limbo, you can flash signed firmware from here: http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
Code:
[B]modelid: PN0710000[/B]
cidnum: HTC__001
cidnum: HTC__J15
[B]cidnum: HTC__E11[/B]
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
I would recommend you try 4.19.401.9 not .11 because it's more complete:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then try to get a new unlock token from HTCdev, and hope you can get your phone unlocked!!

I'm on it! Thanks for your help, I'll let you know ASAP if HTCdev unlocking works.

Derk One said:
I'm on it! Thanks for your help, I'll let you know ASAP if HTCdev unlocking works.
Click to expand...
Click to collapse
Good luck :fingers-crossed:

nkk71 said:
Good luck :fingers-crossed:
Click to expand...
Click to collapse
I've got the red OS thing away, but HTCdev still doesn't work. I can get the unlock code.bin from the email I get, but when I flash it, it said it's completed but my phones doesn't do anything.
Code:
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.003s]
finished. total time: 0.144s
Yet nothing happens on my phone. @nkk71

Derk One said:
I've got the red OS thing away, but HTCdev still doesn't work. I can get the unlock code.bin from the email I get, but when I flash it, it said it's completed but my phones doesn't do anything.
Code:
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.003s]
finished. total time: 0.144s
Yet nothing happens on my phone. @nkk71
Click to expand...
Click to collapse
yeah that's not good
try doing a factory reset in stock recovery (use POWER + VOLUP to get to the menu in stock recovery), then get a new token again, and hope for the best
that's the problem when you go S-On, you pretty much f^ up yourself

nkk71 said:
yeah that's not good
try doing a factory reset in stock recovery (use POWER + VOLUP to get to the menu in stock recovery), then get a new token again, and hope for the best
that's the problem when you go S-On, you pretty much f^ up yourself
Click to expand...
Click to collapse
I can't get into recovery mode. When I enter it, I see the HTC One phone with a triangle with a "!" in it. Any fix on that? @nkk71

Derk One said:
I can't get into recovery mode. When I enter it, I see the HTC One phone with a triangle with a "!" in it. Any fix on that? @nkk71
Click to expand...
Click to collapse
yeah that's stock recovery, now briefly press POWER + VOLUP to get the menu (you may have to try a couple of times to get the timing right

nkk71 said:
yeah that's stock recovery, now briefly press POWER + VOLUP to get the menu (you may have to try a couple of times to get the timing right
Click to expand...
Click to collapse
When I press VOLUP and powerbutton, the Google logo appears, takes a while and goes to a black screen. Then the stock recovery shops up. Did I flash it like I should?
@nkk71

Derk One said:
When I press VOLUP and powerbutton, the Google logo appears, takes a while and goes to a black screen. Then the stock recovery shops up. Did I flash it like I should?
@nkk71
Click to expand...
Click to collapse
looks like you have a "hybrid" (Sense/GPE) version at the moment!!
Oh just found this:
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
so it's RUU time!!
Good luck.

nkk71 said:
looks like you have a "hybrid" (Sense/GPE) version at the moment!!
Oh just found this:
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
so it's RUU time!!
Good luck.
Click to expand...
Click to collapse
Haha, when I screw something up, I do it good. Ugh, 1,5GB takes about 5 hours to download, so I'll report back to you when I've tried that.
Thanks in advance!

Alright I'm back. I've got it downloaded but I ran against another problem; the RUU doesn't work correctly.
Whenever I open it asks me to accept the license agreement, I check the 'yes', and press continue. Then nothing happens. Like, the RUU program closes and it's gone.
I've checked if the file is complete and it is, checked md5, also correct. Ugh, why do I always run into so many problem. *cries*
@nkk71

Derk One said:
Alright I'm back. I've got it downloaded but I ran against another problem; the RUU doesn't work correctly.
Whenever I open it asks me to accept the license agreement, I check the 'yes', and press continue. Then nothing happens. Like, the RUU program closes and it's gone.
I've checked if the file is complete and it is, checked md5, also correct. Ugh, why do I always run into so many problem. *cries*
@nkk71
Click to expand...
Click to collapse
hmm
i guess you could take the signed ROM.ZIP from the temp folder, and try flashing it using fastboot, that would show more details

Temp folder? @nkk71

Derk One said:
Temp folder? @nkk71
Click to expand...
Click to collapse
you don't like to make things easy, do you
send me a PM when you are online (probably tomorrow afternoon/evening), and better get teamviewer ready too
---------- Post added at 11:25 PM ---------- Previous post was at 11:13 PM ----------
Derk One said:
Temp folder? @nkk71
Click to expand...
Click to collapse
PS: can you upload that file somewhere else, looks like androidruu is giving me a hard time too... dont wanna wait 36 hours+ to be able to just look at the file.

My upload speed is approx. 10 kb/second. Would take like 16 years to successfully upload. @nkk71

[SOLVED] REQUEST how to unroot htc one full stock

Am s-off and I need to get back to stock for warrenty
device CID HTC__J15
emirates UAE
cant find correct RUU
raido 4A.25.3263.21 DONT know if it was modified but i did not modified any radio or CID before
if rom installation changes it i dont know im noob
hboot 1.56.0000 modified for no red warning
read a thread says this is the RUU for middle east is it right is it safe to use older RUU to restore am really new to this
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in samsung i only need odin and stock Rom Here is a whole different situation

Iloudsan said:
Am s-off and I need to get back to stock for warrenty
device CID HTC__J15
emirates UAE
cant find correct RUU
raido 4A.25.3263.21 DONT know if it was modified but i did not modified any radio or CID before
if rom installation changes it i dont know im noob
hboot 1.56.0000 modified for no red warning
read a thread says this is the RUU for middle east is it right is it safe to use older RUU to restore am really new to this
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in samsung i only need odin and stock Rom Here is a whole different situation
Click to expand...
Click to collapse
post the output of "fastboot getvar all" except imei and serialno
yes you can safely apply an older ruu if you have s-off, but first lets be sure if its the right one for your phone with the "fastboot getvar all"
also post a picture of your bootloader screen.

alray said:
post the output of "fastboot getvar all" except imei and serialno
yes you can safely apply an older ruu if you have s-off, but first lets be sure if its the right one for your phone with the "fastboot getvar all"
also post a picture of your bootloader screen.
Click to expand...
Click to collapse
------------------------------------------------------------
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH Deleted it for safety
(bootloader) imei: Deleted it for safety
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
----------------------------------------
is it ok to flash RUU with modded Hboot while in s-off
im scared of doing anything Wrong
BOOTLOADER
-------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dont know why the OS does not show Up
this the file name of the modded hboot
mod_hboot_1.56.0000_M7_4.19.401.11.zip
does RUU install stock hboot???
do i need to restore stock frimware or Hboot before proceeding to RUU installation
is this the file i need http://www.androidfilehost.com/?fid=23329332407579952
ok i took the risk and flashed the RUU my device is now not tempered
but the i dont get the red warning while booting is this means that the hboot did not restored?

Iloudsan said:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
Click to expand...
Click to collapse
Do you need to S-On?
EDIT: check my guide http://forum.xda-developers.com/showthread.php?t=2541082
use RUU.ZIP method (post #1, #2, and #4) using the 1.28.401.7 RUU.ZIP from guru
or AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
S-On/S-Off is your decision, but you should definitely set it LOCKED (not relocked) and untampered.

nkk71 said:
Do you need to S-On?
EDIT: check my guide http://forum.xda-developers.com/showthread.php?t=2541082
use RUU.ZIP method (post #1, #2, and #4) using the 1.28.401.7 RUU.ZIP from guru
or AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
S-On/S-Off is your decision, but you should definitely set it LOCKED (not relocked) and untampered.
Click to expand...
Click to collapse
I used the ruu i posted and and then installed TWRP for Guru_Bootloader_Reset_1.0
and then accidentally installed root via Twrp
and when i use The RUU again it gives me error 158 image error and hw to get stock recovery after finishing from Guru_Bootloader_Reset_1.0
i think i will get stuck with the recovery at the end but know even the RUU is not installing now again what to do
i wish that i found your thread before i think you the one who will help me through this
and yes i need S-on for the warranty
downgraded hboot to 1.44 to avoid any problem
is RUU files can be used once???

Iloudsan said:
I used the ruu i posted and and then installed TWRP for Guru_Bootloader_Reset_1.0
and then accidentally installed root via Twrp
and when i use The RUU again it gives me error 158 image error and hw to get stock recovery after finishing from Guru_Bootloader_Reset_1.0
i think i will get stuck with the recovery at the end but know even the RUU is not installing now again what to do
i wish that i found your thread before i think you the one who will help me through this
and yes i need S-on for the warranty
downgraded hboot to 1.44 to avoid any problem
is RUU files can be used once???
Click to expand...
Click to collapse
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download

nkk71 said:
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download
Click to expand...
Click to collapse
yes im still S-off
but the RUU had worked once why is not working again ERROR 158
i am trying it now again
what im doing now is trying to get the device the way it was before the RUU running
maybe it wil work i hope it works

Iloudsan said:
yes im still S-off
but the RUU had worked once why is not working again ERROR 158
i am trying it now again
Click to expand...
Click to collapse
Check md5 first
Sent from my HTC One using Tapatalk

nkk71 said:
Check md5 first
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
how to ??
which application should i use
i dont have .md5 file
dont lnow what am saying

nkk71 said:
Check md5 first
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i got the RUU to work
before working with the RUU i used guru reset like in your thread
just now the RUU finished
and now waiting it to bootup
and confirm no tampered
locked
to s-on the device
thank you
dont leave me still in need for you
the only step left S-ON

nkk71 said:
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download
Click to expand...
Click to collapse
ok now im s-on no tampered and locked
is it good to go for warranty?
now am installing OTAs
you are amazing

Iloudsan said:
ok now im s-on no tampered and locked
is it good to go for warranty?
now am installing OTAs
you are amazing
Click to expand...
Click to collapse
yep it's good to send to warranty, why bother with OTAs, they'll probably update it for you anyway
and if all is good please mark the thread as [SOLVED]

nkk71 said:
yep it's good to send to warranty, why bother with OTAs, they'll probably update it for you anyway
and if all is good please mark the thread as [SOLVED]
Click to expand...
Click to collapse
Thank you.
Hoping to mark the thread now
Just one last question is the camera lens glass (cover) replaceable.
Is it under warranty or I should pay for it to be fixed
I don't know how the he'll did it broke

[q] q my htc one not entering recovery mode

HI ALL
MY HTC ONE AT&T UNLOCKED
MY HTC ONE hade a problem with battery
three days back i replace the battery but my device keep rebooting :crying:
i can enter bootloader menu but not revcovery
i try to flash boot.img from cmd its don completely but device same
i try to run ruu rom its don completely but device same
there on different in one case the htc screen come with wirning "This build is for development purposes only do not distribute outside of HTC without HTC's permission ..."
- Device details -
M7_UL PVT SHIP S-OFF RH
CID-CWS__001
HBOOT-1.55.0000
RADIO-4A.19.3263.13
openDSP-v31.120.274.0617
OS-3.17.502.3
eMMc-boot 2048MB
sep 10 2013,01:32:23.0
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3562mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
hope you can help guys
best regards

fastboot flash recovery recovery_name.img
fastboot erase cache

First off, remove your IMEI and Serial Number from the post above. That's sensitive information.
Second, normally the "Development Purpose" message should disappear once you flash back to stock with RUU. are you positive that flashing finished successfully?
Anyhow your problem should be solved - as BenPope has said - by reflashing your recovery. Just pick a suitable revocery image, enter Bootloader in FastbootUSB mode and give it a try:
Code:
fastboot flash recovery recovery_name.img
fastboot erase cache

i did this guys and my device still same

supermagic49 said:
i did this guys and my device still same
Click to expand...
Click to collapse
Which recovery exactly did you flash? Are you absolutely positive it was a suitable version for your device?
How by the way did you change the battery yourself? Did you disassemble the phone? If so you might perhaps have broken something?
Gesendet von meinem SM-T705 mit Tapatalk

- I had tried all recovery files CWS__001 in this link http://forum.xda-developers.com/showthread.php?t=2545227
- i changed battery in maintenance center but u think it can start bootloader accept flashing an there is something broken
do u advice to disassemble n see
regards

supermagic49 said:
- I had tried all recovery files CWS__001 in this link http://forum.xda-developers.com/showthread.php?t=2545227
Click to expand...
Click to collapse
Those are Stock Recoverys if I'm not mistaken. So even if you flashed those you wouldn't recognize any difference as they don't change anything compared to stock.
But first there's something else I oversaw. In your OP you stated your details. It seems you haven't yet unlocked your bootloader? Or did you just leave out that information? That would be the reason why flashing anything does not work - AT ALL.
Unlock your Bootloader (use seach, there are lots of tutorials on how to do that). Second, please don't temper with the boot.img right now. There is no reason for you to change or overwrite a working bootloader. In fact the chances are you would mess up things even more. So leave the boot.img alone for now.
My suggestion is:
- Unlock your Bootloader (with HTCDev)
- Flash a Custom Recovery (e.g. TWRP - http://forum.xda-developers.com/showthread.php?t=2173870)
- Take it from there. See if recovery works and if so, go ahead an flash a Custom ROM, a Nandroid Backup or get yourself S-OFF (Firewater or Rumrunner) and flash back a stock RUU.
RUUs can be a bit tricky with S-ON. So although you theoretically should be able to flash a (newer) RUU even with S-ON, you can make sure it works by being S-OFF first. SInce only then can you also downgrade your Device via RUU plus it then does not matter if you're locked / unlocked / relocked / tempered. Thing is you need a working Android to get S-OFF. That's why I suggested flashing a Custom ROM. Just about any suitable M7 ROM will do, for example: http://forum.xda-developers.com/showthread.php?t=2334294. Give it a try and tell me how it went, will you? Best of luck. But if you're unsure about anything, ask first. Don't mess things up even more

Ok nosmint
thnx for ur kind following
- my device is unlocked
-i flash one of the recovery u refer to with the order " fastboot flash boot" because "flash revocery" return to me with "remot no allowed"
-flash zip and flash recovery is not allowed i think if i clear this problem every thing will be fine
one more thing i open my device i found to cable not fixed i fix bu no changes
that,s the cable was not fixed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://i.ytimg.com/vi/S5KNmDeJ4Ww/maxresdefault.jpg

nosmint said:
... get yourself S-OFF (Firewater or Rumrunner) and flash back a stock RUU.
RUUs can be a bit tricky with S-ON.
Click to expand...
Click to collapse
the OP says:
(bootloader) version-misc: PVT SHIP S-OFF

nkk71 said:
the OP says:
(bootloader) version-misc: PVT SHIP S-OFF
Click to expand...
Click to collapse
Any advice dear

supermagic49 said:
Any advice dear
Click to expand...
Click to collapse
Well first of all please explain what your goal is.... do you want custom ROM, stock ROM, etc.
Second, we are talking about bootloader unlocked not SIM-unlocked, this
- my device is unlocked
-i flash one of the recovery u refer to with the order " fastboot flash boot" because "flash revocery" return to me with "remot no allowed"
Click to expand...
Click to collapse
indicates your bootloader is either LOCKED or RELOCKED
look at the first line of the attached screenshot.
So please explain what your goal is, and i'll try and help from there.

How can i clear the message of " remote not allowed so i can flash recovery
Regards

supermagic49 said:
How can i clear the message of " remote not allowed so i can flash recovery
Regards
Click to expand...
Click to collapse
you would need to unlock bootloader (it's pretty easy with S-Off), but please first tell us what you want to achieve

nkk71 said:
Well first of all please explain what your goal is.... do you want custom ROM, stock ROM, etc.
Second, we are talking about bootloader unlocked not SIM-unlocked, this
indicates your bootloader is either LOCKED or RELOCKED
look at the first line of the attached screenshot.
So please explain what your goal is, and i'll try and help from there.
Click to expand...
Click to collapse
Fine
my goal to see my device working with custom ROM or stock ROM
my bootloader unlocked i just forget to mention that

supermagic49 said:
Fine
my goal to see my device working with custom ROM or stock ROM
my bootloader unlocked i just forget to mention that
Click to expand...
Click to collapse
use this RUU: http://androidruu.com/getdownload.p...13_10.38j.1157.04_release_334235_signed_2.exe
that will wipe your phone completely and install stock ROM and firmware.

i had tried this too but no change

ruu info
When looking for ruu.exe I went through 6 or 7 different ones. 1 way to know if u have the right ruu is by searching your android and sense version also provider currently on your phone otherwise the ruu won't work s-off dosnt matter I never turned it off on my phone and still got the ruu to work

[Q] Not get update (Red Triangle)

I got htc one. --Relocked-s on-hboot 1.44-stock recovery-- I try download update but ı get red triangle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

real slim shady said:
I got htc one. --Relocked-s on-hboot 1.44-stock recovery-- I try download update but ı get red triangle
Click to expand...
Click to collapse
Read nkk71's post to find out the error description. Are you S-OFF and did you downgrade your hboot? If so, then you will need to upgrade your hboot to 1.54.

majmoz said:
Read nkk71's post to find out the error description. Are you S-OFF and did you downgrade your hboot? If so, then you will need to upgrade your hboot to 1.54.
Click to expand...
Click to collapse
how can ı upgrade my hboot?

real slim shady said:
how can ı upgrade my hboot?
Click to expand...
Click to collapse
Since you didn't downgrade it, the hboot is not the issue.
What is the error you are getting with the update? Here are some of the variables that the OTA checks.

majmoz said:
Since you didn't downgrade it, the hboot is not the issue.
What is the error you are getting with the update? Here are some of the variables that the OTA checks.
Click to expand...
Click to collapse
no error man. Just red triangle. I enter recovery and try manual setup update. and goes like this:
-apply from phone storage/sd card
-check cid failied
reboot then

real slim shady said:
no error man. Just red triangle. I enter recovery and try manual setup update. and goes like this:
-apply from phone storage/sd card
-check cid failied
reboot then
Click to expand...
Click to collapse
Can you provide a fastboot getvar all except remove the imei and serialno.

majmoz said:
Can you provide a fastboot getvar all except remove the imei and serialno.
Click to expand...
Click to collapse
how can ı do this? factory reset?

real slim shady said:
how can ı do this? factory reset?
Click to expand...
Click to collapse
Install the Minimal ADB and Fastboot Tool
When you get it installed run these commands one at a time with the phone connected to the PC:
Code:
[B][I]adb devices[/I][/B] <-- This should give you your "serial number device"
[B][I]adb reboot bootloader[/I][/B] <-- The phone will boot into bootloader and you will see [COLOR="Blue"]FASTBOOT USB[/COLOR]
[B][I]fastboot devices[/I][/B] <-- Same as adb devices
[B][I]fastboot getvar all[/I][/B] <-- Copy this info to your post but [COLOR="Red"]remove[/COLOR] the [U]imei[/U] and [U]serialno[/U] in the post

majmoz said:
Install the Minimal ADB and Fastboot Tool
When you get it installed run these commands one at a time with the phone connected to the PC:
Code:
[B][I]adb devices[/I][/B] <-- This should give you your "serial number device"
[B][I]adb reboot bootloader[/I][/B] <-- The phone will boot into bootloader and you will see [COLOR="Blue"]FASTBOOT USB[/COLOR]
[B][I]fastboot devices[/I][/B] <-- Same as adb devices
[B][I]fastboot getvar all[/I][/B] <-- Copy this info to your post but [COLOR="Red"]remove[/COLOR] the [U]imei[/U] and [U]serialno[/U] in the post
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.081s

real slim shady said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.081s
Click to expand...
Click to collapse
Let take a different tack. Download and install RUU 4.19.401.9. Scroll down the site until you find the RUU. This will be an update to your phone, once it is installed you will be able to get the Sense 6 update. Sorry for the delay, the other site for RUUs is down.

majmoz said:
Let take a different tack. Download and install RUU 4.19.401.9. Scroll down the site until you find the RUU. This will be an update to your phone, once it is installed you will be able to get the Sense 6 update. Sorry for the delay, the other site for RUUs is down.
Click to expand...
Click to collapse
ok ı download this. my internet speed is slow nowadays so this will be 1 hour.
whatever ı try setup update and when red triangle appears I hit volup+power. Lower yellow articles is:
Finding update package...
Bla bla bla (You may know those)
.
check /data/preload/SoundHound_Freemium.apk failed, error No
such file or directory()
installation aborted.
write host_mode:0 done

real slim shady said:
ok ı download this. my internet speed is slow nowadays so this will be 1 hour.
whatever ı try setup update and when red triangle appears I hit volup+power. Lower yellow articles is:
Finding update package...
Bla bla bla (You may know those)
.
check /data/preload/SoundHound_Freemium.apk failed, error No
such file or directory()
installation aborted.
write host_mode:0 done
Click to expand...
Click to collapse
you have this error because the bootloader is unlocked. unlocking the bootloader wipe all files in /data/preload so when the ota try to patch /data/preload/SoundHound_Freemium.apk it fail because the file no longer exist
restoring with a ruu will solve that issue.

alray said:
you have this error because the bootloader is unlocked. unlocking the bootloader wipe all files in /data/preload so when the ota try to patch /data/preload/SoundHound_Freemium.apk it fail because the file no longer exist
restoring with a ruu will solve that issue.
Click to expand...
Click to collapse
ok ı will do. But Tampered is a problem? Should ı remove it and if how?

real slim shady said:
ok ı will do. But Tampered is a problem? Should ı remove it and if how?
Click to expand...
Click to collapse
tampered is only an issue if you'll have to send the phone for repair under warranty. Otherwise don't worry with this. It can be removed but it require s-off.

alray said:
tampered is only an issue if you'll have to send the phone for repair under warranty. Otherwise don't worry with this. It can be removed but it require s-off.
Click to expand...
Click to collapse
Grey HTC logo appears on my phone , 1/5 update are setup
Error [158]: image error
ROM Update service cant update your phone.
Please get correct ROM Update service and try again. [I translate it, maybe in english little different]

real slim shady said:
Grey HTC logo appears on my phone , 1/5 update are setup
Error [158]: image error
ROM Update service cant update your phone.
Please get correct ROM Update service and try again. [I translate it, maybe in english little different]
Click to expand...
Click to collapse
try this ruu: http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe

alray said:
try this ruu: http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
Click to expand...
Click to collapse
ok but why this one? and should ı be s-off?

real slim shady said:
ok but why this one? and should ı be s-off?
Click to expand...
Click to collapse
its the same version of your phone and its a signed ruu so s-off is not required.

alray said:
its the same version of your phone and its a signed ruu so s-off is not required.
Click to expand...
Click to collapse
I ask for this http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
this site says s-off required

real slim shady said:
I ask for this http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
this site says s-off required
Click to expand...
Click to collapse
no, it says: You will need S-off to run the RUU if you have a higher firmware version on your phone currently

[SOLVED]Convert a "PVT MFG RH" M7 to a regular "PVT SHIP RH" M7

SOLVED - SEE POST #5 2)
I'm starting this thread for @Utz2006, he contacted me via PM since he couldn't post relevant pictures/links of his problem because of the 10 posts rule.
So here it goes:
'Standard' M7 with 4.4.3 (bought like this) -
Whatever I tried so far didn't work, system updates from htc don't install, unlocking with unlock_token results in "remote: partion does not exist" . Strangely enough the 'Device serial number' is composed of 12 zeros...etc etc - I have attached some pictures with the basic info...any help and pointers in the right direction will be appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards Utz
The pictures are also in my profile album...
Kind regards
Utz
Click to expand...
Click to collapse
First thing that is really interesting is the bootloader picture showing "M7_UL PVT MFG RH" instead of "M7_UL PVT SHIP RH". MFG afaik stands for Manufacturing.... You probably got your hands on a test unit, I guess that phone wasn't supposed to be sold on the market
2nd, the Hboot version is 1.55.1. Never seen this hboot version before, we all know 1.55 but 1.55.1 ? Also really strange to see the MID written on the same line just after the hboot version.. Probably related to the PVT MFG thing.
I don't know if your bootloader unlocking problem is because the phone being a PVT MFG instead of a regular PVT SHIP version or because something else. Can you be more precise about system updates? They are not installing or updates are not detected at all? Any error message/code when trying to install an update?
Would like to see your output of "fastboot getvar all" first. Also make sure that only your M7 is detected by fastboot using the "fastboot devices" command. Maybe its trying to send the Unlock_code.bin to another device (if fastboot detects more than one).

Well...it's detecting the updates (actually pestering me all the time to download it) but neither the ota nor the ruu versions install...downloading works, but installing stops somewhere and just goes back to the installed version (not that I am particularly interested in the stock version). Maybe it doesn't work with the developer version...? I also got a reply from Hansoon stating that the bootloader IS unlocked and has s=off. So the next step is trying to flash a custom recovery...when I bought the phone it said actually something about 'refurbished test unit'...which at that time didn't mean anything to me ...

Utz2006 said:
Well...it's detecting the updates (actually pestering me all the time to download it) but neither the ota nor the ruu versions install...downloading works, but installing stops somewhere and just goes back to the installed version (not that I am particularly interested in the stock version). Maybe it doesn't work with the developer version...? I also got a reply from Hansoon stating that the bootloader IS unlocked and has s=off. So the next step is trying to flash a custom recovery...when I bought the phone it said actually something about 'refurbished test unit'...which at that time didn't mean anything to me ...
Click to expand...
Click to collapse
The bootloader is locked (see your pictures). Can you please post your fastboot getvar all? I think it might be possible to ruu but youll need to flash firmware first. Ive seen a post on gsm forum of someone having the same problem

Result of getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.1000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT MFG
(bootloader) serialno: HT44GW904068
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4044mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: MFG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ca9de410ef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Result of trying alternative recovery :
C:\fastboot>fastboot boot recovery.img
downloading 'recovery.img'...
OKAY [ 1.607s]
booting...
OKAY [ 0.001s]
finished. total time: 1.609s
Htc recovery screen locked…second issue of above command wants to download non-existing boot.img…
Just checking (again) what’s connected…
C:\fastboot>fastboot devices
HT44GW904068 fastboot
Trying to flash the recovery….
C:\fastboot>fastboot flash recovery recovery.img
sending 'recovery' (12936 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.000s

Utz2006 said:
Result of getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.1000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT MFG
(bootloader) serialno: HT44GW904068
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4044mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: MFG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ca9de410ef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Result of trying alternative recovery :
C:\fastboot>fastboot boot recovery.img
downloading 'recovery.img'...
OKAY [ 1.607s]
booting...
OKAY [ 0.001s]
finished. total time: 1.609s
Htc recovery screen locked…second issue of above command wants to download non-existing boot.img…
Just checking (again) what’s connected…
C:\fastboot>fastboot devices
HT44GW904068 fastboot
Trying to flash the recovery….
C:\fastboot>fastboot flash recovery recovery.img
sending 'recovery' (12936 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.000s
Click to expand...
Click to collapse
It's S-OFF so it should be easy to convert it to a retail (PVT SHIP) version. I see 2 possibilities:
1- You can flash a custom recovery masked in a firmware.zip file instead of flashing it using "fastboot flash recovery" (btw, "fastboot boot recovery.img" was only working on hboot 1.44, command was disabled on newer hboot version). The custom firmware.zip should be accepted by your phone since it's S-OFF. (This is a well known method used to flash recovery on a locked but s-off bootloader)
e.g:
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
where "firmware.zip" is a zip file containing twrp recovery .img file and the android-info.txt file matching your phone info (if you are unsure about that, I can make a firmware.zip for you, just ask if you need.
Once the recovery is flashed you could flash a custom rom of your choice
Problem (if its a problem) is that your phone will still run that strange 1.55.1 hboot, still be a pvt-mfg version.
2-You can update your firmware (i.e from 6.09.401.5 to 6.09.401.10) and then flash the 7.19.401.51 ruu. This is what someone from gsmdevelopers.com/ did to convert his pvt-mfg phone to a "normal" pvt-ship and updated version. (this is what I would personally do).
https://www.androidfilehost.com/?fid=95784891001603802
https://www.androidfilehost.com/?fid=24369303960689843
https://www.androidfilehost.com/?fid=24341993505161791
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_6.09.401.10.zip
fastboot flash zip M7_UL_Firmware_6.09.401.10.zip
fastboot reboot-bootloader
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
fastboot reboot

BIG THANKS for the info and research ! Since I rarely touch the gadgets once they do what I (!) want...
Alray you're my hero - at least for today )
I used the second method and everything worked like a charm...BIG THANKS!
Now the ten thousand dollar question...which rom ? Something not too fancy which is reliable, no battery hog and only minimal Google installs.....any suggestions?

Utz2006 said:
BIG THANKS for the info and research ! Since I rarely touch the gadgets once they do what I (!) want...
Alray you're my hero - at least for today )
I used the second method and everything worked like a charm...BIG THANKS!
Now the ten thousand dollar question...which rom ? Something not too fancy which is reliable, no battery hog and only minimal Google installs.....any suggestions?
Click to expand...
Click to collapse
Glad to know it worked :highfive:
What rom type do you want? With HTC sense or not?
I was using InsertCoin 7.1.3 for a while and it was really stable (Android 5.0.2 + Sense 7)
Not tried any 6.0 roms since they were apparently unstable and not battery friendly...
Now I'm using Resurrection Remix 5.8.0 (android 7.1.1) Which i found is the most stable Nougat rom for me at the moment. You can flash the minimalist gapps package on it. You really have to try a few roms to know which one is the best for you.
out of curiosity, is your phone still s-off or the conversion turned it back to s-on ? Does the bootloader still says PVT MFG or its now PVT SHIP ?

...I was so happy that I didn't even look at the bootloader....I'll keep you posted!
As to the rom...is there any real advantage with the nougat version? Or is it more the experiment thrill?

Utz2006 said:
...I was so happy that I didn't even look at the bootloader....I'll keep you posted!
As to the rom...is there any real advantage with the nougat version? Or is it more the experiment thrill?
Click to expand...
Click to collapse
There are some interesting new features like long-pressing an app icon brings up a menu of common in-app actions, split windows, the possibility to use the Pixel launcher... Nice features but I could live without them. The biggest letdown for me is that Xposed isn't compatible yet (not for to long I hope).

Thank you so much for this. I had exactly the same problem as OP and this solved it beautifully.