I was going to flash Pacman on my nook color and keep getting an error when flashing. I get this error even if I try to flash an update to CM 11. I'm running from the internal memory and not an SD card. My recovery is CWM 6.0.4.7 . I tried to locate a more up to date recovery either TWRP or CWM and am hitting a wall.
Is my issue with the recovery or the rom download? The fault I'm getting is a status 0.
Sent from my GT-N5110 using XDA Premium HD app
glockman4519 said:
I was going to flash Pacman on my nook color and keep getting an error when flashing. I get this error even if I try to flash an update to CM 11. I'm running from the internal memory and not an SD card. My recovery is CWM 6.0.4.7 . I tried to locate a more up to date recovery either TWRP or CWM and am hitting a wall.
Is my issue with the recovery or the rom download? The fault I'm getting is a status 0.
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
You cannot use v6047 on pacman. It and older ROMs require a version older than v6045. You can get older versions in my NC Tips thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Related
I was running cm10.2 nightlies. I tried to go to carbon and it was having some issues with boot looping. I tried to reinstall cwm recovery to emmc off of my sd card being I had changed to twrp. Now it wont boot from sd card and is still on twrp but wont let me install any zips. it gives me error with zip signature. Now it just boots to twrp everytime and wont go to anything even after I tried to restore to 10.2 nigtlies that I had backed up in twrp. How can i get this thing back to a clean slate and start over?
pitmanr2003 said:
I was running cm10.2 nightlies. I tried to go to carbon and it was having some issues with boot looping. I tried to reinstall cwm recovery to emmc off of my sd card being I had changed to twrp. Now it wont boot from sd card and is still on twrp but wont let me install any zips. it gives me error with zip signature. Now it just boots to twrp everytime and wont go to anything even after I tried to restore to 10.2 nigtlies that I had backed up in twrp. How can i get this thing back to a clean slate and start over?
Click to expand...
Click to collapse
You can turn off signature verification in TWRP. Go to my HD/HD+ CWM thread linked in my signature and try to flash one of my plain stock zips from item 6. That should restore everything. Be sure to factory reset with TWRP too before you reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
I used your stock zips and fixed it. But I'm still having original problem which is reboots and sleep of death. I'm going to flash 10.1.3 stable and gapps no apps and run for a day and see if its a third party app. What do u suggest.
Sent from my SGH-M919 using xda app-developers app
How can I partition and go back to way it was when I for it just in case I have to send back for warranty
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
How can I partition and go back to way it was when I for it just in case I have to send back for warranty
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Just do what you did earlier, flash the stock zip. Also do a factory reset with your custom recovery.
And doing what you suggested earlier about not installing apps right away is a good idea. Many have said maps and having GPS checked can be a problem.
Sent from my Nook HD+ running CM10.1 on emmc.
OK did that still no good. I ran log cat and I can't tell why it died from it. How do I get rid of everything to send it back to stock. I may start from scratch. If I can get it to boot to sdcard. That don't work either now
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
OK did that still no good. I ran log cat and I can't tell why it died from it. How do I get rid of everything to send it back to stock. I may start from scratch. If I can get it to boot to sdcard. That don't work either now
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I just told you twice. Flash the plain stock zip and factory reset.
But if your CWM SD will not boot, you need to try one of the options below.
If you flashed the custom recovery, power on with the power button and n button. Release after about 7 seconds. Should boot to that custom recovery and you can flash the plain stock zip.
If you did not flash a custom recovery, just interrupt the boot 8 times in a row and it will completely reset.
Sent from my Galaxy Tab 2 using XDA Premium
Sorry for confusion. But can u show me link to stock zip. I flashed chdisk zip and reset zip or something like that.
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
Sorry for confusion. But can u show me link to stock zip. I flashed chdisk zip and reset zip or something like that.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
It is in my HD/HD+ CWM thread linked in my signature. See item 6. I told you that in my first reply to you in this thread. I am the only one that has replied to you in this thread. It should not be that hard.
Sent from my Nook HD+ running CM10.1 on emmc.
OK I got it to completely reset but boot loops at nook. I'm guessing I know have to make a bootable SD cause I can't get to stock recovery. It resets to stock but like there isn't a ROM to go to
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
OK I got it to completely reset but boot loops at nook. I'm guessing I know have to make a bootable SD cause I can't get to stock recovery. It resets to stock but like there isn't a ROM to go to
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Do that 8 times in a row and see what happens.
Sent from my Nook HD+ running CM10.1 on emmc.
It goes to nook screen and has a progress bar and then reboots to nook screen and loops again
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
It goes to nook screen and has a progress bar and then reboots to nook screen and loops again
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
When you were messing with TWRP to get things back earlier, did you format /bootdata?
Sent from my Nook HD+ running CM10.1 on emmc.
I may have. I tried re partition
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
I may have. I tried re partition
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
What do you mean you tried re partition? What did you do?
Sent from my Nook HD+ running CM10.1 on emmc.
In twrp you can partition plus I wiped internal data
Sent from my SGH-M919 using xda app-developers app
pitmanr2003 said:
In twrp you can partition plus I wiped internal data
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
ok update. i can now with no sd card boot like normal into stock nook. i think im making progress. my sd card when inserted will show the cyanoboot, but doesnt go to cwm recovery just reboots
pitmanr2003 said:
In twrp you can partition plus I wiped internal data
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
In TWRP you can only partition the SD, not internal memory. That is why your SD will not boot any more. Send me your serial number via Private Message and I will make a custom zip for you to flash. You also need to make a new bootable CWM SD since you repartitioned the old one.
Sent from my Nook HD+ running CM10.1 on emmc.
pitmanr2003 said:
In twrp you can partition plus I wiped internal data
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
ok update. i can now with no sd card boot like normal into stock nook. i think im making progress. my sd card when inserted will show the cyanoboot, but doesnt go to cwm recovery just reboots
so i went to set nook up and it restarted and went into nook bootloop again. ughh
ok if i can get it to boot again so that I can get serial number.
I try to upgrate to cm-11-20140308-SNAPSHOT-M4-ovation (directly frome Nook) today but it always fails, saying (status 7) installation aborted. I tried reboot system and recovery several times but they didn't work. So I just gave up and wiped data to turn to factory setting. Now I can't wake my device up with power on, after showing cyanoboot, it just truns black.
Don't know what to do now QAQ.
You probably used an old version of CWM to flash the CM11 zip. It requires v6045 or newer. And wiping data does not return it to stock. You must flash the stock ROM. Go to my HD/HD+ CWM thread linked in my signature and get the stock ROM zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You probably used an old version of CWM to flash the CM11 zip. It requires v6045 or newer. And wiping data does not return it to stock. You must flash the stock ROM. Go to my HD/HD+ CWM thread linked in my signature and get the stock ROM zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So I can't upgrade from 10.2.1 and have to install from SD card?
Now succeeded from SDcard, but still don't know why it failed on divice (sad
erisnyx said:
Now succeeded from SDcard, but still don't know why it failed on divice (sad
Click to expand...
Click to collapse
You are talking two different ROMs, first CM11 them CM10.2.1. CM11 is the one that needs v6045 or newer. Not sure what you succeeded with.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are talking two different ROMs, first CM11 them CM10.2.1. CM11 is the one that needs v6045 or newer. Not sure what you succeeded with.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I see~ I think I rewrote my SDcard last month, so SDcard works. And maybe I didn't do the recovery when upgrading at the first time, which leads to the following failure.
Thank you so much for your patience and time!
I have a strange issue with a nook HD where someone tried to do a CM upgrade to 11 from 10.2. The issue is that after they did this the tablet now is stuck in a boot loop where the Nook logo shows, then the cyanoboot logo, it will repeat this process for four times then load into clockwork mod.
I have tried to create bootable SD cards but I am unable to get it to boot the SD, it just repeats this cycle over and over.
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Nightshades said:
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Click to expand...
Click to collapse
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Nightshades said:
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Click to expand...
Click to collapse
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Nightshades said:
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Click to expand...
Click to collapse
Sometimes it is hard to get an SD to boot. Follow the procedure in making the SD exactly as described in my HD/HD+ CWM thread, item 1a, including copying MLO first and not inserting the SD into the slot the first time until the device is off. Also try a different SD.
Sent from my BN NookHD+ using XDA Premium HD app
It will only boot into CWM-based recovery v6.0.2.7-stock.
I have tried to install zip from sd card. It installs. I installed Nookhd-CWM-60460-for-internal-memory-rev0-(07-13-14).zip. Then I installed cm-10.2.1-hummingbird.zip. Lastly I installed Gaaps-jb-4.2.1-20121128-signed.zip.
I restart the Nook and it boots right back into recovery.
PLEASE HELP.
english\alphabet said:
It will only boot into CWM-based recovery v6.0.2.7-stock.
I have tried to install zip from sd card. It installs. I installed Nookhd-CWM-60460-for-internal-memory-rev0-(07-13-14).zip. Then I installed cm-10.2.1-hummingbird.zip. Lastly I installed Gaaps-jb-4.2.1-20121128-signed.zip.
I restart the Nook and it boots right back into recovery.
PLEASE HELP.
Click to expand...
Click to collapse
Try taking it back to stock per my HD/HD+ CWM thread linked in my signature. Sometimes this clears this issue.
Sent from my SCH-i705 using XDA Premium HD app
is there any way you can give me step by step instructions because I am confused.
i tried to flash the stock zip. And status 7 appeared.
english\alphabet said:
i tried to flash the stock zip. And status 7 appeared.
Click to expand...
Click to collapse
You are using too new of a version of CWM. Use the one made from the instructions from item 1a. It has to be older than version 6045. Then use the CWM to do a factory reset and to flash the plain stock zip.
Sent from my BN NookHD+ using XDA Premium HD app
it worked but my touch screen won't work
i was trying to put cm11 on my nook hd but i didint have it rooted and i kept getting a status 7 when downloading it so i gave up but now
when i boot my nook up it goes to cwm recovery and i dont know how to get rid of it
Calebwf1 said:
i was trying to put cm11 on my nook hd but i didint have it rooted and i kept getting a status 7 when downloading it so i gave up but now
when i boot my nook up it goes to cwm recovery and i dont know how to get rid of it
Click to expand...
Click to collapse
Go to my HD / HD+ CWM thread linked in my signature and make a new CWM SD per item 1a there and use it to flash a plain stock zip from item 6. And the reason you were getting an error 7 was you were using too old of a CWM. CM 11 needs version 6045 or newer. You can get what you need in the dummies thread linked in my signature.
Sent from my SM-T707V using XDA Premium HD app