I try to upgrate to cm-11-20140308-SNAPSHOT-M4-ovation (directly frome Nook) today but it always fails, saying (status 7) installation aborted. I tried reboot system and recovery several times but they didn't work. So I just gave up and wiped data to turn to factory setting. Now I can't wake my device up with power on, after showing cyanoboot, it just truns black.
Don't know what to do now QAQ.
You probably used an old version of CWM to flash the CM11 zip. It requires v6045 or newer. And wiping data does not return it to stock. You must flash the stock ROM. Go to my HD/HD+ CWM thread linked in my signature and get the stock ROM zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You probably used an old version of CWM to flash the CM11 zip. It requires v6045 or newer. And wiping data does not return it to stock. You must flash the stock ROM. Go to my HD/HD+ CWM thread linked in my signature and get the stock ROM zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So I can't upgrade from 10.2.1 and have to install from SD card?
Now succeeded from SDcard, but still don't know why it failed on divice (sad
erisnyx said:
Now succeeded from SDcard, but still don't know why it failed on divice (sad
Click to expand...
Click to collapse
You are talking two different ROMs, first CM11 them CM10.2.1. CM11 is the one that needs v6045 or newer. Not sure what you succeeded with.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are talking two different ROMs, first CM11 them CM10.2.1. CM11 is the one that needs v6045 or newer. Not sure what you succeeded with.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I see~ I think I rewrote my SDcard last month, so SDcard works. And maybe I didn't do the recovery when upgrading at the first time, which leads to the following failure.
Thank you so much for your patience and time!
Related
Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!
wasabitobiko said:
Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!
Click to expand...
Click to collapse
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks man.. I'll give it a shot and let you know how it goes.
Cheers!
Stuck at CWM main screen
leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!
wasabitobiko said:
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!
Click to expand...
Click to collapse
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app
Dohhhhhh..
leapinlar said:
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
What a dumbass!!!... Got things working again.. Huge thanks... again!!
Cheers!
I was going to flash Pacman on my nook color and keep getting an error when flashing. I get this error even if I try to flash an update to CM 11. I'm running from the internal memory and not an SD card. My recovery is CWM 6.0.4.7 . I tried to locate a more up to date recovery either TWRP or CWM and am hitting a wall.
Is my issue with the recovery or the rom download? The fault I'm getting is a status 0.
Sent from my GT-N5110 using XDA Premium HD app
glockman4519 said:
I was going to flash Pacman on my nook color and keep getting an error when flashing. I get this error even if I try to flash an update to CM 11. I'm running from the internal memory and not an SD card. My recovery is CWM 6.0.4.7 . I tried to locate a more up to date recovery either TWRP or CWM and am hitting a wall.
Is my issue with the recovery or the rom download? The fault I'm getting is a status 0.
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
You cannot use v6047 on pacman. It and older ROMs require a version older than v6045. You can get older versions in my NC Tips thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
i am trying to revive my nook at ive fails to many times, but im borad and im back at it, so i was trying to install stock recovery so i cant repair my portion 2 so i could 8 count reboot and fix my nook, but when i tried to install "NookColor-emmc-stockrecovery" i get the message when in install say the need needs 4 aregs and i only have 3. thats is whats holding me back form reviving my nook, could someone help he figure out with areg is missing?
YellowCobra said:
i am trying to revive my nook at ive fails to many times, but im borad and im back at it, so i was trying to install stock recovery so i cant repair my portion 2 so i could 8 count reboot and fix my nook, but when i tried to install "NookColor-emmc-stockrecovery" i get the message when in install say the need needs 4 aregs and i only have 3. thats is whats holding me back form reviving my nook, could someone help he figure out with areg is missing?
Click to expand...
Click to collapse
You need to be using an older CWM.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You need to be using an older CWM.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
i did that, but i dont think my 8 reboots are working, what should i do?
YellowCobra said:
i did that, but i dont think my 8 reboots are working, what should i do?
Click to expand...
Click to collapse
I'm not sure what you mean by 'you did that'. You did what? Use an older CWM? Did it install the zip properly? You need to be more specific. The 8 failed boot will not work without the stock recovery installed. If you just want stock back, use an old recovery to flash the stock ROM zip I have linked in item A15 in my NC Tips thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I'm not sure what you mean by 'you did that'. You did what? Use an older CWM? Did it install the zip properly? You need to be more specific. The 8 failed boot will not work without the stock recovery installed. If you just want stock back, use an old recovery to flash the stock ROM zip I have linked in item A15 in my NC Tips thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
the things i have done are installing the stock recovery using the old CWM, flashing the stock rom thats signed for cwm and also doing the 8 failed reboot
YellowCobra said:
the things i have done are installing the stock recovery using the old CWM, flashing the stock rom thats signed for cwm and also doing the 8 failed reboot
Click to expand...
Click to collapse
You said the stock recovery zip failed when you tried to flash with an error about the number of arguments. I suggested that you use an older CWM. You said you tried that. But you did not say if it installed then without the error message. And you do not describe what it does when you try the 8 failed boot procedure. And did the stock ROM install complete successfully?
What are your symptoms? What does it boot to?
Sent from my BN NookHD+ using XDA Premium HD app
I have a strange issue with a nook HD where someone tried to do a CM upgrade to 11 from 10.2. The issue is that after they did this the tablet now is stuck in a boot loop where the Nook logo shows, then the cyanoboot logo, it will repeat this process for four times then load into clockwork mod.
I have tried to create bootable SD cards but I am unable to get it to boot the SD, it just repeats this cycle over and over.
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Nightshades said:
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Click to expand...
Click to collapse
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Nightshades said:
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Click to expand...
Click to collapse
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Nightshades said:
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Click to expand...
Click to collapse
Sometimes it is hard to get an SD to boot. Follow the procedure in making the SD exactly as described in my HD/HD+ CWM thread, item 1a, including copying MLO first and not inserting the SD into the slot the first time until the device is off. Also try a different SD.
Sent from my BN NookHD+ using XDA Premium HD app
It was working flawlessly on cm11 however my little boy said it will no longer boot up correctly and has started to only load up Cyanoboot. I assume he may have done a system update that has made it go wrong. I followed the tutorial for how to unbrick a nook (http://forum.xda-developers.com/showthread.php?t=1663836) with the idea of starting fresh however I cant get it to boot from the SD card. I have restarted it countless times but only ever end up back at Cyanoboot.....could anyone help me out?
t3stin said:
It was working flawlessly on cm11 however my little boy said it will no longer boot up correctly and has started to only load up Cyanoboot. I assume he may have done a system update that has made it go wrong. I followed the tutorial for how to unbrick a nook (http://forum.xda-developers.com/showthread.php?t=1663836) with the idea of starting fresh however I cant get it to boot from the SD card. I have restarted it countless times but only ever end up back at Cyanoboot.....could anyone help me out?
Click to expand...
Click to collapse
That tutorial is for a Nook Tablet. Those files will not work on the hd. Go to my hd/hd+ cwm thread linked in my signature and make a new CWM SD per item 1a. Then flash the plain stock rom from item 6 followed by a factory reset.
Sent from my SM-T707V using XDA Premium HD app
sorry for the delayed reply - only just got round to attempting this - I have followed along fine but everytime I try to flash a zip file i get "Can't open ....."
(bad)
Installation aborted.
I have redownloaded the files multiple times to rule out a bad download - any other ideas?
EDIT: Disabled anti virus and redownloaded the zips again - can flash unknown sources etc but still cant flash a stock rom (same problem of (bad) install aborted)
Thank you
t3stin said:
sorry for the delayed reply - only just got round to attempting this - I have followed along fine but everytime I try to flash a zip file i get "Can't open ....."
(bad)
Installation aborted.
I have redownloaded the files multiple times to rule out a bad download - any other ideas?
EDIT: Disabled anti virus and redownloaded the zips again - can flash unknown sources etc but still cant flash a stock rom (same problem of (bad) install aborted)
Thank you
Click to expand...
Click to collapse
What cwm are you using and what zip are you trying to flash?
Sent from my SM-T707V using XDA Premium HD app
CWM running from the SD is from your thread - 6.0.2.7 - stock
I have tried to flash the roms from your thread 2.1.0 plain / 2.2.1 plain / Full 2.1.1 Stock with Root and succulent cm11 all end with the bad installation aborted error message.
Thanks for getting back to me.
t3stin said:
CWM running from the SD is from your thread - 6.0.2.7 - stock
I have tried to flash the roms from your thread 2.1.0 plain / 2.2.1 plain / Full 2.1.1 Stock with Root and succulent cm11 all end with the bad installation aborted error message.
Thanks for getting back to me.
Click to expand...
Click to collapse
Are you using the hummingbird versions of the roms?
Sent from my SM-T707V using XDA Premium HD app
succulent was - the one from your thread was just "NookHD-factory-2.1.0-plain-stock" not usre if it's hummingbird or not?
Nook HD means hummingbird. How are you copying the zips to the SD?
Sent from my SM-T707V using XDA Premium HD app
Just a copy / paste in windows explorer which worked fine for the unknown sources zip (admittedly it's a much smaller filesize)
leapinlar said:
Nook HD means hummingbird. How are you copying the zips to the SD?
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
no ideas??
t3stin said:
no ideas??
Click to expand...
Click to collapse
Only the anti-virus thing and you said you tried that. Ordinarily I would say to try downloading with the tablet but I don't think that your tablet is booting. Try another PC.
Sent from my SM-T707V using XDA Premium HD app
Tried another PC but same result, really frustrating
leapinlar said:
Only the anti-virus thing and you said you tried that. Ordinarily I would say to try downloading with the tablet but I don't think that your tablet is booting. Try another PC.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse