Related
[Q] HTC One Automatically Reboots "Process com.htc.htcdialer isn't responding"
I managed to "successfully" flash the ViperOne 6.1.0 ROM onto my Sprint HTC One (S-On.) However, I get a message saying "Process com.htc.htcdialer isn't responding. Do you want to close it?" This causes my phone to automatically reboot every couple of minutes, making it useless. I also noticed some thins don't work such as the Play Store and the search bar on the home screen. It is apparent that something is wrong with the flash (even though I tried to flash it twice after I saw this behaviour the first time and I did wipe both times.)
What is going on? How can I fix it? What causes it (what I really want to know is if I were to fix it and then attempt to install the ROM again, would it cause the issue again?)
Maybe flash the latest radio/baseband
BD619 said:
Maybe flash the latest radio/baseband
Click to expand...
Click to collapse
Does that mean flash the firmware? If so, that won't be possible. My phone is S-On, and from what I've read it needs to be S-Off. I tried to make it S-Off a few minutes ago using Rumrunner but it failed (because my phone automatically rebooted during the process I assume.)
Plus, I can't access my phone's storage via my computer; it doesn't seem to mount properly. Wouldn't matter if it did anyways, as it disconnects after a minutes anyways. I was hoping I could just install the stock ROM and leave this stuff alone for now.
I should mention that this is the first time I've ever tried to flash a custom ROM or really do anything "advanced" with an Android phone. I didn't expect to run into so many bloody problems. What a nightmare.
Beefcake4000 said:
Does that mean flash the firmware? If so, that won't be possible. My phone is S-On, and from what I've read it needs to be S-Off. I tried to make it S-Off a few minutes ago using Rumrunner but it failed (because my phone automatically rebooted during the process I assume.)
Plus, I can't access my phone's storage via my computer; it doesn't seem to mount properly. Wouldn't matter if it did anyways, as it disconnects after a minutes anyways. I was hoping I could just install the stock ROM and leave this stuff alone for now.
I should mention that this is the first time I've ever tried to flash a custom ROM or really do anything "advanced" with an Android phone. I didn't expect to run into so many bloody problems. What a nightmare.
Click to expand...
Click to collapse
You can flash the radio from recovery.
Since you can't connect to PC while booted to rom boot to recovery and type
Code:
adb push filename.zip /sdcard/
When it's on your phone just choose it and flash once it's done flashing wipe cache and dalvik cache and you should be good
BD619 said:
You can flash the radio from recovery.
Since you can't connect to PC while booted to rom boot to recovery and type
Code:
adb push filename.zip /sdcard/
When it's on your phone just choose it and flash once it's done flashing wipe cache and dalvik cache and you should be good
Click to expand...
Click to collapse
Okay, I flashed the latest radio. So far it hasn't said anything about the dialer crashing and when I open it, it actually works. However, the play store and search bar (and probably other things) still don't work. Something is still wrong.
For now I just want to make my phone work and I will try to go back to the stock ROM, though I still want to get the custom ROM working.
Beefcake4000 said:
Okay, I flashed the latest radio. So far it hasn't said anything about the dialer crashing and when I open it, it actually works. However, the play store and search bar (and probably other things) still don't work. Something is still wrong.
For now I just want to make my phone work and I will try to go back to the stock ROM, though I still want to get the custom ROM working.
Click to expand...
Click to collapse
theres a data fix in the 6.1.0 forum you might need to flash.
Aldo101t said:
theres a data fix in the 6.1.0 forum you might need to flash.
Click to expand...
Click to collapse
here is a link
Aldo101t said:
here is a link
Click to expand...
Click to collapse
I flashed it doesn't seem like it's helping. The only problem that I am experiencing right now is that the play store doesn't work. It just shows a blank, white screen and seems to re-open over itself. I get a notification saying "An application requires installation of Google Play Services. Requested by com.google.android.gsf.login" When I click on the notification, it takes me to the play store and nothing happens (though one time the phone rebooted after I pressed it.) I found that I do have Google Play Services installed and that the notification is supposed to take me to the store page for the app, but it doesn't work.
Beefcake4000 said:
I flashed it doesn't seem like it's helping. The only problem that I am experiencing right now is that the play store doesn't work. It just shows a blank, white screen and seems to re-open over itself. I get a notification saying "An application requires installation of Google Play Services. Requested by com.google.android.gsf.login" When I click on the notification, it takes me to the play store and nothing happens (though one time the phone rebooted after I pressed it.) I found that I do have Google Play Services installed and that the notification is supposed to take me to the store page for the app, but it doesn't work.
Click to expand...
Click to collapse
go to accounts in settings and delete the account then add the account with your gmail account and password, might straighten you out
Aldo101t said:
go to accounts in settings and delete the account then add the account with your gmail account and password, might straighten you out
Click to expand...
Click to collapse
Managed to remove to account but can't add it. When I try to sign in, it says "There was a problem communicating with Google servers. Try again later." I am sure I have an internet connection because I checked by opening the browser and doing a random Google search.
Beefcake4000 said:
Managed to remove to account but can't add it. When I try to sign in, it says that there was an error communicating with Google services. I am sure I have an internet connection because I checked by opening the browser and doing a random Google search.
Click to expand...
Click to collapse
are you connected to wifi or network. also try to update your profile(you can;t update profile unless you have the sprint zone app)if you are on viper 6.1.0 i don't have a link to it either, maybe someone can chime in here with a working link.
Aldo101t said:
are you connected to wifi or network. also try to update your profile(you can;t update profile unless you have the sprint zone app)if you are on viper 6.1.0 i don't have a link to it either, maybe someone can chime in here with a working link.
Click to expand...
Click to collapse
Connected via Wi-Fi. My phone says I am also connected to the network, but I believe that this is false because I have not activated my phone (unless activating it on the stock ROM transfers over to this one?) and in the rare occasion that I get ANY service in this part of my home, it'd be only one bar, not four.
Beefcake4000 said:
Connected via Wi-Fi. My phone says I am also connected to the network, but I believe that this is false because I have not activated my phone (unless activating it on the stock ROM transfers over to this one?) and in the rare occasion that I get ANY service in this part of my home, it'd be only one bar, not four.
Click to expand...
Click to collapse
if your not activated that's why the market nots working or google services.
Aldo101t said:
if your not activated that's why the market nots working or google services.
Click to expand...
Click to collapse
No, it's not that. I tried to activate and it told me it was already activated.
By the way, I tried turning off 2-step verification and it still returns the same error.
Aldo101t said:
are you connected to wifi or network. also try to update your profile(you can;t update profile unless you have the sprint zone app)if you are on viper 6.1.0 i don't have a link to it either, maybe someone can chime in here with a working link.
Click to expand...
Click to collapse
Thanks to this post, I found a working link:
adamlee011 said:
https://www.dropbox.com/s/h6omr8c4pa...le-v4.6.51.apk
Edit : you can't install this normally, it must be pushed to /system/priv-app
Sent from my 831C using xda app-developers app
Click to expand...
Click to collapse
I pushed the apk successfully. I tried to install it normally, and as stated, it didn't work. I did find the Sprint Zone app in my apps list afterwards though. When I try to go to System Updates in Settings, I get a message saying "Settings has stopped working." or something along those lines.
Beefcake4000 said:
Thanks to this post, I found a working link:
I pushed the apk successfully. I tried to install it normally, and as stated, it didn't work. I did find the Sprint Zone app in my apps list afterwards though. When I try to go to System Updates in Settings, I get a message saying "Settings has stopped working." or something along those lines.
Click to expand...
Click to collapse
yeah, it's a known bug, that's why you have to use the sprint zone app, under my device to update the profile. how i got it was to go to titanium backup and found the sprint zone apk and restored app and data. but it may not work for you, it worked for me though.
Here it is
https://www.dropbox.com/s/qnt924ila6k5ngh/zone-mobile-v4.6.51.apk
Sent from my HTCONE using XDA Free mobile app
link to sprint zone
Aldo101t said:
yeah, it's a known bug, that's why you have to use the sprint zone app, under my device to update the profile. how i got it was to go to titanium backup and found the sprint zone apk and restored app and data. but it may not work for you, it worked for me though.
Click to expand...
Click to collapse
Ah, okay. I thought I had to have the app installed. Didn't know I had to do it through the app rather than settings. Unfortunately, it didn't solve the Google log-in issue. I also noticed that now if I try to access YouTube, it will tell me that it needs Google Play Services and that I don't have it installed.
Beefcake4000 said:
Ah, okay. I thought I had to have the app installed. Didn't know I had to do it through the app rather than settings. Unfortunately, it didn't solve the Google log-in issue. I also noticed that now if I try to access YouTube, it will tell me that it needs Google Play Services and that I don't have it installed.
Click to expand...
Click to collapse
doesn't it ask you if yu want to install google services did you try to clear data and reboot on the google stuff, like the play store etc
yeah you have to have the apk installed.
Aldo101t said:
doesn't it ask you if yu want to install google services did you try to clear data and reboot on the google stuff, like the play store etc
yeah you have to have the apk installed.
Click to expand...
Click to collapse
I posted earlier stating that I saw Google Play Services listed under my apps, and it was up-to-date as far as I know. It does ask me if I want to install it but then takes me to the Google account sign-in (which I can't sign into.) Clearing the data on every Google app I saw and rebooting did not resolve the sign-in issue.
I'm going to try to re-flash the ROM, fix, and radio because I managed to sign in during the set-up. I'll see if that clears up all of my problems.
EDIT: WORKED! Few minutes in and not a single problem so far. Signed into Google and the Play Store works. I may be speaking too soon though.
Thanks for the help!
Side question: How can I remove some apps such as HTC Apps and HTC Backup? I click on them and it says the apps are not installed but they still show up in the list of apps.
Hi guys. I'm going to apologize in advance that I am a noob when it comes to hacking and rooting. I've successfully gained root access to my Verizon LG G2 using my computer. I used originally used an app called G2 Tweaksbox that allows you to change a lot of things about the phone. But then I wanted to try the famous CM 11. I did the tutorial on youtube, but I didn't install the GAPPS zip. Then I rebooted my phone and now it became stuck on the LG startup screen but looping over and over again. I've tried to hard reset it but it won't work. Is there any possible way to fix this, because I used another family members upgrade to get this phone after I broke my last one? Please don't judge but please help me if you can.:crying::crying::crying:
DevStep said:
Hi guys. I'm going to apologize in advance that I am a noob when it comes to hacking and rooting. I've successfully gained root access to my Verizon LG G2 using my computer. I used originally used an app called G2 Tweaksbox that allows you to change a lot of things about the phone. But then I wanted to try the famous CM 11. I did the tutorial on youtube, but I didn't install the GAPPS zip. Then I rebooted my phone and now it became stuck on the LG startup screen but looping over and over again. I've tried to hard reset it but it won't work. Is there any possible way to fix this, because I used another family members upgrade to get this phone after I broke my last one? Please don't judge but please help me if you can.:crying::crying::crying:
Click to expand...
Click to collapse
Which cm did you try? The official or JackpotCalvin's?
Sent from my VS980 4G using XDA Premium 4 mobile app
njstein said:
Which cm did you try? The official or JackpotCalvin's?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the official nightly version. Thanks for the quick reply.
DevStep said:
I tried the official nightly version. Thanks for the quick reply.
Click to expand...
Click to collapse
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
simple_fear85 said:
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
Click to expand...
Click to collapse
Why would you need to uninstall Xposed modules? Everything gets wiped anyway.
mjones73 said:
Why would you need to uninstall Xposed modules? Everything gets wiped anyway.
Click to expand...
Click to collapse
I had issues with my phone messing up if I kept xposed with modules installed still when I did clear all and installed a rom. Not sure why but I Uninstall now and no issues anymore. I actually lost knock on once leaving xposed installed. I confirmed it with going back to my nano Uninstalling xposed and knock on worked fine
simple_fear85 said:
I had issues with my phone messing up if I kept xposed with modules installed still when I did clear all and installed a rom. Not sure why but I Uninstall now and no issues anymore. I actually lost knock on once leaving xposed installed. I confirmed it with going back to my nano Uninstalling xposed and knock on worked fine
Click to expand...
Click to collapse
That's an odd one since Xposed runs in /system. Were you wiping /system and /data without restoring anything on a clean install?
mjones73 said:
That's an odd one since Xposed runs in /system. Were you wiping /system and /data without restoring anything on a clean install?
Click to expand...
Click to collapse
I did a full wipe with Clean install
simple_fear85 said:
If you did a nano backup then restore that if not you are going to have to do the revert back to stock. But for your information for later on. If you install xposed with any modules. Make sure to properly Uninstall all them before you change roms or make any changes
One last thing the official cm rom is no longer supported. No one to work on the g2 anymore
Click to expand...
Click to collapse
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
DevStep said:
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
Click to expand...
Click to collapse
Follow the stock restore guide in the general section.
DevStep said:
Yeah I downloaded xposed and I got the latest module for support. I had no idea that you needed to delete them after you wanted to download a new ROM. Okay so do I fix this? My phone is stuck looping on the LG bootup message and the only way I can stop it is by hard reseting it and that just turns it off. How do I access it on my computer and reflash the stock? Please help.
Click to expand...
Click to collapse
Once your phone is off, hold up and plug it in to your computer. This should put you in download mode. Hopefully you have all the drivers installed...
Sent from my VS980 4G using XDA Premium 4 mobile app
Q&A for [ROM][Lollipop][Z3C] Cyanogenmod 12 - Nightly
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Lollipop][Z3C] Cyanogenmod 12 - Nightly. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ciao Guys,
actually I have rEctiFy ROM with clockworkmod recovery..do I have to flash anyway the cyanogen boot.img ?
mauroalpha said:
Ciao Guys,
actually I have rEctiFy ROM with clockworkmod recovery..do I have to flash anyway the cyanogen boot.img ?
Click to expand...
Click to collapse
I think you do. I tried it once in cwm and it failed, it could also have been a different issue but it works fine with the boot.img of the zip. Just keep in mind to store the zip on the internal storage before you flash the kernel and after wiping it.and that the recovery menu is very dim, you should avoid bright conditions.
Video or pictures
I would like to see how the cyanogenmod works on the Z3 Compact. Could you send me a video or some pictures?
Thanks!
Lukas
I have still some problems with my bluetooth headset. The connection and the controlls works, but often i dont get sound.
supermanlovers said:
I have still some problems with my bluetooth headset. The connection and the controlls works, but often i dont get sound.
Click to expand...
Click to collapse
My Bluetooth headset was acting up when i had the built in equalizer (AudioFx) turned on , try to turn it off and see if it helps.
I also installed viper4android instead which is way better.
Thanks, this worked for me
2mal16 said:
I think you do. I tried it once in cwm and it failed, it could also have been a different issue but it works fine with the boot.img of the zip. Just keep in mind to store the zip on the internal storage before you flash the kernel and after wiping it.and that the recovery menu is very dim, you should avoid bright conditions.
Click to expand...
Click to collapse
I've just installed with cyano recovery, everything was fine..
I want to report that somethimes the mic recorder loss some seconds while i'm using it..i've just updated now the nightly
need to test it again
anyway i'm really happy, the phone for me is now really faster than the stock rom.
Camera button
Anyone figure out how to remap the camera button yet?
So i'm kind of a noob here I guess but I thought to install this one would need to have their device rooted (like I had) and I have it on my device working perfectly, the only problem is the phone is telling me that it is not rooted and thus not letting me use titanium backup and greenify etc.
Is it just me, or is the Auto Updater not rebooting to recovery after downloading the cm-12-20150214-NIGHTLY-z3c -
I did extract and ABD'flashed the boot.img
And theres still an issue with the LED brightness and audio engine wakeup ( Sound seems dim at first, and sometimes notification audio is skipped, almost like it is in hibernation and cant always get out of it ) , cant seem to find it in the fixlog or changelog either
I just got cm12 setup on my galaxy tab 8.4, the only issue i notice thus far is that im finding it impossible to set a different wallpaper on my lockscreen from my gallery pics... If i want to use one of my personal backgrounds i have to use the same as my homescreen. The only way to change just the lockscreen background is to pick one from a theme i downloaded but that option sucks because i never use theme backgrounds... Anyone have a workaround or is that something well have to wait on in another nightly? I was able to do this easily in cm11, just had to go to lockscreen in settings and themes and i could pick it there
kiliimanjaro said:
So i'm kind of a noob here I guess but I thought to install this one would need to have their device rooted (like I had) and I have it on my device working perfectly, the only problem is the phone is telling me that it is not rooted and thus not letting me use titanium backup and greenify etc.
Click to expand...
Click to collapse
Go to Settings, Developer Options, then a few settings from the top you will see "Root access", click it and choose "Apps and ADB" or just "Apps only" (if you don't use ADB).
After root access is enabled you can install SuperSU from the Play Store (or just use the CM root access if you don't want SuperSU).....
Thanks that worked perfectly!
Another problem though (or else me just being silly and overlooking something simple) that when I boot to recovery it brings up the Cyanogenmod Recovery and there is no option to Backup my files. The only options I have are to wipe everything or reboot.
kiliimanjaro said:
Thanks that worked perfectly!
Another problem though (or else me just being silly and overlooking something simple) that when I boot to recovery it brings up the Cyanogenmod Recovery and there is no option to Backup my files. The only options I have are to wipe everything or reboot.
Click to expand...
Click to collapse
When you flash boot.img from the nightly .zip file you get the CM Recovery. You are correct in that there is no backup option. Use Titanium or some other app to back up your stuff. You can also use a different recovery but you may run into a different problem where the phone identifies itself as "aries" and won't flash the ROM. The CM Recovery takes care of that problem.
Anyone found a fix to the dim notification led issue? I think its related to the CM recovery. Anyone that can confirm this issue aswell?
I have a tab pro 8.4 running cm12 latest nightlies and i cant get adblock plus to work on it. Ive tried everything. It ran beautifully on cm 11 but on cm12 it FCs either right after u launch it or sometimes i can almost get done downloading the site block list. I have the wifi only version of the sm-t320 if that helps. Any ideas anyone? Either a way to fix it or an alternative app?
jflow36 said:
I have a tab pro 8.4 running cm12 latest nightlies and i cant get adblock plus to work on it. Ive tried everything. It ran beautifully on cm 11 but on cm12 it FCs either right after u launch it or sometimes i can almost get done downloading the site block list. I have the wifi only version of the sm-t320 if that helps. Any ideas anyone? Either a way to fix it or an alternative app?
Click to expand...
Click to collapse
try adaway (the newest dev build version) from this thread: http://forum.xda-developers.com/showthread.php?t=2190753
I think it worked for me when i was running cm 12.
firsty said:
Anyone found a fix to the dim notification led issue? I think its related to the CM recovery. Anyone that can confirm this issue aswell?
Click to expand...
Click to collapse
+1. Loving it but the notification LED is basically invisible compared to the stock ROM. Anyone know of a fix for this?
A couple of issues I've run into is sometimes bluetooth audio gets sped-up so my music sounds like it is playing a 2x speed (Google play music) and I'm unable to activate any accessibility services (I can get into the cancel or ok screen but can't click ok). Anybody else have these or know a workaround?
Hi all.
I installed cm13 on my mi5 pro yesterday. Looking good so far. I only have minor issues. The first and most important is I can't swap the back and recent button. I've already got used to miui method ( back on the right, recent button on the left).
How can I change them on cm13? Unfortunately closed+gravity can't help me, because after installing them my banking app (Barclay's) thinks that my phone is rooted and closes with an FC. I've also tried the buttons on the screen option, but in this way I lose screen size, though I can change the buttons I believe.
The other small issue is that I don't really like the menu in this alphabetical order system. Can I use something else instead? Like what is in Nova launcher, just a normalenu, nothing else.
Thanks for the help in advance.
Cheers!
the first issue is related to kernel... when cm will be based on the kernel released from xiaomi, the problem will be solved. don't worry, developers are working on it
I found the a method and it is working:
https://www.androidfilehost.com/?fid=457084094631642269
GrooveHero said:
Hi all.
I installed cm13 on my mi5 pro yesterday. Looking good so far. I only have minor issues. The first and most important is I can't swap the back and recent button. I've already got used to miui method ( back on the right, recent button on the left).
How can I change them on cm13? Unfortunately closed+gravity can't help me, because after installing them my banking app (Barclay's) thinks that my phone is rooted and closes with an FC. I've also tried the buttons on the screen option, but in this way I lose screen size, though I can change the buttons I believe.
The other small issue is that I don't really like the menu in this alphabetical order system. Can I use something else instead? Like what is in Nova launcher, just a normalenu, nothing else.
Thanks for the help in advance.
Cheers!
Click to expand...
Click to collapse
For the drawer style you can change that in the launcher's settings. Long press a free spot on your home screen, then press settings and change style to "compact".
This swaps the two capacitive buttons around to xiaomi setup instead of Google
you can also find it on this url: https://store.shade.sh/mi5/ from the unofficial cm13 weekly build thread if you do not wish to download it from myself
Thank you guys its working like a miracle.
Now I have another problem, but this time it looks massive.
So my problem is that cm13 is pre rooted when you install it. Well, I have no problem with it, but unfortunately my banking app ( Barclay's) has. I can't use it, because it says rooted device not supported. I've already checked developer options, and root access is disabled, but this doesn't help, I still have issues with the app. I tried flash SuperSU+binaries from twrp, opened app after flash and use full unroot, same problem, banking app thinks my phone is still rooted. I'm thinking about trying out the slim (aosp based) ROM if I can't find any working method.
Can you guys help me with this?
Thank you one again
GrooveHero said:
Thank you guys its working like a miracle.
Now I have another problem, but this time it looks massive.
So my problem is that cm13 is pre rooted when you install it. Well, I have no problem with it, but unfortunately my banking app ( Barclay's) has. I can't use it, because it says rooted device not supported. I've already checked developer options, and root access is disabled, but this doesn't help, I still have issues with the app. I tried flash SuperSU+binaries from twrp, opened app after flash and use full unroot, same problem, banking app thinks my phone is still rooted. I'm thinking about trying out the slim (aosp based) ROM if I can't find any working method.
Can you guys help me with this?
Thank you one again
Click to expand...
Click to collapse
Root cloak via xposed maybe? Not sure if still supported though!
Harrynowl said:
This swaps the two capacitive buttons around to xiaomi setup instead of Google
you can also find it on this from the unofficial cm13 weekly build thread if you do not wish to download it from myself
Click to expand...
Click to collapse
great! thank you very much!
Harrynowl said:
Root cloak via xposed maybe? Not sure if still supported though!
Click to expand...
Click to collapse
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
GrooveHero said:
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
Click to expand...
Click to collapse
I'm unsure, sorry!
GrooveHero said:
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
Click to expand...
Click to collapse
Try using shade.sh's userbuilds. They are built without built in root. They are under the category "userbuilds" on his website.
Success!
I had to install aosp to to realize what's the problem here. After I did that the same problem happened.: Banking app says my phone is rooted. So I tried doing the same methods on aosp what I did on cm13, except Xposed+gravity because I knew my apps gonna FC. So I tried safe unroot apk from play store, no luck. I also tried this app the night before.
Then i thought maybe I should enable root in developer options, because yesterday morning with this was a half success, Barclays mobile banking app( debit card) said, the device is rooted, I touched ok, then it started without any problems. It was only half success, because the other app Barclaycard (credit card) didn't work, same problem: the phone is rooted. So I tried out the following, and that was the complete success:
Enabled root access for apps only in dev options than i started safe unroot from play->everything's working like a charm.
Thank you guys for help!
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Bassem AbdullMonem said:
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Click to expand...
Click to collapse
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
bogarty said:
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Bassem AbdullMonem said:
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Click to expand...
Click to collapse
Truthfully, your best bet while you have your device up and running is to backup all your apps and data with something like Titanium Backup or even sync them with the Samsung Cloud. The cloud reinstalls everything and sets your device configuration back to the way it was. Then, if you have a custom rom installed, wipe it in TWRP and reinstall it. If you're running stock, then don't wipe. Just go to the Sammobile website, download the latest firmware for your specific device and reflash it to the device with Odin. This generally fixes all system problems with a device, while preserving your app data.
Alternately, you can also try searching XDA for kernels that are made for your device that have a higher performance and try installing one of those to see if anything improves. As far as the screen going off early too, you can always check in "Settings/Display/Screen Timeout" to see what it's set for and change it to the max screen on time. It really sounds like you may have broke something system wise with Xposed or an Xposed module though, which is very easy to do, so I would really recommend starting over fresh. If you're on stock especially, as you really have nothing(data wise) to lose.
Sent from my SM-N920T using Tapatalk