Phone Activation - Sprint HTC One (M7)

Hi,
Recently I soft bricked my phone due to flashing a gsm rom. So I managed to un-softbrick(?) my phone and just flashed CM11.
My problem is, I can't seem to activate my phone through CM 11. Can anyone help me with getting back to the stock rom and activating my phone or activate my phone while still on CM 11.
Much thank!

Related

[Q] Help Needed...galaxy s that reset itself

Hi all,
I have a problem with a galaxy S that resets itself.. It happend about 5 times now that when i wake up everything is gone incluiding my phonenumbers. How can i prevent this.
Note: The phone is locked on a provider therfore i can't update the phone.
Thanks for helping me out.
J. de Munnik said:
Hi all,
I have a problem with a galaxy S that resets itself.. It happend about 5 times now that when i wake up everything is gone incluiding my phonenumbers. How can i prevent this.
Note: The phone is locked on a provider therfore i can't update the phone.
Thanks for helping me out.
Click to expand...
Click to collapse
two options
1. if you still has warranty go back to the provider and get the phone fixed / replaced
2. take the journey to unlock and flash custom ROMS. this was you not only solve your problem but also be on latest s/w like ICS. it is the same version running on Galaxy Nexus, SGS3 and One X

[Q] CM No service

After flashing CM 10.1 onto my HTC One Sprint everything seemed to be fine.
I flashed the CM, then the GApps, then the boot.img, went through the setup, and all seemed well.
After turning my Wifi off for a moment I realized that I had no service what so ever.
I have rebooted and re-flashed everything a few times and the IMEI number shows up just fine starting with 99.
Anyone know how to get my phone back to working like a phone?
[SOLVED]
after trying many a more ways I got it to work by going to the phone dial-er and typing *#*#4636#*#* to get to the phone info settings.
I changing the setting from Unkown to GSM/CDMA auto and all is fine.

[Q] D4 does not read vodafoneNL SIM anymore

Hi,
A couple of days ago I purchased a Motorola Droid 4 on a marketplace in Holland.
The phone was bought in New York and the guy i bought it from, had rooted the device to Cyanogenmod 10.2. It was also running safestrap recovery. When he bought it the phone had a lock from verizon.
As I did not know anything about rooting and didn't understand how to use my phone i started doing some research and e-mailed the guy i bought it from. At first everything was working properly (appart from the wifi sometimes ) it only did not have gapps on it. At that time i had service on the phone.
After understanding a little how to use safestrap and how to flash the device, i found out the stock rom had been flashed to cyanogenmod 10.2 aswell. I flashed a rom-slot to cyanogenmod 10.2 with gapps again and finally thought the phone was working properly, including google applications. But now i did not have any Phone service. In the slider menu it says No service/No sim card.
Could someone please help me? I'm not sure what to do know ..
Kind regards,
Wouter

[Q] Phone stock on Android updating screen

Good day all, first timer posting but have been reading the forms for a while now.
I have a major problem with my galaxy note GT- N7000. I have browed through the forms and have not seen a problem like mine. I really need help with my phone.
Problem:
The phone is rooted with paranoid android rom; current version PA_n7000-3.60. I have been using this for over a year with no problem, when all of a sudden the phone goes into android update screen and ever since been on that screen whatever I do. I never tried to update the rom or anything when this happened, just found it like that. All auto update are turned off.
I have tired installing the rom again using CWM and even tried installing the latest update still the problem persists.
I don’t want to format the phone because I have some very important information I will lose if I do. Cannot back up using CWM, getting error messages, cannot get access to phone via connection to my computer. I am in a jam and really need help with this.
Thanks.

Phone doesn't read my SIM

I have been using CM11 (14-03-2014 I believe), without major problems until yesterday. Sometimes my phone seemed to disconnect from my SIM and I had to re-enter my pin code to reconnect to my operators network. But as of yesterday my device doesn't seem to recognize the SIM card, It doesn't ask for a code at all and can't make any connection whatsoever. I didn't change a thing, this problem started out of the blue.
I wiped cache and dalvik, updated to the latest CM nightly (08-05) but that didn't make any difference. In other threads I read about the baseband that might need an update, but I can't check which version I have now because when I try to enter the hidden menu I get the no network connection error. The strange thing is that CM11 has worked with (I guess) the stock baseband.
Is my phone tripping or could it be that my SIM card is broken?
Help and thoughts will be very much appreciated
Try it on stock to be sure about it.
After some searching I found a phone that could fit a regular SIM card, a Blackberry 9900. My SIM worked perfect in this phone, so that is not the problem.
I Also did a complete wipe and installed a stable version of CM 10.1.3, but that didn't seem to help. I hoped that a downgrade would have done the trick. I might try a ICS ROM or the stock firmware, but I kind of lost hope and i'm starting to think this problem is hardware related in stead of software. I'll report back with results on stock firmware and the ICS ROM.
How can I make sure the SIM reader in my phone is working properly?
Sorry for double posting, but I got an update:
SIM wasn't working with ICS so I decided to go back to the stock ROM. However, when I tried to flash V20B.kdz with KDZ_FW_UPD, the program got stuck at wParam=2010 and iParam=210. The phone is now stuck in S/W Update mode, and I haven't found a way to restore it yet. I will argue a little more with my phone when I get back from work, I'll open a new thread on how to unbrick when I can't do it myself.
Beunhof said:
Sorry for double posting, but I got an update:
SIM wasn't working with ICS so I decided to go back to the stock ROM. However, when I tried to flash V20B.kdz with KDZ_FW_UPD, the program got stuck at wParam=2010 and iParam=210. The phone is now stuck in S/W Update mode, and I haven't found a way to restore it yet. I will argue a little more with my phone when I get back from work, I'll open a new thread on how to unbrick when I can't do it myself.
Click to expand...
Click to collapse
My good friend i know i probably come 2 late but here is the anser 4 future users!!
http://forum.xda-developers.com/showthread.php?t=2069723
its supose to freese in ther!! (not ther but ....)
I have the same problem, and exactly the same error at reflash.
Dead end. Buy a new phone .
I tried to flash it about 80 times. One guy from a gsm repair has a bit luck and make it work at the first, but then, when he wanted to repair my imei, the phone stucked again in S/W Upgrade.

Categories

Resources