Related
SM-T700 UK version stock 5.0.2
1. Root using Kingroot 4.5
2. ONLY now !!! install and run Super-Sume
3. Update SuperSu binaries
That's all : you have root, SuperSu and Knox still "O" and Kingroot it's gone...
Would people please post the full build version of the firmware they have success or failure with, so others are aware of which ones work.
has this method been verified by other users?
Share your experience please!
It's brand new...
Verified by myself
Have you maintained root after reboot?
ashyx said:
Already tried it, v4.5 is posted in my kingroot thread, didn't work on lollipop for t805.
Neither did supersu me, binary always fails to update, once it did manage after several tries, but root is lost after reboot.
Supersu me is just the same script as posted in the kingroot thread. Root always lost after reboot.
Have you maintained root after reboot?
Click to expand...
Click to collapse
Just following your thread, messing with Kingroot 4.5 (from your tread) I obtained root.
Also someone there suggesting SuperSume to remove Kingroot.
I use it and that's it
Yes the root it's permanent
stefan.pilsu said:
Just following your thread, messing with Kingroot 4.5 (from your tread) I obtained root.
Also someone there suggesting SuperSume to remove Kingroot.
I use it and that's it
Yes the root it's permanent
Click to expand...
Click to collapse
Can you then install SuperSu or do you need to keep the SuperSume?
Anyone else confirm this method ?
louiscar said:
Can you then install SuperSu or do you need to keep the SuperSume?
Anyone else confirm this method ?
Click to expand...
Click to collapse
Super-Sume install SuperSu
Update binaries and done
I waiting also others to confirm
stefan.pilsu said:
I waiting also others to confirm
Click to expand...
Click to collapse
Ok Thanks for putting this up, if it's reliable it will save a lot time for many.
..guys try install first busy box while with kingo root, then install supersu. update binary. if successful,
..uninstall kingoroot . reboot supersu rules!!!!!!
angelshie said:
..guys try install first busy box while with kingo root, then install supersu. update binary. if successful,
..uninstall kingoroot . reboot supersu rules!!!!!!
Click to expand...
Click to collapse
Super_Sume make all this "work" with one click !
Ok guys, thanks for confirming, Sweet
Thanks for the tip. This worked perfectly. I installed Kingroot 4.5. When Kingroot runs scroll down and press "Try it" and it rooted. I then immediately installed Busybox from the Google Play store and ran the smart installer. After a successful install of Busybox, I then installed Super-Sume from the Play store. I ran Super-Sume and it installed Super SU and removed Kingroot. After that, I opened Super SU and allowed it to update the binary. Rebooted. I checked root with Root Checker app and checked Knox with an app called Knox Status on the Play store. Root is still active and Knox is still at "0". I powered off, then restarted again. Root has stayed.
I did this on a brand new US region SM-T700 pulled straight from the box and updated to Lolilipop from OTA.
System Version:
SM-T700
LRX22G.T700XXU1BOE3
*ROOT WORKING !! SMT-700 OTA 'lollipop'
Confirmed working on Lollipop NEE-T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits go to the devs of Kingroot, Chainfire and Supersu me.
ashyx said:
Confirmed working on Lollipop T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits got to the devs of Kingroot, Chainfire and Supersu me.
Click to expand...
Click to collapse
I've told you ...
ashyx said:
Confirmed working on Lollipop T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits go to the devs of Kingroot, Chainfire and Supersu me.
Click to expand...
Click to collapse
It does not appear to work on T707a with 5.0.2.
Maybe ashyx could help.
What exactly didn't work for you ?
stefan.pilsu said:
I've told you ...
Click to expand...
Click to collapse
Do you think this is likely to work for KitKat ANL1? I already downgraded as part of Ashyx's tutorial to ANF7.
My only reservation to going to Lollipop is that I want to use the Xposed framework which I think is still in it's infancy for 5.x or still not compatible.
So before this my options are to keep the original Kitkat by Flashfire - ANL1 or go directly to Lollipop. For the latter I could just get the OTA and do this method now. But not sure if I go to ANL1 kingroot will work as easily
If not I'll continue in the normal way I guess.
Once you have root with Kingroot install Super Sume and run it.
Kingroot 4.5 from ashyxs tread works for me.
Super-Sume just install busybox, SuperSu and get rid of Kingroot.
Why not use Flashfire to install whatever you want: KK or L ?
Hello guys,
In recent days, I had seen that some members have issue regarding working xposed that was released previous.
Today, I got a new version of working xposed which is patched by @shakalaca
all credit goes to original developer, I am just posting it here.
I tested it on ze550kl.
it also works on most zenfone series.
prerequisite are same as it was before.
phone must rooted
busy box must installed
root permission must provided to adb shell when asked
just extract archive & first run remov exposed freamework, if there is any non working xposed framework is installed & uninstall xposed apk if installed.
after that reboot system.
not to install frame work first click install xposxed frame work, let process complete & reboot system.
after that click install xposed installer.
now you have working xposed for sdk21 v78 arm64.
Xposed
Work perfect! Thanks!!!
Perfect work. Thanks
rajlko said:
Hello guys,
In recent days, I had seen that some members have issue regarding working xposed that was released previous.
Today, I got a new version of working xposed which is patched by @shakalaca
all credit goes to original developer, I am just posting it here.
I tested it on ze550kl.
it also works on ZenFone 2 2.20.40.13x and ZenFone Selfie 1.13. 40.661
prerequisite are same as it was before.
phone must rooted
busy box must installed
root permission must provided to adb shell when asked
just extract archive & first run remov exposed freamework, if there is any non working xposed framework is installed & uninstall xposed apk if installed.
after that reboot system.
not to install frame work first click install xposxed frame work, let process complete & reboot system.
after that click install xposed installer.
now you have working xposed for sdk21 v76 arm64.
Click to expand...
Click to collapse
It should be pointed out that on my phone query window pops root rights, only after you enter in supersu (my system cant anwer permission adb shell, while manually entered into the application SuperSU)
post updated.
Works great !
edit1
Snapprefs works now
roman.kaskad said:
It should be pointed out that on my phone query window pops root rights, only after you enter in supersu (my system cant anwer permission adb shell, while manually entered into the application SuperSU)
Click to expand...
Click to collapse
sometime pop up for root rights delay due to some mismatch, like you are using patched firmware or boot image of any other system.
Pop window for root right will works well if you have original kernel installed in your phone.
e.g. if you have ze551kl & you are using boot image of ze550kl for root your phone, then you will have this issue.
In patched firmware you may face this issue due to same issue.
Now all the ZE551KL users have to use the ze550kl root method to gain root.
Does that mean all ze551kl users will face the root rights issue?
Sent from my ASUS_Z00TD using Tapatalk
yvg107x said:
Now all the ZE551KL users have to use the ze550kl root method to gain root.
Does that mean all ze551kl users will face the root rights issue?
Sent from my ASUS_Z00TD using Tapatalk
Click to expand...
Click to collapse
Not at all,
it happens some time.
sometime you need to open super user & after that window popup for root right, it happens due to su also.
dose it working with new version .763
BTiwari said:
dose it working with new version .763
Click to expand...
Click to collapse
Yes
roman.kaskad said:
It should be pointed out that on my phone query window pops root rights, only after you enter in supersu (my system cant anwer permission adb shell, while manually entered into the application SuperSU)
Click to expand...
Click to collapse
I had the same issue.. But i fixed it by going to auto start manager... in pre-loaded apps... And switching 'Super Su'option to 'on'...
I think as the app didnt had the the permission to auto start... Prompt only comes only when we go tp app manually.... Anywayzz it worked for me...
BTiwari said:
dose it working with new version .763
Click to expand...
Click to collapse
yes.
flash official xposed-v79-sdk21-arm64.zip normally work fine for me. not patched version.
my decive: ze551kl
not working?
I have the .763 stock firmware on the ZE551KL and rooted with instructions from this thread. It seems to install and "Android is upgrading" pops up, but then there is no Xposed app to install modules from and I've tried installing Xprivacy and BootManager and both say Xposed is not installed. So I guess it didn't work
thefallenghost said:
I have the .763 stock firmware on the ZE551KL and rooted with instructions from this thread. It seems to install and "Android is upgrading" pops up, but then there is no Xposed app to install modules from and I've tried installing Xprivacy and BootManager and both say Xposed is not installed. So I guess it didn't work
Click to expand...
Click to collapse
when you unzip file,there will be three bat files, installxposedframvwork, Installxposedinstaller & removexposedframework.
If you have rooted & install custom recovery, then you may flash zip file from recovery.
if you have not install custom recovery, then unzip file, first run installxposedframework, let process complete, provide root access from you phone when asked, let phone reboot.
after that run installxposedinstaller, let process complete, now you have xposed apk in you phone.
you may also download it from google play store or official thread from developer.
---------------------------------------
rajlko said:
when you unzip file,there will be three bat files, installxposedframvwork, Installxposedinstaller & removexposedframework.
If you have rooted & install custom recovery, then you may flash zip file from recovery.
if you have not install custom recovery, then unzip file, first run installxposedframework, let process complete, provide root access from you phone when asked, let phone reboot.
after that run installxposedinstaller, let process complete, now you have xposed apk in you phone.
you may also download it from google play store or official thread from developer.
Click to expand...
Click to collapse
Ok. When you say I have the apk in my phone, where exactly is it?! I cannot find it... Edit: Nevermind, I had forgotten to run the installer (faceapalm). Sorry...
hi
I can't reboot from Xposed Installer
When I try and reboot through the Xposed Framework I get the following error message everytime:
tmp-mksh: <stdin>[5]: /data/data/de.robv.android.xposed.installer/cache/busybox-xposed: not found
Reboot failed. Please use the device's normal reboot function.
I had busybox installer.
Not sure what else I'm doing wrong?
pedrazadixon said:
flash official xposed-v79-sdk21-arm64.zip normally work fine for me. not patched version.
my decive: ze551kl
Click to expand...
Click to collapse
Thanks for that.
installed and working on Ze551kl with stock rooted rom.
I am now have Adblock installed. woohoo!
ericpeacock79 said:
Thanks for that.
installed and working on Ze551kl with stock rooted rom.
I am now have Adblock installed. woohoo!
Click to expand...
Click to collapse
Last version v85. Work fine.
Only flash the lasted zip.
Hello everyone,
I'm having an issue - I wasn't able to flash the newest extracted firmware in the development section so I went ahead and just ran the full RUU. I've been running custom roms for years and I decided that maybe I just wanted to run stock rooted for a while so I unlocked my bootloader again, flashed the most recent TWRP and installed the most recent SuperSU zip.
Unfortunately it does not seem to have rooted my phone. SuperSU is indeed installed in the system folder and it prompts for root permission when I use root apps, but even when I grant permission the apps cannot obtain root access. What happens is it looks like they are going to get root access, the phone slows down a bit for a second, and then I get an error message from the app in question saying that either my phone isn't rooted or that root permission has been denied. If I open SuperSU, it lists all of my root apps with the green hashtag indicating that permission is granted.
Am I correct in assuming that installing SuperSU did not root my phone? If so, is there a way to root without installing a custom rom?
For clarification, this is all on the most recent RUU, software version 6.23.651..10, Lollipop 5.0.2
Thanks in advance.
Which version of SuperSU are you flashing?
Sloth said:
Which version of SuperSU are you flashing?
Click to expand...
Click to collapse
Well I'm a dolt, I was using v1.69 but now I see that is a very old version. Going to try 2.46 right now, thanks.
Edit: Same issue on 2.46 :/
For anyone still looking at this thread, I was able to achieve root by flashing the newest SuperSU, version 2.52 which is actually still in beta and therefore not offered if you go to the main portion of the SuperSU website.
SuperSU v2.65 is the current stable offering
Im trying to get viper4android installed on stock kernel (t817t). Ive searched high and low. All attempts have failed. I have switched the kernel to permisive, flashed all the build prop mods.
Has anyone got it to work?
Sent from my SM-T817T using Tapatalk
llawen said:
Im trying to get viper4android installed on stock kernel (t817t). Ive searched high and low. All attempts have failed. I have switched the kernel to permisive, flashed all the build prop mods.
Has anyone got it to work?
Sent from my SM-T817T using Tapatalk
Click to expand...
Click to collapse
Did you gave it storage permission on Application Manager?
follow these instructions, i did and have it working on both my Tab S2 and S7 Edge
http://www.droidviews.com/enjoy-viper4android-on-galaxy-s6-and-s6-edge/
I flashed one of the v4.8 zips from this thread http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 (I think it was the Beats Universal version near the bottom) and V4A works great. Dolby Atmos isn't working however, fc every time I open it. I think it's fixable but I haven't really messed with it because I don't listen to music on my S2 very often and I'm happy with just Viper.
Flash this
Same for me, I did a lot of things just with no luck. So I decided to make a factory reset, clean install the new MM update trough Odin, then install TWRP and flash SuperSu zip.
Then I found this THREAD made for the s7 and found this ZIP inside the replies, the flashed it and worked like a charm.
Instructions to install a working V4a (pay attention because it's extremely difficult):
1-> Hard factory reset. (just take the tab back to stock)
2->Update to MM with odin if u want (I don't know if it works on Lollipop)
4->Flash TWRP through Odin
5->Flash SuperSu through TWRP (this will root the tab)
6->Install Busybox from Google play
7->Flash this zip through TWRP.
5->Done
Not difficult, just joking.
Let me know if it worked for you. If you need more instructions about installing MM just go to my post if you want.
miguimercadob said:
Same for me, I did a lot of things just with no luck. So I decided to make a factory reset, clean install the new MM update trough Odin, then install TWRP and flash SuperSu zip.
Then I found this THREAD made for the s7 and found this ZIP inside the replies, the flashed it and worked like a charm.
Instructions to install a working V4a (pay attention because it's extremely difficult):
1-> Hard factory reset. (just take the tab back to stock)
2->Update to MM with odin if u want (I don't know if it works on Lollipop even )
4->Flash TWRP through Odin
5->Flash SuperSu through TWRP (this will root the tab)
6->Install Busybox from Google play
7->Flash this zip through odin.
5->Done
Not difficult, just joking.
Let me know if it worked for you. If you need more instructions about installing MM just go to my post if you want.
Click to expand...
Click to collapse
Works fine
Sent from my SM-T710 using XDA-Developers mobile app
miguimercadob said:
Same for me, I did a lot of things just with no luck. So I decided to make a factory reset, clean install the new MM update trough Odin, then install TWRP and flash SuperSu zip.
Then I found this THREAD made for the s7 and found this ZIP inside the replies, the flashed it and worked like a charm.
Instructions to install a working V4a (pay attention because it's extremely difficult):
1-> Hard factory reset. (just take the tab back to stock)
2->Update to MM with odin if u want (I don't know if it works on Lollipop even )
4->Flash TWRP through Odin
5->Flash SuperSu through TWRP (this will root the tab)
6->Install Busybox from Google play
7->Flash this zip through odin.
5->Done
Not difficult, just joking.
Let me know if it worked for you. If you need more instructions about installing MM just go to my post if you want.
Click to expand...
Click to collapse
Finally this worked for me on the first hit, after spending hours installing other v4a releases.. .
(not flashed the zip with odin.... Flashed it in TWRP)
Thanks!
miguimercadob said:
Same for me, I did a lot of things just with no luck. So I decided to make a factory reset, clean install the new MM update trough Odin, then install TWRP and flash SuperSu zip.
Then I found this THREAD made for the s7 and found this ZIP inside the replies, the flashed it and worked like a charm.
Instructions to install a working V4a (pay attention because it's extremely difficult):
1-> Hard factory reset. (just take the tab back to stock)
2->Update to MM with odin if u want (I don't know if it works on Lollipop)
4->Flash TWRP through Odin
5->Flash SuperSu through TWRP (this will root the tab)
6->Install Busybox from Google play
7->Flash this zip through TWRP.
5->Done
Not difficult, just joking.
Let me know if it worked for you. If you need more instructions about installing MM just go to my post if you want.
Click to expand...
Click to collapse
Thx so much! Worked perfectly. Although all i did was search for the file name on Google (cuz the owner of the file had it in his trash bin) and flash w twrp cuz my rom is still stock and I had already done everything else long ago.
If any future ppl need the file, here it is: http://d-h.st/YKOZ
And if that link turns up dead eventually, search this file name on Google, there should still be one out there somewhere
ViPER4Android_FX_A4_6.0.1_New
7.1.1 anyone ?
hello dudes!
the file from above worked perfectly on 6.0.1 for me
just updated to 7.1.1 and as expected this version doesn't work on 7.1.1
anyone out there who managed to get viper working on 7.1.1
ROM on SMT810
https://forum.xda-developers.com/tab-s2/development/rom-resurrection-remix-t3508176
Thanks !
SOLVED !
Viper installation zip
&
this Busybox works aswell, if you are not on x86
from original post
BTW : damn ugly UI
06.06.2016
Hey,
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Happened to me today as well. Xposed claimed there is a module update (although the only module I had is lucky patcher, and that wasn't updated). After a reboot, I lost root access and custom recovery...
Happened to me since a week ago... Anyone has any fix available for this?? Please help..
I have same issue
I was trying to re-root:
Flash stock system.img (june security update)
Flash stock boot.img (june security update)
Flash supersu
Flash elementalX
No profit ☹
I’m using:
twrp-2.8.6.0-shamu
ElementalX-N6-3.16
Systemless supersu 2.74 ( on I have 2.65 same issue)
evaldbiz said:
06.06.2016
Hey,
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Click to expand...
Click to collapse
You need to root
Frist flash recovery custom example TWRP next flash file zip application su 2.74-2 in TWRP ...
This happened to me too. I followed the procedure New Root Method For 5.1.1 w/o custom kernel. It worked for 3 weeks, and then without warning root was gone. Exactly same behavior as OP.
I Flashed SuperSU again from TWRP recovery, and have root again. But I want to understand why this happened so I can prevent it. I don't get OTA updates, and automatic updates are disabled. What could "break" the systemless root without causing a request I would have to allow? I have three applications enabled for root in SuperSU Pro: Adblock Plus, EX FIle Explorer Pro, and Titanium Backup.
Hey,
I have the same pb with GN4 6.01
i fix it with super su 2.68 with twrp-3.0.2-0-trltexx.img, clean dalvik cache et cache
reboot
open su and go update binarie on google play. (update 2.76 stable)
Test du su avec ESexplorer
It 's work
evaldbiz said:
06.06.2016
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Click to expand...
Click to collapse
I lost root as well! Im on note 5 6.0.1. I had been doing fine until I flashed the nexus launcher. The launcher flashed properly but lost root after that. Ive tried to re-root again and I cant because 1. I lost TWRP! 2. My pc wont read my phone even though I installed and unistalled the samsung drivers over and over. When I install the drivers it initially works but once I turn my phone off it wont work again! Anyone know how to fix it!?