Hi all, I turn to the experts. I tried to Flash on my Ativ S this rom http://forum.xda-developers.com/showthread.php?t=2735495 with wp8 smd binary
In the first folder I put the .wp8 taken from GDR3 stock and the second I put the .mbn file then I deselected all partitions leaving only "csc" as explained in the post and I did start. At the alert, I pressed no.
At the end gave me this information:
[Channel 0] Channel Write CSC Start date!!
[Channel 0] Channel ITV CSC data Console.write Success!!
[Channel 0] Partition info does not Match!
[Channel 0] Binary Download complete!
I rebooted and done hard reset but nothing has changed ... the phone is returned to the original losing interop-unlock and a few tweaks done by wph-tweek previously
in your opinion what could be wrong??
I state that I edited the file .mbn with a csc ITV
Thanks to whom I will respond
Related
passing strings to a sbl i got some interesting text:
Code:
-----------------------------------------------------------
Samsung Secondary Bootloader (SBL) v3.0
Copyright (C) Samsung Electronics Co., Ltd. 2006-2010
Board Name: %s %s
ARIES
REV 03
Build On: %s %s
Jul 30 2010
09:53:23
boot_kernel
loadkernel
boot
command_loop
SBL>
%s: parse command error! (%s)
Autoboot (%d seconds) in progress, press any key to stop
Autoboot aborted..
__Re_partition
%s: undefined code for format.
%s: write virtual pit image.
%s: write bootloader images to NAND!
%s: format failed..
Re_partition
%s: magic code(0x%x)
loke_init
%s: file system init failed..
%s: j4fs_open success..
%s: j4fs_open failed..
%s: bye~ bye!
main
%s: booting stop.
%s: booting stop and power off..
I9000XXIL
console=ttySAC2,115200
/mnt/rsv
setting param.serialnr=0x%08x 0x%08x
setting param.board_rev=0x%x
bootmode=2
bootmode=3
setting param.cmdline=%s
argv[%d] : %s
value : %d
Invalide Parameter Name
setenv
valid magic and version 2 ...
invalid magic and version 2 ...
saveenv
save %s, size: %d
param.blk
save %s successfully.
PARAM Rev %d.%d
%s : %d
%s : %s
printenv
load_lfs_parameters
%s valid magic code and version.
load_lfs_parameters invalid magic code and version
boot parameter file does not exist ..
make new boot paremeter file ..
/mnt/rsv
load_debug_level
debug_level.inf
%s reading debug level from file successfully(0x%x).
debug level file does not exist ..
debug level value is incorrect!! Set default level (LOW)..
get_debug_level
%s current debug level is 0x%x.
There're no available commands.
* Help : %s
* Usage : %s
There's no command
Following commands are supported:
* %s
To get commands help, Type "help <command>"
help
Rebooting...
reset
Code:
open
close
erasepart
eraseall
loadkernel
showpart
bbm add partition start
addpart
delpart
savepart
fsr_bml open error
error return value %x
bbm_erase_all
some of them even look like commands, anyone knows if there is some use for this?
in boot.bin:
Code:
-----------------------------------------------------------
Samsung Primitive Bootloader (PBL) v3.0
Copyright (C) Samsung Electronics Co., Ltd. 2006-2010
Error Occurs During Boot. Please ReBoot.
FSR_BML_Init Error
BML_Open Error
BML_GetVolInfo Error
BML_LoadPIEntry Error! Part_ID: %d
+n1stVPN %d
+nPgsPerBlk %d
BML_Read Error
ERROR.. Bootable SBL doesn't exist ..
PBL found bootable SBL: Partition(%d).
The input address don't need a virtual-to-physical translation : %08lx
""DD
UPCH
LPCH
LPCH
UPCH
[B]e-fused[/B]
i wonder what e-fused is for, and if its related to e-fuse: http://en.wikipedia.org/wiki/EFUSE
How did you got this? UART, jtag?
that's a dump of the PBL and SBL from memory into a file, then the Linux "strings" command was run on the file.
I've used search for UPCH and found this thread.
1.
Any idea what UPCH means?
2.
I can't see Thanx button for luismanson...
Maybe my Browser...
Thanx in advance.
Best Regards
Please.
Any news about UPCH?
I need this for JTAG... maybe.
But I don't know what it is...
http://www.ort-jtag.com/blog/?e=10
For instance it is visible in this Video...
But I have an RIFF Box... not ORT... or Medusa seems also to "repair" UPCH...
It seems Bootloader related...
Thanx in advance.
Best Regards
Im stuck at the bootloader screen and is saying flash failed. I have tried the fxz method and the forever root also. In the fxz it tries to flash but fails after and 30 sec. I'm trying to get it to scick so I can send it back to Verizon
Sent from my ADR6425LVW using xda premium
Try the path saver. Awesome script! I would find the cdt.bin and how to fastboot that and go ahead and put the .886 radio file on your SD card. that should more than fix you up.
Bionic Path Saver 1-Click Method
iosmacman said:
Im stuck at the bootloader screen and is saying flash failed. I have tried the fxz method and the forever root also. In the fxz it tries to flash but fails after and 30 sec. I'm trying to get it to scick so I can send it back to Verizon
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
What else does it say? There should be more info on the screen than just flash failure. You should have some some stuff at the bottom like "Invalid CG: boot" or something like that. This will help us figure out which file(s) you need to flash.
Also, a little background, such as what you were flashing and what you were coming from would help the effort.
I have tried the one path deal and it acts like it pushes the files but it does nothing just like in forever root I choose option 4 and it says it pushes the files and says it rebooting but the phone does nothing. It's like the phone just isn't getting it
Sent from my ADR6425LVW using xda premium
This is from rsd when i try to do the fxz
12/26/11 15:40:22 New Log Started For Software Download.
12/26/11 15:40:35 The FlashLog key is turned off.
12/26/11 15:40:37 Multi upgrade started for 1 phones
12/26/11 15:40:37 [Device ID: 0] 1/14 erase cache
12/26/11 15:40:38 [Device ID: 0] 2/14 erase userdata
12/26/11 15:40:39 [Device ID: 0] 3/14 flash lbl "lbl"
12/26/11 15:40:40 [Device ID: 0] 4/14 flash logo.bin "logo.bin"
12/26/11 15:40:41 [Device ID: 0] 5/14 flash ebr "ebr"
12/26/11 15:40:42 [Device ID: 0] 6/14 flash mbr "mbr"
12/26/11 15:40:43 [Device ID: 0] 7/14 flash devtree "device_tree.bin"
12/26/11 15:40:45 [Device ID: 0] 8/14 flash system "system.img"
12/26/11 15:42:14 [Device ID: 0] 9/14 flash boot "boot.img"
12/26/11 15:42:16 [Device ID: 0] 10/14 flash recovery "recovery.img"
12/26/11 15:42:18 [Device ID: 0] 11/14 flash cdrom "cdrom"
12/26/11 15:42:23 [Device ID: 0] 12/14 flash preinstall "preinstall.img"
12/26/11 15:43:19 [Device ID: 0] 13/14 flash webtop "grfs.img"
12/26/11 15:47:25 [Device ID: 0] 14/14 flash radio "radio.img"
12/26/11 15:47:31 [Device ID: 0] reboot
12/26/11 15:54:43 000004e4 Phone.cpp 1490 0 ERROR Waiting for phone's handle is setted successfully after restart [430000 ms] completion. failed
12/26/11 15:54:43 [Device ID: 0] Please manually power up this phone.
What does it say at the bottom of your phone screen? on the fastboot screen?
It says flash failure at the top, it should list something else.
What were you trying to do? Go into more detail of what you were doing?
It can take several minutes to flash and it to reboot. were coming from .901?
did you flash the .901.zip? I was bricked this weekend and all I was missing was the cdt.bin file from .901 once and the radio file from .886 another time.
You may be closer than you think.
I has nothing at the bottom it looks like a normal fastboot screen but at the top it has flash failure. Im just trying to get it so i can send it back to verzion i just wanted to take it back to stock i was haveing problems with the volume rocker but now i have a phone that wont do anything .
Wheni try thr release root method and pick 4 is acts like it it pushing the files and says on the computer is is and when the phone is supposed to reboot it just flashes and goes back into bootloader. I will shut it down and turn it off and hold both volume buttons down and press power and then choose to reboot it just has the droid with the ! and i can say reboot and it goes to the bootloader screen
send it back to verizon anyway, i did when i messed up with my first bionic and they never said anything when i sent it back
You can try this. Don't know if it will help or not
http://rootzwiki.com/topic/13485-unbrick-your-bionic-here/
stelv said:
You can try this. Don't know if it will help or not
http://rootzwiki.com/topic/13485-unbrick-your-bionic-here/
Click to expand...
Click to collapse
i had exactly the same situation and that link was my lifesaver
Sent from my DROID BIONIC using xda premium
Yea that link comes in handy.
Hi, i installed TechPReview of Win 10 on my ativ s. But it doesnt work. So i want to go back to WP8. But when i try to flash, it stops at 39%
PHP:
[Channel 0] Channel Get TZ info !!
[Channel 0] Channel Get TZ WritePartitionData !!
[Channel 0] Channel Get WINSECAPP info !!
[Channel 0] Channel Get WINSECAPP WritePartitionData !!
[Channel 0] Channel Get RPM info !!
[Channel 0] Channel Get RPM WritePartitionData !!
[Channel 0] Channel Get UEFI info !!
[Channel 0] Channel Get UEFI WritePartitionData !!
[Channel 0] Channel Get PLAT info !!
[Channel 0] Channel Get PLAT WritePartitionData !!
[Channel 0] Channel Erase MainOS Partition !!
[Channel 0] Channel Erase Data Partition !!
[Channel 0] Channel Erase CrashDump Partition !!
[Channel 0] Channel Get EFIESP info !!
[Channel 0] Channel Get EFIESP WritePartitionData !!
Can some one help me
trytogetme said:
Hi, i installed TechPReview of Win 10 on my ativ s. But it doesnt work. So i want to go back to WP8. But when i try to flash, it stops at 39%
PHP:
[Channel 0] Channel Get TZ info !!
[Channel 0] Channel Get TZ WritePartitionData !!
[Channel 0] Channel Get WINSECAPP info !!
[Channel 0] Channel Get WINSECAPP WritePartitionData !!
[Channel 0] Channel Get RPM info !!
[Channel 0] Channel Get RPM WritePartitionData !!
[Channel 0] Channel Get UEFI info !!
[Channel 0] Channel Get UEFI WritePartitionData !!
[Channel 0] Channel Get PLAT info !!
[Channel 0] Channel Get PLAT WritePartitionData !!
[Channel 0] Channel Erase MainOS Partition !!
[Channel 0] Channel Erase Data Partition !!
[Channel 0] Channel Erase CrashDump Partition !!
[Channel 0] Channel Get EFIESP info !!
[Channel 0] Channel Get EFIESP WritePartitionData !!
Can some one help me
Click to expand...
Click to collapse
Try newer flasher (3.54). Many people with Ativ bricked their phones when downgrading from Win10M.
The problem is, Now it only vibrates when started, and I cant enter Download-Mode.
I've tried 3.54 before, but my phone does not appear, so I used the old flashing-tool
After flashing i have green screen with error :
security check fail : modem
On recovery logs i see this problem :
[Cheking pre-multi-scs2]
[start failed section]
sales_code = [EMPTY]
Carrier ID = [EMPTY]
[WARNING] Carrier ID Error
[WARNING] sales_code empty
Don't delete TA file.
What can i do to send "sales_code" and "carrier id" to device to fix this error?
I do not have backup of my EFS.
also all firmware have in PIT file record like this :
Partition Name: EFS
Flash FileName: efs.img.ext4
but in reality there is NO efs.img.ext4 file - in any of available firmware ...
my phone stuck at erecovery mode . i did flash it with new rom using the dc phoenix but it turn out failed.
here is the progress :
Build number: :COR-L29 9.0.0.193(SP53C636E2R1P12)
Model: COR-L29
Battery state: 4885mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: LOCKED
OEM get bootinfo:
locked
Process identifier:18080917
Getting build number...
Getting base version...
Getting cust version...
Getting preload version...
Erasing ver .. .
File size: 5,037,310,948 bytes
Current version(CURVER): CORC00B000
Writing rescue_recovery_kernel partition
rescue_recovery_kernel partition UPDATE ...OK
Writing rescue_recovery_ramdisk partition
rescue_recovery_ramdisk partition UPDATE ...OK
Writing rescue_recovery_vendor partition
rescue_recovery_vendor partition UPDATE ...OK
USB Device REMOVAL
Type: @OEM83.inf,%tplinkfastboot%;Android Bootloader Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&118960b2&0&2
Looking for device in upgrade mode...
USB Device INSERTION
Type: @OEM148.inf,%busfilter.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_107E
Instance id: 5&118960b2&0&2
COM11: DBAdapter Reserved Interface (COM11)
COM12: Android Adapter PCUI (COM12)
8/29/2019 3:56:10 PM Starting to write device in UPGRADE mode...
Device found: XTX7N18830004739
8/29/2019 3:56:38 PM start to write update file
File to update: UPDATE_SD.APP
File size: 5,037,310,948 bytes
Current version(CURVER): CORC00B000
Process identifier:18080974
Validating file...
Looking for attached port...
Preparing to write...
Writing file 1 of 43: SHA256RSA...OK
Writing file 2 of 43: CRC...OK
Writing file 3 of 43: CURVER...OK
Writing file 4 of 43: VERLIST...
Error downloading file 4 of 43
Error writing software
8/29/2019 3:57:16 PM Writing device finished with ERROR
anyone can help me with this ?