Database Develop

[Q] Exclamation with and Android logo

hey guys, im freaking out here.. i just tried to update my Acer Liquid S100 from v1.6donuts to v2.2froyo, i used the acer download tool and a froyo 2.2 bin. there was a problem on flashing/writing according to the download tool but then it re-do its process then i waited long and then the acer download tool went fine. My phone reboot and there are these small letter words that i failed to read then it proceed to the the screen having triange with an exclamation and an android.
dunno what to do, ill be killed if i wont fix this. please help me. thank you so much.
this is what i found on my logs of acer download tool:
=================================================================
===================== Debug Log Start !! ========================
=================================================================
Program version is : acer Download Tool [RD] v1.200 (20100206)
Process Starting Time is : 06 : 54 : 57
[FileChecking] : [Info] : DownloadDevInfo_Enable is 0
[FM] : [Info] : FM Ok!!
[DecomposeFile] : [Info] : File for Decompose is : C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05_d086697749f6ef4b8ab5d5058e68810b.bin
[DecomposeFile] : [Info] : partition.mbn OK!!
[DecomposeFile] : [Info] : dbl.mbn OK!!
[DecomposeFile] : [Info] : fsbl.mbn OK!!
[DecomposeFile] : [Info] : osbl.mbn OK!!
[DecomposeFile] : [Info] : amss.mbn OK!!
[DecomposeFile] : [Info] : appsboot.mbn OK!!
[DecomposeFile] : [Info] : dsp1.mbn OK!!
[DecomposeFile] : [Info] : NPRG8650.hex OK!!
[DecomposeFile] : [Info] : boot.img OK!!
[DecomposeFile] : [Info] : system.img OK!!
[DecomposeFile] : [Info] : userdata.img OK!!
[DecomposeFile] : [Info] : recovery.img OK!!
[DecomposeFile] : [Info] : initlogo.rle OK!!
[DecomposeFile] : [Info] : touch.bin OK!!
[FF] : [Info] : AMSS : 63
[FF] : [Info] : OS : 95
[VerInfo] : [Info] : merged os file is : Acer_LiquidE_4.002.08_EMEA-GEN1
[MergedOSFileClass] : [Info] : MergedOSFile Class is : A1
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[SerialPort] : [Info] : Discard in, out Buf !
[VerInfo] : [Info] : ph's amss is : A1-02.01.03
[VerInfo] : [Info] : ph's os is : 2.000.48_Acer_AB88_EMEA-CUS4
[PhoneClass] : [Info] : Phone Class is : A1
[CheckPortNumber] : [Info] : OS COM Port Number [COM13], Pass
[Lock_UnLock] : [Info] : Un-lock Port Start !
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[SerialPort] : [Info] : Discard in, out Buf !
[Lock_UnLock] : [Info] : Port Close and Dispose
[Lock_Unlock] : [Info] : Un-lock Port OK !!
-----------------------------------------------------------------
----------------- [Info] : Nv Backup Start ----------------------
-----------------------------------------------------------------
[NvtFile] : [Info] : .nvt for using is : C:\Documents and Settings\Rip.RIPTIDE\Desktop\acer Download Tool [RD] v1.200 (20100206)\A1_NvtFile.nvt
[NFS] : [Info] : IsPhoneConnected, try times is : 0
[NFS] : [Info] : Check_IsPhoneConnected(), return Value is : True
[NFS] : [Info] : UnlockSPC(), return Value is : True
[NFS] : [Info] : EnterIntoOfflineDigital(), return Value is : True
[NFS] : [Info] : Efs PreProcidure Succ !!
[NFS_Backup] : [Info] : in NvItem_Backup()
[NFS_Backup] : [Info] : encrypted .nvt file is in : C:\Documents and Settings\Rip.RIPTIDE\Desktop\acer Download Tool [RD] v1.200 (20100206)\A1_NvtFile.nvt
[NFS_Backup] : [Info] : Backup ForLoop is finished !
[NFS_Backup] : [Info] : IMEI is : 353509031639571
[NFS_Backup] : [Info] : .eqf file was written!!, Filename is : C:\A3_QCN\20111015\353509031639571.eqf
[NFS] : [Info] : Backup Nv Succ !!
-----------------------------------------------------------------
----------------- [Info] : Nv Backup Finish ---------------------
-----------------------------------------------------------------
[ChangeMode] : [Info] : Change mode Start !! [OS => AMSS]
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[SerialPort] : [Info] : Discard in, out Buf !
[ChangeMode] : [Info] : Port is Disposed
[UsbEvent] : [Info] : Wait UsbEvent [OS => AMSS]
[DetectPort] : [Info] : AMSS Port Found!! : COM16
[Hex] : [Info] : in UsbConnect(), TryTimes is : 0
[Hex] : [Info] : in UsbConnect(), Port open Ok.
[Hex] : [Info] : in UsbConnect(), Discard in, out buf OK
-----------------------------------------------------------------
----------------- [Info] : Hex file Start -----------------------
-----------------------------------------------------------------
[HexFile] : [Info] : .hex for using is : C:\Documents and Settings\Rip.RIPTIDE\Desktop\acer Download Tool [RD] v1.200 (20100206)\A1_NPRG8650.hex
[Hex] : [Info] : Hex's Receiver thread is ready !
[Hex] : [Info] : Hex's Transfer thread is ready !
[Hex] : [Info] : Reset UsbEvent_Hex
[Hex] : [Info] : In UsbAbort()
[Hex] : [Info] : In UsbAbort(), Discard InBuffer and OutBuffer - OK
[Hex] : [Info] : In UsbAbort(), Close and Dispose port - OK
[Hex] : [Info] : Now, wait UsbEvent
[Hex] : [Info] : Re-get AMSS Com Port is : COM16
[Hex] : [Info] : In ForUsbReconnect(), Port Open Ok !
[Hex] : [Info] : In ForUsbReconnect(), Discard in and out buffer Ok !
-----------------------------------------------------------------
----------------- [Info] : Hex file Finished --------------------
-----------------------------------------------------------------
-----------------------------------------------------------------
-------------------- [Info] : AMSS Start -----------------------
-----------------------------------------------------------------
[AMSS] : [Info] : AMSS's Receiver thread is ready !
[AMSS] : [Info] : AMSS's transfer thread is ready !
[AMSS] : [Info] : DBL Pass
[AMSS] : [Info] : FSBL Pass
[AMSS] : [Info] : OSBL Pass
[AMSS] : [Info] : amss Pass
[AMSS] : [Info] : appsboot Pass
[AMSS] : [Info] : dsp1 Pass
[Hex] : [Info] : In UsbAbort()
[Hex] : [Info] : In UsbAbort(), Discard InBuffer and OutBuffer - OK
[Hex] : [Info] : In UsbAbort(), Close and Dispose port - OK
[AMSS] : [Info] : AMSS Succ!!
-----------------------------------------------------------------
-------------------- [Info] : AMSS Finished ---------------------
-----------------------------------------------------------------
[ChangeMode] : [Info] : Change mode Start !! [AMSS => Fastboot]
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[SerialPort] : [Info] : Discard in, out Buf !
[ChangeMode] : [Info] : Port is Disposed
[UsbEvent] : [Info] : Wait UsbEvent [AMSS => Fastboot]
[DetectSN] : [Info] : Fastboot SN Found!! : 049461181140
-----------------------------------------------------------------
------------------ [Info] : Fastboot Start ---------------------
-----------------------------------------------------------------
[Fastboot] : [Info] : << in Fastboot_State.Fb_DetectAndWait >>
[Fastboot] : [Info] : Fastboot Device Found !! [Single device]
[Fastboot] : [Info] : << in Fastboot_State.Fb_SettingVar >>
[Fastboot] : [Info] : << in Fastboot_State.Fb_Erase_SetupData >>
[Fastboot] : [Info] : Erase setupdata Start !
[Fastboot] : [Info] : arg is : erase setupdata
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'setupdata'... OKAY
[Fastboot] : [Info] : Erase setupdata OK!!
[Fastboot] : [Info] : Erase cache Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'cache'... OKAY
[Fastboot] : [Info] : Erase cache OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_Boot >>
[Fastboot] : [Info] : Erase boot Start !
[Fastboot] : [Info] : arg is : erase boot
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'boot'... OKAY
[Fastboot] : [Info] : Erase boot OK!!
[Fastboot] : [Info] : arg is : flash boot "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\boot.img"
[Fastboot] : [Info] : Flash boot.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'boot' (2477 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'boot'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'boot'... OKAY
[Fastboot] : [Info] : (boot.img) RetryCounter is : 0
[Fastboot] : [Info] : Flash boot.img OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_System >>
[Fastboot] : [Info] : Erase system Start !
[Fastboot] : [Info] : arg is : erase system
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'system'... OKAY
[Fastboot] : [Info] : Erase system OK!!
[Fastboot] : [Info] : arg is : flash system "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\system.img"
[Fastboot] : [Info] : Flash system.img Start !
[Fastboot] : [Error] : No Resp..., Now, close and dispose Proc
[Fastboot] : [Info] : (system.img) RetryCounter is : 0
[Fastboot] : [Info] : Erase system Start !
[Fastboot] : [Info] : arg is : erase system
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'system'... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : arg is : flash system "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\system.img"
[Fastboot] : [Info] : Flash system.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'system' (154648 KB)... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : (system.img) RetryCounter is : 1
[Fastboot] : [Error] : Flash system.img Failed...
[Fastboot] : [Info] : << in Fastboot_State.Fb_Error_ReDo >>
[Fastboot] : [Warning] : Fastboot Re-do now... TotalErrorTimes is : 1
[Fastboot] : [Info] : << in Fastboot_State.Fb_DetectAndWait >>
[Fastboot] : [Info] : Fastboot Device Found !! [Single device]
[Fastboot] : [Info] : << in Fastboot_State.Fb_SettingVar >>
[Fastboot] : [Info] : << in Fastboot_State.Fb_Erase_SetupData >>
[Fastboot] : [Info] : Erase setupdata Start !
[Fastboot] : [Info] : arg is : erase setupdata
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'setupdata'... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : Erase cache Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'cache'... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : << in Fastboot_State.Fb_Boot >>
[Fastboot] : [Info] : Erase boot Start !
[Fastboot] : [Info] : arg is : erase boot
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'boot'... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : arg is : flash boot "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\boot.img"
[Fastboot] : [Info] : Flash boot.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'boot' (2477 KB)... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : (boot.img) RetryCounter is : 0
[Fastboot] : [Info] : Erase boot Start !
[Fastboot] : [Info] : arg is : erase boot
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'boot'... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : arg is : flash boot "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\boot.img"
[Fastboot] : [Info] : Flash boot.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'boot' (2477 KB)... FAILED (command write failed (Unknown error))
[Fastboot] : [Info] : (boot.img) RetryCounter is : 1
[Fastboot] : [Error] : Flash boot.img Failed...
[Fastboot] : [Info] : << in Fastboot_State.Fb_Error_ReDo >>
[Fastboot] : [Warning] : Fastboot Re-do now... TotalErrorTimes is : 2
[Fastboot] : [Info] : << in Fastboot_State.Fb_DetectAndWait >>
[Fastboot] : [Info] : Fastboot Device Found !! [Single device]
[Fastboot] : [Info] : << in Fastboot_State.Fb_SettingVar >>
[Fastboot] : [Info] : << in Fastboot_State.Fb_Erase_SetupData >>
[Fastboot] : [Info] : Erase setupdata Start !
[Fastboot] : [Info] : arg is : erase setupdata
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'setupdata'... OKAY
[Fastboot] : [Info] : Erase setupdata OK!!
[Fastboot] : [Info] : Erase cache Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'cache'... OKAY
[Fastboot] : [Info] : Erase cache OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_Boot >>
[Fastboot] : [Info] : Erase boot Start !
[Fastboot] : [Info] : arg is : erase boot
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'boot'... OKAY
[Fastboot] : [Info] : Erase boot OK!!
[Fastboot] : [Info] : arg is : flash boot "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\boot.img"
[Fastboot] : [Info] : Flash boot.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'boot' (2477 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'boot'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'boot'... OKAY
[Fastboot] : [Info] : (boot.img) RetryCounter is : 0
[Fastboot] : [Info] : Flash boot.img OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_System >>
[Fastboot] : [Info] : Erase system Start !
[Fastboot] : [Info] : arg is : erase system
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'system'... OKAY
[Fastboot] : [Info] : Erase system OK!!
[Fastboot] : [Info] : arg is : flash system "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\system.img"
[Fastboot] : [Info] : Flash system.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'system' (154648 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'system'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'system'... OKAY
[Fastboot] : [Info] : (system.img) RetryCounter is : 0
[Fastboot] : [Info] : Flash system.img OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_UserData >>
[Fastboot] : [Info] : Erase userdata Start !
[Fastboot] : [Info] : arg is : erase userdata
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'userdata'... OKAY
[Fastboot] : [Info] : Erase userdata OK!!
[Fastboot] : [Info] : arg is : flash userdata "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\userdata.img"
[Fastboot] : [Info] : Flash userdata.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'userdata' (2 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'userdata'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'userdata'... OKAY
[Fastboot] : [Info] : (userdata.img) RetryCounter is : 0
[Fastboot] : [Info] : Flash userdata.img OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_Recovery >>
[Fastboot] : [Info] : Erase recovery Start !
[Fastboot] : [Info] : arg is : erase recovery
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'recovery'... OKAY
[Fastboot] : [Info] : Erase recovery OK!!
[Fastboot] : [Info] : arg is : flash recovery "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\recovery.img"
[Fastboot] : [Info] : Flash recovery.img Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'recovery' (2701 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'recovery'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'recovery'... OKAY
[Fastboot] : [Info] : (recovery.img) RetryCounter is : 0
[Fastboot] : [Info] : Flash recovery.img OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_Splash1 >>
[Fastboot] : [Info] : Erase splash1 Start !
[Fastboot] : [Info] : arg is : erase splash1
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : erasing 'splash1'... OKAY
[Fastboot] : [Info] : Erase splash1 OK!!
[Fastboot] : [Info] : arg is : flash splash1 "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\initlogo.rle"
[Fastboot] : [Info] : Flash initlogo.rle Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'splash1' (8 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'splash1'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'splash1'... OKAY
[Fastboot] : [Info] : (initlogo.rle) RetryCounter is : 0
[Fastboot] : [Info] : Flash initlogo.rle OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_DevInfo >>
[Fastboot] : [Info] : << in Fastboot_State.Fb_Touch >>
[Fastboot] : [Info] : arg is : flash touch "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\touch.bin"
[Fastboot] : [Info] : Flash touch.bin Start !
[Fastboot] : [Info] : ExitCode is : 0
[Fastboot] : [Info] : result is : sending 'touch' (4 KB)... OKAY
[Fastboot] : [Info] : result[inner] is : writing 'touch'... OKAY
[Fastboot] : [Info] : fastboot.exe Succ!!writing 'touch'... OKAY
[Fastboot] : [Info] : (touch.bin) RetryCounter is : 0
[Fastboot] : [Info] : Flash touch.bin OK!!
[Fastboot] : [Info] : << in Fastboot_State.Fb_End >>
[Fastboot] : [Info] : Fastboot ALL Succ!!
-----------------------------------------------------------------
----------------- [Info] : Fastboot Finished !! -----------------
-----------------------------------------------------------------
[ChangeMode] : [Info] : Change mode Start !! [Fastboot => Recovery]
[ChangeMode] : [Info] : arg is : -c "console=ttyMSM2,115200n8 androidboot.serialno=recovery lcm_id=2 hw_ver=7" boot "C:\Documents and Settings\Rip.RIPTIDE\Desktop\Acer_LiquidE_4.002.08_EMEA-GEN1_05.01.05\decomposed_files\recovery_real.img"
[ChangeMode] : [Info] : At ChgMode_Fastboot_to_Recovery(), ExitCode is : 0
[ChangeMode] : [Info] : At ChgMode_Fastboot_to_Recovery(), result[outer] is : downloading 'boot.img'... OKAY
[ChangeMode] : [Info] : At ChgMode_Fastboot_to_Recovery(), result[inner] is : booting... OKAY
[ChangeMode] : [Info] : At ChgMode_Fastboot_to_Recovery(), Fastboot operation Success!!
[ChangeMode] : [Info] : Can enter into Recovery mode.
[UsbEvent] : [Info] : Wait UsbEvent [Fastboot => Recovery or OS]
[DetectPort] : [Info] : OS Port Found!! : COM17
[CheckPortNumber] : [Info] : OS COM Port Number [COM17], Pass
-----------------------------------------------------------------
----------------- [Info] : Nv Restore Start ---------------------
-----------------------------------------------------------------
[NFS] : [Info] : IsPhoneConnected, try times is : 0
[NFS] : [Info] : Check_IsPhoneConnected(), return Value is : True
[NFS] : [Info] : UnlockSPC(), return Value is : True
[NFS] : [Info] : EnterIntoOfflineDigital(), return Value is : True
[NFS] : [Info] : Efs PreProcidure Succ !!
[NFS_Restore] : [Info] : in NvItem_Restore()
[NFS_Restore] : [Info] : .eqf file is : C:\A3_QCN\20111015\353509031639571.eqf
[NFS_Restore] : [Info] : Nv Restoration Succ !!
[NFS] : [Info] : Reset phone is down, result is : True
[NFS] : [Info] : Restore Nv Succ !!
-----------------------------------------------------------------
----------------- [Info] : Nv Restore Finish --------------------
-----------------------------------------------------------------
[FinalResult] : [Info] : All Stages Succ !!
Process Ending Time is : 07 : 18 : 40

guys, i just found out that im already in recovery mode and i re-read the red letter sentences. It says: "Warning! This OS cannot be upgraded on 256M liquid!"
what can i do? im new in these things. please shed some light.

Stuck at bootloader say flashed failed

Im stuck at the bootloader screen and is saying flash failed. I have tried the fxz method and the forever root also. In the fxz it tries to flash but fails after and 30 sec. I'm trying to get it to scick so I can send it back to Verizon
Sent from my ADR6425LVW using xda premium

Try the path saver. Awesome script! I would find the cdt.bin and how to fastboot that and go ahead and put the .886 radio file on your SD card. that should more than fix you up.
Bionic Path Saver 1-Click Method

iosmacman said:
Im stuck at the bootloader screen and is saying flash failed. I have tried the fxz method and the forever root also. In the fxz it tries to flash but fails after and 30 sec. I'm trying to get it to scick so I can send it back to Verizon
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
What else does it say? There should be more info on the screen than just flash failure. You should have some some stuff at the bottom like "Invalid CG: boot" or something like that. This will help us figure out which file(s) you need to flash.
Also, a little background, such as what you were flashing and what you were coming from would help the effort.

I have tried the one path deal and it acts like it pushes the files but it does nothing just like in forever root I choose option 4 and it says it pushes the files and says it rebooting but the phone does nothing. It's like the phone just isn't getting it
Sent from my ADR6425LVW using xda premium

This is from rsd when i try to do the fxz
12/26/11 15:40:22 New Log Started For Software Download.
12/26/11 15:40:35 The FlashLog key is turned off.
12/26/11 15:40:37 Multi upgrade started for 1 phones
12/26/11 15:40:37 [Device ID: 0] 1/14 erase cache
12/26/11 15:40:38 [Device ID: 0] 2/14 erase userdata
12/26/11 15:40:39 [Device ID: 0] 3/14 flash lbl "lbl"
12/26/11 15:40:40 [Device ID: 0] 4/14 flash logo.bin "logo.bin"
12/26/11 15:40:41 [Device ID: 0] 5/14 flash ebr "ebr"
12/26/11 15:40:42 [Device ID: 0] 6/14 flash mbr "mbr"
12/26/11 15:40:43 [Device ID: 0] 7/14 flash devtree "device_tree.bin"
12/26/11 15:40:45 [Device ID: 0] 8/14 flash system "system.img"
12/26/11 15:42:14 [Device ID: 0] 9/14 flash boot "boot.img"
12/26/11 15:42:16 [Device ID: 0] 10/14 flash recovery "recovery.img"
12/26/11 15:42:18 [Device ID: 0] 11/14 flash cdrom "cdrom"
12/26/11 15:42:23 [Device ID: 0] 12/14 flash preinstall "preinstall.img"
12/26/11 15:43:19 [Device ID: 0] 13/14 flash webtop "grfs.img"
12/26/11 15:47:25 [Device ID: 0] 14/14 flash radio "radio.img"
12/26/11 15:47:31 [Device ID: 0] reboot
12/26/11 15:54:43 000004e4 Phone.cpp 1490 0 ERROR Waiting for phone's handle is setted successfully after restart [430000 ms] completion. failed
12/26/11 15:54:43 [Device ID: 0] Please manually power up this phone.

What does it say at the bottom of your phone screen? on the fastboot screen?
It says flash failure at the top, it should list something else.
What were you trying to do? Go into more detail of what you were doing?
It can take several minutes to flash and it to reboot. were coming from .901?
did you flash the .901.zip? I was bricked this weekend and all I was missing was the cdt.bin file from .901 once and the radio file from .886 another time.
You may be closer than you think.

I has nothing at the bottom it looks like a normal fastboot screen but at the top it has flash failure. Im just trying to get it so i can send it back to verzion i just wanted to take it back to stock i was haveing problems with the volume rocker but now i have a phone that wont do anything .

Wheni try thr release root method and pick 4 is acts like it it pushing the files and says on the computer is is and when the phone is supposed to reboot it just flashes and goes back into bootloader. I will shut it down and turn it off and hold both volume buttons down and press power and then choose to reboot it just has the droid with the ! and i can say reboot and it goes to the bootloader screen

send it back to verizon anyway, i did when i messed up with my first bionic and they never said anything when i sent it back

You can try this. Don't know if it will help or not
http://rootzwiki.com/topic/13485-unbrick-your-bionic-here/

stelv said:
You can try this. Don't know if it will help or not
http://rootzwiki.com/topic/13485-unbrick-your-bionic-here/
Click to expand...
Click to collapse
i had exactly the same situation and that link was my lifesaver
Sent from my DROID BIONIC using xda premium

Yea that link comes in handy.

Problem with flash. mbn

Hi all, I turn to the experts. I tried to Flash on my Ativ S this rom http://forum.xda-developers.com/showthread.php?t=2735495 with wp8 smd binary
In the first folder I put the .wp8 taken from GDR3 stock and the second I put the .mbn file then I deselected all partitions leaving only "csc" as explained in the post and I did start. At the alert, I pressed no.
At the end gave me this information:
[Channel 0] Channel Write CSC Start date!!
[Channel 0] Channel ITV CSC data Console.write Success!!
[Channel 0] Partition info does not Match!
[Channel 0] Binary Download complete!
I rebooted and done hard reset but nothing has changed ... the phone is returned to the original losing interop-unlock and a few tweaks done by wph-tweek previously
in your opinion what could be wrong??
I state that I edited the file .mbn with a csc ITV
Thanks to whom I will respond

Error 0x14C2A Thor2

Hello I have brick my 920 and try to unbrick it with Recovery Tools but got this message with thor 2 : Initiating emergency download
Using default emergency protocol
ALPHA EMERGENCY FLASH START
Emergency Programmer V1 version 2014.10.31.001
Hex download selected
Check if device in Dload
Connection to DLOAD mode succeeded
Get Dload parameters
Sending HEX flasher to the device
Sending GO command if HEX flasher successfully uploaded.
Emergency Programmer V1 version 2014.10.31.001
Mbn download selected
Waiting for connection to flash programmer
Connecting to flash programmer
Received valid HELLO_RSP
Safe version=true, transfer size=15360
Received valid SECURITY_RSP
Successfully connected to flash programmer
Connection to flash programmer succeeded
Uploading bootloader(s), UEFI, etc from MBN image to the eMMC. This will take up to 20 seconds
Reading GPT from binary
-- GPT STARTs--
name: SBL1
startLBA: 34
endLBA: 243
size: 0x000000000001a400 bytes
attributes: 0x0
name: SBL2
startLBA: 244
endLBA: 507
size: 0x0000000000021000 bytes
attributes: 0x0
name: SBL3
startLBA: 508
endLBA: 1193
size: 0x0000000000055c00 bytes
attributes: 0x0
name: UEFI
startLBA: 1194
endLBA: 3273
size: 0x0000000000104000 bytes
attributes: 0x0
name: RPM
startLBA: 3274
endLBA: 3559
size: 0x0000000000023c00 bytes
attributes: 0x0
name: TZ
startLBA: 3560
endLBA: 3985
size: 0x0000000000035400 bytes
attributes: 0x0
name: WinSecApp
startLBA: 3986
endLBA: 4609
size: 0x000000000004e000 bytes
attributes: 0x0
name: UEFI_BS_NV
startLBA: 4610
endLBA: 4865
size: 0x0000000000020000 bytes
attributes: 0x0
name: UEFI_NV
startLBA: 4866
endLBA: 4881
size: 0x0000000000002000 bytes
attributes: 0x0
name: UEFI_RT_NV
startLBA: 4882
endLBA: 5137
size: 0x0000000000020000 bytes
attributes: 0x0
name: UEFI_RT_NV_RPMB
startLBA: 5138
endLBA: 5153
size: 0x0000000000002000 bytes
attributes: 0x0
name: SSD
startLBA: 5154
endLBA: 5169
size: 0x0000000000002000 bytes
attributes: 0x0
name: PLAT
startLBA: 5170
endLBA: 7243
size: 0x0000000000103400 bytes
attributes: 0x0
-- GPT ENDs --
Sending OPEN_MULTI_REQ
Received valid response to OPEN_MULTI_REQ
Programming image \
Image opened successfully for reading
SAFE hex file was used and unallowed memory address was being written.
Reset the device and use the correct HEX file.
ALPHA EMERGENCY FLASH END
Emergency messaging closed successfully
Operation took about 11.00 seconds.
Unknown error code.
THOR2 1.8.2.18 exited with error code 85034 (0x14C2A)
I Have a RM-821 help me plz phone won't boot at all

Please can help me fix the error on lumia 520 Rm-915 to umbrick without jtag

Microsoft Windows [Versión 10.0.10240]
(c) 2015 Microsoft Corporation. Todos los derechos reservados.
C:\Windows\system32>CD..
C:\Windows>CD..
C:\>cd program files (x86)
C:\Program Files (x86)>cd microsoft care suite
C:\Program Files (x86)\Microsoft Care Suite>cd windows device recovery tool
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode ffureader -ffufile "C:\Lumia\RM915_3058.50000.1424.0001_RETAIL_lta_lta_282_01_452190_prd_signed.ffu" -dump_gpt -filedir C:\Lumia
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode ffureader -ffufile C:\Lumia\RM915_3058.50000.1424.0001_RETAIL_lta_lta_282_01_452190_prd_signed.ffu -dump_gpt -filedir C:\Lumia
Process started Sat Apr 22 23:25:05 2017
Logging to file C:\Users\Gaby\AppData\Local\Temp\thor2_win_20170422232505_ThreadId-1816.log
Debugging enabled for ffureader
Initiating do FFUReader operations
Version of FfuReader is 2015061501
Parsing FFU... Please wait...
readFfu() Start.
readSecurityHdrAndCheckValidity() Start.
readSecurityHdrAndCheckValidity() End.
readGpt() Start.
readGpt() End.
readRkh() Start.
readRkh() End.
readRkh() Start.
.readRkh() End.
DumpGpt() Start.
DumpGpt() End.
checkDppPartition() Start.
checkDppPartition() End.
readFfu() End.
Successfully parsed FFU file. Header size: 0x000c0000, Payload size: 0x0000000056b60000, Chunk size: 0x00020000, Header offset: 0x00000000, Payload offset: 0x00000000000c0000
HeaderStart 0x60000
GPT Header
-------------
Revision : 65536
CRC32 : 0xe976ef43
FirstUsableLBA : 34
LastUsableLBA : 15155166
AlternateLBA : 15155199
MyLBA : 1
NumberOfPartitionEntries : 128
PartitionEntryLBA : 2
PartitionEntryArrayCRC32 : 0xee412b90
GPT Partitions
-------------
DPP
startLBA : 0x0000000000001000
endLBA : 0x0000000000004fff
Size : 0x0000000000004000
Attributes: 0x8000000000000000
MODEM_FSG
startLBA : 0x0000000000005000
endLBA : 0x00000000000067ff
Size : 0x0000000000001800
Attributes: 0x8000000000000000
SSD
startLBA : 0x0000000000007000
endLBA : 0x000000000000701f
Size : 0x0000000000000020
Attributes: 0x8000000000000000
SBL1
startLBA : 0x0000000000008000
endLBA : 0x0000000000008bb7
Size : 0x0000000000000bb8
Attributes: 0x8000000000000000
SBL2
startLBA : 0x0000000000009000
endLBA : 0x0000000000009bb7
Size : 0x0000000000000bb8
Attributes: 0x8000000000000000
SBL3
startLBA : 0x000000000000a000
endLBA : 0x000000000000afff
Size : 0x0000000000001000
Attributes: 0x8000000000000000
UEFI
startLBA : 0x000000000000b000
endLBA : 0x000000000000c387
Size : 0x0000000000001388
Attributes: 0x8000000000000000
RPM
startLBA : 0x000000000000d000
endLBA : 0x000000000000d3e7
Size : 0x00000000000003e8
Attributes: 0x8000000000000000
TZ
startLBA : 0x000000000000e000
endLBA : 0x000000000000e3e7
Size : 0x00000000000003e8
Attributes: 0x8000000000000000
WINSECAPP
startLBA : 0x000000000000f000
endLBA : 0x000000000000f3ff
Size : 0x0000000000000400
Attributes: 0x8000000000000000
BACKUP_SBL1
startLBA : 0x0000000000010000
endLBA : 0x0000000000010bb7
Size : 0x0000000000000bb8
Attributes: 0x8000000000000000
BACKUP_SBL2
startLBA : 0x0000000000011000
endLBA : 0x0000000000011bb7
Size : 0x0000000000000bb8
Attributes: 0x8000000000000000
BACKUP_SBL3
startLBA : 0x0000000000012000
endLBA : 0x0000000000012fff
Size : 0x0000000000001000
Attributes: 0x8000000000000000
BACKUP_UEFI
startLBA : 0x0000000000013000
endLBA : 0x0000000000014387
Size : 0x0000000000001388
Attributes: 0x8000000000000000
BACKUP_RPM
startLBA : 0x0000000000015000
endLBA : 0x00000000000153e7
Size : 0x00000000000003e8
Attributes: 0x8000000000000000
BACKUP_TZ
startLBA : 0x0000000000016000
endLBA : 0x00000000000163e7
Size : 0x00000000000003e8
Attributes: 0x8000000000000000
BACKUP_WINSECAPP
startLBA : 0x0000000000017000
endLBA : 0x00000000000173ff
Size : 0x0000000000000400
Attributes: 0x8000000000000000
UEFI_BS_NV
startLBA : 0x0000000000018000
endLBA : 0x00000000000181ff
Size : 0x0000000000000200
Attributes: 0x8000000000000000
UEFI_NV
startLBA : 0x0000000000019000
endLBA : 0x00000000000191ff
Size : 0x0000000000000200
Attributes: 0x8000000000000000
PLAT
startLBA : 0x000000000001a000
endLBA : 0x000000000001dfff
Size : 0x0000000000004000
Attributes: 0x8000000000000000
EFIESP
startLBA : 0x0000000000020000
endLBA : 0x000000000003ffff
Size : 0x0000000000020000
Attributes: 0x8000000000000000
MODEM_FS1
startLBA : 0x0000000000040000
endLBA : 0x00000000000417ff
Size : 0x0000000000001800
Attributes: 0x8000000000000000
MODEM_FS2
startLBA : 0x0000000000042000
endLBA : 0x00000000000437ff
Size : 0x0000000000001800
Attributes: 0x8000000000000000
UEFI_RT_NV
startLBA : 0x0000000000044000
endLBA : 0x00000000000441ff
Size : 0x0000000000000200
Attributes: 0x8000000000000000
UEFI_RT_NV_RPMB
startLBA : 0x0000000000045000
endLBA : 0x00000000000450ff
Size : 0x0000000000000100
Attributes: 0x8000000000000000
MMOS
startLBA : 0x0000000000046000
endLBA : 0x000000000006df5f
Size : 0x0000000000027f60
Attributes: 0x8000000000000000
MainOS
startLBA : 0x0000000000070000
endLBA : 0x0000000000466e5f
Size : 0x00000000003f6e60
Attributes: 0x0000000000000000
Data
startLBA : 0x0000000000468000
endLBA : 0x0000000000e72fff
Size : 0x0000000000a0b000
Attributes: 0x8000000000000000
Number of partitions found 28
RKH of SBL1: 7C81AABA97E4904DB782605A6C74A59480361E5A363337B2EF5B8F925763110B
RKH of UEFI: 7C81AABA97E4904DB782605A6C74A59480361E5A363337B2EF5B8F925763110B
Platform ID: Nokia.MSM8227.P6036
Hi. index sector 15150848
Computing integrity of FFU. Please wait...
..........................
FFU integrity OK.
Exited with success
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
Process started Sat Apr 22 23:26:49 2017
Logging to file C:\Users\Gaby\AppData\Local\Temp\thor2_win_20170422232649_ThreadId-1756.log
Debugging enabled for emergency
Initiating emergency download
Using default emergency protocol
ALPHA EMERGENCY FLASH START
Emergency Programmer V1 version 2014.10.31.001
Hex download selected
Check if device in Dload
Connection to DLOAD mode succeeded
Get Dload parameters
Sending HEX flasher to the device
Sending GO command if HEX flasher successfully uploaded.
Emergency Programmer V1 version 2014.10.31.001
Mbn download selected
Waiting for connection to flash programmer
Connecting to flash programmer
Received valid HELLO_RSP
Safe version=true, transfer size=15360
Received valid SECURITY_RSP
Successfully connected to flash programmer
Connection to flash programmer succeeded
Uploading bootloader(s), UEFI, etc from MBN image to the eMMC. This will take up to 20 seconds
Reading GPT from binary
-- GPT STARTs--
name: DPP
startLBA: 4096
endLBA: 20479
size: 0x0000000000800000 bytes
attributes: 0x0
name: MODEM_FSG
startLBA: 20480
endLBA: 26623
size: 0x0000000000300000 bytes
attributes: 0x0
name: SSD
startLBA: 28672
endLBA: 28703
size: 0x0000000000004000 bytes
attributes: 0x0
name: SBL1
startLBA: 32768
endLBA: 35767
size: 0x0000000000177000 bytes
attributes: 0x0
name: SBL2
startLBA: 36864
endLBA: 39863
size: 0x0000000000177000 bytes
attributes: 0x0
name: SBL3
startLBA: 40960
endLBA: 45055
size: 0x0000000000200000 bytes
attributes: 0x0
name: UEFI
startLBA: 45056
endLBA: 50055
size: 0x0000000000271000 bytes
attributes: 0x0
name: RPM
startLBA: 53248
endLBA: 54247
size: 0x000000000007d000 bytes
attributes: 0x0
name: TZ
startLBA: 57344
endLBA: 58343
size: 0x000000000007d000 bytes
attributes: 0x0
name: WINSECAPP
startLBA: 61440
endLBA: 62463
size: 0x0000000000080000 bytes
attributes: 0x0
name: BACKUP_SBL1
startLBA: 65536
endLBA: 68535
size: 0x0000000000177000 bytes
attributes: 0x0
name: BACKUP_SBL2
startLBA: 69632
endLBA: 72631
size: 0x0000000000177000 bytes
attributes: 0x0
name: BACKUP_SBL3
startLBA: 73728
endLBA: 77823
size: 0x0000000000200000 bytes
attributes: 0x0
name: BACKUP_UEFI
startLBA: 77824
endLBA: 82823
size: 0x0000000000271000 bytes
attributes: 0x0
name: BACKUP_RPM
startLBA: 86016
endLBA: 87015
size: 0x000000000007d000 bytes
attributes: 0x0
name: BACKUP_TZ
startLBA: 90112
endLBA: 91111
size: 0x000000000007d000 bytes
attributes: 0x0
name: BACKUP_WINSECAPP
startLBA: 94208
endLBA: 95231
size: 0x0000000000080000 bytes
attributes: 0x0
name: UEFI_BS_NV
startLBA: 98304
endLBA: 98815
size: 0x0000000000040000 bytes
attributes: 0x0
name: UEFI_NV
startLBA: 102400
endLBA: 102911
size: 0x0000000000040000 bytes
attributes: 0x0
name: PLAT
startLBA: 106496
endLBA: 122879
size: 0x0000000000800000 bytes
attributes: 0x0
name: EFIESP
startLBA: 131072
endLBA: 262143
size: 0x0000000004000000 bytes
attributes: 0x0
name: MODEM_FS1
startLBA: 262144
endLBA: 268287
size: 0x0000000000300000 bytes
attributes: 0x0
name: MODEM_FS2
startLBA: 270336
endLBA: 276479
size: 0x0000000000300000 bytes
attributes: 0x0
name: UEFI_RT_NV
startLBA: 278528
endLBA: 279039
size: 0x0000000000040000 bytes
attributes: 0x0
name: UEFI_RT_NV_RPMB
startLBA: 282624
endLBA: 282879
size: 0x0000000000020000 bytes
attributes: 0x0
-- GPT ENDs --
Sending OPEN_MULTI_REQ
Received valid response to OPEN_MULTI_REQ
Checking eMMC read / write test results...
Failed to read number of eMMC sectors. eMMC is not working!!
ALPHA EMERGENCY FLASH END
Emergency messaging closed successfully
Operation took about 12.00 seconds.
Unknown error code.
THOR2 1.8.2.18 exited with error code 85035 (0x14C2B)
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>