Database Develop

Help, Bricked and no solution is working

Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated

vstarrydr05 said:
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
Click to expand...
Click to collapse
Is download mode still available? If yes your not screwed but your drivers might be.
What steps do you use to get into download mode.... 3 buttons or usb/vol+- combo ?

Yes download mode is available. I used the holding the volume up and down and plugging in USB. It goes to download mode with no issues whatsoever.

Well then this is a non-issue issue... Possibly a bad flash... Go in download mode again and reflash.
Your a bit crying wolf with no reason here. As long as download mode works and Odin detects the phone you have no issue
Use the Odin-one click if you have to ...but really calling it a brick when you have download mode gee-wiz.

Thats the issue. It is not detecting in ODIN. If it was detected I would have reflashed with no problem. I get the message that the USB device has malfunctioned and is not recognized

Try re-downloading the USB drivers - use the ones found in my signature.
If you can get into recovery - you can then get back into CWM and attempt to re-flash again - but you'd still need to 1-click back to stock using ODIN.

Have you tried to plug the usb cable in the Mb directly or changing its port ?

I actually downloaded your drivers last night and installed them. Still not recognized. I can get to CWR and have the zip files for AXURA and Cognition on the SD card. Get errors on various lines when trying to install either. I have tried 3 different cables and 4 different computers with no luck on recognition

Well crap... I did have the USB issue on my work's XP Machine - but when I went home to my Windows 7 box - it ended up finding the phone fine and I was able to flash back to stock.
Any chance you can find a Windows 7 box?

Dont know anyone with one unfortunately. I need to install Win 7 through bootcamp on my mac. I tried to even get it to mount as storage through CWR on it with no success

Well.. I can say with 99% certainty you should be able to restore the phone.. also if you look at my sig - I just added a link to the OTA_JH7.zip that is CWM flashable if you could somehow get the zip onto your phone that is lol.
Hm.. and I dunno how the virtual box of Win7 will run - but it's worth a shot. Windows 7 seems to be superior when it comes to figuring out devices vs. XP. I was shocked when it found my then toasted phone (similar issue your currently experiencing).

Haha, I have your zip to as a matter of fact. I picked it up but I dont know how to get it put on the phone if it wont recognize usb. If CW usb mounting would have working I was gonna put it on the internal sd and let it flash it

and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer

vstarrydr05 said:
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
Click to expand...
Click to collapse
Duh.. been awhile since I've used MAC - you are quite correct

ok, on the flashing back either rom I get a error on line 10 trying to reflash AXURA and a error on line 12 with Cognition

Hmm. have you tried to do the factory reset from within CWM? I mean at this point.. can't lose anything by trying it.

Yeah, just did the wipe/factory reset through CWR. Still sticking on the same screen

Try this.
-Unplug the phone
-Uninstall all the current Samsung drivers you have, reboot
-Install this one, reboot
-Put the phone in download mode
-Plug the phone
Does windows install the drivers? If not continu
-Open Windows Device Manager and do a plug&play search
-If you have a ? device select it
-Right click/Update Drivers
-Select automatic...... if windows finds nothing return and select Manual.
-Choose the "Samsung ADB composite device" driver and install
Is the install successful ?
-Now unplug the usb cable
-Open Odin
-Plug the usb cable
Does Odin now see the phone ?

I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App

ronf1011 said:
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why would you brick a working phone based on a driver issue ?!
That's like blowing your car engine cause you can't communicate with onboard electronics........ unreal

[Q] Semi-bricked, USB not recognized, doesn't even charge

Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens

Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.

formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.

somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on

Got it all running, installed Darky's rom 9.3. Thanks anyway.

theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.

I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock

Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution

*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S

Same prob here! Any news?

Any solution? I have the same problem.

same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode

bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.

USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter

[Q] USB doesn't recognize download mode. Stuck after installing speedmod kernel

I had rooted my phone previously running 2.1 and yesterday decided to try cm7. (I've flashed many G1 roms but none for Captivate)
Sorry this is quite long but wanted to give as much detail as possible
I was reading and watching the guides. Installed rom manager and flashed ClockworkMod Recovery 2.5.1.0
Rebooted the phone and tried to see if I can get into download mode by holding vol up + down and plugging the USB cable.
Once it booted tried to copy some other roms (zips) to the phone but the USB wasn't working on windows for some reason so rebooted in Linux. Phone mounted at first (for about a minute) but something happen and I lost the mount. I unplugged/plugged the usb cable but wasn't able see the phone as a drive even with fdisk.
So I ftped to the phone:
3buttonFix.zip
captivate-efsbackup.zip
cm7-captivate-initial-20110304.zip
speedmod-kernel-i897-k13c-500hz-CWM.zip
Installed 3buttonFix.zip (should let me enter download mode) from recovery, rebooted but still couldn't get in download mode.
Installed speedmod-kernel-i897-k13c-500hz-CWM.zip from recovery. Not sure if I had to do anything special like reformat the filesystem with the new kernel?
After reboot the phone gets stuck on Galaxy S sgh-i897 screen. Got back in recovery and installed captivate-efsbackup.zip and cm7-captivate-initial-20110304.zip
The cm7-captivate-initial-20110304.zip fails when trying to write the modem
'assert failed: write_raw_image("/tmp/modem.bin", "radio")'
I plugged the phone into another computer at that point and was able to get into "Download mode" for the first time. Odin didn't recognize the phone though. Download mode is very flaky. It starts sometimes, sometimes it doesn't (battery charger starts) even on the same port with the same cable. I have tried installing captivate drivers and/or kies on 7 different systems (5 laptops 2 desktops) but Odin never recognizes the phone and windows trows out a "USB Device Not Recognized" msg
I think my usb is not working properly but the guides how to recover assume working Download mode with Odin. Any suggestions on what to do for that? Or I guess I can download a different rom and/or kernel on my sdcard than mount the sdcard through recovery and install that way?
Any advise is appreciated as I'm not very familiar with the kernel and rom differences for captivate

Well you messed up on the instructions but that is a separate point.
I went through your post quickly so if I am saying something you grave tried I apologize
What drivers are you installing
Have you tried multiple ports
Are you using oem cord
Have you restarted your computer
Have you ever used odin before
CM7

I have used the following drivers:
SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip
SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe (just the usb modem driver)
2 different versions of samsung kies which include usb drivers (don't have the software versions handy but I can get them if that will help)
Ports:
Multiple computer and multiple ports. Will try few more options
Cables:
Used 3 different usb cables. 1 of them is from a BB phone. 1 of the other 2 is the one which came with the captivate (not 100% sure though)
Reboots:
4 of the 7 computers I tried on were rebooted. One version of kies requires this anyhow.
Odin:
Haven't used Odin at all. I think when the phone gets connected and odin recognizes it one of the top left blocks changes color right ? I tried to flash even when it didn't (just to make sure I wasn't missing something) and saw 0 successful / 0 failed

Do you have android sdk installed on any of the computers?
CM7

So many red flags that something wasn't right with your phone and you still tried to flash it? I just don't get it.

@Miami_Son: Yeah but i'm too thick headed - living dangerously but yeah you're right.
@mcord11758: I have android sdk installed on my linux build at home. I'll put it on a windows system at work and see if it can see the phone. Anything in particular I should do / look out for ?

At least you've got a good attitude.

I think if you have kies installed it conflicts with the samsung drivers odin uses. Try uninstalling them and flash odin.
Sent from my i897
Edit damn swype

1tontomato said:
I think if you have kies installed it conflicts with the samsung drivers odin uses. Try uninstalling them and flash odin.
Sent from my i897
Edit damn swype
Click to expand...
Click to collapse
Try this first
Sdk to install updated drivers if this fails
CM7

I've done almost the exact same thing...having the same issues. Phone would not connect to computer. Other captivates connect fine. The phone is now stuck on a boot screen and I can put it into download mode but Odin or the computer will not detect it at all. I don't think I can get into recovery mode, nor can I get into a rom...pretty much just download mode or a boot screen.

@1tontomato: Tried uninstall kies, reboot, install samsung usb drivers, reboot still don't see the phone connected in odin
@mcord11758 The sdk is trying to download the repository directly and I'm behidn a proxy server at work. I'll update tonight, it will be most likely very late by the time I get home.
@kwhee07 Yeah sux to see a download mode but not being able to download. I can get at least into recovery so I guess I can at least flash something that way. The ports really make difference, I've seen many would just charge the phone and some will get your phone into download mode at least. Try a different pc and cable if you can.

I have the sdk...I've tried about everything else I can find. Is there a possible method of fixing this via the SDK? I feel like if I could make the computer force [odins] data out the usb port, it would work, the phone would be in download mode awaiting data....but I cant get odin to see it

There is a package you can install in sdk for usb drivers. Dl it
Open odin
Get into dl mode
Unknown device pops up
Click on it
choose custom drivers
Navigate to c drive/program files/android/extras/google add ons/usb click ok (the path may be slightly different) the computer should try to install the correct drivers
If it works odin should now recognize your device. If not I got nothing
CM7

Got the USB drivers from the SDK and tried to force them when it sees an unknown device, but I get "The specified location does not contain information about your hardware"
I tried to force it to use the samsung drivers also but without success.
Is it possible to just download a rom or kernel and update my current state? So that the phone at least boots. I can install stuff through recovery. Download mode is nice and everything but I'm giving up on it, don't have any more ideas to try
I have been trying to see data on my sdcard from ClockworkMod Recovery 2.5.1.0 I go to
Mounts and Storage -> mount /mnt/sdcard
Install *.zip from sdcard -> choose zip from sdcard
I don't see /mnt at all I try and go under sd/ but it says No files found.

bestivo said:
I have been trying to see data on my sdcard from ClockworkMod Recovery 2.5.1.0 I go to
Mounts and Storage -> mount /mnt/sdcard
Install *.zip from sdcard -> choose zip from sdcard
I don't see /mnt at all I try and go under sd/ but it says No files found.
Click to expand...
Click to collapse
Under mounts and storage do you see the option for mount usb this might be able to force your computer to see it as a removable drive. If out does you should be able to copy another rom to the sd and flash. This may or may not work for you because you might still need to repartition which you only do with odin. Take this advise with extreme caution I really think you need odin If you do decide to flash another rom, use cognition because Dg's includes the fixed boot.bin. Probably because so many people use the one click and kill their button combos and don't know it. Other devs don't include it in their roms, because it's dangerous to over write something that doesn't need to be overwritten. Good luck
Sent from my Fusion 1.8 SAMSUNG-SGH-I897

I tried already the usb mount option from recovery at home and now at work also on few different systems/ports including a linux machine. I don't see the drive connected.
My only option left is to get somehow the sdcard mounted and install a rom from there. Or maybe just repartitioning/changing the filesystem might fix the getting stuck problem.

I ended up bringing my phone back to att, and they said that the 1010 batch was under product advisory..they exchanged my phone with almost no questions asked.
Now i have a 1008 and am running CM7

Finishing up the story in case it might help somebody in the feature.
I called AT&T to get my phone replaced and it turns out it has liquid dmg. There's a little white sticky that turns red when there's liquid dmg. Mine was pink but wasn't wait so no warranty for me. Turns out most of the time people get liquid dmg is if they leave the phone in the bathroom or close to the kitchen's sink, which is kinda bs but whatever.
I've tried few more times. Tried even on a Mac and on a Linux system (using http://forum.xda-developers.com/showthread.php?t=755265 )
I was about to give up and go seek one of the 'professional rooters' but last thing I tried was to use an 'air duster' and clean the usb port on my phone. After that Odin was able to see my phone. The connection was dropping on/off but it successfully finished a flash.
Not sure if I should even try to put another rom or the official froyo update but at least for now I'm up and running
Thanks all

[Q] USB device malfunctioned

I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
banttu said:
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Click to expand...
Click to collapse

banttu said:
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
Click to expand...
Click to collapse
try uninstalling the drivers for your phone on the pc.
factory reset your phone.
Does it recognise in odin when in download mode?

The same issue. I have Ultibread 1.4 and wanted to flash the JVK but windows keep disabling it. Can't find the device either in normal state or in download state. Odin also didn't recognize it
I'm on win7 x86
Did a factory reset - still the same

I tried different cables and PC's - no luck Anyone !! Any idea?

nightrave said:
I tried different cables and PC's - no luck Anyone !! Any idea?
Click to expand...
Click to collapse
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin

Didn't help in my case. I did the backup and wipe/factory reset the phone. Enabled the debugging mode, removed kies and all the drivers, rebooted the phone and the pc, connected the phone to pc and had the same message Any idea where I could got it wrong?
P.S. ANd the phone is now extreeeemly laggy and unresponsive

Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet

nightrave said:
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
Click to expand...
Click to collapse
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?

banttu said:
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
Click to expand...
Click to collapse
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache

nightrave said:
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
Click to expand...
Click to collapse
And I guess that there's no nandroid backup either?
Though they didn't work in my case.

banttu said:
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
Click to expand...
Click to collapse
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card

nightrave said:
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
Click to expand...
Click to collapse
Well, there seems to be only a one solution.
You have to uninstall the phones drivers, and install them again.
Then plug your to your computer in download mode and it'll install rest of the drivers.
Then Odin should be able to recognize your phone and your good to flash stock.
But you really, really have to uninstall the drivers

Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error

nightrave said:
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
Click to expand...
Click to collapse
Hmm.. I did change the computer.. Maybe you should put the drivers on a flash drive and go to your friends computer to flash.
The thing is that he does not have the drivers installed before either.
Don't know why it worked for me but... it worked.

I am going to try the last thing - I have a System backup from the time I definitely didn't have them on the PC and see if this helps....

Nope.... Didn't help.... I am completely desperate. Maybe anyone would have another magical solution?

Guys! ANy idea? Plzzzzz. I'd do anything to get it back to life

Me too i get "unknown device" when attached with usb in download mode...ive been trying to get it back workin for a week now...tried everything...which means i can't flash it to gingerbread
Anyone got any ideas ?

I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?

nightrave said:
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
Click to expand...
Click to collapse
Hi!
I have a similar problem.
For few days, I cannot connect my SGS to my Notebook.
I have windows 7 x64 installed, and it has never had any problems with connections.
Now, I don't know why, but I cannot connect it.
I tried to connect it to another computer, which has windows 7 x86.
And it was succesfull!
Now, it seems, that I don't have a hardware issue, but I cannot imagne, how I could solve this problem.
I already tried these:
- remove drivers/programs
- tried other USB slots
- downloaded newer USB driver for x64
- removed USB drivers (all of them)
- unplugged my notebook for over 5 minutes (also removed the battery)
Every time I plug my SGS to my PC only this message appears:
"unknown device" - or something similar, because I have a hungarian windows 7.
Sorry about my english.
Has anyone any idea?
Thx for advance

Alcatel Idol 4 6055K problem with firmware

Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english

Hm.. said:
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Click to expand...
Click to collapse
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.

Perdigon55 said:
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Click to expand...
Click to collapse
Hello, thanks for the answer and the download.
I've tried the same way. I still downloaded your file and tried as you described.
Unfortunately I got the same error NPRG Error 5002 again.
Unfortunately I have no idea where the problem could be.

I found out that it could be a memory error.
As if a flash process had failed and there is no longer a correct series of partitions.
So I would need a complete original rom and would have to flash it via fastboot.
I could also try it via twrp, but I don't get this flashed.
And I don't have a complete original rom either.

Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.

Hm.. said:
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Click to expand...
Click to collapse
Hello, it may be that you are making the same mistake that I made when installing recoveri. When selecting the recovery, note that the twr is the one that weighs about 14 mb and the original one about 24 mb. I think that when you make a copy with the recovery program and then install the twr you select it wrong. In the program, do not make the copy of the recovery, skip that step and go directly to install and select the 14 mb file. You will see that this is the problem. Cheers