I have htc one m7 international, Rooted S-off , sense 6. Stock Rom
I don't know what happened!!! My touchscreen isn't working in the centre of the screen! Is it hardware problem !? Or any other solution!?
Well it depends. Did you do anything or did it just stop working?
Sent from my HTC One using XDA Premium 4 mobile app
nateboi81 said:
Well it depends. Did you do anything or did it just stop working?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well honesty i dont remember! I had modaco toolkit and many more Modules! N also that sound module...but i dont think sound plugin would affect touch!! N yeah recently my cell was booting up n like after 2 mins it was rebooting...so i just restored my backup which was taken after rooting :/
akshayy29 said:
Well honesty i dont remember! I had modaco toolkit and many more Modules! N also that sound module...but i dont think sound plugin would affect touch!! N yeah recently my cell was booting up n like after 2 mins it was rebooting...so i just restored my backup which was taken after rooting :/
Click to expand...
Click to collapse
you probably restored a 1.xx ROM/nandroid and your firmware is 2.xx+; in the 2.xx+ firmware the touchscreen drivers were updated and don't work with a 1.xx ROM
use a 2.xx+ ROM then the touchscreen will work again.
EDIT: sorry, just reread the OP, only in the centre of the screen?
yeahh only in the centre of the screen...means horizontally!!! So should I reflash the stock Rom !?
akshayy29 said:
yeahh only in the centre of the screen...means horizontally!!! So should I reflash the stock Rom !?
Click to expand...
Click to collapse
yes, why not try? (different ROMs, etc.)?
also try (in dialer) *#*#3424#*#* and run the Line Drawing Test
PS: please do not send me any PMs with a timer
nkk71 said:
yes, why not try? (different ROMs, etc.)?
also try (in dialer) *#*#3424#*#* and run the Line Drawing Test
PS: please do not send me any PMs with a timer
Click to expand...
Click to collapse
I did line drawing test ... See the screenshot below!! There are gap between some lines!! That happens!! (´･_･`) so is it hardware problem or should I try Roms!?
akshayy29 said:
I did line drawing test ... See the screenshot below!! There are gap between some lines!! That happens!! (´･_･`) so is it hardware problem or should I try Roms!?
Click to expand...
Click to collapse
Could very well be a hardware problem. I don't see any reason why wouldn't want to try an ruu (or at least a different ROM), and see if that works better... it's all up to you.
nkk71 said:
Could very well be a hardware problem. I don't see any reason why wouldn't want to try an ruu (or at least a different ROM), and see if that works better... it's all up to you.
Click to expand...
Click to collapse
If by chance its hardware problrm...My device is still in warranty but as I have unlocked boot loader n rooted n status is tempered my warranty must be destroyed! But I'm still S-on and on stock rom. Is there any chance I can get my phone back to unroot relocked boot loader n tempered status off!? Do service centres check the tampered [email protected]??? I browsed a little n found that only unroot...by unroot I mean reflashing the Rom might be enough! N yeahh I'll try Ruu + different rom! ? Thanks!
akshayy29 said:
If by chance its hardware problrm...My device is still in warranty but as I have unlocked boot loader n rooted n status is tempered my warranty must be destroyed! But I'm still S-on and on stock rom. Is there any chance I can get my phone back to unroot relocked boot loader n tempered status off!?
Click to expand...
Click to collapse
Yes follow nkk71's guide linked in his/my signature
Do service centres check the tampered [email protected]???
Click to expand...
Click to collapse
yes they do check the flag, phone must be 100% stock including bootloader locked (not relocked) and no tampered flag.
alray said:
Yes follow nkk71's guide linked in his/my signature
yes they do check the flag, phone must be 100% stock including bootloader locked (not relocked) and no tampered flag.
Click to expand...
Click to collapse
yeah i was trying to S-off since im on HBoot 1.57 I tried firewater as many suggested. but i got these error
D:\HTC>adb devices
List of devices attached
MB352W909733 device
D:\HTC>adb reboot
D:\HTC>ad wait-for-device push firewater /data/local/tmp
'ad' is not recognized as an internal or external command,
operable program or batch file.
D:\HTC>adb wait-for-device push firewater /data/local/tmp
4198 KB/s (4522136 bytes in 1.051s)
D:\HTC>adb shell
[email protected]:/ $ su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 8.0.6.3 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs. posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
yes
yes
Type 'Yes' or 'No'
(Yes/No)
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, h
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, h
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, h
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
********** whelp, this sucks, firewater can not work on your device **********
********** no amount of reflashing, retrying, or ruuing will fix... **********
********** DO NOT COME TO IRC ASKING FOR UPDATES OR ETAS!!!!!! **********
********** if we are able to fix this issue, it will be announced **********
********** bye bye.....sorry it didn't work out. **********
Click to expand...
Click to collapse
My Htc one details :
bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.707.104
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****************
(bootloader) imei: ************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4223mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Please help :'(
Related
Hi Guys,
I am in a bit of a pickle.
I decided to Install Cyanogenmod today to see what the fuss was all about - I managed to do this successfully but then after using it for a while actually didn't like it and preferred using Sense 5.
I tried to flash stock to my HTC One (UK M7ul) via the RUU method but this failed twice.
The phone is currently will only boot into Bootloader regardless of what I try so will not even boot into Cyanogenmod at all, when ever i click recovery as CWM was installed the phone will flash for a second saying starting recover and then go straight back into bootloader.
I am currently on Bootloader 1.55 with S-On - Phone is locked and will not allow me to unlock it.
I really need some help to get my phone fully functional again on HTC Sense Stock Firemware.
CID: HTC__001
MID: PN0710000
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Davidpearl said:
Hi Guys,
I am in a bit of a pickle.
I decided to Install Cyanogenmod today to see what the fuss was all about - I managed to do this successfully but then after using it for a while actually didn't like it and preferred using Sense 5.
I tried to flash stock to my HTC One (UK M7ul) via the RUU method but this failed twice.
The phone is currently will only boot into Bootloader regardless of what I try so will not even boot into Cyanogenmod at all, when ever i click recovery as CWM was installed the phone will flash for a second saying starting recover and then go straight back into bootloader.
I am currently on Bootloader 1.55 with S-On - Phone is locked and will not allow me to unlock it.
I really need some help to get my phone fully functional again on HTC Sense Stock Firemware.
CID: HTC__001
MID: PN0710000
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE
(bootloader) imei: REMOVE
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
good thing you posted a ''fastboot getvar all'' but never post IMEI and SN, remove them from your post.
To restore the phone back to stock with a ruu, you need to be s-off to downgrade hboot to 1.44. So you will have to unlock bootloader from htcdev, install twrp custom recovery, flash arhd 31.6, s-off with rumrunner, downgrade hboot and then run the ruu.
all details can be found in this guide.
flash twrp recovery, and then type fastboot erase cache
Then try booting into recovery, and adb push this rom.. http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Thanks for the help guys - I have issues with my computer not recognising my phone.
I have managed to unlock it again and am trying to get either one of the two methods you guys suggested to work.
The adb push command or side load is not working in TWRP.
Dunno how I am going to get this file on there?
Davidpearl said:
The adb push command or side load is not working in TWRP.
Dunno how I am going to get this file on there?
Click to expand...
Click to collapse
usb otg cable
copy the zip @SaHiLzZ linked to a usb drive then connect to phone via usb otg cable and mount it in twrp
alray said:
usb otg cable
Click to expand...
Click to collapse
Guess I am going to have to make one.
Female USB A to Micro USB right?
Davidpearl said:
Guess I am going to have to make one.
Female USB A to Micro USB right?
Click to expand...
Click to collapse
it cost like 2$ on ebay
and yed you can make one if you don't care cutting 2 usb cables
dont forget pin 4 of micro connector must be connected to gnd
GOT IT WORKING!!!!! I reinstalled CWM and that worked via side loading the image.
up and running all is right with the world!
IS there anything I need to do now as matter of good practie?
The bootloader is currently still inlocked - S-On is still activated and I still have the *tampered* logo.
Do I need to A) Lock the boot loader?
Should i turn S-Off?
How do I get rid of the tampered logo so its fully stock and I can get it repaired from HTC again?
Davidpearl said:
IS there anything I need to do now as matter of good practie?
The bootloader is currently still inlocked - S-On is still activated and I still have the *tampered* logo.
Do I need to A) Lock the boot loader?
Should i turn S-Off?
How do I get rid of the tampered logo so its fully stock and I can get it repaired from HTC again?
Click to expand...
Click to collapse
detail on how to go back 100% stock without tempered flag can be found in the guide in linked to you i my previous post
alray said:
detail on how to go back 100% stock without tempered flag can be found in the guide in linked to you i my previous post
Click to expand...
Click to collapse
I get this error when trying to S-Off my device? what do i need to do?
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (36/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (37/120)
must ferment longer...
ERROR: looks like device is not rooted AND lacks an unsecure kernel. su or FU!!
!
Press ENTER to exit
Have you tried rooting it? Watch the screen, it will ask for su permissions
Seems that root is missing. Install SuperSu
Uxepro said:
Seems that root is missing. Install SuperSu
Click to expand...
Click to collapse
I rooted it today and got all the way to the last step and its saying this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (36/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1)...........
.........................................
..........
pouring (2)...........
..................................
.
pouring (3)...........
....................................
pouring (4)...........
...................................
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
What do I do?
Davidpearl said:
I rooted it today and got all the way to the last step and its saying this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (36/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1)...........
.........................................
..........
pouring (2)...........
..................................
.
pouring (3)...........
....................................
pouring (4)...........
...................................
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
What do I do?
Click to expand...
Click to collapse
Tried again and got this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (35/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1).........
...............................
pouring (2).........
..................................
pouring (3).........
.................................
pouring (4).........
.....................................
pouring (5).........
...................................
pouring (6).........
...................................
pouring (7).........
....................................
pouring (8).........
.........................................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
SaHiLzZ said:
Have you tried rooting it? Watch the screen, it will ask for su permissions
Click to expand...
Click to collapse
Uxepro said:
Seems that root is missing. Install SuperSu
Click to expand...
Click to collapse
Hey guys, any idea?
Do I need to install a Custom Rom to unlock S-Off and then re-flash Stock firmware?
Davidpearl said:
Hey guys, any idea?
Do I need to install a Custom Rom to unlock S-Off and then re-flash Stock firmware?
Click to expand...
Click to collapse
did you flash an unsecured kernel?
"(bootloader) version-main: 3.62.401.1" or just install ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023 which has all the prerequisites.
if you're having problems with Windows, try Ubuntu Live USB: http://forum.xda-developers.com/showthread.php?t=2606577
nkk71 said:
did you flash an unsecured kernel?
"(bootloader) version-main: 3.62.401.1" or just install ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023 which has all the prerequisites.
if you're having problems with Windows, try Ubuntu Live USB: http://forum.xda-developers.com/showthread.php?t=2606577
Click to expand...
Click to collapse
I am using the Guru_Reset_3.62.401.1 from the link - I assume that this Stock rom is secured?
I could flash ARHD 51.0 and I may even stay on that if the perform is much superior..... at least If I S-Off on that I can fully stock if there are any issues.
ARHD 51 is basically Kitkat with Sense on it right?
Thanks for all your help it is greatly appreciated.
Davidpearl said:
I am using the Guru_Reset_3.62.401.1 from the link - I assume that this Stock rom is secured?
I could flash ARHD 51.0 and I may even stay on that if the perform is much superior..... at least If I S-Off on that I can fully stock if there are any issues.
ARHD 51 is basically Kitkat with Sense on it right?
Thanks for all your help it is greatly appreciated.
Click to expand...
Click to collapse
Use ARHD 31.6 (because it's inline with your firmware 3.62.401.1), then use rumrunner to get S-Off
I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Tried to Downgrade hboot to original 1.44 but failed .
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot flash zip orig_hboot
_1.44.0000_M7_RUUmode.zip
target reported max download size of 1514139648 bytes
sending 'zip' (486 KB)...
OKAY [ 0.234s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.281s
Click to expand...
Click to collapse
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?
Divyashwar said:
I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
Tried to Downgrade hboot to original 1.44 but failed .
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?
Click to expand...
Click to collapse
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)
Mutasek24 said:
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)
Click to expand...
Click to collapse
Yeah ! I just did this bro ! .
fastboot flash unlocktoken Unlock_code.bin
Now, Bootloader is unlocked and have recovery TWRP.
Going for S-OFF now.
soon update more...
Thank you
Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Thank you
Divyashwar said:
Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Click to expand...
Click to collapse
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/
nkk71 said:
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/
Click to expand...
Click to collapse
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal
Divyashwar said:
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal
Click to expand...
Click to collapse
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?
nkk71 said:
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?
Click to expand...
Click to collapse
Thank you !
Firewater works
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb push firewater /data/loca
l/tmp
3795 KB/s (4347896 bytes in 1.118s)
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb shell
[email protected]:/ # su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 0.4.0 ==============================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
that firewater was good and hot, throwing out the empties
=========================================================================
==== device is now s-off. Don't forget to send us all your money =====
=========================================================================
=============== paypal: [email protected] =======================
=========================================================================
[email protected]:/ # Yes
sh: Yes: not found
127|[email protected]:/ #
Click to expand...
Click to collapse
Divyashwar said:
Thank you !
Firewater works
Click to expand...
Click to collapse
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!
nkk71 said:
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!
Click to expand...
Click to collapse
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?
Divyashwar said:
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?
Click to expand...
Click to collapse
If you're going for a downgrade RUU.EXE then you need to downgrade hboot separately first, if you are on hboot 1.55+
May I recommend you take a look at my guide on how to return to stock: http://forum.xda-developers.com/showthread.php?t=2541082
(in particular the FAQs, especially if you are on Win8.1)
If you're keeping the phone, you can skip the LOCKED part and the S-On part (those are for people returning for warranty, or selling the phone).
Let me know if you have questions
Cheers
Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA355W908122
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.
RobbieKeane said:
Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.
Click to expand...
Click to collapse
instructions
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
clsA said:
instructions
Click to expand...
Click to collapse
Thank you very much I will try and update sir.
My hope come again
[email protected] InsertCoin ADDICT [email protected]~
We can do anything (If we want :3)
I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?
RobbieKeane said:
I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?
Click to expand...
Click to collapse
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76
clsA said:
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76
Click to expand...
Click to collapse
Thank you for your suggest but now I cannot install any rom or zip file in TWRP it's say "Failed to install".
I don't know how to fixed it and how to diagnose or debug what happen T__T.
Hello, i make new topic with more information about my problem with S OFF.
I got HTC One (int) With HBOOT 1.55 and TMOB101 CID. I tried every S OFF methods with many roms (stock and custom) and i always fail.
I tried do S OFF by firewater:
==================== firewater S-OFF 0.5.3.16 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
whelp, that bottle is empty, opening bottle 2
chugging..........
whelp, that bottle is empty, opening bottle 3
chugging..........
whelp, that bottle is empty, opening bottle 4
chugging..........
whelp, that bottle is empty, opening bottle 5
chugging..........
whelp, that bottle is empty, opening bottle 6
chugging..........
C:\Users\pawel\Desktop\ADB Drivers_Updated>
Click to expand...
Click to collapse
And Fail..
Rumrunner log:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (49/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (50/120)
must ferment longer...
chilling..................
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................................
pouring (2)..................................................
pouring (3)....................................................
pouring (4)...................................................
Click to expand...
Click to collapse
Up to 10 times and error.
Im on INSERTCOIN` rom right now.
I dont now what i have to do, to got S OFF`ed. XDA HELP ME!
LisekDH said:
Hello, i make new topic with more information about my problem with S OFF.
I got HTC One (int) With HBOOT 1.55 and TMOB101 CID. I tried every S OFF methods with many roms (stock and custom) and i always fail.
I tried do S OFF by firewater:
And Fail..
Rumrunner log:
Up to 10 times and error.
Im on INSERTCOIN` rom right now.
I dont now what i have to do, to got S OFF`ed. XDA HELP ME!
Click to expand...
Click to collapse
Try ARHD 31.6
It worked twice for me...................
Just intall ARHD 31.6? No relock or smth?
lisekdh said:
just intall arhd 31.6? No relock or smth?
Click to expand...
Click to collapse
relock???? No, absolutely no
I flashed arhd 31.6 and it still S ON , firewater didnt work, rumrunner didnt work 2. I think i cant S OFF my HO.
I have TAMPERED flag, it can be problem for S OFF?
LisekDH said:
I have TAMPERED flag, it can be problem for S OFF?
Click to expand...
Click to collapse
No tampered makes no difference.. You want ARHD 31.6 not insertcoin.
Try rumrunner again. It took me 3-4 times before it worked, and please keep to one thread, making multiple threads for the same problem will get you nowhere.
Sent from my HTC One using XDA Premium 4 mobile app
Im now on stock 3.36.111.3 and i tryin
LisekDH said:
Im now on stock 3.36.111.3 and i tryin
Click to expand...
Click to collapse
i'm in the same situation, if you have good notice post it....
i tried firewater , he stops at 12 Bottles.. , im tried rumrunner pouring 10... . It`s f*** unable to S OFF my device
Make sure debugging is enabled in developer settings. And fastboot is off in power settings.
Your adb isn't working that seems to be the problem.
Do the above instructions, then type in cmd ADB DEVICES with Rom booted.
See if you get device id listed then.
Everything is good, ADB Enabled, fastboot is off, computer see my htc. I do everything what is in guide, but still nothing.
mago988 said:
i'm in the same situation, if you have good notice post it....
Click to expand...
Click to collapse
Sent from my HTC One using Xparent Skyblue Tapatalk 2
You need an insecure kernel. Stock kernel will not work. That's why you need a custom rom like ARHD
bored_stupid said:
Sent from my HTC One using Xparent Skyblue Tapatalk 2
You need an insecure kernel. Stock kernel will not work. That's why you need a custom rom like ARHD
Click to expand...
Click to collapse
Thank you so much i was trying all night to get s-off loll
it`s work 4 u? I tring ARHD 2 and still nothing. ARHD 31.6.
HTC One Telus 1.55 S-on
I'm having the same issue, rumrunner fails and after a couple times the PC drops the USB connection forcing a reboot. Unlocked but with TAMPERED flag set. Any help would be great, I hate to send it in to what I’m starting to thing may need j-tagged.
Thanks in advance!
venomate said:
I'm having the same issue, rumrunner fails and after a couple times the PC drops the USB connection forcing a reboot. Unlocked but with TAMPERED flag set. Any help would be great, I hate to send it in to what I’m starting to thing may need j-tagged.
Thanks in advance!
Click to expand...
Click to collapse
Firewater seems to be the most successful at achieving S-Off at the moment .
http://firewater-soff.com/instructions/
Sent from my HTC One using XDA Premium 4 mobile app
I try 3 times with firewater on ARHD 31.6 to day and fail..
LisekDH said:
I try 3 times with firewater on ARHD 31.6 to day and fail..
Click to expand...
Click to collapse
Post a fastboot getvar all please
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT************9
(bootloader) imei: 3******************9
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3638mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
Click to expand...
Click to collapse
My getvar
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
I s-off my new phone (hboot 1.44) last night with rumrunner here's the steps I took. Unlocked Bootloader - flash TWRP - Flashed ARHD 31.6 - booted up the phone and went through a quick install with no accounts setup. ran rumrunner and about 10 min later it was all done. Note .. turn off Sleep on the phone or set it to 10 min. don't leave the phone unattended on the second pour superSU ask for permission two times .. choose yes
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (10/120)
Waiting
Test 2: Booting device
Waiting for ADB (29/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (10/120)
Waiting for ADB (29/120)
must ferment longer...
chilling..................
smells lovely in here....
heh, just a shot glass for this one....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................
pouring (2).................................
pouring (3)...........
Waiting for ADB (32/120)
must ferment longer...
what's that in the bottle still? rum foul, sloppy, real sloppy...
wait for it.........
yep, done. Hope you enjoyed the rum!
Don't forget to send us all your money - [email protected]
Press ENTER to exit
Click to expand...
Click to collapse
C:\fastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT34************ device
C:\fastboot>adb shell
[email protected]:/ # echo -ne '\x00' | dd of=/dev/block/mmcb
ock/mmcblk0p7 bs=1 seek=4265988
1+0 records in
1+0 records out
1 bytes transferred in 0.009 secs (111 bytes/sec)
[email protected]:/ # exit
exit
C:\fastboot>adb reboot bootloader
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT3***********
(bootloader) imei: 354**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4203mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Click to expand...
Click to collapse
here's the files I used
TWRP 2.6.3.3 - http://techerrata.com/browse/twrp2/m7
ARHD - http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
RumRunner - http://rumrunner.us/
seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026
cr1960 said:
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026
Click to expand...
Click to collapse
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.
seshmaru said:
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.
Click to expand...
Click to collapse
see, you didn't mention anything about GPE in the OP.....
cr1960 said:
see, you didn't mention anything about GPE in the OP.....
Click to expand...
Click to collapse
What my desired outcome is shouldn't be important, I stated that I need S-OFF.
On a side note, is it possible to flash SixthSense 2.1 without S-OFF? The thread itself isn't very clear.
EDIT: Tried it and it does let you.
Anyhow, time to try rumrunner.
Sigh
I've got the much loved purple camera issue and I want to get it sorted under warranty. To do this, I need to not have it say "UNLOCKED" and "TAMPERED" when the salespeople check the phone; to do that, I apparently need to have the phone s-off.
With firewater I get the "whelp, that sucks.." message and with rumrunner it just tells me to download the latest version - which, obviously, I have. Do I have any option other than starting a consumer affairs fight with the retailer over the hardware warranty vs. software? GETVAR detais and so on below - maybe I missed something you guys will spot:
EDIT: I have the latest OTA ready to go, the one with sense 6 - will that help or hinder things?
TIA!
M7_ul pvt ship s-on rh
Hboot 1.56.0000
Radio 4a.23.3263.28
Opendsp v32.120.274.0909
Os 4.20.980.1
eMMC-boot 2048
>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.980.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT37xxxxxxxx
(bootloader) imei: 35xxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4002mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-09ff2ded
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Rumrunner's output:
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
sagewah said:
Sigh
I've got the much loved purple camera issue and I want to get it sorted under warranty. To do this, I need to not have it say "UNLOCKED" and "TAMPERED" when the salespeople check the phone; to do that, I apparently need to have the phone s-off.
With firewater I get the "whelp, that sucks.." message and with rumrunner it just tells me to download the latest version - which, obviously, I have. Do I have any option other than starting a consumer affairs fight with the retailer over the hardware warranty vs. software? GETVAR detais and so on below - maybe I missed something you guys wil spot:
Click to expand...
Click to collapse
Try this route back to stock: GUIDE] Complete Flashing Guide | Rooting | Going Back To Stock
majmoz said:
Try this route back to stock: GUIDE] Complete Flashing Guide | Rooting | Going Back To Stock
Click to expand...
Click to collapse
Hello! Thankyou for the pointer; that would almost do the job. Unfortunately, the salesdroids follow a list of steps to check the phone; it very clearly tells them to make sure the words "unlocked", "relocked" or "tampered" don't appear. Every guide I've seen so far requires me to have s-off to make this happen, however, firewater and rumrunner both fail so far.
I guess I have two questions, and only need an answer to one: can I get unlocked and tampered removed without s-off? Or is there another way to get s-off I haven't found yet that would work with my m7?
Cheers!
sagewah said:
Hello! Thankyou for the pointer; that would almost do the job. Unfortunately, the salesdroids follow a list of steps to check the phone; it very clearly tells them to make sure the words "unlocked", "relocked" or "tampered" don't appear. Every guide I've seen so far requires me to have s-off to make this happen, however, firewater and rumrunner both fail so far.
I guess I have two questions, and only need an answer to one: can I get unlocked and tampered removed without s-off? Or is there another way to get s-off I haven't found yet that would work with my m7?
Cheers!
Click to expand...
Click to collapse
If you are getting the whelp message with firewater, then you wont get s-off no matter what you try, I think I tried every kernel and rom combination on this planet.
Answer to the first question, NO, you MUST have s-off to do that
Answer to the second question, you can find someone local to you like I did and have them s-off it by java card as I did, like a little local back street phone shop.
Seanie280672 said:
If you are getting the whelp message with firewater, then you wont get s-off no matter what you try, I think I tried every kernel and rom combination on this planet.
Click to expand...
Click to collapse
Bugger. Do we have any definitive answer as to why (which might hint at a when)? I've seen a few theories, but they all seemed like rubbish. If there's an effort underway to fix this, how do we help?
Answer to the second question, you can find someone local to you like I did and have them s-off it by java card as I did, like a little local back street phone shop.
Click to expand...
Click to collapse
Which would suit me just fine, i just want this thing fixed enough to get through warranty Anybody in .au got any recommendations?
Thanks!
sagewah said:
Bugger. Do we have any definitive answer as to why (which might hint at a when)? I've seen a few theories, but they all seemed like rubbish. If there's an effort underway to fix this, how do we help?
Click to expand...
Click to collapse
fingers crossed, sit back and wait, there's nothing more you can do and no promises it will ever be fixed.
sagewah said:
Which would suit me just fine, i just want this thing fixed enough to get through warranty Anybody in .au got any recommendations?
Thanks!
Click to expand...
Click to collapse
Google is your friend, I found a shop in Sheffield UK, about 80miles from me, thankfully im up there a lot so the distance was no biggie for me, got it sorted today, took him 5 mins.