[SOLVED] Q: Unlocked, TWRP, no OS, please help. - One (M7) Q&A, Help & Troubleshooting

Hello,
so my phone was in boot loop and i did hard reset it was ok for few hours.
after that started again, so i went in TWRP and wiped everything, now i don't have os.
I tryd with ADB sideload but every rom i tryd i get error:
sideload mode e:error executing updater binary in zip '/data/
or
error flashing zip updating partition details
or
set_metadata_recursive: some changes failed
i tryd with different ROMs but i think my main problem is i don't know which ROM to download.
ALso i tryd to relock bootloader and flash RUU .zip
again i downloaded few RUUs but every time i got same message:
target reported max download size of 1526722560 bytes
sending 'zip' (1154791 KB)...
OKAY [ 39.480s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 158.984s
Also i have downloaded few .exe RUUs but still I'm getting some errors.
now I have unlocked bootloader again and install TWRP and I'm downloading 8th ROM. Im trying to solve this for 2days, and with my slow net I'm downloading ROM FOR 3-4h.
Can anyone help me to download correct ROM and tell me which one?
My device info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
Can someone help to chose and download correct ROM which is going to work? Thanks

Kocka86 said:
Hello,
so my phone was in boot loop and i did hard reset it was ok for few hours.
after that started again, so i went in TWRP and wiped everything, now i don't have os.
I tryd with ADB sideload but every rom i tryd i get error:
sideload mode e:error executing updater binary in zip '/data/
or
error flashing zip updating partition details
or
set_metadata_recursive: some changes failed
i tryd with different ROMs but i think my main problem is i don't know which ROM to download.
ALso i tryd to relock bootloader and flash RUU .zip
again i downloaded few RUUs but every time i got same message:
target reported max download size of 1526722560 bytes
sending 'zip' (1154791 KB)...
OKAY [ 39.480s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 158.984s
Also i have downloaded few .exe RUUs but still I'm getting some errors.
now I have unlocked bootloader again and install TWRP and I'm downloading 8th ROM. Im trying to solve this for 2days, and with my slow net I'm downloading ROM FOR 3-4h.
Can anyone help me to download correct ROM and tell me which one?
My device info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
Can someone help to chose and download correct ROM which is going to work? Thanks
Click to expand...
Click to collapse
what is you twrp version, and what version of ruu.zip have you tried to flash (what is the complete file name?)

alray said:
what is you twrp version, and what version of ruu.zip have you tried to flash (what is the complete file name?)
Click to expand...
Click to collapse
TWRP = 2.6.3.0
i tryd to flash:
RUU M7 UL K44 SENSE55 MR Cingular US 4.18.502.7 R10 Radio 4T.24.3218.09 10.26.1718.01L Release 356565 Signed 2
RUU Zip M7 UL JB43 SENSE50 MR Cingular US 3.17.502.3-decrypted
RUU M7 UL JB 50 Cingular US 1.26.502.15 Radio 4A.17.3250.20 10.40.1150.04 Release 326691 Signed 2
Download Android Revolution HD 71.1
Download Android Revolution HD 53.0
Stock KitKat (Android 4.4.2 + HTC Sense 6.0) Download stock odexed 5.11.401.10
and few more i downloaded from htc1guru but I'm not sure anymore which one... i deleted douse they didn't work

Kocka86 said:
TWRP = 2.6.3.0
i tryd to flash:
RUU M7 UL K44 SENSE55 MR Cingular US 4.18.502.7 R10 Radio 4T.24.3218.09 10.26.1718.01L Release 356565 Signed 2 ---> this one should have worked, but users have reported ruu is broken (image error)
RUU Zip M7 UL JB43 SENSE50 MR Cingular US 3.17.502.3-decrypted -----> this one require s-off because its a decrypted version, you are s-on
RUU M7 UL JB 50 Cingular US 1.26.502.15 Radio 4A.17.3250.20 10.40.1150.04 Release 326691 Signed 2 ---> this one require s-off because its a downgrade, you are s-on
Download Android Revolution HD 71.1 ---> this rom require twrp 2.6.3.3
Download Android Revolution HD 53.0 ---> this rom require twrp 2.6.3.3
Stock KitKat (Android 4.4.2 + HTC Sense 6.0) Download stock odexed 5.11.401.10 --> this one isnt for at&t
and few more i downloaded from htc1guru but I'm not sure anymore which one... i deleted douse they didn't work
Click to expand...
Click to collapse
you need twrp 2.6.3.3 or 2.6.3.4 to flash arhd roms
flash twrp 2.6.3.3
adb push or adb sideload arhd 71.1
install using twrp 2.6.3.3
or you can install the guru reset rom posted by cIsA : http://www.htc1guru.com/dld/guru_reset_m7_5-12-502-2_clsa-zip/
instruction how to flash guru reset rom:

alray said:
you need twrp 2.6.3.3 or 2.6.3.4 to flash arhd roms
Click to expand...
Click to collapse
ok thx. i will try it now.

Kocka86 said:
ok thx. i will try it now.
Click to expand...
Click to collapse
hm.. now when i go to recovery (new version) its asking me for some password... i can push cancel..
and when i try ADB sideload now is not working...i got message:
Updating partition details
E:failed to decrypt data

Kocka86 said:
hm.. now when i go to recovery (new version) its asking me for some password... i can push cancel..
and when i try ADB sideload now is not working...i got message:
Updating partition details
E:failed to decrypt data
Click to expand...
Click to collapse
looks like you have activated phone storage encryption from Settings ---> Storage ---> Phone storage encryption.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
enter your password and it should be fine

alray said:
you need twrp 2.6.3.3 or 2.6.3.4 to flash arhd roms
/QUOTE]
wohooo.. i managed to do it..! many thanks!!!!!
Click to expand...
Click to collapse

Kocka86 said:
alray said:
you need twrp 2.6.3.3 or 2.6.3.4 to flash arhd roms
Click to expand...
Click to collapse
wohooo.. i managed to do it..! many thanks!!!!!
Click to expand...
Click to collapse
just for my own curiosity, what was wrong with encryption? did you entered the correct password? Would like to know, never played with encryption myself.
and can you edit your first post and add [solved] to your title? click "edit/delete then "go advanced" and edit your title. thanks

alray said:
looks like you have activated phone storage encryption from Settings ---> Storage ---> Phone storage encryption.
enter your password and it should be fine
Click to expand...
Click to collapse
hm.. i didnt use this password at all..
anyway in TWRP i went to fix permission, wipe data and it was working... after didn't ask for password..
thank you!!

Kocka86 said:
hm.. i didnt use this password at all..
anyway in TWRP i went to fix permission, wipe data and it was working... after didn't ask for password..
thank you!!
Click to expand...
Click to collapse
np

Related

Help with my htc one m7 unrooting

i didnt back up my stock recovery and now i need one because most of my important apps are not root supported
and i want to go back to stock recovery my CID is [HTC-001] i currently have stock rom installed with cwm recovery
http://forum.xda-developers.com/showthread.php?t=2182823
Here you go
tommydee90 said:
i didnt back up my stock recovery and now i need one because most of my important apps are not root supported
and i want to go back to stock recovery my CID is [HTC-001] i currently have stock rom installed with cwm recovery
Click to expand...
Click to collapse
did you try here?
http://forum.xda-developers.com/showthread.php?t=2182823
Bonely said:
did you try here?
http://forum.xda-developers.com/showthread.php?t=2182823
Click to expand...
Click to collapse
im doing that now but its stick on this
C:\Android>fastboot flash zip firmware.zip
sending 'zip' (37873 KB)...
_
OH NO YOU'VE BRICKED IT!!!!
Just Kidding. If you are still there after 5 mins try another USB port. Make sure it's not a splitter or HUB. If you are to sending all the drivers are good.
nullkill said:
OH NO YOU'VE BRICKED IT!!!!
Just Kidding. If you are still there after 5 mins try another USB port. Make sure it's not a splitter or HUB. If you are to sending all the drivers are good.
Click to expand...
Click to collapse
lol you nearly gave me heart attack
i switched usb ports and now i got this message
C:\Android>fastboot flash zip firmware.zip
sending 'zip' (37873 KB)...
OKAY [ 2.817s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: not allowed)
finished. total time: 2.841s
C:\Android>
i think its worked i just rebooted but i still have the supersu installer and i cant remove it and some built in apps missing
tommydee90 said:
lol you nearly gave me heart attack
i switched usb ports and now i got this message
C:\Android>fastboot flash zip firmware.zip
sending 'zip' (37873 KB)...
OKAY [ 2.817s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: not allowed)
finished. total time: 2.841s
C:\Android>
i think its worked i just rebooted but i still have the supersu installer and i cant remove it and some built in apps missing
Click to expand...
Click to collapse
Sorry just couldn't help myself. HTC's are very hard to brick and fairly easy to recover so don't worry about that.
Ok so a couple of questions. You followed that guide so then your HBOOT bootloader says Re-locked correct?
Last do this in fastboot fastboot getvar all
Please post the results.
---------- Post added at 10:24 AM ---------- Previous post was at 10:21 AM ----------
Also that guide that was posted is to install Android Revolution not a stock firmware if you are trying to go back to stock http://forum.xda-developers.com/showthread.php?t=2207874 This is what you need. What phone do you have? Europe model guessing from avatar?
nullkill said:
Sorry just couldn't help myself. HTC's are very hard to brick and fairly easy to recover so don't worry about that.
Ok so a couple of questions. You followed that guide so then your HBOOT bootloader says Re-locked correct?
Last do this in fastboot fastboot getvar all
Please post the results.
---------- Post added at 10:24 AM ---------- Previous post was at 10:21 AM ----------
Also that guide that was posted is to install Android Revolution not a stock firmware if you are trying to go back to stock http://forum.xda-developers.com/showthread.php?t=2207874 This is what you need. What phone do you have? Europe model guessing from avatar?
Click to expand...
Click to collapse
***tampered***
***unlocked***
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.049s
tommydee90 said:
***tampered***
***unlocked***
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.049s
Click to expand...
Click to collapse
Ok well let's get you back to stock. You have two options you can flash a nandroid back up via CWM clockworkmod or you can do a RUU. I recommend doing a the CWM way as it's easier and less prone to problems. So go to this link http://forum.xda-developers.com/showthread.php?t=2207874 scroll down and find
Stock Nandroid Backups:
you want M7 CWM Nandroid Backup / CID HTC__001 / 1.28.401.7
We know this as your CID is cidnum: HTC__001 so you can only flash things for HTC__001. After you get that file flash clockworkmod recovery if you don't already. Then put that zip on SD card of your phone /sdcard/clockworkmod/backup/
go into restore and you are back to stock my friend.
nullkill said:
Ok well let's get you back to stock. You have two options you can flash a nandroid back up via CWM clockworkmod or you can do a RUU. I recommend doing a the CWM way as it's easier and less prone to problems. So go to this link http://forum.xda-developers.com/showthread.php?t=2207874 scroll down and find
Stock Nandroid Backups:
you want M7 CWM Nandroid Backup / CID HTC__001 / 1.28.401.7
We know this as your CID is cidnum: HTC__001 so you can only flash things for HTC__001. After you get that file flash clockworkmod recovery if you don't already. Then put that zip on SD card of your phone /sdcard/clockworkmod/backup/
go into restore and you are back to stock my friend.
Click to expand...
Click to collapse
ok so how do i put the zip on the sd card.. i went to recovery mounts and storage and then ??? (nothing pops up on my laptop like storage device)
tommydee90 said:
ok so how do i put the zip on the sd card.. i went to recovery mounts and storage and then ??? (nothing pops up on my laptop like storage device)
Click to expand...
Click to collapse
Man this phone is not working with you
Have you tried to boot the phone up normally. I know you think at this point it wont boot but I would bet it still will. If so you have your answer if not we get to have some ADB fun OH JOY
adb push <local> <remote> - copy file/dir to device
so the command would look like this using ADB
adb push nameofbackup.zip /sdcard/clockworkmod/backup
I am assuming you are familiar with ADB if not let me know
nullkill said:
Man this phone is not working with you
Have you tried to boot the phone up normally. I know you think at this point it wont boot but I would bet it still will. If so you have your answer if not we get to have some ADB fun OH JOY
adb push <local> <remote> - copy file/dir to device
so the command would look like this using ADB
adb push nameofbackup.zip /sdcard/clockworkmod/backup
I am assuming you are familiar with ADB if not let me know
Click to expand...
Click to collapse
no i dont know what ADB is sorry for been such a noob lol,, but the phone boots up and works
tommydee90 said:
no i dont know what ADB is sorry for been such a noob lol,, but the phone boots up and works
Click to expand...
Click to collapse
We all were noobs at some point right! This is how you learn. If the phone boots up can your computer see it? If so copy the files over to the phone and then go back into recovery and do restore.
nullkill said:
We all were noobs at some point right! This is how you learn. If the phone boots up can your computer see it? If so copy the files over to the phone and then go back into recovery and do restore.
Click to expand...
Click to collapse
ok so i dragged and dropped the zip file and then went to recovery and hit restore ans it says no files found
tommydee90 said:
ok so i dragged and dropped the zip file and then went to recovery and hit restore ans it says no files found
Click to expand...
Click to collapse
So close I can taste victory...
Ok so you need to put the file at sdcard/clockworkmod/backups/ or it will not be found. If you did that and still are not having sucess then go into CWM recovery again and create a new backup doesn't need to be everything just something. Now reboot the phone and connect it to your computer and start searching for where it put that backup you just made. Once you find it put the zip there. Then go back to CWM and restore and keep your fingers crossed maybe do a little good luck dance.
nullkill said:
So close I can taste victory...
Ok so you need to put the file at sdcard/clockworkmod/backups/ or it will not be found. If you did that and still are not having sucess then go into CWM recovery again and create a new backup doesn't need to be everything just something. Now reboot the phone and connect it to your computer and start searching for where it put that backup you just made. Once you find it put the zip there. Then go back to CWM and restore and keep your fingers crossed maybe do a little good luck dance.
Click to expand...
Click to collapse
still nothing mate i dont know what im doing wrong do you have team viewer to see what ive done?
tommydee90 said:
still nothing mate i dont know what im doing wrong do you have team viewer to see what ive done?
Click to expand...
Click to collapse
I don't sorry. I have an idea it will take me ten minutes I need to download the nandroid backup. I think that the zip is not the backup and that you need to decompress the backup to the sdcard of your phone. Gotta wait till it's done downloading to confirm and tell you if you need to put it somewhere special or if it will do it on it's own. Really should have looked into this first sorry Noob mistake on my part
nullkill said:
I don't sorry. I have an idea it will take me ten minutes I need to download the nandroid backup. I think that the zip is not the backup and that you need to decompress the backup to the sdcard of your phone. Gotta wait till it's done downloading to confirm and tell you if you need to put it somewhere special or if it will do it on it's own. Really should have looked into this first sorry Noob mistake on my part
Click to expand...
Click to collapse
ok mate but it also could be my fault lol let me know whats going wrong
tommydee90 said:
ok mate but it also could be my fault lol let me know whats going wrong
Click to expand...
Click to collapse
*&**
So um yeah. Just go ahead and extract the 2013-03-30.16.15.27.zip to your phone /sdcard/clockworkmod/backup/ it will make a folder called 2013-03-30.16.15.27 or something then go into recovery and go to restore and you will find it and hit restore. If you have a bootloop after go into recovery and then wipe system cache data and then do restore again. First boot can take 3 mins
nullkill said:
*&**
So um yeah. Just go ahead and extract the 2013-03-30.16.15.27.zip to your phone /sdcard/clockworkmod/backup/ it will make a folder called 2013-03-30.16.15.27 or something then go into recovery and go to restore and you will find it and hit restore. If you have a bootloop after go into recovery and then wipe system cache data and then do restore again. First boot can take 3 mins
Click to expand...
Click to collapse
i still get no files found
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] No android, no recovery, only bootloader... :(

Dear XDA,
I wanted to update my HTC One to Revolution HD. But there where some requirements before i could install that. Like updating the firmware and installing TWRP recovery. I needed to RELOCK my phone in order to update my firmware. So i did that using a tutorial. After that i only had to push the RUU and i would be back @ stock. And then i could flash Revolution HD to get 4.4!
But!... it went horribly wrong. As of right now, i can only enter fastboot. I cannot enter recovery, and there is no Android installed, so basically i'm screwed.
I do have some flashing experience and I'm not a complete newb, but this is out of my league. Perhaps there are some nice persons here that could help me out. I will try to summarise my phone settings:
My current settings in Fastboot:
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
May 3 2013,17:22:59:-1
CID: HTC_E11
MID: PN0710000
I have a nandroidback, but i can't get into recovery. I tried using ADB but my device is not recognised.... I get the feeling that S-ON needs to change to S-OFF. But if i use a toolkit (from Squabbi) i can't get my device S-OFF (device not recognised..).
As of right now, I'm sitting with my hands in my hair thinking i bricked my phone.
If someone could help me, you would save my day.
Lennard Breevaart.
ps: I'm using windows xp
len.asdf said:
Dear XDA,
I wanted to update my HTC One to Revolution HD. But there where some requirements before i could install that. Like updating the firmware and installing TWRP recovery. I needed to RELOCK my phone in order to update my firmware. So i did that using a tutorial. After that i only had to push the RUU and i would be back @ stock. And then i could flash Revolution HD to get 4.4!
But!... it went horribly wrong. As of right now, i can only enter fastboot. I cannot enter recovery, and there is no Android installed, so basically i'm screwed.
I do have some flashing experience and I'm not a complete newb, but this is out of my league. Perhaps there are some nice persons here that could help me out. I will try to summarise my phone settings:
My current settings in Fastboot:
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
May 3 2013,17:22:59:-1
CID: HTC_E11
MID: PN0710000
I have a nandroidback, but i can't get into recovery. I tried using ADB but my device is not recognised.... I get the feeling that S-ON needs to change to S-OFF. But if i use a toolkit (from Squabbi) i can't get my device S-OFF (device not recognised..).
As of right now, I'm sitting with my hands in my hair thinking i bricked my phone.
If someone could help me, you would save my day.
Lennard Breevaart.
ps: I'm using windows xp
Click to expand...
Click to collapse
is your bootloader unlocked ? do that first
what version of TWRP do you have (exact name)
do you have fastboot/adb on your pc and do you know how to use them ?
is your bootloader unlocked ? do that first
==> I think so, how can i check?
what version of TWRP do you have (exact name)
==> I have no recovery installed on my phone. But i have TWRP version 2.6.3.3. img on my computer, ready to push it to my phone (but it gives the error: device not found)
do you have fastboot/adb on your pc and do you know how to use them ?
==> I think i do. When i try to do adb shell in command window it replies with either device not found, or adb server out of date. Killing...
Thanks for replying btw!
len.asdf said:
is your bootloader unlocked ? do that first
==> I think so, how can i check?
what version of TWRP do you have (exact name)
==> I have no recovery installed on my phone. But i have TWRP version 2.6.3.3. img on my computer, ready to push it to my phone (but it gives the error: device not found)
do you have fastboot/adb on your pc and do you know how to use them ?
==> I think i do. When i try to do adb shell in command window it replies with either device not found, or adb server out of date. Killing...
Thanks for replying btw!
Click to expand...
Click to collapse
take these files
extract fastboot.zip to c:\fastboot
and install these drivers
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
MD5: e2a21d71954d4164c1a116abb926a363
and see if you can get:
fastboot getvar all
and post the results minus you serial no and IEMI
clsA said:
take these files
extract fastboot.zip to c:\fastboot
and install these drivers
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
MD5: e2a21d71954d4164c1a116abb926a363
and see if you can get:
fastboot getvar all
and post the results minus you serial no and IEMI
Click to expand...
Click to collapse
Thanks! This is what i did to get my results:
1. Downloaded both the fastboot.zip and the drivers (and installed ofcourse).
2. Opened a command window on c:\fastboot
3. typed: fastboot getvar all
Results:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4222mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.047s
C:\fastboot>
len.asdf said:
Thanks! This is what i did to get my results:
1. Downloaded both the fastboot.zip and the drivers (and installed ofcourse).
2. Opened a command window on c:\fastboot
3. typed: fastboot getvar all
Results:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4222mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.047s
C:\fastboot>
Click to expand...
Click to collapse
Your phone is basically still stock andriod version 4.1.2
(this is good you can s-off pretty easy)
what RUU were you going to flash ?
this is the version of recovery you need
http://techerrata.com/browse/twrp2/m7ul
download it and put it in your fastboot folder
then to flash it:
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
now you can enter recovery correct ?
clsA said:
Your phone is basically still stock andriod version 4.1.2
(this is good you can s-off pretty easy)
what RUU were you going to flash ?
Click to expand...
Click to collapse
The RUU i tried was this one: RUU M7 U JB 50 HTC Europe 1.29.401.2 R Radio 4A.14.3250.13 10.33.1150.01 Release 311663 Signed 2 4
(from: http://forum.xda-developers.com/showthread.php?t=2428276)
While installing the RUU it gave me an an error that my CID and MID didn't match.
clsA said:
Your phone is basically still stock andriod version 4.1.2
(this is good you can s-off pretty easy)
what RUU were you going to flash ?
this is the version of recovery you need
http://techerrata.com/browse/twrp2/m7ul
download it and put it in your fastboot folder
Click to expand...
Click to collapse
Downloaded the recovery and put in the the fastboot folder
clsA said:
Your phone is basically still stock andriod version 4.1.2
(this is good you can s-off pretty easy)
what RUU were you going to flash ?
this is the version of recovery you need
http://techerrata.com/browse/twrp2/m7ul
download it and put it in your fastboot folder
then to flash it:
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
now you can enter recovery correct ?
Click to expand...
Click to collapse
While in ADB it gave this error:
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
sending 'recovery' (9840 KB)...
OKAY [ 1.297s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.891s
C:\fastboot>
edit: I cannot enter recovery yet. Just tried it
len.asdf said:
While in ADB it gave this error:
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
sending 'recovery' (9840 KB)...
OKAY [ 1.297s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.891s
C:\fastboot>
edit: I cannot enter recovery yet. Just tried it
Click to expand...
Click to collapse
your bootloader is still locked
clsA said:
your bootloader is still locked
Click to expand...
Click to collapse
I checked the md5 (f428caf36c9c337e2ae417fc10fbe165) with the file i downloaded. And it matches
len.asdf said:
I checked the md5 (f428caf36c9c337e2ae417fc10fbe165) with the file i downloaded. And it matches
Click to expand...
Click to collapse
yeah i realize that your bootloader is still locked
you need to go to htcdev and unlock again
then flash recovery
clsA said:
yeah i realize that your bootloader is still locked
you need to go to htcdev and unlock again
Click to expand...
Click to collapse
Ah ok, I will be doing that then . I will update this topic when i'm done.
len.asdf said:
Ah ok, I will be doing that then . I will update this topic when i'm done.
Click to expand...
Click to collapse
be warned unlocking will wipe the phone you'll be starting from nothing
clsA said:
be warned unlocking will wipe the phone you'll be starting from nothing
Click to expand...
Click to collapse
I know! But don't worry, it's the least of my problems now
Unlocked my phone, and gonna flash the recovery aswell!
But to not make the same mistake twice. What is the best way to update my phone to 4.4?
I wanted to install Revolution HD. But maybe you have a better alternative?
And how can i properly thank you? I mean, you just saved my ass!
len.asdf said:
And how can i properly thank you? I mean, you just saved my ass!
Click to expand...
Click to collapse
it's no problem
you should try and get s-off next
http://forum.xda-developers.com/showthread.php?t=2314582 - revone
ARHD is great .. I also use ViperOne
just use the sideload feature in twrp being your phone is wiped
Quote:
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload name_of_rom.zip
or
adb push Rom.zip /data/media/0/
Click to expand...
Click to collapse
clsA said:
it's no problem
you should try and get s-off next
http://forum.xda-developers.com/showthread.php?t=2314582 - revone
ARHD is great .. I also use ViperOne
just use the sideload feature in twrp being your phone is wiped
Click to expand...
Click to collapse
I will get s-off through the HTC One All in one toolkit. But on the ARHD topic, this was posted aswell:
You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF
Custom recovery
Firmware package from here (recommended but not needed for now)
Read this flashing guide - [GUIDE] Complete Flashing Guide | Rooting | Going Back To Stock
So i tried to get the latest firmware, and that's where the problems started. But shouldn't it be better to have the latest firmware? I mean it stands there for a reason, right? Or am I wrong?
Anyway, i will try ARHD for now, it looks nice
Thanks again!
len.asdf said:
I will get s-off through the HTC One All in one toolkit. But on the ARHD topic, this was posted aswell:
You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF
Custom recovery
Firmware package from here (recommended but not needed for now)
Read this flashing guide - [GUIDE] Complete Flashing Guide | Rooting | Going Back To Stock
So i tried to get the latest firmware, and that's where the problems started. But shouldn't it be better to have the latest firmware? I mean it stands there for a reason, right? Or am I wrong?
Anyway, i will try ARHD for now, it looks nice
Thanks again!
Click to expand...
Click to collapse
firmware comes after s-off
and ARHD 31.6 is your best bet for now till your s-off

[Q] HTC One bricked HELP

hi,
yesterday i was trying to install a rom, when some errors occured leading to the recovery being wiped and me being left with just a bootloader.
since, i have tried to install a recovery with fastboot, but the phone just loads and then restarts straight away. i have tried to do an RUU, but i cant find the right one. I dont know what to do, i cannot boot my phone into recovery. These are the details that fastboot is giving me:
HBOOT- 1.55.0000
RADIO:- 4a.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1.
The phone is from the UK and is on O2. i have tried the HTC1guru RUU which is UK O2 but it gives me error 131(the wrong RUU).
Please can i have some help?????
cheers
yeah i know
robbiewhone said:
hi,
yesterday i was trying to install a rom, when some errors occured leading to the recovery being wiped and me being left with just a bootloader.
since, i have tried to install a recovery with fastboot, but the phone just loads and then restarts straight away. i have tried to do an RUU, but i cant find the right one. I dont know what to do, i cannot boot my phone into recovery. These are the details that fastboot is giving me:
HBOOT- 1.55.0000
RADIO:- 4a.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1.
The phone is from the UK and is on O2. i have tried the HTC1guru RUU which is UK O2 but it gives me error 131(the wrong RUU).
Please can i have some help?????
cheers
Click to expand...
Click to collapse
I have kind of the same problem. When i try to put it in recovery it reboots into recovery an then really fast it reboots fast into boot logo. I have tried every option on htc one tool kit, tried to do a RUU, tried to do flash a new rom manually even changing from cwm to twrp didn't work. any help?
Phone is:
Unlocked
Tampered
S-on
Hboot-1.44.0000
Radio-4A.14.3250.13
Open DSP-v26.120.274.0202
robbiewhone said:
hi,
yesterday i was trying to install a rom, when some errors occured leading to the recovery being wiped and me being left with just a bootloader.
since, i have tried to install a recovery with fastboot, but the phone just loads and then restarts straight away. i have tried to do an RUU, but i cant find the right one. I dont know what to do, i cannot boot my phone into recovery. These are the details that fastboot is giving me:
HBOOT- 1.55.0000
RADIO:- 4a.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1.
The phone is from the UK and is on O2. i have tried the HTC1guru RUU which is UK O2 but it gives me error 131(the wrong RUU).
Please can i have some help?????
cheers
Click to expand...
Click to collapse
Can you post a fastboot getvar all ( delete IMEI and S/N)
Zenosx said:
I have kind of the same problem. When i try to put it in recovery it reboots into recovery an then really fast it reboots fast into boot logo. I have tried every option on htc one tool kit, tried to do a RUU, tried to do flash a new rom manually even changing from cwm to twrp didn't work. any help?
Phone is:
Unlocked
Tampered
S-on
Hboot-1.44.0000
Radio-4A.14.3250.13
Open DSP-v26.120.274.0202
Click to expand...
Click to collapse
not sure you have the same problem as the OP, your problem should be solved by a "fastboot erase cache"
(assuming the recovery you flashed isn't a bad download, did you check MD5?)
robbiewhone said:
hi,
yesterday i was trying to install a rom, when some errors occured leading to the recovery being wiped and me being left with just a bootloader.
since, i have tried to install a recovery with fastboot, but the phone just loads and then restarts straight away. i have tried to do an RUU, but i cant find the right one. I dont know what to do, i cannot boot my phone into recovery. These are the details that fastboot is giving me:
HBOOT- 1.55.0000
RADIO:- 4a.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1.
The phone is from the UK and is on O2. i have tried the HTC1guru RUU which is UK O2 but it gives me error 131(the wrong RUU).
Please can i have some help?????
cheers
Click to expand...
Click to collapse
there is no RUU for O2... what exactly were you flashing, what errors? please more details (with links), and as mentioned above, a "fastboot getvar all" (excluding IMEI and s/n)
733 evloopr
well is there an RUU i can use? i really dont know what to do, i have now got access to a recovery but i cant seem to install any roms through adb sideloading. i think it might be because there isnt a file system in place to install it to?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4328mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
robbiewhone said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
all: Done!
Click to expand...
Click to collapse
well you don't have an O2 branded phone, you may be with O2, but your phone is international unbranded.
you may want to consider S-Off before upgrading to 4.xx
but in either case: get TWRP from:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct, that site does not play nice with download managers)
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then you'll have custom recovery, and can install any ROM you like
Do not try to S-Off
considering that the device is currently "bricked" S-Off is the LAST thing you want to do, as it prevents you from ACTUALLY bricking your phone to the point of no return. However, as long as the OP can get into fastboot, since aparently only the bootloader is available, you should be able to flash a custom recovery, like TWRP or CWM. I very nearly bricked my One from a similar situation. Also, is your bootloader unlocked? I assume it is since you were trying to flash a non-stock ROM
Can now get into recovery, and am trying to install roms through adb. Ive tried many different roms, but they all come up with errors saying that it cannot mount ... Different partions (data, etc). I cannot adb push any roms into the sdcard either due to more errors. Cheers
robbiewhone said:
Can now get into recovery, and am trying to install roms through adb. Ive tried many different roms, but they all come up with errors saying that it cannot mount ... Different partions (data, etc). I cannot adb push any roms into the sdcard either due to more errors. Cheers
Click to expand...
Click to collapse
Now am getting erro "E:error in /tmp/update.zip
Imstallation abortedt"
Bump.. Anyone??
robbiewhone said:
Can now get into recovery, and am trying to install roms through adb. Ive tried many different roms, but they all come up with errors saying that it cannot mount ... Different partions (data, etc). I cannot adb push any roms into the sdcard either due to more errors. Cheers
Click to expand...
Click to collapse
robbiewhone said:
Now am getting erro "E:error in /tmp/update.zip
Imstallation abortedt"
Click to expand...
Click to collapse
can you be more specific which partition TWRP is unable to mount? because "unable to mount /cache...." is perfectly normal.
on the other hand "unable to mount /data" is not so good (could be a corrupt partition or a hardware problem), you'll have to select "Format data" in TWRP's wipe section.
not knowing what you flashed, it's hard to guess what's wrong.
you could try running "e2fsck -n -f -v /dev/block/mmcblk0p37" in an adb shell to see if you have a corrupt data partition. Here's an example of what a corrupt data partition could look like: http://forum.xda-developers.com/showthread.php?t=2512105
nkk71 said:
can you be more specific which partition TWRP is unable to mount? because "unable to mount /cache...." is perfectly normal.
on the other hand "unable to mount /data" is not so good (could be a corrupt partition or a hardware problem), you'll have to select "Format data" in TWRP's wipe section.
not knowing what you flashed, it's hard to guess what's wrong.
you could try running "e2fsck -n -f -v /dev/block/mmcblk0p37" in an adb shell to see if you have a corrupt data partition. Here's an example of what a corrupt data partition could look like: http://forum.xda-developers.com/showthread.php?t=2512105
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the error i got after trying to adb install the guru reset M7 3.62.401.1.zip in particular, however this same error occurs with some other roms also.
robbiewhone said:
View attachment 2660575 this is the error i got after trying to adb install the guru reset M7 3.62.401.1.zip in particular, however this same error occurs with some other roms also.
Click to expand...
Click to collapse
1- you're recovery is seriously outdated
2- try adb push instead:
adb push <name of rom>.zip /sdcard/ <- this will take about 5 to 6 minutes not showing any progress, until it finishes
3- are you sure the download isn't corrupt? have you checked MD5
Ok im starting agin.
Updated recovery, downloading a new rom (insertcoin) and making sure the md5s match.
Does adb sideload have a size limit??
robbiewhone said:
Ok im starting agin.
Updated recovery, downloading a new rom (insertcoin) and making sure the md5s match.
Does adb sideload have a size limit??
Click to expand...
Click to collapse
i guess everything has a limit, but all the ROMs are being sideloaded just fine. I personally prefer adb push in these situations, as i can check md5 after it's on the phone, for example
Code:
C:\ADB3>[B][COLOR="Blue"]adb devices[/COLOR][/B]
List of devices attached
HT34xxxxxxxx recovery [I][SIZE="1"]<- you are now in recovery[/SIZE][/I]
C:\ADB3>[B][COLOR="Blue"]adb push Android_Revolution_HD-One_52.0.zip /sdcard/[/COLOR][/B]
2990 KB/s (1172224138 bytes in 382.835s)
[I][U][SIZE="1"]Just to double-check the file is not corrupt[/SIZE][/U][/I]
C:\ADB3>[B][COLOR="Blue"]adb shell md5sum /sdcard/Android_Revolution_HD-One_52.0.zip[/COLOR][/B]
2eff0d37fec5789b946c43f7da2c13bf /sdcard/Android_Revolution_HD-One_52.0.zip
[INDENT]from the OP:
Android Revolution HD 52.0 -- MD5 sum: 2EFF0D37FEC5789B946C43F7DA2C13BF --
==> so all is good :)[/INDENT]
C:\ADB3>
-> in recovery, select "install" and install the ROM
YEEEEEEESSSS
fixed it
robbiewhone said:
YEEEEEEESSSS
after 72 hours of trying, my phone is now fixed! What a relief thanks everyone!!
Ended up reinstalling windows 7 on my pc and first time with insert coin adb sideload and it works!!
Woo
Click to expand...
Click to collapse
Congrats mate, please edit main thread title to include [SOLVED]
and btw, it's always polite to press the thanks button when a post is useful

[Q] need to flash back to custom rom from RUU

After flashing a RUU via Aurora Installer, I am unable to flash any ROM.
I have tried flashing Carbon ROM with both TWRP and CWM Touch, but it boots, loads initial set-up and then boot loops.
I have also previously tried flashing Cyanogen mod and Paranoid Android but to no avail
I need to go back to a custom ROM as I am unable to charge with the RUU if the phone is on.
Bootloader
***UNLOCKED***
M7_UL PVT SHIP S-FF RH
CID-11111111
HBOOT-1.44.0000
OpenDSP-V32.120.2740909
eMMC-BOOT
parthami said:
After flashing a RUU via Aurora Installer, I am unable to flash any ROM.
I have tried flashing Carbon ROM with both TWRP and CWM Touch, but it boots, loads initial set-up and then boot loops.
I have also previously tried flashing Cyanogen mod and Paranoid Android but to no avail
I need to go back to a custom ROM as I am unable to charge with the RUU if the phone is on.
Bootloader
***UNLOCKED***
M7_UL PVT SHIP S-FF RH
CID-11111111
HBOOT-1.44.0000
OpenDSP-V32.120.2740909
eMMC-BOOT
Click to expand...
Click to collapse
What version of TWRP ? ... it's important that you use the version recommended by the rom your flashing
I have tried both 2.7.1.0 and 2.8.3.0 but sadly it still bootloops
parthami said:
After flashing a RUU via Aurora Installer, I am unable to flash any ROM.
I have tried flashing Carbon ROM with both TWRP and CWM Touch, but it boots, loads initial set-up and then boot loops.
I have also previously tried flashing Cyanogen mod and Paranoid Android but to no avail
I need to go back to a custom ROM as I am unable to charge with the RUU if the phone is on.
Bootloader
***UNLOCKED***
M7_UL PVT SHIP S-FF RH
CID-11111111
HBOOT-1.44.0000
OpenDSP-V32.120.2740909
eMMC-BOOT
Click to expand...
Click to collapse
Ok first off. An RUU is the program HTC uses to flash the OS to your device. It is not the OS. it sounds like you are not properly wiping the device before installing. Alos avoid any CWM recoveries. They are well known to be buggy and not the best option.
1. Use adb and fastboot to flash TWRP recovery
2. Format, system, data, cache and delvic cache
3. Flash the rom.
This will wipe all data on your device for apps and settings. So make sure you backup.
parthami said:
I have tried both 2.7.1.0 and 2.8.3.0 but sadly it still bootloops
Click to expand...
Click to collapse
are you doing all 3 steps ?
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
I see your on hboot 1.44 is your firmware still that old ?
post your fastboot getvar all and lets update your firmware
zelendel said:
Ok first off. An RUU is the program HTC uses to flash the OS to your device. It is not the OS. it sounds like you are not properly wiping the device before installing. Alos avoid any CWM recoveries. They are well known to be buggy and not the best option.
1. Use adb and fastboot to flash TWRP recovery
2. Format, system, data, cache and delvic cache
3. Flash the rom.
This will wipe all data on your device for apps and settings. So make sure you backup.
Click to expand...
Click to collapse
flashed twrp via fastboot, still having the same problem
clsA said:
are you doing all 3 steps ?
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
I see your on hboot 1.44 is your firmware still that old ?
post your fastboot getvar all and lets update your firmware
Click to expand...
Click to collapse
I was only doing the first step, will try the others
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *******************
(bootloader) imei: *********************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4223mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.136s
parthami said:
flashed twrp via fastboot, still having the same problem
I was only doing the first step, will try the others
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *******************
(bootloader) imei: *********************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4223mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.136s
Click to expand...
Click to collapse
not much help what was you CID and OS before you changed them ??
anyway this should work for you also
http://forum.xda-developers.com/showpost.php?p=57681938&postcount=4
HTC_001 and Paranoid Android
parthami said:
HTC_001 and Paranoid Android
Click to expand...
Click to collapse
yeah do the stuff i posted above
currently running the ruu
getting a error 170; usb connection
I think it might be to do with the phone as it is off with the charging animation but the text
"This build is for dev...." etc is also showing, which i have never seen before
Edit: reply failed again :/
EDIT 2 : Looks like ive got it to work with fastboot oem rebootRUU
EDIT 3: Nope,still have error 170, will keep trying
EDIT 4: When it get to checking headings, I get ERROR [171]: USB CONNECTION ERROR
Any help would be greatly appreciated, as I just have a paperweight now
never mind, going to re download to the RUU
parthami said:
currently running the ruu
getting a error 170; usb connection
I think it might be to do with the phone as it is off with the charging animation but the text
"This build is for dev...." etc is also showing, which i have never seen before
Edit: reply failed again :/
EDIT 2 : Looks like ive got it to work with fastboot oem rebootRUU
EDIT 3: Nope,still have error 170, will keep trying
EDIT 4: When it get to checking headings, I get ERROR [171]: USB CONNECTION ERROR
Any help would be greatly appreciated, as I just have a paperweight now
Click to expand...
Click to collapse
did you flash the firmware 1 and firmware 2 then the RUU ?
clsA said:
did you flash the firmware 1 and firmware 2 then the RUU ?
Click to expand...
Click to collapse
I'm pretty sure I had the wrong RUU, so I'm going to check and redownload it
parthami said:
I'm pretty sure I had the wrong RUU, so I'm going to check and redownload it
Click to expand...
Click to collapse
wrong RUU is not going to give you a USB Connection error ...a bad usb cable or a dirty port would
clsA said:
wrong RUU is not going to give you a USB Connection error ...a bad usb cable or a dirty port would
Click to expand...
Click to collapse
yeah thought I just mention it, I will clean out the ports and try again tomorrow, thanks for your help so far!
clsA said:
wrong RUU is not going to give you a USB Connection error ...a bad usb cable or a dirty port would
Click to expand...
Click to collapse
I have now tried 3 different ports, I cleaned the cable and flashed the firmwares again but I am still getting Error [171]: USB CONNECTION ERROR
Any ideas?
parthami said:
I have now tried 3 different ports, I cleaned the cable and flashed the firmwares again but I am still getting Error [171]: USB CONNECTION ERROR
Any ideas?
Click to expand...
Click to collapse
are you using windows 8 ? and are your drivers installed correctly ? Do you see My HTC in device manager
clsA said:
are you using windows 8 ? and are your drivers installed correctly ? Do you see My HTC in device manager
Click to expand...
Click to collapse
No, I am using Windows 7
Yeah, I installed HTC Sync so I should have all the drivers
Dont see My HTC since it is in bootloader mode
parthami said:
No, I am using Windows 7
Yeah, I installed HTC Sync so I should have all the drivers
Dont see My HTC since it is in bootloader mode
Click to expand...
Click to collapse
any driver installed when in the bootloader ?
clsA said:
any driver installed when in the bootloader ?
Click to expand...
Click to collapse
It just says Android 1.0 and HTC MTP Device Failed in driver installation
parthami said:
It just says Android 1.0 and HTC MTP Device Failed in driver installation
Click to expand...
Click to collapse
Here's what you should see in windows 7 with the phone in fastboot USB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.dropbox.com/s/fwt164s3udcix2d/Screenshot 2014-12-23 13.39.37.png?dl=0

[SOLVED] Can anyone help me fix my htc one m7?

I recently acquired an htc one m7. i decided it would be cool to root it and put a custom rom ( i have had experience in this i have done it on my s3 my galaxy tab 2.0 and a galaxy express) so i unlocked my bootloader, flashed a custom rom and rooted my device and i decided (stupidly) to erase everything from the device (System, data, internal storage, cache, and dalvik cache) but then i realized i didnt have the file on my phone and couldnt do anything with it so i started researching. i tried to gain s-off but with every solution i need to be booted up but i dont have an os so i cannot. i tried adb sideloading the file and it just errors. i tried pushing the file and flashing it and it errors. i tried fastboot flashing it but it wont verify it. i read on a forum on this site that said to flash roms with s-on you need to flash the boot image after. i tried this and it didnt work either. i also tried flashing the factory RUU with hasoon2000's all-in-one toolkit. this did not work. ive tried different recovery (but not different versions of these recoveries) everytime i try flashing a rom it errors and says it couldnt detect filesystem for /dev/block/plat then it cuts off and after it says mount: failed to mount /dev/block/platform/msn_ then it cuts off then it continues unmount of /system failed: no such volume (even tho in my file directory there defiantly is one) then it says patching system image unconditionally..... failed to open /dev/block/platform/msm_sdcc. 1/b E: error executing epdater binary in zip ' /sdcard then cuts off. i have no idea how to fix this sorry for such a long post please help me.
sethdrak3 said:
(...)erase everything from the device (System, data, internal storage, cache, and dalvik cache) but then i realized i didnt have the file on my phone and couldnt do anything with it so i started researching.
Click to expand...
Click to collapse
This is the most common situation here, no worries, it can be fixed easily.
i tried to gain s-off
Click to expand...
Click to collapse
Why? you don't need s-off to recover from this situation, unless you want to downgrade using a RUU or convert your phone to another variant... Re-flashing another custom rom doesn't require s-off
but with every solution i need to be booted up but i dont have an os so i cannot.
Click to expand...
Click to collapse
Right, you need a working rom to achieve s-off. But you don't need S-OFF to flash a rom...
i tried adb sideloading the file and it just errors. i tried pushing the file and flashing it and it errors.
Click to expand...
Click to collapse
What is the error exactly? What is your TWRP recovery version? What rom exactly?
i tried fastboot flashing it but it wont verify it.
Click to expand...
Click to collapse
You can't flash custom roms from fastboot, it must be flashed from custom recovery. The only things that can be flashed from fastboot are recovery, firmware and ruu + flashing a firwmare or a ruu will require to be booted in RUU mode, not in bootloader mode.
i read on a forum on this site that said to flash roms with s-on you need to flash the boot image after. i tried this and it didnt work either.
Click to expand...
Click to collapse
This is true for most of HTC devices but not for the M7. The boot partition is not secured (not protected by s-on) and is flashed automatically when flashing a rom from custom recovery.
i also tried flashing the factory RUU with hasoon2000's all-in-one toolkit.
Click to expand...
Click to collapse
Which RUU exactly (link please) + post the output of "fastboot getvar all" and finally don't use any toolkits, work directly from the command prompt using fastboot and adb commands. Toolkits are not the best when in this situation.
everytime i try flashing a rom it errors and says it couldnt detect filesystem for /dev/block/plat then it cuts off and after it says mount: failed to mount /dev/block/platform/msn_ then it cuts off then it continues unmount of /system failed: no such volume (even tho in my file directory there defiantly is one) then it says patching system image unconditionally..... failed to open /dev/block/platform/msm_sdcc. 1/b E: error executing epdater binary in zip ' /sdcard then cuts off. i have no idea how to fix this sorry for such a long post please help me.
Click to expand...
Click to collapse
This is the typical error of using an outdated recovery to flash a rom that require "block:by-name" support (e.g like trying to flash Cyanogenmod using twrp older than 2.7.x.x.) so again What is your recovery version and what rom and version is it?
alray said:
This is the most common situation here, no worries, it can be fixed easily.
Why? you don't need s-off to recover from this situation, unless you want to downgrade using a RUU or convert your phone to another variant... Re-flashing another custom rom doesn't require s-off
i thought i heard somewhere you needed s off to flash roms
Right, you need a working rom to achieve s-off. But you don't need S-OFF to flash a rom...
What is the error exactly? What is your TWRP recovery version? What rom exactly?
my twrp is v2.6.0.1 and im trying to flash cm12
You can't flash custom roms from fastboot, it must be flashed from custom recovery. The only things that can be flashed from fastboot are recovery, firmware and ruu + flashing a firwmare or a ruu will require to be booted in RUU mode, not in bootloader mode.
i understand this now i was trying ever possibility and how do you get to RUU mode?
This is true for most of HTC devices but not for the M7. The boot partition is not secured (not protected by s-on) and is flashed automatically when flashing a rom from custom recovery.
Which RUU exactly (link please) + post the output of "fastboot getvar all" and finally don't use any toolkits, work directly from the command prompt using fastboot and adb commands. Toolkits are not the best when in this situation.
i am not sure which RUU i did try the RUU.exe in fastboot mode like it said to do on the htc website and it did not work
This is the typical error of using an outdated recovery to flash a rom that require "block:by-name" support (e.g like trying to flash Cyanogenmod using twrp older than 2.7.x.x.) so again What is your recovery version and what rom and version is it?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35XW916185
(bootloader) imei: 354439055703575
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3664mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
output from command "fastboot getvar all"
@alray
thank you for all your help. btw the toolkit is very useful for small things like writing new recoveries it makes it easier plus sometimes its less problematic
Click to expand...
Click to collapse
sethdrak3 said:
i thought i heard somewhere you needed s off to flash roms
Click to expand...
Click to collapse
No, you only need an unlocked bootloader + custom recovery installed.
my twrp is v2.6.0.1 and im trying to flash cm12
Click to expand...
Click to collapse
TWRP 2.6.0.1 is really outdated. Latest official version is 2.8.6.0 or (2.8.6.4 unofficial) and since 2014-05-01 you need at least twrp 2.7.0.8 to flash Cyanogenmod
i understand this now i was trying ever possibility and how do you get to RUU mode?
Click to expand...
Click to collapse
Code:
fastboot oem rebootRUU
but it won't help flashing roms, only for signed RUU and Signed firmware same or newer version that match your CID, MID and base version( x.xx.502.x) so 3.17.502.3 or above
i am not sure which RUU i did try the RUU.exe in fastboot mode like it said to do on the htc website and it did not work
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) security: on
Click to expand...
Click to collapse
If you want to flash CM12, update your recovery.
You might want to read this, this and this
TWRP can be downloaded from here and here
thank you very much @alray i flashed a more recent twrp and it worked so thank you for all of your help. it was the toolkit that flashed an old version, so yes the toolkit was not useful in this instance because the files used for the recovery were outdated. they should update them. lol thank you.
sethdrak3 said:
thank you very much @alray i flashed a more recent twrp and it worked so thank you for all of your help. it was the toolkit that flashed an old version, so yes the toolkit was not useful in this instance because the files used for the recovery were outdated. they should update them. lol thank you.
Click to expand...
Click to collapse
you're welcome, that's one example why we are not suggesting to use any toolkits.
can you edit your title to "[SOLVED] Can anyone help me fix my htc one m7?" (go to your first post, click "edit" then click "go advanced" change your title and click "save changes) thanks

Categories

Resources