Related
So I picked up a screen protector on Amazon by ArmorSuit... it seemed to have solid reviews and I heard reports of great customer service, so I spent the 20 bones to pick one up. I just now applied it, and it went on well without a hitch. Since it was a wet protector and majority of my screen protector experience was with dry ones, I watched the YouTube video and also thoroughly read the instructions. Last thing I wanted to do was install a wet protector incorrectly and mess up my device.
Once done I checked out the finish. Despite the fact it's been 20 minutes and not 12-24 hours like they say to let it sit, I noticed lots of tiny scratches on it, which definitely looked like it was from the applicator card. What baffles me more is I have a microfiber cloth that came with the kit that I was wiping the screen off with... I noticed even swirly scratches after I was done, yet this microfiber cloth has nothing in it whatsoever!
Er, uh. Has anybody ran into anything like this with screen protector application?
Despite this, I'm still relatively happy with the screen protector as it fits perfectly and was very quick and easy to install. That being said, I'm still a little disappointed in what I'm seeing here, but I'd still trade hairline scratches that aren't that visibleat all (and not visible whatsoever with the screen lit up) versus air bubbles and dust pockets which clearly are visible regardless... which is almost always the case with dry protectors... Don't get me wrong, it's not like it's a series of key-gouging lines here, but when video installation guide shows the tilted tablet glaring off of the ceiling light to show it is 100% smooth and flush with a perfect glass-like surface, that's where I can see these very fine marks.
Maybe, just maybe, this is some sort of epic self-healing screen protector that'll remove those blemishes over the next day as it sits. :laugh: Yes, just maybe.
EDIT, er... uh... under the bulleted list of features I found these two items that I may have overlooked when I first purchased it:
Self-healing technology , Military grade material engineered for your specific device
ArmorSuit Lifetime Replacement Warranty *Made in the USA*
lol????
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
"burn marks" sounds about right
kpjimmy said:
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
Click to expand...
Click to collapse
I'm not sure how much more wet you can get a screen protector when it's already dripping, which was the status of it when I placed it on the screen. Likewise, I did wash my hands just prior and also had my hands both completely saturated in the provided fluid.
Burn marks sounds like some food for thought, but I'm unsure how you can get a burn mark from a microfiber cloth when I'm wiping the screen off in a circular motion. I mean, I didn't attach it to a circular sander or anything...
So in the event this magical self healing thing doesn't live up, what other screen protector would you guys recommend? I definitely want to go with a wet application, as I'm already able to tell a world of difference, but I'm a little dissatisfied with how incredibly sensitive this protector is to scratches. It's great you can take a dremel to it and it still protects the actual tablet screen but when a microfiber cloth scratches it I can't say it impresses me.
EDIT - Just got an email response from them minutes ago. The bulk of the message is pasted below:
Regarding the marks on your screen protector:
Any filmy marks, air bubbles, swirl marks or haze underneath the screen protector is due to the solution, which can take up to 2 weeks to go away. It typically doesn't take this long, but it will eventually go away because the material is designed to be breathable. This will release any trapped solution.
Regarding the scratches on your screen, here is a quick and easy fix.
1. Please turn off your device.
2. With your screen protector still on your device, spray 1 pump on the screen protector and then spread the solution evenly with the included microfiber cloth.
3. The scratches should then disappear soon, within a few days at the very most because the material is self-healing.
Click to expand...
Click to collapse
I guess I'll have to be a little more patient and see what happens.
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
slack04 said:
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
Click to expand...
Click to collapse
I thought the same thing, but once I realized that the microfiber cloth was giving swirl marks, that whole premise behind that idea kind of crumbled. If a microfiber cloth will legitimently give this screen protector swirl scratches from wiping it clean, then that's pretty fail.
That being said, I'm remaining quite optimistic about this "self healing" thing. Maybe I will see them slowly disappear? Who knows. It is a little more comforting knowing they have a lifetime guarantee, but we'll tackle that conversation when/if it ever becomes necessary. At any rate, I keep reminding myself - at least the screen protector still looks 1000% better than any dry screen protector AND it's protecting the screen in the process. :good:
cfn87 said:
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
Click to expand...
Click to collapse
I ordered the exact same 3-pack and I have to say they're great. Got it perfect on the first try and it looks crystal clear. It looks a lot better than those $10-$20 dollar protectors out there.
Sent from my Nexus 7 using xda premium
Hey all,
A little headsup I found an awesome screen protector. Thought I'd post it as theirs been an influx of "MASSIVE SCREEN SCRATCH" Threads.
This screen protector is military grade, does NOT scratch.
The only downside (could be an upside for some) is that it requires soapy water for install.
I have this screen protector and can not tell you how happy I am !!!
Check it out here
Once applied, all bubbles disappear within about 24 hours. Once its fully dried and bubbles are gone, its virtually invisible !!
It feels lovely to touch, you can feel it but its not a nasty feel like some of the other protectors. Almost the same sort of feel as an Xtreme Guard, but less rubbery !
If you want any more info feel free to ask.
Wilks3y.
Hi!
I'm planning to buy a screen protector and I might choose this one, can you tell me about how effective it is against fingerprints and smudges?
Well, I have a XtremeGuard screen protector which is also a soapy install screen protector and I must say it's nice. There are some major downsides like smudges and an orange-peel effect which happens if you don't install it correctly (also happens when you do install it correctly, but minor). The only way I can remove smudges off this thing is with water and a micro-fiber cloth which isn't something I carry around with me everywhere. That being said, dry screen protectors are the way too go. They can be cleaned easily (meaning smudges can be removed with your sleeve) and look better when the protector is installed on your device. I've gone through the Zagg Invisible Shield (the one OP posted), XtremeGuard's screen protector, and a normal screen protector and the dry one is the best in my opinion.
Pr3no said:
Hi!
I'm planning to buy a screen protector and I might choose this one, can you tell me about how effective it is against fingerprints and smudges?
Click to expand...
Click to collapse
Hey, it hardly shows any finger prints at all. I've cleaned it once since install (month or two ago) and that was just a wipe with my jumper sleeve. Much better than the others such as the XtremeGuard mentioned below.
Shmi117 said:
Well, I have a XtremeGuard screen protector which is also a soapy install screen protector and I must say it's nice. There are some major downsides like smudges and an orange-peel effect which happens if you don't install it correctly (also happens when you do install it correctly, but minor). The only way I can remove smudges off this thing is with water and a micro-fiber cloth which isn't something I carry around with me everywhere. That being said, dry screen protectors are the way too go. They can be cleaned easily (meaning smudges can be removed with your sleeve) and look better when the protector is installed on your device. I've gone through the Zagg Invisible Shield (the one OP posted), XtremeGuard's screen protector, and a normal screen protector and the dry one is the best in my opinion.
Click to expand...
Click to collapse
Hi, I also have an extreme guard on my HOX and I agree with your comment. However, and this will sound weird, try this:
Rub the finger prints in, with your finger. Untill they are really smudgy and horrible, then get your jumper sleeve and just wipe the smudge fairly hard. I'm telling you this works like a charm and gets rid of all finger prints !!
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Lol. There are like 10 screen protector threads here already !
Sent from my Galaxy Note8 using XDA Labs
Dejan Sathanas said:
Lol. There are like 10 screen protector threads here already !
Click to expand...
Click to collapse
But a lot of people are just looking for protection.... I am looking for more...
magichoward said:
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Click to expand...
Click to collapse
Feel your pain. I've done all what you have except for trying the glass ones.
Here is my experience. Get wet applied plastic one that is harder than the usual wet applied ones. A person on another thread recommend a Walmart Onn brand , I used it and it didn't leave S Pen marks at all. However, it was a ***** to fit correctly, so I being OCD I removed it and went back to the usual wet applied one again that does leave S Pen marks.
I believe Tech21 makes a screen protector similar in characteristics as the Walmart ONN one . Ain't tried that yet. But I can tell you that if the the Walmart ONN screen protector was applied correctly then I'd still be a fan.
Sent from my SM-N950U using Tapatalk
magichoward said:
But a lot of people are just looking for protection.... I am looking for more...
Click to expand...
Click to collapse
So your criteria would be: best protection available without fingerprints, reflections, or s-pen marks? Might be tough without compromising a bit on one of those aspects. I've tried 2 cheap glass ones that I took off immediately, the Spigen film protectors that leave s-pen marks, and the Whitestone Dome which which was best for me of the bunch (no s-pen marks of course, and no fingerprint issues so far. Haven't paid attention to reflection issues as of yet). The new Zagg glass looks promising too...ymmv
I like Skinomi. You get some s pen marks but they go away overnight. I use the spen alot too, it's my preferred way to interact with the screen.
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
corwin_amber said:
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
Click to expand...
Click to collapse
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
magichoward said:
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
Click to expand...
Click to collapse
Beach and sand indeed is an issue. I do not live on the beach but was there last summer (S8+, no pen, easier situation) and was so glad to have a film protector on it.
Bite the bullet and get a Whitestone dome?
If I may offer an alternative suggestion? I did not even want to risk the screen protector lottery on this phone, so I took a different approach.
I have used a case with a built-in screen protector. I feel it gives me the best of both worlds; ultimate protection from drops and screen damage when out and about, and in a couple of seconds (when at home and the soft safety of my sofa), it can be out of its case and back to a slippery naked unblemished masterpiece.
https://www.amazon.co.uk/i-Blason-Galaxy-Note-Protection-Reduction/dp/B074W3WBVC/ref=sr_1_1?ie=UTF8&qid=1516792422&sr=8-1&keywords=i-blason+note+8
Cons:
Minor reduction in finger sensitivity at the edges.
Adds significant bulk, especially in width making one-handed use impractical
Screen protector picks up scratches after a few months
Wearing polarised sunglasses makes screen hard to see (rainbow effect)
Be certain inside of screen cover is clear of grit before fitting
Pros:
Zero reduction in S Pen sensitivity.
Phone is tank-like. Has survived drops onto solid concrete no problem.
Screen protector can be popped out and used just as case if desired.
Dust caps for charging and headphone sockets
Easy to take off and have naked phone
It all balances out IMO. It might not be a perfect solution, but it is mine and I am happy with it.
I would advise against it, especially in a sandy environment. It WILL find a way in and then have a party with your screen. Also, in my personal opinion, this is way too bulky.
Personally, I am using a pitaka case. I am also having a thin, blank film on the back because ofscrarch protecting the back.
i'm using the official one for S8+ and it's very good, the s-pen does not leave any mark
I have used all types and found my favorite to be the tech21. No sensitivity issues, screen is clear, no spen marks, and decent with dealing with fingerprints. I couldn't use another after using this one.
Wouldn't it be just nice if Samsung offered a factory glass screen protector as an option when buying these devices. I'm sure they are aware of customers concerns - surely they have the technology to be able to do this, albeit probably not financially viable hence no go.
Sent from my SM-N950U using Tapatalk
I am using the screen protector that came with the phone but I am worried that it might not be that good to rely on.
I am not taking about dropping the phone or something. All am I caring about is scratches from the pen or stuff in my pocket. Can this screen protector help against these or it is useless?
The reason I kept it, because it fit so well and it does not affect the screen quality.
Obviously experience may vary quite a bit due to different conditions. For me so far the stock protector works quite well and protects the screen from scratches.
But as I like the "Glass feeling" a bit more I'll fit a tempered glass protector sometime in the future....
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Khalid Madkour said:
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Click to expand...
Click to collapse
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
MasterThiefGarrett said:
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
Click to expand...
Click to collapse
Spending 70~100 USD to protect 1200$ is worth it but the problem these kind of screen protectors can not be found in Egypt I think so until I find a way to get them without paying much taxes and fees I will stick with the default S.protector
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
I had problems with the finger reader. He caught the fourth, fifth time. (I added the same one a couple of times and it didn't help.) Today I took off the factory foil and magic. The reader catches off the shot every time!
NippleSauce said:
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
Click to expand...
Click to collapse
I tried a cheap UV-based tempered glass (10 euros) and on my Note 10 it works flawless every time.
And since the S21 series has a much bigger sensor I expect it to work fine as well, I know Whitestone Dome works fine, AND the AmFilm one too.
I used Note 8 for 3 years without screen protector and had maybe 1 micro scratch that was only visible when screen off. Now still using S21U with pre installed screen protector but the feeling of it is not so good, very rubbery especially if fingers are wet. Debetaing to take it of because I have some problems with fingerprint reader too, it's not bad but sometimes it's not detecting the finger.
Make sure your case has a lip guard. That has always worked for me.
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
A case with enough lip protection is good enough.
Thank you for sharing you experience. I decided to stay with the factory screen protector. It really love it as it fits the screen so well and is clear as if there was no screen protector.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
nixnixnixnix4 said:
A case with enough lip protection is good enough.
Click to expand...
Click to collapse
Yes. For most purposes, I agree with you that it's enough. I used to think so too... Never used a screen protector on any of my phones. Tried the tempered glass one on my last phone but felt it was too thick and reflective, so there is away and went with a naked screen. The experience was amazing, interfacing with the screen without any barriers. At least until I got two mysterious scratches on my OnePlus 6 screen, about 2 months apart, one after the other. Never dropped the phone, didn't put it face down, just used it normally. Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Second day I had my Note 10+ it faceplanted on a rough piece of 1/8" thick aluminum angle from pocket height. The metal hit the curve portion of the screen. Oh Yeah... isn't that special?
The case soaked up some of the impact but the factory screen protect was hit and savaged.
It protected the screen, zero damage. gulp.
Been using wet apply Gorilla IQ Sheild after trying a bunch of products including Whitestone.
After 9 months it's still on and while it's due to be replaced it's held up amazing well for $5 a pop.
Unlike the other junk, it's easy to apply and line up properly
I use the Zizo Bolt case to provide to majority of the protection. Raised screen guards on all sides are needed as I learned earlier
After 1.5 years, zero damage.
enigmaamit said:
Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Click to expand...
Click to collapse
Sand will do it every time. I tried the same experiment over 2 years ago with the same results. I always use a good case and screen protector because permanent scratches pi$$ me off.
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
nixnixnixnix4 said:
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
Click to expand...
Click to collapse
And very effective when using a good case.
BDU upper pant leg cargo pockets are great for smartphones...just make sure to keep the rear facing button, buttoned or your will lose it
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Thorgoth said:
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Click to expand...
Click to collapse
I removed it because i really felt the rims when using the gestures from the sides and bottom.
Didn't notice more brightness.
I haven't removed the screen protector yet, the screen must be really hard I damaged the screen protector the first day.
I put my phone in my pocket whilst removing an ATM (legally) and it's just wrinkled the edge , with no damage to the screen at all!
The only screen protectors I've been tempted to get are on eBay and they are tempered glass privacy ones from China to the UK.
I'll update what they are like.
I removed it because i really felt the rims when using the gestures from the sides and bottom.
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
I never managed to have a perfect screen protector. You ALWAYS feel the sides of the screen protector when you slide your finger over it (for example to slide from the curved side or from the top to open the notifications). Apparently I'm overly sensitive for that
lorenzo.pierini said:
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
Click to expand...
Click to collapse
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
khoaitaychienvn said:
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
Click to expand...
Click to collapse
Why are u afraid of? Its like a screen protector but more flexible/gummy. Water is used to apply it on the screen.
don't use screen protectors at all they make you screen get worse but IF YOU NEED ONE hydro gel are weak af and don't do jack **** to protect you phone but make the screen look less worse than temped tempered are the opposite more strong but less visability
The case is the display's primary protection*.
It should be slightly raised on the edge above the display and more so on the top/bottom.
I prefer using a wet apply urethane screen protector as the are easy to place, long lasting and inexpensive.
In 2 years of using the Zizo Bolt case and Gorilla IQ Sheild on my Note 10+ there's been zero damage to the phone in spite of a lot of drop onto concrete. Try as you may, eventually they take the plunge... a good case will save them almost everytime at heights of 2-5 feet onto concrete.
*the screen protector's primary role is protection from sand scratches and then marring protection when dropped. A tempered screen may seem strong but it can directly transfer the force of an impact to the display and break it.
Glass is a witchy substance that sometimes seems to defy the laws of physics. Ask any glazier.
Some of the laws of hydraulics apply to glass. Stress on one point may be transposed to another portion of the panel. If a spot is already under stress or has been stressed, it can fracture with only a small insult.
clockwork.satan said:
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
Click to expand...
Click to collapse
I found some decent ones on MediaDevil here in the UK much better than the standard one!
maxellxl said:
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Click to expand...
Click to collapse
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
The easiest way to avoid dust ("ivisible" one as well) on screen is to go to the bathrom and turn on warm water under the shower/in the bathtub and leave it for 15 min with closed door and window (if you have it). Then go to the bathroom with your phone and apply the screen protector. I can guarantee there will be no dust under.
Well if you need a clear screen protector then you can try gadgetshieldz screen protector. I'm using it on my Find X3 Pro for 3 months now and there are no bubble issues and this goes well with a curved screen.