Database Develop

ClockWorkMod 6.0.x for Samsung Galaxy Mini 2

Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Key layout:
Select: power button ( as of 05/05/2013 build 3 - also home button can be used )
Up/Down: volume up/volume down buttons
Back: back button
* How to flash:
Flash via odin3 in PDA column or with CWM recovery (only latest builds)
* Where to download:
Click here!
20/07/2013
* Fixed font issue
* Updated to support encryption (you need to format /data with this recovery to enable it)
23/11/2013
* updated to version 6.0.4.5
* use RGBX 8888 format
* Fixed backup/restore of .android_secure
* Support for Android 4.4
Special thanks to FrOz3n for helping me with testing initial builds!
XDA:DevDB Information
ClockWorkMod 6.0.x for Samsung Galaxy Mini 2, a Tool/Utility for the Samsung Galaxy Mini
Contributors
TheWhisp, CWM team
Version Information
Status: Stable
Current Stable Version: 6.0.3.3-b2
Stable Release Date: 2013-07-20
Current Beta Version: 6.0.4.5
Beta Release Date: 2013-11-23
Created 2013-10-11
Last Updated 2013-11-23

TheWhisp said:
Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Progress:
Almost everything works, it needs some minor changes. Release very soon.
* Notice:
Key layout is a little different than in CWM5, so don't freak out.
* How to flash:
Flash via odin v1.85 in PDA column.
Special thanks to FrOz3n for helping me with testing!
Click to expand...
Click to collapse
All of the thanks goes to you, our beloved developer

Re: [DEV] ClockWorkMod 6 - coming soon
thanks for you two
keep it up
Sent from my GT-S6500D using xda premium

What benefif from cwm6

Google CWM6 changelog.. mostly super fast backup/restore

TheWhisp said:
Google CWM6 changelog.. mostly super fast backup/restore
Click to expand...
Click to collapse
And faster installing ROM, I've flashed CM10 in hmmm 20 sec ?! idk but faster than with CWM5. And it let you install zip via ADB(still untested) I'm going to test it now.
PS>
The recovery builder is now building version 6 of the recovery. The main changes are as follows:
Backups are much faster. 4-5x faster. (Bug fix due to excessive status updates of the UI and new backup technique)
Incremental backups are smaller. Way way smaller. Only 15-20MB each for each additional backup of a ROM. This is done using a new tool I wrote to dedupe the files between incremental backups to eliminate duplicates.
Read more at http://techie-buzz.com/android/cwm-...ler-nandroid-backups.html#6K7Mss6UKbjEK3lO.99
Click to expand...
Click to collapse

Re: [DEV] ClockWorkMod 6 - coming soon
awesome
Sent from my GT-S6500D using xda premium

Ynt: [DEV] ClockWorkMod 6 - coming soon
Thats good. Especially taking nandroid backups are taking ages to complete or restore.. thanks for everything.
GT-S6500 cihazımdan Tapatalk 2 ile gönderildi

Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.

midzan21 said:
Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.
Click to expand...
Click to collapse
Why touch !? In my opinion that would bring you only fail menu touches so its a no from me for the touch verzion..

Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english

rianrazan said:
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english
Click to expand...
Click to collapse
Haven't run into it yet.
For the installation over sideload, I confirm IT WORKS. Thank you TheWhisp
You just setup the android SDK, install ADB tools, download your favourite ROM (currently mine is CM10 xD) and install it over ADB.
What does Install update via sideload do?!
You don't have to put your rom or flashing .zip file in your phone or SD card.
If you have it in your downloads folder (in linux) you just connect your phone to sideload on CWM6 and write in terminal (on your PC)
"adb sideload <.zip_file_path>" and you have it
Example. You have update.zip file in your downloads folder, so you write
adb sideload ~/Downloads/update.zip
So yah, i tried it, and as I said, it works falwlessly
PS. There are like NO bugs so I think this is going to be released tomorrow or so. Let's see what TheWhisp thinks

Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.

bhree said:
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.
Click to expand...
Click to collapse
It's compatible with all .zip files I have tried yet. It doesn't matter which zip file you try, it should work as long as the zip file worked in the previous CWM5.

cant wait for it...now its free from cwm loop .

Great news!!!! I'm very happy! Fast backup and fast restore!!! Ohh yeah! Thanks Whisp!

our beloved dev thewhisp really makes the Galaxy Mini 2 alive..
CM10+CWM really good.

and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/

TheWhisp said:
and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/
Click to expand...
Click to collapse
don't ever help 'em anymore sir
people like 'em never learned a lesson ..

It kind of feels sad when you do something in your free time and someone just takes your work and say it's his. Anyway, release in an hour.

[RECOVERY] CWM Recovery 6.0.4.5 | MoltenMotherBoard

FEEL FREE TO DONATE US FOR ALL WE'RE DOING FOR YOU!
For general discussions, bug reports and FAQ, write HERE!​
Credits:
MoltenMotherBoard team!
Downloads:
CWM Recovery | Code.Google
Full sources:
MoltenMotherBoard sources: MoltenMotherBoard | Github
CyanogenMod sources: CyanogenMod | Github
Kernel: lge-kernel-p880 | Github
Changelog:
20131126
Associated to Power Button the action SELECT_ITEM
From 6.0.4.4 to 6.0.4.5
Code updates from CyanogenMod, Google
20131120
First release
Issues:
Do you want to report an issue? Do it here!
In order to do it, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue.
Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different
kernel, mod, plugins and dependencies we didn't tell to use).
General Questions: MoltenMotherBoard Projects | General Questions and Info
Official Mantainer(s): Mackief, ItachiSama, p4c0

Installation guide:
[Method 1° ~ fastboot]
Code:
$ adb reboot oem-unlock
$ fastboot flash recovery /PATH-TO-THE-IMG-FOLDER-ON-YOUR-COMPUTER/cwm.img
$ fastboot reboot
[Method 2° ~ adb] (put the recovery.img in your sdcard)
Code:
$ adb shell
$ su
# cat /sdcard/cwm.img > /dev/block/mmcblk0p1
# sync
# exit
$ exit

With CyanDelta work?

negativman said:
With CyanDelta work?
Click to expand...
Click to collapse
Obviously it does. In fact, CyanDelta only make a flashable package, that you have to install manually from recovery. Then, yep.
BTW, now want also to make for you a Touch version of this CWM.

mackief said:
Obviously it does. In fact, CyanDelta only make a flashable package, that you have to install manually from recovery. Then, yep.
BTW, now want also to make for you a Touch version of this CWM.
Click to expand...
Click to collapse
cyandelta installs the zip automatically too, if the recovery supports openrecovery script. TWPR does, and so does the CWM based recovery in CM sources. the original CWM from rom manager does not work properly AFAIK

gandhar said:
cyandelta installs the zip automatically too, if the recovery supports openrecovery script. TWPR does, and so does the CWM based recovery in CM sources. the original CWM from rom manager does not work properly AFAIK
Click to expand...
Click to collapse
It could be that CWM from Rom-Manager is out-to-date.
The only way it could not work, is because thi updated CWM still need some merging and commits by the team. Just try and let us know!

mackief said:
It could be that CWM from Rom-Manager is out-to-date.
The only way it could not work, is because thi updated CWM still need some merging and commits by the team. Just try and let us know!
Click to expand...
Click to collapse
i had last tried a long time back, don't know and don't care about the current condition
i like TWRP much more.
just saw your post on g+ about a ubuntu touch port, any progress on that? i am very interested in that.

mackief said:
Obviously it does. In fact, CyanDelta only make a flashable package, that you have to install manually from recovery. Then, yep.
BTW, now want also to make for you a Touch version of this CWM.
Click to expand...
Click to collapse
Will another Nightly today or tomorrow, check whether a set CyanDelta!
Oh yes, the touch recovery - it would be very great. TWRP I personally do not like it. And the one that I have now for our smartphone is locked Rom Manager!

gandhar said:
i had last tried a long time back, don't know and don't care about the current condition
i like TWRP much more.
just saw your post on g+ about a ubuntu touch port, any progress on that? i am very interested in that.
Click to expand...
Click to collapse
About Ubuntu, it's not that simple.
It seems 4X kernel from CM team does not load into the system.
Unfortunately, I cannot debug which is the problem surely: but I'm sure I'll return on it in a week at least. I've some thoughts about how to make it loading and booting next to the kernel!
negativman said:
Will another Nightly today or tomorrow, check whether a set CyanDelta!
Oh yes, the touch recovery - it would be very great. TWRP I personally do not like it. And the one that I have now for our smartphone is locked Rom Manager!
Click to expand...
Click to collapse
As I understood CWM Touch is buildable only through clockworkmod-builder, and I'll do it. The only problem is that in that site, the sources are out-to-date, linked to 4.3 branches.
So, we have to wait, till CWM will update the sources linked in the site to build a 6.0.4.4 touch recovery.

mackief said:
As I understood CWM Touch is buildable only through clockworkmod-builder, and I'll do it. The only problem is that in that site, the sources are out-to-date, linked to 4.3 branches.
So, we have to wait, till CWM will update the sources linked in the site to build a 6.0.4.4 touch recovery.
Click to expand...
Click to collapse
Do not quite understand! Surely there's a new CWM 6.0.4.4. You can unlock it from Rom Manager? http://forum.xda-developers.com/showthread.php?t=2523732

Hey.
Just built a new build of CWM, now coded 6.0.4.5.
In this new release, CM team has apported an important fix - as also TWRP team has done - that avoid any issue while flashing some of KitKat based roms.
BTW, made a test build of CM11, gonna test it

mackief said:
Hey.
Just built a new build of CWM, now coded 6.0.4.5.
In this new release, CM team has apported an important fix - as also TWRP team has done - that avoid any issue while flashing some of KitKat based roms.
BTW, made a test build of CM11, gonna test it
Click to expand...
Click to collapse
Feel free to take us alpha testers
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

[email protected] said:
Feel free to take us alpha testers
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just pulled a log, as it does not boot.
Having some issues related to gralloc. Need to debug!

mackief said:
[...]
So, we have to wait, till CWM will update the sources linked in the site to build a 6.0.4.4 touch recovery.
Click to expand...
Click to collapse
Just take a look at my sig we already have 6.0.4.4 touch

laufersteppenwolf said:
Just take a look at my sig we already have 6.0.4.4 touch
Click to expand...
Click to collapse
Oh, marvolous!
But how can I build it? Is it buildable from source?
If you don't want me to build it, just update your port to 6.0.4.5. Ty, dude!

laufersteppenwolf said:
Just take a look at my sig we already have 6.0.4.4 touch
Click to expand...
Click to collapse
When he unlocked from Rom Manager?

mackief said:
Oh, marvolous!
But how can I build it? Is it buildable from source?
If you don't want me to build it, just update your port to 6.0.4.5. Ty, dude!
Click to expand...
Click to collapse
I will update it ASAP
negativman said:
When he unlocked from Rom Manager?
Click to expand...
Click to collapse
Not at all, as only official device maintainers can. And as I am not a maintainer, I can't

Just released new build of CWM.
Changelog:
Associated to Power Button the action SELECT_ITEM
From 6.0.4.4 to 6.0.4.5
Code updates from CyanogenMod, Google
Follow us on Google+, Facebook & Twitter!
Cheers.

We recently changed our Issue Tracker URL.
If you want to report a bug, please, follow the new instructions:
· Issue Tracker URL: Issues | Github
· Important notes: go to the linked URL, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue. Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different kernel, mod, plugins and dependencies we didn't tell to use).

Development for this project has been totally and officially stopped, as no more needed.
Greetings,
MoltenMotherBoard team.

TWRP 3.0.2 FOTA-kernel Unofficial

Unofficial TWRP FOTA-kernel image for SGP611/612 & for SGP621
XDA:DevDB Information
TWRP 3.0.2 FOTA-kernel [UPD: 10.04.2016], Kernel for the Sony Xperia Z3 Tablet Compact
Contributors
nos1609
Source Code: https://github.com/TeamWin/android_device_sony_scorpion_windy
Kernel Special Features: FOTA
Version Information
Status: Stable
Current Stable Version: 3.0.0
Stable Release Date: 2016-03-25
Created 2016-03-25
Last Updated 2016-04-10

There is the download link? Can't find it.

da900 said:
There is the download link? Can't find it.
Click to expand...
Click to collapse
See the tab "downloads" and be ready to feel stupid (it happen to me)

dnnz said:
See the tab "downloads" and be ready to feel stupid (it happen to me)
Click to expand...
Click to collapse
Thanx. Finally I have found it.

The TWRP doesn't work
It didn't work on my SPG 621 when i replaced the cm recovery.Pressing power button and the device stayed black screen always

hot12232s said:
It didn't work on my SPG 621 when i replaced the cm recovery.Pressing power button and the device stayed black screen always
Click to expand...
Click to collapse
Sorry, but there is something wrong with your setup. Personnally checked on SGP621 & 611 and it enters recovery successfully with cm12.1 and even cm13.
Have you flashed it with fastboot flash boot? Cause the symptoms are similar to this. If so, it won't boot. I think You might have to reflash by following the instructions in the OP.
It's not a standalone kernek, It's a FOTA one. It has to be booted by a firmware kernel by loading FOTA ramdisk.

dnnz said:
See the tab "downloads" and be ready to feel stupid (it happen to me)
Click to expand...
Click to collapse
That's not visible in Tapatalk. I don't feel stupid.
Gesendet von meinem SGP611 mit Tapatalk

could you also build for the new TWRP 3.0.2.0 ?

TWRP 3.0.2 Updated
Slightly mofified the ramdisk to enable TA and FOTA partition manipulations, but didn't get them displaying for now.

I am on stock rom 5.1.1. Using dual recovery 2.8.25.
Can i flash the img file with flashtool and then it will replace my old recovery?
Just to make sure.... scorpion_Windy is for wifi version and scorpion is for lte, is that right?
Will this recovery work if i flash it with flashtool after upgrading to android 6.0?
Anyone know how to root android 6.0?
Thanks in advance
Torben5247

nos1609 said:
You might have to reflash by following the instructions in the OP.
Click to expand...
Click to collapse
Which instructions?

I can say it wont really work with the 4.4 original rom. You have to be on 5 at least.

[twrp] team win recovery project 3.0.2.0

TWRP 3.0.2-0 is out now for all currently supported devices.
What’s new in 3.0.2-0:
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
TWRP 3.0.2.0 for sprout4 (Tested on Karbonn Sparkle V)
Download link: https://drive.google.com/file/d/0By0nqyW_a9Bsbm1lWGwzcHk0Tk0/view?usp=sharing
Mirror link: https://mega.nz/#!BZVz0RRA!zL96iTDs1mrNAx5epoi9xNt1HIOU2b1PbVRHKPsQpn8

hello, will this work with sprout 8 too?

johngare said:
hello, will this work with sprout 8 too?
Click to expand...
Click to collapse
I tested on only on sprout4 (Karbonn Sparkle V). If they work on same kernel, it should boot up, otherwise it won't.

Marius (TMT) said:
I tested on only on sprout4 (Karbonn Sparkle V). If they work on same kernel, it should boot up, otherwise it won't.
Click to expand...
Click to collapse
I am looking for a tester for my builds of the recovery (TWRP says they need a new maintainer for sprout). Anyone on board?

MSF Jarvis said:
I am looking for a tester for my builds of the recovery (TWRP says they need a new maintainer for sprout). Anyone on board?
Click to expand...
Click to collapse
Count me in.

KcLKcL said:
Count me in.
Click to expand...
Click to collapse
Counted. Stay tuned.

Thanks for update. Working great on my canvas A1.

rajputmiles said:
Thanks for update. Working great on my canvas A1.
Click to expand...
Click to collapse
KcLKcL said:
Count me in.
Click to expand...
Click to collapse
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis

MSF Jarvis said:
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis
Click to expand...
Click to collapse
Downloading... Will report tomorrow.
Edit: sorry didn't know you have to submit reports today.

rajputmiles said:
Downloading... Will report tomorrow.
Click to expand...
Click to collapse
TOMORROW!! Oh, Come on, I've got to submit the device tree to @Dees_Troy tonight to get it official.

MSF Jarvis said:
TOMORROW!! Oh, Come on, I've got to submit the device tree to @Dees_Troy tonight to get it official.
Click to expand...
Click to collapse
Okay report within 3 hours

rajputmiles said:
Okay 3 hours.
Click to expand...
Click to collapse
It's just a recovery! Make a backup, restore it, Flash a ROM and then say it works. Actually, if it boots up, I can assume it will work completely. At least help me with that. It's for YOUR benefit. I don't even have the device!

MSF Jarvis said:
It's just a recovery! Make a backup, restore it, Flash a ROM and then say it works. Actually, if it boots up, I can assume it will work completely. At least help me with that. It's for YOUR benefit. I don't even have the device!
Click to expand...
Click to collapse
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.

MSF Jarvis said:
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis
Click to expand...
Click to collapse
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.

rajputmiles said:
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.
Click to expand...
Click to collapse
Marius (TMT) said:
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.
Click to expand...
Click to collapse
So apparently @varun.chitre15's ThunderZap kernel doesn't like being used for TWRP. I'll try with AOSP source.
---------- Post added at 11:16 PM ---------- Previous post was at 10:35 PM ----------
rajputmiles said:
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.
Click to expand...
Click to collapse
Marius (TMT) said:
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.
Click to expand...
Click to collapse
Another test build.
:fingers-crossed:

MSF Jarvis said:
So apparently @varun.chitre15's ThunderZap kernel doesn't like being used for TWRP. I'll try with AOSP source.
---------- Post added at 11:16 PM ---------- Previous post was at 10:35 PM ----------
Another test build.
:fingers-crossed:
Click to expand...
Click to collapse
Still no luck. Same problem. Not booting up.

rajputmiles said:
Still no luck. Same problem. Not booting up.
Click to expand...
Click to collapse
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks

MSF Jarvis said:
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks
Click to expand...
Click to collapse
Nope. It does not seems to boot up. Only black screen, then it reboots in android os.

MSF Jarvis said:
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks
Click to expand...
Click to collapse
Still same. Recovery not booting up.
Black screen for 2 second-->> reboots into rom.
One more thing what is meant by "ThunderZap kernel doesn't like being used for TWRP". Cause cyanogen mod kernel is coming with cm snapshot release 1.

rajputmiles said:
Still same. Recovery not booting up.
Black screen for 2 second-->> reboots into rom.
One more thing what is meant by "ThunderZap kernel doesn't like being used for TWRP". Cause cyanogen mod kernel is coming with cm snapshot release 1.
Click to expand...
Click to collapse
Recovery is just a ramdisk put together with a kernel zImage. I used TZ5.2 zImage first time.
Your recovery boots, right? I'll try with your zImage, though would you mind telling me which zImage are you using ?

[RECOVERY][T813] TWRP 3.3.0-0 Touch Recovery [OFFICIAL]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD: https://dl.twrp.me/gts210vewifi
BUGS:
If you have found a bug, please consider posting it to our github issues log and then I'll report to Dess_Troy. If you have a significant problem that cannot be answered in this thread, your best bet is to PM Dees_Troy directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][T813] TWRP 3.3.0-0 Touch Recovery [OFFICIAL], ROM for the Samsung Galaxy Tab S2
Contributors
LuK1337, luca020400, Olivier
Source Code: https://github.com/TeamWin
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-01-24
Last Updated 2019-04-15

Wonderful to see this official! Just great!

Flashed!!
It works nicely and looks very good!
Thanks for this beautiful present

link dont work....pls reup...thy

hasbai said:
link dont work....pls reup...thy
Click to expand...
Click to collapse
Is it good now?

yes...the link works...can u make to a TWRP flash mod?

hasbai said:
yes...the link works...can u make to a TWRP flash mod?
Click to expand...
Click to collapse
Flash mod?
Can't you just flash it with heimdall?

sry...i mean twrp zip

hasbai said:
sry...i mean twrp zip
Click to expand...
Click to collapse
Use heimdall or flash the image in twrp ( there's a switch on the bottom I think ).

Hi,
Thanx a lot to bring some love to our Value Edtion :good::fingers-crossed:

Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???

pastorbob62 said:
Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???
Click to expand...
Click to collapse
Yes, that's the codename of it.

Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe

New twrp!!! Flashing it now!!!

varben said:
Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe
Click to expand...
Click to collapse
>Brightness level doesn't work. It's always max.
I forgot to fix that yesterday, I'll get that sorted out today ~ https://gerrit.twrp.me/#/c/2078

hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now

varben said:
hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now
Click to expand...
Click to collapse
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...

LuK1337 said:
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...
Click to expand...
Click to collapse
So, if I reflash the rom now without wipes, will it be ok to reboot to system?

varben said:
So, if I reflash the rom now without wipes, will it be ok to reboot to system?
Click to expand...
Click to collapse
Yes.

So, for the moment, who wants to flash this needs to use the official twrp app from play store.
https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en
Edit: @LuK1337 is so fast!!! A new fixed TWRP now! Forget the above...