Related
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Sony Xperia T (mint)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For stock rom:
http://forum.xda-developers.com/showthread.php?t=2657190
Click to expand...
Click to collapse
XDA:DevDB Information
[mint][CWM Advanced Edition] PhilZ Touch, a Tool/Utility for the Sony Xperia T
Contributors
Phil3759, DooMLoRD, [NUT]
Version Information
Status: Stable
Created 2014-03-29
Last Updated 2014-03-29
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
This rules that this has been ported, as I use the PhilzTouch on my Galaxy Tab2. I even donated a few $$ to him!
One question, with the shared kernel "feature" of the T, how did you avoid having it revert back to stock CWMrecovery anytime one flashes a new ROM?
Regardless, I'll try this out tonight.
Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?
hhamzah49 said:
Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?
Click to expand...
Click to collapse
It will be repacked into other kernels later...
Sent from my C6902 using xda app-developers app
So how do I go about installing this?
Is it as simple as boot the "T" into flashboot mode and running
fastboot -i 0xfce flash boot philz_touch_6.09.3-mint.img
But I'd rather not blow away my phone if this is wrong.
Can I use this for the xperia V, too ?
alex m. said:
Can I use this for the xperia V, too ?
Click to expand...
Click to collapse
No
Sent from my LT30p using Tapatalk
Is there a trick to using PhilzTouch on the T to avoid the shared kernel?
I installed it via "flashboot boot philz.img" and at first glance, it seems to work the same as on my Galaxy Tab 2.
But then it turns out that its not really useable.
a) I was unable to boot back into my normal ROM. Rebooting always brought it back to PhilzTouch.
b) Even if I could have found a way to boot my phone, it turns out that PhilzTouch recovery was overwritten by the stock recovery as soon as I installed a newer CM nightly which I tend to do nightly.
hi all
can i use for TX ? do i need UL or not ? thanks
How to install this recovery?
fastboot flash boot boot.img gives me each time a reboot in recovery
fastboot flash recovery boot.img gives me an error.
Anyone got this working?
Sent from my Xperia T using xda app-developers app
Thanks alot! Used it to get root on the new 4.3 update:good::good:
silasje1 said:
Thanks alot! Used it to get root on the new 4.3 update:good::good:
Click to expand...
Click to collapse
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.
zilboris said:
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.
Click to expand...
Click to collapse
You need Unlocked Boatloader at first!
1. install the 4.3 rom (any you like). Flashing the FTF with everything included
2. Flash this CWM recovery and install SU zip
3. flash FTF and exclude all except KERNEL.
Done! (limited time to write so made it short)
@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?
[NUT] said:
@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?
Click to expand...
Click to collapse
I need video of this "extremely..."
Phil3759 said:
I need video of this "extremely..."
Click to expand...
Click to collapse
Hello, I send you video tomorrow
@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.
[NUT] said:
@steveboss where's the video?
Click to expand...
Click to collapse
I`am sorry, I don`t have any camera now, maybe at weekend
[NUT] said:
@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.
Click to expand...
Click to collapse
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path
Phil3759 said:
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path
Click to expand...
Click to collapse
ooh, that could be the trick :cyclops:
Thanks for the hint :good:
I'll update you once I know if it works or not.
Here is the latest TWRP (Team Win Recovery Project) for our phone.
It's only for the New Bootloader.
See "Downloads" for latest recoveries.
Changelog:
2015-02-13: TWRP 2.8.5.0
2014-11-30: TWRP 2.8.1.0
2014-09-05: F2FS support
2014-07-17: Firtecy kernel included
2014-06-25: first release (2.7.1.0)
XDA:DevDB Information
[RECOVERY] [newbl] TWRP touch recovery, Tool/Utility for the LG Optimus 2x
Contributors
DJNoXD
Source Code: https://github.com/p990-slimrom
Version Information
Status: Stable
Created 2014-09-05
Last Updated 2015-02-13
DJNoXD said:
Here is the latest TWRP (Team Win Recovery Project) for our phone.
It's only fo the New Bootloader.
Click to expand...
Click to collapse
Thanks, Buddy!
I will soon test this tool when I have available and then do the report.
:good::good:Thanks...Thanks!!...:good::good:
OK ... perfect installation and no errors!
TWRP v2.7.1.0 NewBootLoader working on my LG P990 ... Thanks
DJNoXD said:
Here is the latest TWRP (Team Win Recovery Project) for our phone.
It's only for the New Bootloader.
Click to expand...
Click to collapse
Thank you @DJNoXD for all the commitment and dedication to our phone. :good:
Best regards,
Hugo
Great job, is very helpful! :good:
Thanks
Awesome:good:
Thank you very much DJNoXD, working great :good:
I don't know if someone else have this, sometimes suddenly I'm losing the screen (only backlight). I don't if behind is still working but a battery off recover the phone. I'm using new BB.
doctoralex said:
I don't know if someone else have this, sometimes suddenly I'm losing the screen (only backlight). I don't if behind is still working but a battery off recover the phone. I'm using new BB.
Click to expand...
Click to collapse
it happened also to me one time
same problem that @doctoralex have... black screen :/
That issue is not related to the recovery.
I also have this problem, and I'm using another recovery
I've also had some blank black screen in recovery with the phone attached to the pc. I could manage the problem by entering the recovery without have the phone attached to the pc.
I think its a kernel related problem. So I will build a new version with the old kernel (non 3.1) soon.
DJNoXD said:
I think its a kernel related problem. So I will build a new version with the old kernel (non 3.1) soon.
Click to expand...
Click to collapse
New version with Firtecykernel is online.
Please try and tell me if it works better.
DJNoXD said:
New version with Firtecykernel is online.
Please try and tell me if it works better.
Click to expand...
Click to collapse
Thank You, "DJNoXD"...downloaded and installed!
No errors, perfect installation...continue testing!
...
Well, after some Restarts, Backups, Restores, Wipes, Mounts...I can say this TWRP work's fine and without errors, almost for me!
Thank You, "DJNoXD". ??
LG O2x[P990]@TapaTalkPro4.6.4
Can you share the twrp theme you use? Its nice mate..
Sent from my LG-P990 using XDA Free mobile app
mkchan said:
Can you share the twrp theme you use? Its nice mate..
Sent from my LG-P990 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using TWRP Manager (ROOT) from GOOGLE PLAY
recovery-TWRP-2.7.1.0-newbl-20140717.zip
Click to expand...
Click to collapse
is working perfect now
Is this a flashable zip through TWRP recovery or via computer?
sokinso said:
Is this a flashable zip through TWRP recovery or via computer?
Click to expand...
Click to collapse
Flashable zip through TWRP recovery!...
Hey this thread is for making an cm12 rom for xperia E1 And E1 Dual!
UPDATE:I CANNOT MANAGE TO GET THE BOOTLOOP ISSUE FIXED
LIKE OTHER DEVS SAID NO AOSP SUPPORT
Android 5 lolipop features
Less Ram Usage
Version with stock Xperia Apps from Xperia Z3
More Usages...
3g+!!
Adreno 302 Tweaks.......
Qualcomm MSM8210 Snapdragon 200 Tweaks.........
Not working:
GPS, Bluetooth, WiFi(Solved), Sound, Camera, Dial menu, Auto rotate, Lockscreen, Leds
Bravia Engine System Tweaks.....
Stuff E1 users need:
rooted hot-bootable kernel
working TA-partn backup so users can unlock bootloaders late in the game
once you unlocked: it is no going back! (no relock method proven yet!)
to flash in flash-mode (rather than fast boot mode) u need to unlock the bl
The Rom IS UPLOADED!
Installation Guide:
FIRST:
You need an unlocked bootloader, root, custom recovery already installed and PLEASE make a full backup using the recovery.
SECOND
0 - Download it and move it to SD CARD
1 - Go to TWRP(Custom Recovery)
2 - "Wipe and Format Options"
3 - "Clean to Install a New ROM"
4 - Install ZIP
5 - Chose zip from /storage/sdcard...
6 - Then chose "cm-12XPERIAE1.zip" and wait the installation, after installed reboot your device.
7 - DONE
*Remember that there are a lot of things don't working, so this is an alpha version. I hope on the future we will be able to get a stable rom.
Download: XDA:DevDB Information[/SIZE][/U][/B]
[E1][ROM]CM12 For XPERIA E1, ROM for the Sony Xperia E1
Contributors
[URL="http://forum.xda-developers.com/member.php?u=5885651"]Siokrismarios
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: XPeria E1
Based On: CYANOGEN MOD 12
Version Information
Status: Alpha
Current Stable Version: NO
Stable Release Date: 2015-08-12
Current Beta Version: 1.2.1
Beta Release Date: 2015-08-20
Created 2015-08-08
Last Updated 2015-12-17
Woah. How did you get it to work with KK kernel? I'm curious
(I'm ready for testing btw.)
Kizoky said:
Woah. How did you get it to work with KK kernel? I'm curious
(I'm ready for testing btw.)
Click to expand...
Click to collapse
happy to hear that unfortuntly i have some problems with mediafire
Siokrismarios said:
happy to hear that unfortuntly i ahve some problems with mediafire
Click to expand...
Click to collapse
Upload it to here then: https://mega.co.nz/
Also, If you need E1's Vendor it is here: https://github.com/CyanogenMod-E1/android_vendor_sony_e1/tree/cm-12.1/proprietary
Kizoky said:
Upload it to here then: https://mega.co.nz/
Also, If you need E1's Vendor it is here: https://github.com/CyanogenMod-E1/android_vendor_sony_e1/tree/cm-12.1/proprietary
Click to expand...
Click to collapse
Thank you!!!
WTF? It does not even boot up
Stuck at CM logo
Don't use Vendor files I mentioned here, it does not work
Does not work...?
Flashed it, everything seems to go nicely, then it does not boot. It's stuck on the boot animation. Did you even check before uploading it? Did it work for you?
xezrunner said:
Flashed it, everything seems to go nicely, then it does not boot. It's stuck on the boot animation. Did you even check before uploading it? Did it work for you?
Click to expand...
Click to collapse
Yeah it succsesfull booted in my xperiae1 please pm me with screenhots to short that out!
Siokrismarios said:
Yeah it succsesfull booted in my xperiae1 please pm me with screenhots to short that out!
Click to expand...
Click to collapse
Not sure If I did something wrong
I wiped my system, cache, dalvik, almost everything, and then flashed the ROM; and then I restarted my phone
Shortly after the Sony logo the CM logo showed up, but it is stuck and sometimes it is laggy
kmsg: postoffice_sendPackage, postoffice service hasn't ready re-sent at 5 secs later
This message is spammed
Kizoky said:
Not sure If I did something wrong
I wiped my system, cache, dalvik, almost everything, and then flashed the ROM; and then I restarted my phone
Shortly after the Sony logo the CM logo showed up, but it is stuck and sometimes it is laggy
kmsg: postoffice_sendPackage, postoffice service hasn't ready re-sent at 5 secs later
This message is spammed
Click to expand...
Click to collapse
Pm me
Any progress so far?
Kizoky said:
Any progress so far?
Click to expand...
Click to collapse
unfortunately no my head is stucked up!
Στάλθηκε από το D2005 μου χρησιμοποιώντας Tapatalk
Need my help?
I have this phone back from January.. actually purchased it for my mom!
But this is overloaded most of the times and now I have the device for myself!
Pm me if You need some sort of support!
kaustubh.rockstar said:
Need my help?
I have this phone back from January.. actually purchased it for my mom!
But this is overloaded most of the times and now I have the device for myself!
Pm me if You need some sort of support!
Click to expand...
Click to collapse
We all need your help my friend, Xperia e1 users have been waiting for a miracle in order to have at least a custom rom. What we really need is a super hero
Darkar18 said:
We all need your help my friend, Xperia e1 users have been waiting for a miracle in order to have at least a custom rom. What we really need is a super hero
Click to expand...
Click to collapse
A miracle that is not likely to happen
Is it based on ramdisk-hijack method?
SP users were starting like here- nothing was working...
Try to make CM 10.2 or 11, it's easier!
Helping Tutorial:http://forum.xda-developers.com/showthread.php?p=50396702#post50396702
MixoMaxoViper said:
Is it based on ramdisk-hijack method?
SP users were starting like here- nothing was working...
Try to make CM 10.2 or 11, it's easier!
Helping Tutorial:http://forum.xda-developers.com/showthread.php?p=50396702#post50396702
Click to expand...
Click to collapse
We can boot into CM11 without any problems
the Issue here is the non-working drivers (Sony OEM drivers from Stock ROM does not work)
Maybe there is a phone with same specs?
Look at Motorola Moto E(1st Gen.), same processor, and pure KitKat.
MixoMaxoViper said:
Maybe there is a phone with same specs?
Look at Motorola Moto E(1st Gen.), same processor, and pure KitKat.
Click to expand...
Click to collapse
Only graphics drivers working, Sound barely, Wi-Fi, Bluetooth, GPS is not working (the way E1 is works differently, or It has a GPS chipset that are not the same as in Motorola)
Ok, but how can I check the WIFI and Bluetooth driver/chip in phone?
And Is it possible to make it for LB later?
RECOVERY
TWRP & CM-Recovery
Z00A/Z008 ( LP Bootloader)
Just as the title says these are unofficial recovery builds for Asus Zenfone 2 Z00A and Z008 models
These have been tested and confirmed functional. These are built from current CM devices trees, CM kernel source. Source links provided below. If you find any bugs please report with an attached recovery log.
DOWNLOAD
Current Versions provided for both devices
TWRP 2.8.7.3 (LP based)
TWRP 2.8.7.7 (M based)
CM-Recovery 9-28-15 (LP based)
CM-Recovery 12-22-15 (M based)
{ Cm-Recovery doesn't use "version" tags so using build date as a version # }
SOURCES
Recovery built in a CM-12.1/13.0 environment respectively using device trees/kernel
from our CM device trees/kernel CM-zenfone2 github
Z00A LP Tree HERE
Z008 LP Tree HERE
Z00A M Tree HERE
Z008 M Tree HERE
Kernel Source
CM-Recovery source from CM-recovery
TWRP source tyipically from Omnirom
HOWEVER 2.8.7.6 beta uses modified TWRP source from omnirom (and patched from thier gerrit) from
HERE
Code:
Changelog:
1-22-16:
TWRP 2.8.7.7
- fixed OTG & external SDCARD mount
- from TWRP: language support, code cleanup and minor fixes(see twrp github for full list)
- this is pre-release testing main ly for soon to be released TWRP 3.0
12-22-15:
* updated builds
* should fix backups in TWRP
* should fix issues flashing newer ROMS after 12-17-15
12-7-15
* 2.8.7.5 TWRP builds
* fixed opengapps flashing
12-6-15
* split into new thread
* Marshmallow based recoveries now live
* TWRP is WIP prior to next major official tag, new theme included for testing
Z00A/Z008 ( MM Bootloader)
Just as the title says these are unofficial recovery builds for Asus Zenfone 2 Z00A and Z008 models
These have been tested and confirmed functional. These are built from current CM devices trees, CM kernel source. Source links provided below. If you find any bugs please report with an attached recovery log.
DOWNLOAD
Current Versions provided for both devices
TWRP 3.0.2-M1 (MM based)
SOURCES
Recovery built in a Omnirom-6.0 environment respectively using device trees/kernel below
Z00A/Z008 MM Tree HERE
Kernel Source HERE
TWRP source tyipically from Omnirom
Code:
Changelog:
Initial source built MM bootloader friendly based recovery release
Z00D
Just as the title says these are unnoficial recovery builds for the Asus Zenfone 2 Z00D (ze500cl) model
These have been tested and confirmed functional. These are built from experimental devices trees, modified Stock kernel source. Source links provided below. If you find any bugs please report with an attached recovery log.
DOWNLOAD
Current Versions provided for both devices
TWRP 3.0.2-0
SOURCES
Recovery built in a omnirom environment respectively using device trees/kernel
from our my github
Device Tree
Kernel Source
Code:
Changelog:
5-3-16: Initial TWRP build
XDA:DevDB Information
Zenfone2 Recovery, Tool/Utility for the Asus ZenFone 2
Contributors
jrior001, crpalmer
Source Code: https://github.com/CM-zenfone2
Version Information
Status: Beta
Beta Release Date: 2015-12-06
Created 2015-12-07
Last Updated 2016-08-03
Niceeeeeeeeeeeeeeeee
Well this was unexpected, thank you so much for this!
Edit: Well I tried the MM version, and I must say I love the new look! It's kinda laggy, but that's very expected and I got a recovery log.
Aceofzeroz said:
It's kinda laggy, but that's very expected and I got a recovery log.
Click to expand...
Click to collapse
TWRP still uses some really old code for pixelflinger. We have been using a JB era patch from Intel to add x86 optimized acceleration, which Dees_Troy(TWRP dev) and the zenfone5/6 devs ported to KK & LP. I updated it for M, but this is about as good as it gets until TWRP overhauls that section of their code. Without this patch is basically unusable.
And yes the new theme is sexy It's months in the making from TWRP contributer @z31s1g and it's quite lovely.
jrior001 said:
TWRP still uses some really old code for pixelflinger. We have been using a JB era patch from Intel to add x86 optimized acceleration, which Dees_Troy(TWRP dev) and the zenfone5/6 devs ported to KK & LP. I updated it for M, but this is about as good as it gets until TWRP overhauls that section of their code. Without this patch is basically unusable.
And yes the new theme is sexy It's months in the making from TWRP contributer @z31s1g and it's quite lovely.
Click to expand...
Click to collapse
Ah, I understand the situation now and glad that the patch worked out for the time being. Definitely better than not having the latest TWRP to play with, so my highest gratitude for the amazing work bringing up Marshmallow in time for the holidays! :thumbup:
Sent from the Ace's MB865 using Tapatalk
This is a bit wonky with device encryption. It'll boot the recovery without a theme loaded and ask for my pattern (as expected). I'll put that in and it'll decrypt and mount storage, then the "put in your pattern" prompt comes up again (this time, with my twrp theme loaded). I can cancel that prompt just fine and it'll sit on the main screen and I can proceed from there, so it's not a showstopper at least.
This didn't happen on 2.8.7.3.
edit: on flashing opengapps 6.0 micro, I'm warned that the recovery is missing the xz binary and can't flash the zip (and told me to update to the latest recovery for my device, lol). I'll upload the generated log shortly.
edit edit:
Code:
# Begin Open GApps Install Log
-----------------------------------------------------------------------------
ROM Android Version | 6.0
-----------------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: The installer detected that your recovery does not support
XZ decompression. Please update your recovery or switch to another one like TWRP.
# Begin User's gapps-config
# End User's gapps-config
Fortunately, flashing my L-gapps seems to have worked fine (...seeeeeems to. I'll see if it works. The setup app did at least update itself, so there's that.)
Is there an easy way to update my TWRP? Any apps that can do this for me?
roach9 said:
Is there an easy way to update my TWRP? Any apps that can do this for me?
Click to expand...
Click to collapse
I know Flashify can do that in many devices, I am not sure about ours, I think best way would be to flash it using fastboot.
Marshmallow recovery can be used to flash lollipop Rom...??..and vice versa...??
Any difference for 2.8.7.4 vs .3 other than the look? Googled it and found nothing.
Sayan44 said:
I know Flashify can do that in many devices, I am not sure about ours, I think best way would be to flash it using fastboot.
Click to expand...
Click to collapse
Why not via TWRP itself? TWRP has a feature to flash an .img directly to boot or recovery.
Sent from my ASUS_Z00AD
I am on 2.8.7.3. I am thinking to flash cm13. Is it necessary to update twrp? Or I can flash cm13 using my old one?
Sent from my ASUS_Z00A using Tapatalk
rex_perfect said:
Marshmallow recovery can be used to flash lollipop Rom...??..and vice versa...??
Click to expand...
Click to collapse
Pretty much, LP version is stable and works for flashing M ROMs.
Sent from my ASUS_Z00A using Tapatalk
espeon said:
This is a bit wonky with device encryption. It'll boot the recovery without a theme loaded and ask for my pattern (as expected). I'll put that in and it'll decrypt and mount storage, then the "put in your pattern" prompt comes up again (this time, with my twrp theme loaded). I can cancel that prompt just fine and it'll sit on the main screen and I can proceed from there, so it's not a showstopper at least.
This didn't happen on 2.8.7.3.
edit: on flashing opengapps 6.0 micro, I'm warned that the recovery is missing the xz binary and can't flash the zip (and told me to update to the latest recovery for my device, lol). I'll upload the generated log shortly.
edit edit:
Code:
# Begin Open GApps Install Log
-----------------------------------------------------------------------------
ROM Android Version | 6.0
-----------------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: The installer detected that your recovery does not support
XZ decompression. Please update your recovery or switch to another one like TWRP.
# Begin User's gapps-config
# End User's gapps-config
Fortunately, flashing my L-gapps seems to have worked fine (...seeeeeems to. I'll see if it works. The setup app did at least update itself, so there's that.)
Click to expand...
Click to collapse
Will look into both issues, I am encrypted currently but without a pin/pattern and don't have that issue.
Sent from my ASUS_Z00A using Tapatalk
So what's the difference of this TWRP and TheSSJ TWRP?
jrior001 said:
Will look into both issues, I am encrypted currently but without a pin/pattern and don't have that issue.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
The 2nd one happened after I decrypted; I forgot to mention that. I don't think it actually happened when I was encrypted using the L-based recovery (I upgraded my recovery, then decrypted, then tried flashing the rom + gapps)
Thread moved to proper forum
jrior001 said:
Will look into both issues, I am encrypted currently but without a pin/pattern and don't have that issue.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Having the same issue actually, not encrypted, worked on .3 no pin or lock on screen either. Happened trying to install the latest Gapps package.
Heavybullets said:
Having the same issue actually, not encrypted, worked on .3 no pin or lock on screen either. Happened trying to install the latest Gapps package.
Click to expand...
Click to collapse
ended up fastboot installing the recovory, didnt work, factory reset, then try it, didn't work, fixing permissions, all that, nothing has worked for me, the latest .4 twrp still comes up with that "The installer detected that your recovery does not support
XZ decompression." Error.
Heavybullets said:
ended up fastboot installing the recovory, didnt work, factory reset, then try it, didn't work, fixing permissions, all that, nothing has worked for me, the latest .4 twrp still comes up with that "The installer detected that your recovery does not support
XZ decompression." Error.
Click to expand...
Click to collapse
well yeah when you have a missing binary reflashing it probably isn't going to do anything, assuming it didn't get corrupted
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD: https://dl.twrp.me/gts210vewifi
BUGS:
If you have found a bug, please consider posting it to our github issues log and then I'll report to Dess_Troy. If you have a significant problem that cannot be answered in this thread, your best bet is to PM Dees_Troy directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][T813] TWRP 3.3.0-0 Touch Recovery [OFFICIAL], ROM for the Samsung Galaxy Tab S2
Contributors
LuK1337, luca020400, Olivier
Source Code: https://github.com/TeamWin
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-01-24
Last Updated 2019-04-15
Wonderful to see this official! Just great!
Flashed!!
It works nicely and looks very good!
Thanks for this beautiful present
link dont work....pls reup...thy
hasbai said:
link dont work....pls reup...thy
Click to expand...
Click to collapse
Is it good now?
yes...the link works...can u make to a TWRP flash mod?
hasbai said:
yes...the link works...can u make to a TWRP flash mod?
Click to expand...
Click to collapse
Flash mod?
Can't you just flash it with heimdall?
sry...i mean twrp zip
hasbai said:
sry...i mean twrp zip
Click to expand...
Click to collapse
Use heimdall or flash the image in twrp ( there's a switch on the bottom I think ).
Hi,
Thanx a lot to bring some love to our Value Edtion :good::fingers-crossed:
Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???
pastorbob62 said:
Dumb question maybe but when I click on the link it takes me "TWRP for gts210vewifi". Thought this was for the SM-T813 9.7" tablet???
Click to expand...
Click to collapse
Yes, that's the codename of it.
Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe
New twrp!!! Flashing it now!!!
varben said:
Just two things I would like to report:
Brightness level doesn't work. It's always max.
Second, not sure if this is a recovery issue, I made a backup of the stock rom. The rom was pin protected, but after restoring it the pin was not recognized. So I had to reset device in order to use the back up. It erased my sd card too, but I had another external backup up of the data, so it was safe
Click to expand...
Click to collapse
>Brightness level doesn't work. It's always max.
I forgot to fix that yesterday, I'll get that sorted out today ~ https://gerrit.twrp.me/#/c/2078
hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now
varben said:
hmm, maybe I did something stupid here. Flashed the new twrp 3.0.3-2 through twrp and the tablet boots only in twrp now... the only selection I saw on which partition to flash was "boot"... so it boots only in recovery now
Click to expand...
Click to collapse
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...
LuK1337 said:
Oh wow, I forgot to add /recovery to fstab. Thanks for reporting this issue...
Click to expand...
Click to collapse
So, if I reflash the rom now without wipes, will it be ok to reboot to system?
varben said:
So, if I reflash the rom now without wipes, will it be ok to reboot to system?
Click to expand...
Click to collapse
Yes.
So, for the moment, who wants to flash this needs to use the official twrp app from play store.
https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en
Edit: @LuK1337 is so fast!!! A new fixed TWRP now! Forget the above...