Hello
My captivate has a broken screen but still working, he wanted me to make him a tv dongle.
And here is the problem I can upload rom but the screen can not see anything I have cable tv-out but by default in rom output tv off.
Is there a rom that is enabled by default, tv out, or could it be somehow turn?
For this you need to have been a kernel of an active USB OTG USB to connect the mouse to operate it.
I write the translator because the English do not know but I hope that I misread what was going on.
Related
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
mrmrmrmr said:
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
Click to expand...
Click to collapse
Connect HDMI cable to MHL adapter, and other end into TV. (duh...)
Plug your charger cable into the MHL adapter. (output won't work without this)
Plug your MHL adapter into Note. (no configuring required!)
Everything you do on your Note will be mirrored on your TV/Screen, at the Note's native 1280x800 resolution. Plain and simple!
Video's that are played via the MHL adapter will be played at their own native resolution, up to and including 1080p.
Enjoy!
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
mrmrmrmr said:
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
Click to expand...
Click to collapse
It's possible that you have a faulty adapter. It should just be plug and play, but you have to make sure that the adapter is receiving external USB power in order for it to work.
ok; it works now.
the micro USB connector was not fully connected...
thanks.
Similar issue
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
mesmerisor said:
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
Click to expand...
Click to collapse
and what rom and kernel are you on ?
I'm on stock running ICS and I get funky results, sometimes it works for a minute or two sometimes just a few seconds. The problem seems to be on the TV, a Sony Bravia, the HDMI setting has to be Wide for picture quality (it has zoom, smart zoom, wide, 16:9 and 4:3) but as soon as there is some glitch in receiving data from the phone the TV begins to scroll through those settings to regain a signal and I can't force a setting on wide for the HDMI connector, only for one of the SCART connectors.
The frustrating part is that it works flawlessly when I connect an Asus Transformer. Could it be the MHL's USB connector? If that is the case how can I check it?
Sent from my GT-N7000 using Tapatalk 2
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Hope this helps someone !!
It didnt help me... my sony bravia 32" tv just wont show the gnote's video. the same adapter works fine on my samsung 32" tv but not on the sony. I have even upgarded the sony tv's firmware too. tried changing to "Wide Zoom" settings and other things but still no video showing, although the tv does know there is something plugged in to HDMI port 1.
Anyone else got ideas?
Samsung doesn't like sony!
sonhy said:
Anyone else got ideas?
Click to expand...
Click to collapse
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
that sux, bluetooth is a standard and im sure there are no variants... they are cheap, so i will buy another one from ebay and see if it is bcos of the adpater and not the TV.
zopilote said:
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
Click to expand...
Click to collapse
That is strange I have the MW-600 unit and it works fine with my Note, Despite, Galaxy Tab2 and Asus Transformer.
Sent from my GT-N7000 using Tapatalk 2
chappatti said:
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Click to expand...
Click to collapse
This did help me using a Galaxy Note and a cheap no-name MHL adapter I bought of eBay. Had it connected to the HDMI input on my Dell WFP3008 monitor.
mhl n7000 camera not starting when connected
hi sorry for posting after 4 years on this thread. is the camera or camera using apps (like skype) working for anyone when the phone is coonected and displaying through mhl to tv? because whenever i try to use camera when i am connected it is not working. on stock 4.1.2. thank you
I'm hacking a portable USB keyboard (from HP iPaq) to work on my note and planning on including USB hub, battery power pack, USB port for flash drive.
I'm also planning on adding HDMI out. I'll either include a switch to go between USB (keyboard etc) and video only or if I can have everything then this will become my "turn Note into a computer" all in one solution when plugged into HDMI monitor/television.
All the pins are there. But I don't know if MHL and USB can be used at the same time. Anyone know or do I have to try it and see what happens?
Blowing up my Note USB chip would not make my day! LOL
PurpleMelbourne said:
All the pins are there. But I don't know if MHL and USB can be used at the same time. Anyone know or do I have to try it and see what happens?
Blowing up my Note USB chip would not make my day! LOL
Click to expand...
Click to collapse
Sorry to rain on your ideas for the second time but not possible. Even if the logic were there to somehow implement both modes, there just is not enough bandwidth on those wires. You only have two twisted pairs and 1080P needs almost all that bandwidth to push enough ones and zeros to fill the screen at 25-30fps.
Your best bet for satisfying that fantasy is bluetooth keyboard and mouse. Think I saw a youtube video yesterday of a guy playing a game through MHL out while controlling through a bluetooth keyboard.
They are mutually exclusive connections at the hardware level, so no software mod can make this possible.
Bluetooth keyboard and mouse are great - check out my youtube channel "AndroidNZ" for a demo on MHL and various uses.
I was already impressed a while back by your video showing MHL video and so I went and bought a connector of my own on ebay
My main focus is to make a little do it all dock for sitting having lunch in a cafe. All built into a wired HP iPaq keyboard. I currently have a Dell Axim bluetooth keyboard and Logitech bluetooth mouse, but they aren't as smooth as I'd like. But the mouse is probably only useful when using a big screen.
So hardware hacking time!
But even if I can't do both, it will be nice to have my phone sitting next to the television with only a short HDMI lead and the phone doesn't flop around because of the stiffness of said HDMI cable as it does currently with my existing octopus setup of leads.
So it will have two modes.
Video mode where the keyboard only acts as a stand, battery pack and video port.
Cafe mode where I have keyboard with stand, USB flash drive, battery pack and USB.
All in a 15cm x 10cm x 2.5cm tidy expanding package :-D
Maybe when the Note 2 comes out with USB 3 we might be able to have both video and USB
oops, duplicate
MHL + OTG Multimedia dock is now available!
Heres the answer to your mhl + otg problem guys but a bit costly!
http://www.ebay.com/itm/Original-Sa...axy-Note-2-N7100-EDD-S20EWEGSTD-/230889526839
who can read is in advantage
this dock station is for the note II and not for the note I.
The pinout is different.
but 1 solution could be plugging in otg then usb hub then the micro usb female to usb A then the Mhl adaptor and the other connector of the hub with the mouse and the keyboard
http://de.focalprice.com/CA0352B/USB_A_Male_to_Micro_USB_Female_Adapter_Black.html
but finally i think it won´t work because there is not enoug voltage and power to get all devices so u need an external power supplier for the hub or an battery connect with the hub. try it out and tell us of your experience
)
alz_uk said:
Heres the answer to your mhl + otg problem guys but a bit costly!
http://www.ebay.com/itm/Original-Sa...axy-Note-2-N7100-EDD-S20EWEGSTD-/230889526839
Click to expand...
Click to collapse
Hello Members, i'm not a developer, but have a Note GT - N7000 uk version running Gingerbread 2.3.6. , so i would very grateful for you help.
I've bought two 'USB On The Go' adapters, one was not Samsung, one is. When i plug in any adapter the phone see's it, if i plug in a mouse or keyboard, wired or wireless the phone reads it saying...keyboard connected or Mouse connected, but no mouse pointer appears, nor does the keyboard types anything.
If i plug in any USB flash drive, it is always read and i can see all the files.
What's going on? I get the feeling ther's nothing mechanically wronge with the phone, but feel it maybe a data issue.
A bluetooth keyboard or mouse has no problems working, but using a keyboard/mouse this way seem's less responsive via bluetooth, than USB wireless.
I've included a screenshot from my 'about' screen, any help would be really helpful.
Kind regards
Livio
Hi,
I am trying to rescue my friends S21. He needs it's content (pics, contacts etc). The screen is totally crashed (he left it on cars roof) I have a Dell Displaylink adapter hooked up to it with USB C. HDMI to my TV shows the lock screen and I have tried to connect wired USB Keyboard, wired Mouse and also a wireless Logitech unified to the Displaylinks USB output.. but I get no reaction and can't access the phone. I have the pin code etc, but right now there is no way I can enter anything. Any ideas what I can try? If I could just have enabled USB debugging I could have used my PC and that program that I can't remember the name of that control both screen and keyboars via USB c.
Kind regards
Tommy
Norway